Related
Hi Team,
I on a Samsung Galaxy S4 GT i9400 running on (Hassan Version V6.0) 4.4.2 .
I installed a custom ROM (Hassan Version V6.0) and i a few issue and i am not sure how to fix this.
1) The mute switch when on call is missing "Should i try installing a new customer ROM for it or can i fix it ?"
2) My battery life is really bad on the device "Not even a hour i understand the team worked hard for developing the ROM, but it would really nice if someone comes up with a fix for it"
3) I also want to know what are the different types of ROM i read on some forum there different types of ROM i.e, Milestone, Stable etc. "Can i also know the their spec too so it would be easier for me to download the best one i want/like"
4) if i on a customer ROM 4.4.2/4.4.3 without Gapps. Should i install Gapps 4.4.2/4.4.3 on it or is it really not important.
Any help is much appreciated.
Thanks in Advance.
Regards,
Tarun.
@Tarun.B
1) try another ROM if it's that important to you
2) it depends on how you use it and what processes are running in the background : try greenify
3)
a) I refer you to the CM teams about page http://www.cyanogenmod.org/about
b)what do you mean by spec? and if you're talking about the features please Read the details of the ROM yourself
(there are important details about installation ... bugs .....etc)
4)it depends on the ROM if it's a stock TW ROM then you really don't need to flash a seperate Gapps package (unless stated) as they come packaged with the ROM or if on AOSP(PA,CM,AOKP) most of the time you need to download a seperate gapps package I.E. Play Store,Maps.... etc (basically if you like to install applications and/or like to use your android phone then yes it is necessary)
note: snapshots have replaced Stable and RC and M builds so snapshots and nightly builds are what you should look for...... :good:
P.S. if I helped you hit the :good: button on the bottom left
nick123ablxx32 said:
@Tarun.B
1) try another ROM if it's that important to you
2) it depends on how you use it and what processes are running in the background : try greenify
3)
a) I refer you to the CM teams about page http://www.cyanogenmod.org/about
b)what do you mean by spec? and if you're talking about the features please Read the details of the ROM yourself
4)it depends on the ROM if it's a stock TW ROM then you really don't need to flash a seperate Gapps package (unless stated) as they come packaged with the ROM or if on AOSP(PA,CM,AOKP) most of the time you need to download a seperate gapps package I.E. Play Store,Maps.... etc (basically if you like to install applications and/or like to use your android phone then yes it is necessary)
note: snapshots have replaced Stable and RC and M builds so snapshots and nightly builds are what you should look for...... :good:
P.S. if I helped you hit the :good: button on the bottom left
Click to expand...
Click to collapse
@nick123ablxx32,
Thank you for you reply.
1) try another ROM if it's that important to you---- I am actually working in company, too many Conference calls which would really need a mute switch for me.
2) it depends on how you use it and what processes are running in the background : try greenify ----------------(I will try this thnx )
3.b) what do you mean by spec?-------------- i am sorry if you got me wrong i meant if the ROM say Stable/Nite___ what does that mean so that i learn about ROMs
4) Arrow ROM v13.0.0 | Fast | Stable | Smooth | Best Battery Life | Custom Settings will this be compatible for my device-- If you don't mind can you give me download link for V13.0.0 because i am really not sure were the download link is on the page.
Thank
Regards,
Tarun
Tarun.B said:
@nick123ablxx32,
Thank you for you reply.
1) try another ROM if it's that important to you---- I am actually working in company, too many Conference calls which would really need a mute switch for me.
2) it depends on how you use it and what processes are running in the background : try greenify ----------------(I will try this thnx )
3.b) what do you mean by spec?-------------- i am sorry if you got me wrong i meant if the ROM say Stable/Nite___ what does that mean so that i learn about ROMs
4) Arrow ROM v13.0.0 | Fast | Stable | Smooth | Best Battery Life | Custom Settings will this be compatible for my device-- If you don't mind can you give me download link for V13.0.0 because i am really not sure were the download link is on the page.
Thank
Regards,
Tarun
Click to expand...
Click to collapse
ok sure ..... here it is http://sh.st/eHFAb it was in post#2 .... good luck :good:also make a backup (just in case)
Tarun.B said:
@nick123ablxx32,
Thank you for you reply.
1) try another ROM if it's that important to you---- I am actually working in company, too many Conference calls which would really need a mute switch for me.
