Related
So I'm new to the android world and today I stupidly decided to root my phone. I used Odin3 and I think put in the Tmobile version into the AP place. After that, I realized my phone was unlocked and Odin failed to root my phone. Now I'm stuck at the message "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I read other posts about this problem but there are none for the note 3. Can someone help me and link me files to get out of that screen? I have no idea if its because I have an unlocked phone. Thanks for everyones help. I tried sammobile but I cannot locate my product code. Like I have no idea where my phone is made from because it's unlocked. PLLEASSSE HELP ME!!!! :crying:
Please? just a comment on what to do could help!!! Thanks
vincentding said:
Please? just a comment on what to do could help!!! Thanks
Click to expand...
Click to collapse
Install Kies (v3). Go in Kies to recovery mode. Post more details after that if you want more answers.
The much better alternative would have been if you knew your original firmware - that way you could have downloaded it from a place like
http://samsung-updates.com/device/?id=SM-N9005
and try to write it in Odin.
So i found out my firmware is N900XXUCMK2 but I dont know what country its from! help!
vincentding said:
So i found out my firmware is N900XXUCMK2 but I dont know what country its from! help!
Click to expand...
Click to collapse
I also faced this issue. Don't be too worried.
Just download the latest firmware for your country and flash it from ODIN.
Or you can follow this link
http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
and use Kies to get out of the mess.
Hi !
Pls help with S3 neo 4.4.4.
I try few roms from Samsung but no success
first time I download with OTA update but when phone is get update ... I get odin screen with DOWNLOADING... with the message " could not do normal boot"
then I put back 4.3 with odin official update and the pone is working...
then I try few roms 4.4.4. official (India Kazakhstan Hon Kong) but no success always the same (odin) screen after update.
What I do wrong ?
now running 4.3 :crying:
GT-I9300I
s3ve3gub
I9300IUBUAND1
MSM8228
I have the same problem
I have the same problem. my phone is identical to yours April 2014 I9300IUBUAND1 I9300IUUBAND1 I9300IUBUAND1 4.3 Product Code: TTT--- I hope someone has a solution for our problem
Pls need solution or tip how to update my GT-I9300I Neo+ to Kitkat 4.4.4 ......
Here is my problem...I rooted my s3 neo gti9300i using towelroot and it worked ...I also didn't flash any custom recovery.. I bought my phone in june...its my first android phone...but nw I can't update as my device status is "MODIFIED"...I installed xposed and changed my device status to "OFFICIAL" using wanam xposed...I got the latest update 4.4.4...I downloaded but when it booted its self and started installing an "ERROR"...so I removed xposed and unrooted my phone using supersu...then again tryied nw ..not possible to get update server say that my system is modified...what to do nw...pls help...its my 1st phone..?
I believe it is in need of repartition. Some partition from the Rom you're trying to install exceeds current partition size.
So either find the correct update for your region (which I strongly advise) Either try it by ticking repartition( do it your own risk) which is not advisable as you might end up bricking the phone.
You need a pit file for repartition.
mariosraptor said:
I believe it is in need of repartition. Some partition from the Rom you're trying to install exceeds current partition size.
So either find the correct update for your region (which I strongly advise) Either try it by ticking repartition( do it your own risk) which is not advisable as you might end up bricking the phone.
You need a pit file for repartition.
Click to expand...
Click to collapse
whether they can pit file for Europe and rom for Kazakhstan because I found the pit to Europe. my phone is I9300IUBUAND1 I9300IUUBAND1 I9300IUBUAND1 4.3 Product Code: TTT Trinidad and Tobago.
Any solution for mine...
My phone is also S3 Neo + but is plus version with 1.4 CPU ... it is the first version for china jan 2014 .... all updates 4.3 is OK for him from Samsung firmwares .... but i cant update for 4.4 .... i always after any update get the android screen and after that Odin screen with downloading and message with cant do normal boot .... and cant go to recovery only flash back with 4.3....
Its my phone soft bricked ? I try also wit pit file and firmware flash but nothing.... the same situation ....
Pls help
nattila said:
My phone is also S3 Neo + but is plus version with 1.4 CPU ... it is the first version for china jan 2014 .... all updates 4.3 is OK for him from Samsung firmwares .... but i cant update for 4.4 .... i always after any update get the android screen and after that Odin screen with downloading and message with cant do normal boot .... and cant go to recovery only flash back with 4.3....
Its my phone soft bricked ? I try also wit pit file and firmware flash but nothing.... the same situation ....
Pls help
Click to expand...
Click to collapse
The best solution for you is to initialize your phone using Kies 3... However, this requires a running phone, not a bootlooping one... Use a firmware that works with you first!
Install it, connect your phone and do the initialization from the firmware menu... This should install the latest available firmware to your device while cleaning up the whole mess....
Good luck
moro89 said:
The best solution for you is to initialize your phone using Kies 3... However, this requires a running phone, not a bootlooping one... Use a firmware that works with you first!
Install it, connect your phone and do the initialization from the firmware menu... This should install the latest available firmware to your device while cleaning up the whole mess....
