Im trying to do a CM-12.1 build on Ubuntu 15.04 / 3.16...41 kernel. Environment setup to use java 7 - all my other CM 11 builds compiled nicely.
Receiving this error on compile. got past manifest problems, but not sure why i'm getting this. any help appreciated.
Devs if this is in the wrong area -- my apologies. Please redirect as needed.
GNU Make 4.0
Built for x86_64-pc-linux-gnu
Copyright (C) 1988-2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Reading makefiles...
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=5.1.1
CM_VERSION=12.1-20150704-UNOFFICIAL-ms013g
TARGET_PRODUCT=cm_ms013g
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
TARGET_CPU_VARIANT=krait
TARGET_2ND_ARCH=
TARGET_2ND_ARCH_VARIANT=
TARGET_2ND_CPU_VARIANT=
HOST_ARCH=x86_64
HOST_OS=linux
HOST_OS_EXTRA=Linux-3.16.0-41-generic-x86_64-with-Ubuntu-15.04-vivid
HOST_BUILD_TYPE=release
BUILD_ID=LMY48B
OUT_DIR=/home/lou/cyanogen_rom_dev/cm-12.0/out
============================================
"ebtables is disabled on this build"
No private recovery resources for TARGET_DEVICE ms013g
Updating goal targets....
File 'droid' does not exist.
File 'droidcore' does not exist.
File 'checkapi-cm' does not exist.
File 'check-cm-public-api' does not exist.
Must remake target 'check-cm-public-api'.
Successfully remade target file 'check-cm-public-api'.
File 'check-cm-system-api' does not exist.
Must remake target 'check-cm-system-api'.
Successfully remade target file 'check-cm-system-api'.
Must remake target 'checkapi-cm'.
Successfully remade target file 'checkapi-cm'.
File '/home/lou/cyanogen_rom_dev/cm-12.0/out/target/common/obj/ETC/validate_framework_keymaps_intermediates/stamp' does not exist.
File '/home/lou/cyanogen_rom_dev/cm-12.0/out/host/linux-x86/bin/validatekeymaps' does not exist.
File '/home/lou/cyanogen_rom_dev/cm-12.0/out/host/linux-x86/obj32/EXECUTABLES/validatekeymaps_intermediates/validatekeymaps' does not exist.
File 'all_copied_headers' does not exist.
Must remake target 'all_copied_headers'.
Successfully remade target file 'all_copied_headers'.
Must remake target '/home/lou/cyanogen_rom_dev/cm-12.0/out/host/linux-x86/obj32/EXECUTABLES/validatekeymaps_intermediates/validatekeymaps'.
[33mhost Executable:[0m validatekeymaps (/home/lou/cyanogen_rom_dev/cm-12.0/out/host/linux-x86/obj32/EXECUTABLES/validatekeymaps_intermediates/validatekeymaps)
build/core/host_executable_internal.mk:31: recipe for target '/home/lou/cyanogen_rom_dev/cm-12.0/out/host/linux-x86/obj32/EXECUTABLES/validatekeymaps_intermediates/validatekeymaps' failed
#### make failed to build some targets (01:02 (mm:ss)) ####
Exact same problem
I'm having exactly this problem trying to build Lollipop BluezForAndroid for a nexus 7 wifi (flo) on an Ubuntu 12.04 system. Exact same error message, no idea why. Did you ever figure it out?
Related
My google skills are not strong enough to solve this problem, apparently.
Ultimately, I want to build a custom Clockwork recovery. I've been following guides here:
http://source.android.com/source/initializing.html
and here:
http://www.koushikdutta.com/2010/10/porting-clockwork-recovery-to-new.html
But I'm getting the following after typing "make -j4 otatools":
Code:
$ make -j4 otatools
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=2.3.7
TARGET_PRODUCT=full
TARGET_BUILD_VARIANT=eng
TARGET_SIMULATOR=
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a
HOST_ARCH=x86
HOST_OS=linux
HOST_BUILD_TYPE=release
BUILD_ID=GINGERBREAD
============================================
grep: build/target/board/generic/recovery.fstab: No such file or directory
find: `out/target/common/docs/gen': No such file or directory
find: `out/target/common/docs/gen': No such file or directory
find: `out/target/common/docs/gen': No such file or directory
find: `out/target/common/docs/gen': No such file or directory
find: `out/target/common/docs/gen': No such file or directory
host Executable: minigzip (out/host/linux-x86/obj/EXECUTABLES/minigzip_intermediates/minigzip)
host C++: libhost <= build/libs/host/pseudolocalize.cpp
host C: mkbootimg <= system/core/mkbootimg/mkbootimg.c
host Executable: mkbootfs (out/host/linux-x86/obj/EXECUTABLES/mkbootfs_intermediates/mkbootfs)
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.6.1/libstdc++.so when searching for -lstdc++
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.6.1/libstdc++.a when searching for -lstdc++
/usr/bin/ld: cannot find -lstdc++
collect2: ld returned 1 exit status
/make: *** [out/host/linux-x86/obj/EXECUTABLES/mkbootfs_intermediates/mkbootfs] Error 1
usr/bin/ldmake: *** Waiting for unfinished jobs....:
skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.6.1/libstdc++.so when searching for -lstdc++
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.6.1/libstdc++.a when searching for -lstdc++
/usr/bin/ld: cannot find -lstdc++
collect2: ld returned 1 exit status
make: *** [out/host/linux-x86/obj/EXECUTABLES/minigzip_intermediates/minigzip] Error 1
Can anyone help me get rid of the errors?
And also, what exactly does "make otatools" do?
Thanks in advance for any help/advice.
I was attempting to build PA, as per this thread, and I got as far as this step:
Code:
. build/envsetup.sh
lunch
I selected "pa_encore-userdebug", as suggested, and this occurred:
Code:
Which would you like? [full-eng] 44
Looking for dependencies
Dependencies file not found, bailing out.
No errors appeared prior to this, that I saw, but upon executing the "make bacon" stage, this happened:
Code:
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=4.0.4
TARGET_PRODUCT=pa_encore
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
HOST_ARCH=x86
HOST_OS=linux
HOST_BUILD_TYPE=release
BUILD_ID=IMM76L
============================================
Checking build tools versions...
************************************************************
You are attempting to build with an unsupported version
of java.
Your version is: java version "1.7.0_07".
The correct version is: Java SE 1.6.
Please follow the machine setup instructions at
http://source.android.com/source/download.html
************************************************************
************************************************************
You are attempting to build with the incorrect version
of javac.
Your version is: javac 1.7.0_07.
The correct version is: 1.6.
Please follow the machine setup instructions at
http://source.android.com/source/download.html
************************************************************
build/core/main.mk:147: *** stop. Stop.
I can't imagine that the entire process failed because it expected an older version of the JDK. Wha happen?
No, that is really what it is saying. Java7 was a big release, and i guess it is quite a lot to port to Dalvik. You could solve this in a number of ways, the easiest of which is just install Java 6. Those other warnings are not errors, your build should go fine if you pass the dependency checks.
Good luck, please report back if you have success.
Hi I try to compile slimrom (MM) but I have this error
[email protected]:~/android/f70n/roms/slimrom$ . build/envsetup.sh
including device/generic/mini-emulator-arm64/vendorsetup.sh
including device/generic/mini-emulator-armv7-a-neon/vendorsetup.sh
including device/generic/mini-emulator-mips/vendorsetup.sh
including device/generic/mini-emulator-x86_64/vendorsetup.sh
including device/generic/mini-emulator-x86/vendorsetup.sh
including device/lge/vee7/vendorsetup.sh
including vendor/slim/vendorsetup.sh
including sdk/bash_completion/adb.bash
[email protected]:~/android/f70n/roms/slimrom$ lunch slim_vee7-userdebug
Looking for dependencies
============================================
PLATFORM_VERSION_CODENAME=UNOFFICIAL
PLATFORM_VERSION=6.0
SLIM_VERSION=Slim-6.0.alpha.0.1-UNOFFICIAL-20160402-1948
TARGET_PRODUCT=slim_vee7
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
TARGET_CPU_VARIANT=cortex-a5
TARGET_2ND_ARCH=
TARGET_2ND_ARCH_VARIANT=
TARGET_2ND_CPU_VARIANT=
HOST_ARCH=x86_64
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.2.0-34-generic-x86_64-with-Ubuntu-15.10-wily
HOST_BUILD_TYPE=release
BUILD_ID=MRA59B
OUT_DIR=/home/vangreen/android/f70n/roms/slimrom/out
============================================
[email protected]:~/android/f70n/roms/slimrom$ make -j2 bacon
============================================
PLATFORM_VERSION_CODENAME=UNOFFICIAL
PLATFORM_VERSION=6.0
SLIM_VERSION=Slim-6.0.alpha.0.1-UNOFFICIAL-20160402-1949
TARGET_PRODUCT=slim_vee7
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
TARGET_CPU_VARIANT=cortex-a5
TARGET_2ND_ARCH=
TARGET_2ND_ARCH_VARIANT=
TARGET_2ND_CPU_VARIANT=
HOST_ARCH=x86_64
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.2.0-34-generic-x86_64-with-Ubuntu-15.10-wily
HOST_BUILD_TYPE=release
BUILD_ID=MRA59B
OUT_DIR=/home/vangreen/android/f70n/roms/slimrom/out
============================================
bionic/libc/arch-arm/arm.mk:55: *** "TARGET_CPU_VARIANT not set or set to an unknown value. Possible values are cortex-a7, cortex-a8, cortex-a9, cortex-a15, krait, denver. Use generic for devices that do not have a CPU similar to any of the supported cpu variants.". Stop.
#### make failed to build some targets (01:13 (mm:ss)) ####
[email protected]:~/android/f70n/roms/slimrom$ ^C
[email protected]:~/android/f70n/roms/slimrom$
That's a toughy
Sent from my iPhone using Tapatalk
I fix it. Slim source not suported cortex a5 architecture. I paste folder from omni source and everything works
TT || LG F70
Cd slim/device/lge/f70n/patches && sh apply.sh
I've got this when compiling Slim6 for Huawei Y300
============================================
system/bt/Android.mk:18: extraneous text after 'ifeq' directive
build/core/tasks/kernel.mk:150: **********************************************************
build/core/tasks/kernel.mk:151: * Kernel source found, but no configuration was defined *
build/core/tasks/kernel.mk:152: * Please add the TARGET_KERNEL_CONFIG variable to your *
build/core/tasks/kernel.mk:153: * BoardConfig.mk file *
build/core/tasks/kernel.mk:154: **********************************************************
Building with Jack: /home/android/android/y300/out/target/common/obj/JAVA_LIBRARIES/libprotobuf-java-nano_intermediates/classes.jack
Launching background server java -Dfile.encoding=UTF-8 -Xms2560m -XX:+TieredCompilation -jar /home/android/android/y300/out/host/linux-x86/framework/jack-launcher.jar -cp /home/android/android/y300/out/host/linux-x86/framework/jack.jar com.android.jack.server.JackSimpleServer
ERROR: /home/android/android/y300/external/protobuf/java/src/main/java/com/google/protobuf/nano/MessageNanoPrinter.java:1: The type java.lang.Object cannot be found in source files, imported jack libs or the classpath
ERROR: /home/android/android/y300/external/protobuf/java/src/main/java/com/google/protobuf/nano/MessageNanoPrinter.java:1: The type java.lang.Class cannot be found in source files, imported jack libs or the classpath
ERROR: /home/android/android/y300/external/protobuf/java/src/main/java/com/google/protobuf/nano/MessageNanoPrinter.java:33: The import java.lang cannot be resolved
ERROR: /home/android/android/y300/external/protobuf/java/src/main/java/com/google/protobuf/nano/MessageNanoPrinter.java:34: The import java.lang cannot be resolved
ERROR: /home/android/android/y300/external/protobuf/java/src/main/java/com/google/protobuf/nano/MessageNanoPrinter.java:35: The import java.lang cannot be resolved
ERROR: /home/android/android/y300/external/protobuf/java/src/main/java/com/google/protobuf/nano/MessageNanoPrinter.java:36: The import java.lang cannot be resolved
ERROR: /home/android/android/y300/external/protobuf/java/src/main/java/com/google/protobuf/nano/MessageNanoPrinter.java:37: The import java.lang cannot be resolved
. . .<3 pages of errors>
ERROR: /home/android/android/y300/external/protobuf/java/src/main/java/com/google/protobuf/nano/CodedOutputByteBufferNano.java:360: IllegalArgumentException cannot be resolved to a type
build/core/java.mk:636: recipe for target '/home/android/android/y300/out/target/common/obj/JAVA_LIBRARIES/libprotobuf-java-nano_intermediates/classes.jack' failed
make: *** [/home/android/android/y300/out/target/common/obj/JAVA_LIBRARIES/libprotobuf-java-nano_intermediates/classes.jack] Error 41
make: Leaving directory '/home/android/android/y300'
Click to expand...
Click to collapse
Hello all,
I'm getting started with Omnirom and wanted to compile a new device. After reading up on how this should be done, I tried a to set up a new device and compile but that resulted in errors. I figured it would be better to start out by trying to compile an existing device, however I get the same error message. Figuring this might be due to my set up, I ran the compilation in a clean docker instance with freshly installed openjdk-8-jdk and build tools, but same problem. I tried to find information about the error but there is not much to find online, so therefore I'm requesting your help.
The error I keep getting is:
Code:
Starting build with ninja
ninja: Entering directory `.'
ninja: error: '/home/floeperd/dev/doit2/out/host/common/obj/JAVA_LIBRARIES/platform-test-annotations-host_intermediates/javalib.jar', needed by '/home/floeperd/dev/doit2/out/host/common/obj/JAVA_LIBRARIES/compatibility-common-util-hostsidelib_intermediates/classes-full-debug.jar', missing and no known rule to make it
build/core/ninja.mk:157: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
Details about the steps and error are below:
Init and sync:
Code:
repo init -u git://github.com/omnirom/android.git -b android-7.1
repo sync
Add device in .repo/local_manifests:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project path="device/xiaomi/kenzo" name="android_device_xiaomi_kenzo" remote="omnirom" revision="android-7.1" />
</manifest>
Compile:
Code:
[email protected]:~/dev/doit2$ . build/envsetup.sh
including device/xiaomi/kenzo/vendorsetup.sh
including sdk/bash_completion/adb.bash
[email protected]:~/dev/doit2$ lunch
You're building on Linux
Lunch menu... pick a combo:
1. aosp_arm-eng
2. aosp_arm64-eng
3. aosp_mips-eng
4. aosp_mips64-eng
5. aosp_x86-eng
6. aosp_x86_64-eng
7. omni_kenzo-userdebug
Which would you like? [aosp_arm-eng] 7
Looking for dependencies on: device/xiaomi/msm8956-common
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
TARGET_PRODUCT=omni_kenzo
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=cortex-a53
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a53.a57
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.13.0-32-generic-x86_64-with-Ubuntu-17.10-artful
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=NJH47F
OUT_DIR=/home/floeperd/dev/doit2/out
============================================
but I always end up with this error:
Code:
Starting build with ninja
ninja: Entering directory `.'
ninja: error: '/home/floeperd/dev/doit2/out/host/common/obj/JAVA_LIBRARIES/platform-test-annotations-host_intermediates/javalib.jar', needed by '/home/floeperd/dev/doit2/out/host/common/obj/JAVA_LIBRARIES/compatibility-common-util-hostsidelib_intermediates/classes-full-debug.jar', missing and no known rule to make it
build/core/ninja.mk:157: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
I would appreciate any help. Thank you.
Hi
I have an issue when building AOSP, it fails to build some targets, as well as ninja fails with exit status 1. I have followed the guide provided by sony and i dont know why it happens. Log below.
Thanks
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=10
TARGET_PRODUCT=aosp_h3113
TARGET_BUILD_VARIANT=eng
TARGET_BUILD_TYPE=release
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=cortex-a53
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv8-a
TARGET_2ND_CPU_VARIANT=cortex-a53
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.15.0-62-generic-x86_64-Linux-Mint-19.2
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=QP1A.190711.019
OUT_DIR=out
PRODUCT_SOONG_NAMESPACES=device/sony/nile
============================================
hardware/qcom/gps/sdm845/etc/Android.mk was modified, regenerating...
[ 25% 113/441] including device/sony/common/Android.mk ...
IDisplayConfig version: DISPLAY_CONFIG_1_8
[ 99% 440/441] finishing build rules ...
platform_testing/build/tasks/tests/instrumentation_test_list.mk: warning: continuous_instrumentation_tests: Unknown installed file for module 'NexusLauncherOutOfProcTests'
platform_testing/build/tasks/tests/instrumentation_test_list.mk: warning: continuous_instrumentation_tests: Unknown installed file for module 'NexusLauncherDebug'
platform_testing/build/tasks/tests/instrumentation_test_list.mk: warning: continuous_instrumentation_tests: Unknown installed file for module 'NexusLauncherTests'
platform_testing/build/tasks/tests/platform_test_list.mk: warning: platform_tests: Unknown installed file for module 'LauncherRotationStressTest'
platform_testing/build/tasks/tests/platform_test_list.mk: warning: platform_tests: Unknown installed file for module 'PlatformScenarioTests'
FAILED: ninja: 'kernel/sony/msm-4.14/common-kernel/kernel-dtb-pioneer', needed by 'out/target/product/pioneer/kernel', missing and no known rule to make it
02:03:49 ninja failed with: exit status 1
#### failed to build some targets (02:22 (mm:ss)) ####
FAILED: ninja: 'kernel/sony/msm-4.14/common-kernel/kernel-dtb-pioneer
no prebuilt kernel in repo!
u need to compile kernel from source 1st or change "/device/sony/nile/platform.mk" to use source code for kernel, not prebuilt.
Now u can do it =) They updated sources & make prebuild kernels
https://github.com/sonyxperiadev/kernel-sony-msm-4.14-common