2) it depends on how you use it and what processes are running in the background : try greenify ----------------(I will try this thnx )
3.b) what do you mean by spec?-------------- i am sorry if you got me wrong i meant if the ROM say Stable/Nite___ what does that mean so that i learn about ROMs
4) Arrow ROM v13.0.0 | Fast | Stable | Smooth | Best Battery Life | Custom Settings will this be compatible for my device-- If you don't mind can you give me download link for V13.0.0 because i am really not sure were the download link is on the page.
Thank
Regards,
Tarun
Click to expand...
Click to collapse
Hi,
I'll get that you typed wrong in the OP and your device isn't i9400 but i9500 .
1 - Well then, the best would be check for other ROM indeed, I never used it so I don't really know any that have this feature.
2 - Another thing you should try doing is turning off sync, 3G/WiFi, Bluetooth, NFC, sensors (eye tracking, etc) when possible, and if you're on a Touchwiz based ROM, enable power saving mode. Don't forget to also charge your device correctly, using the factory charger and always when possible full charging it!
3 - Stable: The ROM shows no bugs at all, and is usable as daily driver without any issues.
Release Candidate (RC): The ROM is a possible stable version.
Snapshot: This usually built once every month and is more stable than Nightly. Has latest features.
Nightlies: Are the first ROMs to have the features, but may be unstable and might lead to a brick.
In stability order:
Stable >= RC > Snapshot > Nightly.
Recently Snapshots are considered the most updated and also stable, due to others almost not being released anymore. So if you want the best I'd recommend a Snapshot.
4 - The download links are in the second post. Make sure you read the ENTIRE OP!!! (Here's it anyway: http://sh.st/eHFAb)
~Lord
Temasek Unofficial CM12
Disclaimer
Code:
[SIZE="1"]/*
* Your warranty is not void - from Xiaomi.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/[/SIZE]
Features
Code:
[SIZE="1"]Disable scrolling cache
Heads Up Notifications
Configurable lockscreen shortcuts
Clock alignment
Network traffic meter
Status bar weather
Launch Superuser from Settings
Launch SuperSU from Settings
Navigation bar height
Enable/disable VOLUME rocker wake
Setting: add app move to external storage
Settings: allow home button to wake device
Settings:DPI Settings/Display density[/SIZE]
How To Flash
[*]Boot into recovery
[*]Factory reset, wipe everything except sdcard
[*]Install rom/gapps on system 1
[*]Boot into system 1
[*]
Issues
[*]mm-qcamera-daemon bug - camera randomly disconnected
[*]video cam not working
[*]random reboot
[*]slow charging time for some
[*]compas
[*]
Download Moved To 2nd Post
Change Log
Mostly here what's important
https://github.com/temasek/android_frameworks_base/commits/cm-12.0
https://github.com/temasek/android_packages_apps_Settings/commits/cm-12.0
cm/temasek upstream changes to date
http://forum.xda-developers.com/showpost.php?p=59048306&postcount=339
http://forum.xda-developers.com/showpost.php?p=58876450&postcount=262
http://forum.xda-developers.com/showpost.php?p=58580618&postcount=132
Additionally can look About Phone - Changelog
Credit
@temasek, @CyanogenMod, CancroCM Dev, Community
XDA:DevDB Information
Temasek Unofficial CM12, ROM for the Xiaomi Mi 3
Contributors
audahadi, temasek
Source Code: https://github.com/temasek
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-01-25
Last Updated 2015-01-25
Device Tree : https://github.com/audahadi/android_device_xiaomi_cancro
Vendor Tree : https://github.com/audahadi/proprietary_vendor_xiaomi
Kernel Source :https://github.com/kernel-hut/android_kernel_xiaomi_cancro/tree/cm-12.1
Download
Latest :cm-12.1-20150624-UNOFFICIAL-temasek-cancro
Older : Mi3W Temasek Unofficial Build
Download (Stock Partition)
Xiaomi MI 3W_Temasek Unofficial CM12_Stock Partition
Recommended Gapps
Banks Minimal Gapps
Usefull Link
How to Be a Good Custom ROM or Kernel User
Re-partition system
Tired of low system partition? Try this and say goodbye to dualboot.
http://forum.xda-developers.com/showpost.php?p=58591075&postcount=29
This is one of the best CM12 ROMs and my favorite too. Thank you @audahadi Sir for this excellent work.
Thanks man
but this build doesn't works with clean flash right one has to flash 18 build to get it working ??
or can we go for the clean flash ??
This rom is great Love it
Hat's off to all the devs who put their time and effort in building this great ROM that to w/o any kernel source.
Occasional reboots and the slow charging (for some people including me ) are the two major issues. The former one is of generic kind but the latter I think can be fixed on upcoming builds.
Below findings are from 19-01 Temsek build.
Slow charging issue can temporarily be fixed by first connecting the charger and then rebooting. After the reboot, it will charge normally (1000mA-1.100mA input current), but if charger is disconnected for some reason. Then on re-connecting the charger, it will charge like USB(250mA - 350mA).
Hi OP
Can u post the title thread with your device model?
Thanks
WOW!
Thanks all open source community to helping forgotten customers of this great ROM but released from wrong company.
Thanks and hats off to all
I hope things will get better if (ever) Xiaomi release kernel code.
I want try this but can anyone make "review". Is still mm-qcamera persist?
I tried 0117 build and it was so bad (sorry). I couldn't use my phone. I really want try smooth Lollipop build and use it on daily basis...
P.s. you maybe want sign petition :good:
Regards and once again - thank you guys!
Thank you, according to your tutorial does not know what is the problem stuck in the boot animation, but in the previous rom direct coverage can be done startup the update now has Use the up very smooth, thank you again.
clean flashed cm-12-20150123-UNOFFICIAL-temasek-cancro and I am stuck at bootanimation for something like 30 minutes... how can I fix?
thanks in advance!
EDIT: problem fixed. I manually replaced boot.img from the 23/Jan build zip with the one contained in blisspop, then reflashed. now it booted up properly
will test the rom thanks for that.
moly82 said:
clean flashed cm-12-20150123-UNOFFICIAL-temasek-cancro and I am stuck at bootanimation for something like 30 minutes... how can I fix?
thanks in advance!
Click to expand...
Click to collapse
Well I think you miss the party here ?
Flash audahadi's cm12 20150118 build first, let it boot (if you can't wait just wait till the screen dim since long boot time may happen) and boot to recovery ( by either normal reboot from power menu or force-reboot by holding volume up and power) and dirty flash temasek latest build.
Edit: late reply ?. Maybe will be useful for those who just download-and-flash like me ?
SkipperRyujin said:
Well I think you miss the party here ��
Flash audahadi's cm12 20150118 build first, let it boot (if you can't wait just wait till the screen dim since long boot time may happen) and boot to recovery ( by either normal reboot from power menu or force-reboot by holding volume up and power) and dirty flash temasek latest build.
Edit: late reply ��. Maybe will be useful for those who just download-and-flash like me ��
Click to expand...
Click to collapse
found the solution, please see my edit in my previous post much easier than download another rom, and flash over it. thanks anyway!
moly82 said:
found the solution, please see my edit in my previous post much easier than download another rom, and flash over it. thanks anyway!
Click to expand...
Click to collapse
Yes I see, that why I also edited my post ?
Actually you can also dirty flash from blisspop
@OP, sorry for spamming
Maybe some useful reviews?
mm-qcamera still here? Can someone report random reboot?
sudy_freak said:
Maybe some useful reviews?
mm-qcamera still here? Can someone report random reboot?
Click to expand...
Click to collapse
will report after testing.. reboots are there for sure btw, as all the other 5.0 roms.... ;( in OP already you can see known bugs btw
EDIT: I don't seem to find the option for switching tracks with volume buttons with screen locked (one of th emost important features for me), is it not included in temasek maybe? thanks! (a part from this, I like this rom, it has many features, much better than CM!! :good: )
Wow a great rom for MI3W. No random reboots yet and no camera daemon bug. deep sleep is working flawless. Totally superb.
sarath medithi said:
Wow a great rom for MI3W. No random reboots yet and no camera daemon bug. deep sleep is working flawless. Totally superb.
Click to expand...
Click to collapse
That's great. Please update your "review" if you find something new
could you please create the updated zip file and and please upload it to gdrive. it will be very beneficial for everyone so that we don't have to download two different CM roms and then manually replace the file. which never worked for me.
cosmicsatish said:
could you please create the updated zip file and and please upload it to gdrive. it will be very beneficial for everyone so that we don't have to download two different CM roms and then manually replace the file. which never worked for me.
Click to expand...
Click to collapse
no need to download two roms, as said above, just download the latest temasek build (from 23/Jan) and the boot.img contained in the blisspop rom (there is a direct link for it in the other lollipop threads). then put this file in the temasek zip, overwriting the one you have inside, and flash. boot will be very fast
look here for even more info on how i did that, if you need!
edit: here is link for blisspop's boot.img thanks to a guy in another thread
https://www.dropbox.com/s/zntpik17251pcob/boot.img?dl=0
AOSP ROM for Explay Fresh/Wiko Rainbow and clones.
Code:
#ifndef DISCLAIMER_H
#define DISCLAIMER_H
#endif
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Working:
Everything
Flash Instructions:
Backup
Download fresh_l1_stable.rar
Unpack fresh_l1_stable.rar
Flash ROM with SP Flash Tool(use Firmware Upgrade mode)
WARNING! ROM doesn't contain SuperSU or custom recovery. You need your own
Enjoy
XDA:DevDB Information
[ROM][S5501]Lollipop[Wiko Rainbow][UNOFFICIAL], ROM for the Android General
Contributors
ariafan
Source Code: https://github.com/ariafan/S5501-3.10
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Wiko Rainbow or clone
Based On: AOSP
Version Information
Status: Abandoned
Current Stable Version: Stable #1
Stable Release Date: 2016-06-03
Created 2015-07-11
Last Updated 2016-06-22
Changelog:
Code:
[B][SIZE="4"]Stable:[/SIZE][/B]
Added support for Toshiba TYC0FH121597RA eMMC chip(some devices can't boot on previous version)
Added Google apps
Added experimental touchpanel features
Added Explay bootlogo and bootanimation
[B][SIZE="4"]RC1:[/SIZE][/B]
Rebase to ALPS.L1(Android 5.1)
All HW bugs fixed.
[B][SIZE="4"]Beta #5:[/SIZE][/B]
Fixed bug with flipped front camera
Changed encryption mode
Fully working TWRP 2.8.7.0(wipe, backup/restore and zip install are tested)
Waves MaxxAudio included in ROM
[B][SIZE="4"]Beta #4.5:[/SIZE][/B]
Gapps now included in ROM
Black frames fixed
Removed 3G/G icons from statusbar
Now russian letters in dialer removed from english resources
Fixed auto-brightness(now screen doesn't goes black)
Small patches from MTK
[B][SIZE="4"]Beta #4[/SIZE][/B]
Revert back internal memory
External SD-card is default memory
Small bug fixes
[B][SIZE="4"]Beta #3.5:[/SIZE][/B]
Front camera now working on all devices
Repartitioning(2Gb for Userdata partition)
Internal memory removed(now uses only SD card)
Update to 5.0.2(Google and Mediatek patches included)
All rotations allowed in apps and lockscreen(launcher not included)
Enabled Wireless display
PhilZ Touch is default recovery
Screen Record (thx to @Shahbaz23 )
Easy flash tutorial and video preview(thanks to @smokerman )
Good work!! :good:
[*]Flash GAPPS 5.0(take here http://forum.xda-developers.com/showpost.php?p=59691695&postcount=3)
which gapps we should take please provide direct downloading link.
shubham tech said:
[*]Flash GAPPS 5.0(take here http://forum.xda-developers.com/showpost.php?p=59691695&postcount=3)
which gapps we should take please provide direct downloading link.
Click to expand...
Click to collapse
You can select any GAPPS for Android 5.0.x. For example, minimal version - https://www.androidfilehost.com/?fid=95916177934550850
Hey, OP! I built the kernel 3.10.72 and it works in the recovery. I don't know what to do next?
I'm trying to run the CM12, but I see only LOGO.BIN. Please help me.
View attachment dmesg.log
View attachment logcat.txt
hyperion70 said:
Hey, OP! I built the kernel 3.10.72 and it works in the recovery. I don't know what to do next?
View attachment 3400804
I'm trying to run the CM12, but I see only LOGO.BIN. Please help me.
View attachment 3400806
View attachment 3400807
Click to expand...
Click to collapse
You should compile full rom because you need update vendor binaries and libraries(hwcomposer, gralloc etc)
How is battery-drain?
GPS working?
Is it based on Android 5.0.0 or 5.0.2?
Lecterr said:
How is battery-drain?
GPS working?
Is it based on Android 5.0.0 or 5.0.2?
Click to expand...
Click to collapse
Battery - better than cm12
GPS - working fine(for me)
It's a 5.0.2 based rom
goood work bro (Y)
ariafan said:
Battery - better than cm12
GPS - working fine(for me)
It's a 5.0.2 based rom
Click to expand...
Click to collapse
Perfect - and is there a way back to STOCK Rainbow 4.4.2?
Lecterr said:
Perfect - and is there a way back to STOCK Rainbow 4.4.2?
Click to expand...
Click to collapse
Flash wiko rom with sp flash tool(firmware upgrade mode)
Hello @ariafan, I am using My|Phone Agua Rio, and I believe that I do correctly the installation process that you've indicated in your thread, It had a problem on the camera app, Only the front cam is working and it theres no switch to main cam, its almost perfect and that's the only problem that I've encountered. How can I fix this? By changing libs from our cam to this?
sent from my My|Phone Agua Rio using XDA Free mobile app
Kyzrael said:
Hello @ariafan, I am using My|Phone Agua Rio, and I believe that I do correctly the installation process that you've indicated in your thread, It had a problem on the camera app, Only the front cam is working and it theres no switch to main cam, its almost perfect and that's the only problem that I've encountered. How can I fix this? By changing libs from our cam to this?
sent from my My|Phone Agua Rio using XDA Free mobile app
Click to expand...
Click to collapse
Pls wait some. I'm working on this problem
Lecterr said:
Perfect - and is there a way back to STOCK Rainbow 4.4.2?
Click to expand...
Click to collapse
flash kitkat using sp flash tool
choose firmware upgrade r format+download
So here is my review
Firstly i tried same method on mmx a120 (as given by op)
bt it stucked on system.img @ 30%........i understand that it was unable to write
so again tried many way bt same........then i tried with all files loaded except system,cache,data
and booted to custom recovery
as soon i started flashing....it's stuck on 50% flashing.....1/2 hrs +
so i guess something was wrong....so i again ported philz recovery from mmx a106 bt same.....then i understood ....it was not able to flash .dat file.......so for this fix.......i unpacked,packed with meta-inf just like cm 12.1 how i ported from kingzone k1 on mt6592 (second device )
finally flashed fully and i was able to boot rom
i restore imei and everything is seems working great
except proximity issue...(remains 0 value )....i tried to boot into factory mode bt since there is new uboot.bin i guess it's missing.....
Overall Grt Work Bro
hope u soon fix remaining bug and proximity issue (else my dad gonna kill me )
Awesome Work mate
@ariafan Thanks for the rom...great work man..
I already have the pa gapps 5.0 package(which works with cm 12) will that works with this rom
niyas90 said:
@ariafan Thanks for the rom...great work man..
I already have the pa gapps 5.0 package(which works with cm 12) will that works with this rom
Click to expand...
Click to collapse
I think it should work
ariafan said:
I think it should work
Click to expand...
Click to collapse
Yes is works...
Completed the flashing ..everything working smoothly as said in the OP...
Once again thanks mate...
brother ariafan i loved ur rom its awesome
thanks a lot for the rom
for me both front camera n back camera are working
focus not working
and can u pls add the feature of moving apps to sd card pls n all apps doesnt save the data in external sd card
like whatsapp ,uc browser downloads to internal sd card nif i set download path to external sd card it shows no permission
can u pls fix this bro
i loved ur rom like anythng
thanks a lot lot for ur work n amazng rom
Hello Everyone
Since DEVDB is not accepting "Redmi Note 3" I am starting this thread to share all the best ROM's, Tweaks & tricks for the Helios-X10 based Hennessy
All link's & uploads will be posted in this OP once the thread is approved.
0) XIAOMI.EU 7.2.3.0 ROM (Stable & Developer) (no China apps, Rooted, Xposed, Gapps) - THIS IS THE BEST!
1) China ROM - Official (Stable & Developer) UPDATE mode (full of China apps, no Root, no Gapps)
2) China ROM - Official (Stable & Developer) - MIUI 7.1.8.0, SP Flash tools mode (full of China apps, no Root, no Gapps)
3) Global ROM - SphinX v2b ManhIT (MIUI 7.1.3.0 Stable with SwiftKey, SuperSU, GApps & no China apps)
4) Global ROM - by LoXar (MIUI 7.1.6.0 Stable with Super SU2.66, GApps, & no China apps)
5) sMIUI ROM Kitchen (needs custom Recovery - by Handam000)
6) sCM12.1 Unofficial for RN3
Hacks & Tweaks
1) Fingerprint Sensor fix by Shade5
2) Un-brick your Redmi Note 3 if SPFlashTools failed
3) Restore/Change IMEI number
Coming up...
Tweaking 2G/3G/4G band settings , Battery Tweaks , Rooting, SuperSU, GApps ,Unlocking Bootloader
Enjoy!
Shade5
This will activate the hardware of your Fingerprint sensor if you've flashed the SphinXv2b Stable_Redmi_Note3_MIUI7.1.3.0_Global_ManhIT ROM and found the Fingerprint sensor not working...
All steps are same as you did for flashing the ROM (screenshot & instructions are also in the zip folder)
First download my Fix attached here & unzip it on your desktop
1) Use SP_Flash_Tool_v5.1516.00 (not included - use the same one which you flashed your ROM with)
2) select Download Agent (DA_SWSEC.BIN) in the FLASH TOOL folder
3) find Scatter file (MT6795_Android_scatter.txt) in the IMAGES folder
However
4) Only untick SYSTEM & USERDATA ,keep the rest selected
Now flash away as normal & reboot once done....
This fix will not affect your apps/data & will immediately ask you to enter your fingerprint - only this time... IT WORKS :good:
IF for any reason you managed to "brick" your phone, just flash the stock China ROM again from the OP or follow the un-brick link for more instructions
Enjoy!
Shade5
Reserved 2
Reserved 3
Hi,
I've just tried the fingerprint solution but unfortunately it still dosn't work. What does your fix actually do? Is there anything else I can try?
Thanks
zms786 said:
Hi,
I've just tried the fingerprint solution but unfortunately it still dosn't work. What does your fix actually do? Is there anything else I can try?
Thanks
Click to expand...
Click to collapse
Hi ZMS...
Firstly just to be sure - did you SPTools flash the SphinX v2b ROM?
After that if you flash my files exactly as per the screenshot I have put in the folder, the Fingerprint sensor driver's get installed.
(BTW on my 16gb the SphinX v2b works but it didn't work on the 32GB, so I made this fix.zip)
I found this ROM was the cleanest n best hence I made this fix (rather than flashing the Chinese or LoXar rom)
Let me know how it goes for you
Hi
I followed your instructions as described and flashed with spflash tool. I will try again and also tried to reboot it but that didn't work. Is there anything else I can check?
That's strange!
Mine (3G/32G) came with SphinX V1 installed and I moved to V2b without any issue.
.I then flashed LoXar 7.1.6.0 on it with SPflashtool (following MIUI EU trend) and live with it now.
No big sensible difference between the two versions, and finger print is working best from the beginning .
Why not to try Loxar and check if issue is solved and in case it will still be present to clean the phone with a China dev version and reapply SphinX as ultimate check.
Edit:
Thanks again to you @ Shade5 for opening this thread
My rn3 bricked
Shade5 said:
This will activate the hardware of your Fingerprint sensor if you've flashed the SphinXv2b Stable_Redmi_Note3_MIUI7.1.3.0_Global_ManhIT ROM and found the Fingerprint sensor not working...
All steps are same as you did for flashing the ROM (screenshot & instructions are also in the zip folder)
First download my Fix attached here & unzip it on your desktop
1) Use SP_Flash_Tool_v5.1516.00 (not included - use the same one which you flashed your ROM with)
2) select Download Agent (DA_SWSEC.BIN) in the FLASH TOOL folder
3) find Scatter file (MT6795_Android_scatter.txt) in the IMAGES folder
However
4) Only untick SYSTEM & USERDATA ,keep the rest selected
Now flash away as normal & reboot once done....
This fix will not affect your apps/data & will immediately ask you to enter your fingerprint - only this time... IT WORKS :good:
Enjoy!
Shade5
Click to expand...
Click to collapse
i follow this just after i flashed v2b, now my RN3 wont even start, i tried to flash it again with v2b, but the sp tool keeps showing error
PLEASE HELP!!!!!!!!!!!
Shade5 said:
However
4) Only untick SYSTEM & USERDATA ,keep the rest selected
Now flash away as normal & reboot once done....
Shade5
Click to expand...
Click to collapse
It's important to untick "preloader" too ! When you don't do that, there's a risk, that your device bricks. You always have to do that when you flash non-stock things with SP-Flashtool.
Btw. What's with custom roms for the Redmi Note 3 ? They should be in your first post too...
Is the xposed useful if I install
Sent from my Redmi Note 3 using Tapatalk
if only you said that earlier
Cameo164 said:
It's important to untick "preloader" too ! When you don't do that, there's a risk, that your device bricks. You always have to do that when you flash non-stock things with SP-Flashtool.
Click to expand...
Click to collapse
man, if only you said that earlier... my RN3 now bricked, it wont turn on,.. can you give me a solution ? please..:crying:
can any body please post another link for : 4) Global ROM - by LoXar (MIUI 7.1.6.0 Stable with Super SU2.66, GApps, & no China apps)
?
Thank you.
Davidfi1 said:
can any body please post another link for : 4) Global ROM - by LoXar (MIUI 7.1.6.0 Stable with Super SU2.66, GApps, & no China apps)
?
Thank you.
Click to expand...
Click to collapse
Here you have. But what's so bad with registering at the MIUI forum so that you can download it from there?
https://mega.nz/#!jNYylDBJ!ZSmwZALOiucQgQTidEqIrjSnIXtWCu14KpTNf2wjVSY
---------- Post added at 20:14 ---------- Previous post was at 19:30 ----------
isfanl said:
man, if only you said that earlier... my RN3 now bricked, it wont turn on,.. can you give me a solution ? please..:crying:
Click to expand...
Click to collapse
Try to reflash SphinX Rom ( http://en.miui.com/thread-207019-1-1.html ) and pay attention that you untick "preloader". Good Luck. :fingers-crossed:
And when this isn't working, try this method: Use SP Tool V5.1516 for flashing the rom (Untick preloader!!). Instead holding only the Vol Down button, Hold Both Vol Down + Power button when plugging the usb cable in. The progress bar should turn yellow and the flash should be completed. Turn on the device, it will take some time, but it should work.
Cameo164 said:
Here you have. But what's so bad with registering at the MIUI forum so that you can download it from there?
https://mega.nz/#!jNYylDBJ!ZSmwZALOiucQgQTidEqIrjSnIXtWCu14KpTNf2wjVSY
Click to expand...
Click to collapse
I did register at the MIUI forum - the problem is with the mega link is not working here for some reason ....
Thank you.:good:
David.
Does anyone have RN3 like me on that picture..
elol said:
Does anyone have RN3 like me on that picture..
Click to expand...
Click to collapse
I have the 3GB RAM version but I had that MIUI version on my device when I bought it too. It's an unofficial shop version. I would switch to an official MIUI version because your version doesn't get updated. I can recommend the latest developer version 6.1.29.
Cameo164 said:
I have the 3GB RAM version but I had that MIUI version on my device when I bought it too. It's an unofficial shop version. I would switch to an official MIUI version because your version doesn't get updated. I can recommend the latest developer version 6.1.29.
Click to expand...
Click to collapse
How can I flash it?its only use update.zip on sd card or need to use pc or laptop..sory for noob question
zms786 said:
Hi
I followed your instructions as described and flashed with spflash tool. I will try again and also tried to reboot it but that didn't work. Is there anything else I can check?
Click to expand...
Click to collapse
I'd need some info before I can help you out....
1) Is your phone 16 or 32 GB?
2) What was the initial ROM version on it
3) Did you flash the CHINA stable ROM before the SphinX v2b?
lolo9393 said:
That's strange!
Mine (3G/32G) came with SphinX V1 installed and I moved to V2b without any issue.
.I then flashed LoXar 7.1.6.0 on it with SPflashtool (following MIUI EU trend) and live with it now.
No big sensible difference between the two versions, and finger print is working best from the beginning .
Why not to try Loxar and check if issue is solved and in case it will still be present to clean the phone with a China dev version and reapply SphinX as ultimate check.
Edit:
Thanks again to you @ Shade5 for opening this thread
Click to expand...
Click to collapse
Hi @lolo9393 , glad the thread is catching on
Some Redmi's are "pre-flashed" with shop-rom's that have Play store
These versions dont register the fingerprint driver's once flashed
I have both 16GB (China, Stable stock, no Play store) & 32GB(Singapore, stable ROM with Play store) RN3's
My fix only re-flashes these (which you didn't as your stock driver's were still working)
Hi,
Here's is SlimROM for the Xiaomi mi5s Plus aka Natrium.
This has been taken directly from the SlimROM Github with the device tree from Lineage...
I would like to stress that, without the magnificent work done by Luk1337 on the device source, this could never come true !
As many will know, SLIMROM is one of the oldest ROM on the custom ROMs planet. It's a really sleek one : do not expect a ROM loaded with customization options. It's simple : there are almost none.
But what you get is a small and smooth ROM that will take you close to pure Android experience.
So what has been tested here :
- FINGERPRINT => working ;
- RINGTONES => working (but beware : select a ringtone to have a sound !) ;
- NOTIFICATIONS SOUND => working (same as for ringtone : select a notification sound) ;
- INCOMING CALLS => working ;
- OUTGOING CALLS => working ;
- WI-FI => working ;
- BLUETOOTH => working ;
- NFC => working ;
- GPS => working (but I think my device has a hardware problem on this, so can't tell for sure) ;
- YouTube, Play Music... => working ;
- CAMERA PICTURE => working ;
- CAMERA MOVIES => working ;
- DEVELOPER OPTIONS => working (fixed).
- ABILITY TO CUSTOMIZE HARDWARE BUTTONS => not working (I'm in touch with more skilled devs to iron this out !) ;
- BRIGHTNESS SETTING : works, but I think the scale is somewhat wrong (doesn't dim further when there still way to go) ;
- TRANSFORMERS GAME => crashing randomly (Adreno blob problem it seems !)...
This is all I have tested so far, but I'm sure you guys will find out other things not working.
If so, please remember that I ain't no dev and that I only offer this "as is".
Also : my device is going to ad site soon (hardware malfunction reported above) so this may well be the one and only build available. If someone is willing to build further in case I suspend it... I'll try to help.
LINK TO ROM ON AFH : https://www.androidfilehost.com/?fid=745425885120724892
LINK TO ROM ON Google Drive : https://drive.google.com/open?id=0Bz7S7jFQDiz8YVhEalFMNUx0S1E
Enjoy...
Best regards.
XDA:DevDB Information
Slim ROM, ROM for the Xiaomi Mi 5s Plus
Contributors
NexusPenguin, NexusPenguin
Source Code: https://github.com/SlimRoms
ROM OS Version: 7.x Nougat
Version Information
Status: Testing
Beta Release Date: 2017-04-14
Created 2017-04-17
Last Updated 2017-04-17
Reserved
CAUTION :
It seems that the latest mods to source relates to wrong Adreno Blobs which may cause instability when used intensively like when playing heavy games.
So game may crash...
[THIS MAY BE FIXED SOON]
If you use this ROM, please report.
Regards.
Reserved
no rom.
serg4242 said:
no rom.
Click to expand...
Click to collapse
Hi,
Yeah... It seems I have forgotten to put a link to the build
Thanks for drawing my attention to this !!!
Link is now added into OP.
So I uploaded a new build with the Hardware key configuration now showing un in settings.
Still have to find out if that thing about "Adreno" (GPU) doing nasty things is still there
Regards.
Pupsic1990
Guys if anyone downloaded let me know how this rum works, I want stable firmware!
Gayrat1999 said:
Guys if anyone downloaded let me know how this rum works, I want stable firmware!
Click to expand...
Click to collapse
Hi,
As I said : Transformers Iron Forged isn't stable.
Seems related to bad Adreno blobs included in the last vendor files
Will try some other games and see if I get the same results...
And will try some other ROM's to check if it is ROM or sources related.
Will look if there is an update to that, but that is beyond my league
Regards.
Thank you very much for the work you have done.
Hi, better than RR ?
JesseWhiteMan said:
Hi, better than RR ?
Click to expand...
Click to collapse
Hi,
Both ROMs cannot be compared.
RR is loaded with almost EVERY FEATURE you can only dream of.
This one is really close to simple AOSP with some added features (like ability to customize Navigation buttons), but really little.
My hard drive died on me... so I can't really continue to build at the moment.
But if you want a Slim Based (Slim has always been my ALL TIME favourite with Tipsy-OS and Dirty Unicorns) ROM that is closer to RR, you should try Tipsy.
It also has loads of features, is really stable and is really under development...
Plus : I have direct access to dev of that ROM, so can get help to iron out bugs in case it's needed
I will of course build a new Tipsy-OS as soon as I get my hands on a spare hard drive
Regards.
Hey NexusPenguin,
I guess you are still stuck with the dead hard drive?
Cheers
support OTG USB storage device？