Good luck
Click to expand...
Click to collapse
The fanny thing is that .... I do have a functional phone with official Samsung firmware but its 4.3 .... I flashed almost every 4.3 on him all is working .... also try to root ..... flash recovery .... its all OK on 4.3
But when I come to 4.4.4 official firmware .... its refuse to boot ....
I try OTA update .... try KIES ... ODIN .....
always the same scenario .... after flash phone restarted ... I get the first screen with Samsung logo ... after its boot to odin with red message cant do normal boot... and don't let me to recovery (volume up+home) only to download (volume down+home)
Its weird
nattila said:
The fanny thing is that .... I do have a functional phone with official Samsung firmware but its 4.3 .... I flashed almost every 4.3 on him all is working .... also try to root ..... flash recovery .... its all OK on 4.3
But when I come to 4.4.4 official firmware .... its refuse to boot ....
I try OTA update .... try KIES ... ODIN .....
always the same scenario .... after flash phone restarted ... I get the first screen with Samsung logo ... after its boot to odin with red message cant do normal boot... and don't let me to recovery (volume up+home) only to download (volume down+home)
Its weird
Click to expand...
Click to collapse
Send it to Samsung... They definitely know how to put Kitkat on your device!
Are u sure you are downloading right firmware for your device since there are few variants around here, and mayb kitkat is not released for your variant ...
As i can see on samsung update page there is only one 4.4.4 for your device variant (s3ve3gUB)
http://samsung-updates.com/device/?id=GT-I9300I
It is : I9300IUBUBNJ1 ,so try flashing that one
Rox said:
Are u sure you are downloading right firmware for your device since there are few variants around here, and mayb kitkat is not released for your variant ...
As i can see on samsung update page there is only one 4.4.4 for your device variant (s3ve3gUB)
http://samsung-updates.com/device/?id=GT-I9300I
It is : I9300IUBUBNJ1 ,so try flashing that one
Click to expand...
Click to collapse
Do you mean.... this one???
http://www.sammobile.com/firmwares/download/37860/I9300IUBUBNJ1_I9300IUUBBNJ1_TTT.zip/
I try few times to flash I9300IUBUBNJ1 thru Odin .... OTA ... KIES .... no success ..... I have a weird phone ....
thanks for a tips
And yes ,,,,,,,my phone is UB variant .... maybe Samsung is not released firmware for my phone .....
I just look under hub
MODEL: GT-I9300I UD
SSN: I9300IGSMH
FCC: A3LGTI9300I
Still no luck with update to 4.4 ... ......
moro89 said:
The best solution for you is to initialize your phone using Kies 3... However, this requires a running phone, not a bootlooping one... Use a firmware that works with you first!
Install it, connect your phone and do the initialization from the firmware menu... This should install the latest available firmware to your device while cleaning up the whole mess....
Good luck
Click to expand...
Click to collapse
i cant install a firmware because , look at the photo , i tried 3 different Firmwares help !!!!!
nattila said:
I just look under hub
MODEL: GT-I9300I UD
SSN: I9300IGSMH
FCC: A3LGTI9300I
Click to expand...
Click to collapse
I am working on the same exact phone and I have having a hard time finding the right firmware for this phone.
It is stuck on recovery. I get a could not do normal boot and back to recovery. So I was planning on flashing a stock rom to get it out of recovery. Every how to page talks about going into setting to find your firmware version. This makes it hard when you cannot get into phone settings.
If you ever find the right Rom for this type of phone Please reply. Every rom site I have visited does not have the correct one.
This is most probably a hardware issue. Something on the main board got fried or some other glitch took place in a hardware component. Send it to Samsung for a repair or better buy a new phone.
---------- Post added at 12:25 PM ---------- Previous post was at 12:23 PM ----------
Another idea is to use Smart Switch. You don't need a running phone this time. Just choose the firmware initialization option and enter your device model and serial number, and you're good to go. If this didn't work, send it to Samsung or give it a goodbye kiss.
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
Is your phone still working? Which firmware is actually installed? Which firmware you want to flash?
regards
LS.xD said:
Is your phone still working? Which firmware is actually installed? Which firmware you want to flash?
regards
Click to expand...
Click to collapse
I buy my grand prime last year.. dec.. there are some updates from sammobile for my grand prime i downloaded.. i have flashed it but failed.. i tried it many times but. Still the same. I downloaded the correct firmware and region.. and also in the ota it also says the latest updates have been installed.. but there are already two updates of it..can you help me for this sir?.
daganteng15 said:
I buy my grand prime last year.. dec.. there are some updates from sammobile for my grand prime i downloaded.. i have flashed it but failed.. i tried it many times but. Still the same. I downloaded the correct firmware and region.. and also in the ota it also says the latest updates have been installed.. but there are already two updates of it..can you help me for this sir?.
Click to expand...
Click to collapse
Please tell me which firmware version is actually installed and which version you want to flash? Which region is your phone?
