today i connected my device in fastboot mode and entered this command fastboot -i 0x1ebf oem device-info
it displayed
(bootloader) Device tampered: true
(bootloader) Device unlocked: true
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
OKAY [ 0.008s]
finished. total time: 0.011s
is everything fine with device?
gmsss said:
today i connected my device in fastboot mode and entered this command fastboot -i 0x1ebf oem device-info
it displayed
(bootloader) Device tampered: true
(bootloader) Device unlocked: true
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
OKAY [ 0.008s]
finished. total time: 0.011s
is everything fine with device?
Click to expand...
Click to collapse
Even mine came by default!
No problems
Sent from my AO5510 using Tapatalk
U guyzzzz are lucky.....in 100 pieces only 1 piece us with unlocbootloaderboot
Related
Hi guys,
I need you help : ) My OPT has a flickering display an I'd like to send it in. Therefore, I'd like to restore the factory default settings. Unfourtunatly, I don't know the default OEM Device-Infos. And how to change them.
I have just installed Oxygen OS 2.2.0: OnePlus2Oxygen_14_OTA_011_all_1512111634.zip from http://forum.xda-developers.com/oneplus-2/general/rom-mirrors-official-oxygen-os-roms-ota-t3209863
And these are my Fastboot Device Infos:
C:\adb>fastboot oem device-info
(bootloader) Device tamper: true
(bootloader) Device unlocked: true
(bootloader) Device is_verified: false
(bootloader) Charger scree enable: false
(bootloader) Display panel:
(bootloader) console_locked: 1
(bootloader) exec_console_unconsole: 0
OKAY [ 0.073s]
Finished. Total time: 0.077s
Do you guys know, if I can hand my phone in with an unlocked bootloader or do I need to change these parameters? I would be very pleased for any advise. Thank you : )
frammies said:
Hi guys,
I need you help : ) My OPT has a flickering display an I'd like to send it in. Therefore, I'd like to restore the factory default settings. Unfourtunatly, I don't know the default OEM Device-Infos. And how to change them.
I have just installed Oxygen OS 2.2.0: OnePlus2Oxygen_14_OTA_011_all_1512111634.zip from http://forum.xda-developers.com/oneplus-2/general/rom-mirrors-official-oxygen-os-roms-ota-t3209863
And these are my Fastboot Device Infos:
C:\adb>fastboot oem device-info
(bootloader) Device tamper: true
(bootloader) Device unlocked: true
(bootloader) Device is_verified: false
(bootloader) Charger scree enable: false
(bootloader) Display panel:
(bootloader) console_locked: 1
(bootloader) exec_console_unconsole: 0
OKAY [ 0.073s]
Finished. Total time: 0.077s
Do you guys know, if I can hand my phone in with an unlocked bootloader or do I need to change these parameters? I would be very pleased for any advise. Thank you : )
Click to expand...
Click to collapse
It's fine as it is - read this
Hi,
Earlier on today I was trying to root my phone (Well at least put TWRP on so I could mount a rom) and somehow the bootloader got locked during the process this has prevented me to install any roms....
I know it's locked because of -
(bootloader) Device tampered: true
(bootloader) Device unlocked: false
(bootloader) Device is_verified: false
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
(bootloader) console_locked: 1
(bootloader) exec_console_unconsole: 0
OKAY [ 0.079s]
finished. total time: 0.080s
I've tried to recover it back to normal during the "Fastboot Mode" state but not had any luck I believe the phones bricked? -
C:\Users\Liam\Desktop\One Plus Recovery\A2001_14_A.03_150805>fastboot flash user
data userdata_64G.img
target reported max download size of 536870912 bytes
erasing 'userdata'...
FAILED (remote: device is locked. Cannot erase)
finished. total time: 0.003s
I need this sorting as I don't have a phone to use, and would really apreiciate if someone could help me as i've spent like 8 hours today trying to sort it but not had any luck i've downloaded drivers (Qualcom), Android SDK, this Qualcom-download-tool for recovery and nothing seems to work
It will only boot into "Fastboot Mode"
i recommand you to ask this on OnePlus forums there is more people that answer
otherwize did you tried fastboot oem unlock and is your phone recognize by your computer ?
Use the Qualcomm recover method mentioned many times over in this forum.
try fastboot oem unlock.
did u enabled oem unlock option in dev settings while unlocking bl?
what exactly steps you followed?
My op2 is running Oxygen Os v.3.0 [A2003]. The problem i'm having is my device doesn't have recovery. I tried to flash recovery but couldn't unlock oem. fastboot oem unlock gives the below message:
E:\Android\OP2>fastboot oem unlock
...
OKAY [ 0.000s]
finished. total time: 0.000s
Click to expand...
Click to collapse
But when I run fastboot device-info it gives the below message:
fastboot oem device-info
...
(bootloader) Device tampered: true
(bootloader) Device unlocked: false
(bootloader) Device is_verified: false
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
(bootloader) console_locked: 1
(bootloader) exec_console_unconsole: 0
OKAY [ 0.078s]
finished. total time: 0.078s
Click to expand...
Click to collapse
And thus unable to flash recovery.
E:\Android\OP2>fastboot flash recovery stock.img
target reported max download size of 536870912 bytes
sending 'recovery' (28144 KB)...
OKAY [ 0.671s]
writing 'recovery'...
FAILED (remote: device is locked. Cannot flash images)
finished. total time: 0.702s
Click to expand...
Click to collapse
I searched in internet and found few solutions but it was for A2001 OP2 device and there was no qualacomm drivers for A2003.
Whenever my OP2 shutdowns and i restart it is stuck on oneplus logo and i need to plug it into my pc and use fastboot continue command to run it smoothly.
The model number doesn't matter, it only shows where the phone was intended to sell. You can try any tutorial that is for Oneplus2.
Hi
I'm trying to get the device id from fastboot. The message I get is
Code:
FAILED (remote: unknown command)
. I am able to run fastboot oem device-info without issues.
Code:
da:~# fastboot oem device-info
...
(bootloader) Device tampered: false
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
OKAY [ 0.101s]
finished. total time: 0.101s
Code:
da:~# fastboot oem device-id
...
FAILED (remote: unknown command)
finished. total time: 0.055s
Has anyone had success with this command?
bludhemn said:
Hi
I'm trying to get the device id from fastboot. The message I get is
Code:
FAILED (remote: unknown command)
. I am able to run fastboot oem device-info without issues.
Code:
da:~# fastboot oem device-info
...
(bootloader) Device tampered: false
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
OKAY [ 0.101s]
finished. total time: 0.101s
Code:
da:~# fastboot oem device-id
...
FAILED (remote: unknown command)
finished. total time: 0.055s
Has anyone had success with this command?
Click to expand...
Click to collapse
Did you ever figure this out? I'm also having this issue on my H910 Att V20.
I already did the same on other phones, but I can't with this lavender:
I boot in fastboot mode and I run `fastboot oem device-info` to check status:
Code:
$ fastboot oem device-info [15:20:59]
(bootloader) Verity mode: true
(bootloader) Device unlocked: true
(bootloader) Device critical unlocked: true
(bootloader) Charger screen enabled: false
OKAY [ 0.001s]
Finished. Total time: 0.001s
And it seems ok.
Now I try
Code:
$ fastboot flash recovery recovery.img
and it stuck there and it don't do anything.
I tried different PCs and different cables, nothing make it works!
Normally it only lasts some seconds...
What should I try?
Thanks in advance :silly: