Hello XDA
How are you ?
I have a phone S5(SM-G900F).
What happened is that suddenly I started to get camera failed warning once i open the camera app ... And it force the camera app to shut... Even it happens when i try to use snapchat backcamera ( front one work fine ).
I searhed for a fix and i did everything ( FR, delete cache, chanhed app) nothing helped.. So i decided to check the firmware for the camera ... I found some are written as null for the rear camera i dont know why ??any one know of any way to solve this?
Thanks
Related
hi,
i installed some apps like bsbtweaks.. after a day i realised my cam app only work after first mins of reboot , if i run app and try to open cam it says like : failed to setup cam etc.
this is my first experience on hd2 and wm, what can i do to solve this problem ? thanks , btw i can edit registry or system files =)
offical and last firmware.
Disable all extra modes and resolutions for camera in BSB. Those extra modes needs more RAM, which is usually only available after start, and/or when no other application is running (Opera 10 is known to eat almost all RAM for example).
thank you , i have already disabled them but it was still not working , then i found a registry entry that says " deactivate" in cam settings and set it to 0 , cam is working for now in full ram , but i am still test-ng if it is going to be ok.
If push comes to shove, a hard reset usually fixes most issues !
I am getting errors again ... any ideas ? not hard reset please =)
I am on CM11 custom rom now but having problem with camera . the original camera app won't work and the force close apears . i also installed other camera apps . I can take pictures but when switching to video an error message appeared that " "insert an sd card before using camera" ! how can I fix this ?!
Download CM Camers fix from the play store..and
Download this with it..
https://www.dropbox.com/s/xha0lztrny7923s/Restart_Camera.apk?dl=0
"If someone helps, never forget to hit thanks ? "
Hello,
Since many days, i have the message "Camera failed" (echec appareil photo in french) when i open the camera app on my mobile Samsung Galaxy S3 Neo (GT-I9301I).
When i press "OK", the app closes.
Android version : 4.4.2
Current Build number version : KOT49H.I9301IXDUAOF2
I did many tests to solve the problem : install others camera app, factory data reset, install other official french roms or last other country roms from sammobile.com,... but each of them without success.
My mobile is under warranty but the Support Center Samsung near home doesn't want take in charge because my mobile has the micro usb connector broken (the electric charging works but usb connection to pc doesn't works). In detail, they can send it but first I will received a paying quotation (60€ approximately) for the unit broken (micro-usb).
On the other hand, i saw a solution on xda-developers.com was to flash the rom by Odin, but i cannot use this because my micro usb is broken and it is not recognized by any PC. The roms in the early tests was installed after having added them on my sd card inserted in my phone.
To finish, when i install a last camera app from Google play, i noticed that the camera in front works but not the camera in back.
Considering all these items, Does anyone has a solution to solve my camera problem on the Galaxy S3 Neo and more generally on my android ? Do you think my camera at the back should be changed? Sorry for my english. Thanks in advance.
Didier
Juste check this thread https://www.google.com/url?sa=t&sou...QcHCoQ&usg=AFQjCNGVctHwF6ct2wkMZS7EktkBFhCHFw
step 1 : download indian verion eui 5.8.016s version ... (no root required ) ..
step 2: install it
step 3: use ur main gmail after installing in mobile ..
step 4: open finger print app and click ok option for photos to capture ..
step 5: open camera app .. and try to take pics with fingerprint ...(if it captures ...close the application and try to open again finger print app ..try to add finger print if it add u r lucky )or else try next step ....
step 6: if pics not capture in camera app ... close the application and try to add fingerprint in finger print app.. if not succeedd ... don't worry ...
step7 : calibarte the fingerprint (note : don't try to add fingerprint now ) close the app ... and go for factory reset ...
step 8: after factory reset ... check the same finger print process again as given above methods .. now go to recovery clean all data ,wipe ,cache ... after that come back and check again fingerprint ...
step 9: if it works leave here and started working or else if not works install indian eui 5.8.019s rom and install it .... after installing .. use same methods as given (note: only use gmail which u given as above rom ) ..
this will 100% work ... carefully do every step ... it works i am sure ... i solved this problem in letv le max 2 and letv 2 and lemax 2 x829 ...
it working 100000% !
You post the solution and then you comment "it woking %10000" makes me think if really is working .
FeHo said:
You post the solution and then you comment "it woking %10000" makes me think if really is working .
Click to expand...
Click to collapse
i says it working 10000% because it work and i have not edited the first post !
your comment is..... stupid
it really working !!!! why i posting a solution ,
tested and approuved by me and many user
For me It doesn't work. I did all the steps in several different combinations. With India 16s, India 19s roms. My fingerprint sensor probably is dead because of hardware problem. It has always been problematic. Only thing I havent tested lately is India 15s rom or something like that rom. I remember it used to resurrect fingerprint sensor for me some half a year ago.
If your fingerprint take photo this method is good
I can't create the leeco account. I have the rom installed, but it keeps throwing server error in my face...
Skip leeco account
For me the solution to get fingerprint working is very simple but first do not touch the fingerprint calibration ever because it ruins every thing ( sorry for my english )
1 : your phone must be on stock rom
2: reboot your phone
3: go to app management ---> com.qualcomm.qt.biometrics.fingerprint.service and do clear data and cash and force stop
4: restart the phone
5: go again to app management ---> com.qualcomm.qt.biometrics.fingerprint.service and just do clear data and cash
6: wait 5 minutes so the phone can cool down, the temperature must be under 30 c .
7: try to add fingerprint and you'll be surprised
miracle908 said:
For me the solution to get fingerprint working is very simple but first do not touch the fingerprint calibration ever because it ruins every thing ( sorry for my english )
1 : your phone must be on stock rom
2: reboot your phone
3: go to app management ---> com.qualcomm.qt.biometrics.fingerprint.service and do clear data and cash and force stop
4: restart the phone
5: go again to app management ---> com.qualcomm.qt.biometrics.fingerprint.service and just do clear data and cash
6: wait 5 minutes so the phone can cool down, the temperature must be under 30 c .
7: try to add fingerprint and you'll be surprised
Click to expand...
Click to collapse
I'll try it
miracle908 said:
For me the solution to get fingerprint working is very simple but first do not touch the fingerprint calibration ever because it ruins every thing ( sorry for my english )
1 : your phone must be on stock rom
2: reboot your phone
3: go to app management ---> com.qualcomm.qt.biometrics.fingerprint.service and do clear data and cash and force stop
4: restart the phone
5: go again to app management ---> com.qualcomm.qt.biometrics.fingerprint.service and just do clear data and cash
6: wait 5 minutes so the phone can cool down, the temperature must be under 30 c .
7: try to add fingerprint and you'll be surprised
Click to expand...
Click to collapse
which stock Rom?
I'm using Crisbal CBG_28-V12a
AhmadSant said:
which stock Rom?
I'm using Crisbal CBG_28-V12a
Click to expand...
Click to collapse
I'm using the chinese rom 23s
I have 016S can it work?
didn't work...
Hello
i have a big problem with any camera on lineage 18 ( always newest version ). After run any camera dont work after 5 - 20 seconds. Dont show any crash, just disapper. I tryb reinstall system, install a lot od version gcam. Search aome modules on magisk but nothing work.
When i open camera i can make fast some photos, then camera disapper.
Can someone help ?
Thansk