@LS.xD
i have the same problem with daganteng15, my current firmware installed on my galaxy grand prime is with CSC G530HOLB1ANL1 (XTC openline for Philippines) and now there is two new update in sammobile which is with CSC G530HOLB1ANL3 and the latest CSC G530HOLBAOA2 i tried to flash this two new firmware via ODIN 3.09 but both failed, in ODIN it always say "Fail Auth"
i am sure that i downloaded the correct firmarwe for our region. can you help us Please...
Thanks in advance.
3xhon said:
@LS.xD
i have the same problem with daganteng15, my current firmware installed on my galaxy grand prime is with CSC G530HOLB1ANL1 (XTC openline for Philippines) and now there is two new update in sammobile which is with CSC G530HOLB1ANL3 and the latest CSC G530HOLBAOA2 i tried to flash this two new firmware via ODIN 3.09 but both failed, in ODIN it always say "Fail Auth"
i am sure that i downloaded the correct firmarwe for our region. can you help us Please...
Thanks in advance.
Click to expand...
Click to collapse
Yah.. were the same.. there are two new update on grand prime XTC Philippines (open line) but cant flash in odin. And also can not update the device in OTA. Please help.
This device have secure bootloader, so might be the reason u cant flash updated firmware, only OTA update. IMO need to unlock bootloader first if wanna success flash through odin.
Until now, the way to unlock this device bootloader is unavailable.
Shinkumara said:
This device have secure bootloader, so might be the reason u cant flash updated firmware, only OTA update. IMO need to unlock bootloader first if wanna success flash through odin.
Until now, the way to unlock this device bootloader is unavailable.
Click to expand...
Click to collapse
To upgrade the device is not necesarry to download the firmware of the respective region, u can flash any version of firmware for another regions, the only need to know is the respective version of firmware is for your device only that, i have flashed many firmware in my prime without issues ever from other regions ( most actual than my original region ) and y device is working ike a charm
Have you rooted the phone?
Can u elaborate what means.of.respective version please? u said that u flash many firmware for ur prime, which.one firmware have u been flashed successfully @tutibreaker
Hello guys I have solve this issue by flashing different firmware I used Nepal firmware. XTC firmware is corrupted.
You can use different region firmware if your phone is openline.
You can read my posts here
http://forum.xda-developers.com/gra...ully-rooted-galaxy-grand-prime-t2935607/page8
Shinkumara said:
Can u elaborate what means.of.respective version please? u said that u flash many firmware for ur prime, which.one firmware have u been flashed successfully @tutibreaker
Click to expand...
Click to collapse
no i dont flash many versions in my device, just flash the latest update from other region and works fine, the region is not important
Hey, same problem here. I can't flash any firmware. Odin just errors: Failed [Auth].
And since I've rooted my Grand Prime, I'm not able to update it via OTA
What am I supposed to do?!
Recently I've faced some lags on my phone that I don't know why, but I think I need to update my firmware.
Apocalypse Now said:
Hey, same problem here. I can't flash any firmware. Odin just errors: Failed [Auth].
And since I've rooted my Grand Prime, I'm not able to update it via OTA
What am I supposed to do?!
Recently I've faced some lags on my phone that I don't know why, but I think I need to update my firmware.
Click to expand...
Click to collapse
What firmware did you flash? If its XTC then you should try other region firmware like Malaysia or Indonesia. XTC firmware is corrupted.
vancer32 said:
What firmware did you flash? If its XTC then you should try other region firmware like Malaysia or Indonesia. XTC firmware is corrupted.
Click to expand...
Click to collapse
Solved it. Thanks. I should have flashed a newer version of firmware; I flashed Kazakhstan and it went OK.
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
You have to flash exact soft for your region and phone. Grand Prime have many versions so you must select right one. In East Europe there is no secure bootloader or maybe I haven't encountered it yet. If you have secured bootloader so probably it's gonna be same like Sony or HTC. You'll have to unlock it. I can't say where
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
Just open your odin then firstly do not connect your device before . Add the files to AP first and then you can connect your device into odin or that firmware you've download did not match .
And did you solve that problem guys?
awha said:
Just open your odin then firstly do not connect your device before . Add the files to AP first and then you can connect your device into odin or that firmware you've download did not match .
Click to expand...
Click to collapse
The order did not do any difference. Why should it do?!
Before a chance the rom, I rooted my cellphone by this way
[ androidxda. com/root-samsung-galaxy-grand-prime-sm-g530h ]
It worked!
As someone said here, I should need to unlock the bootloader, I looked for I solution and I find this one
[ techtudo. com.br/dicas-e-tutoriais/noticia/2014/07/como-destravar-o-bootloader-de-um-dispositivo-android.html ]
this site is in portuguese-Br
it did not work
so, I installed samsung kies, and odin 3.04. And also didn't worked.
Now, I installed CMW recovery
[ mediafire .com/download/w0gzfrq7xtvztdr/Galaxy+Grand+Prime+CWM+Recovery.zip ]
still the same
finally, I downloaded odin 3.10.6, and instal a rom from india. As I find here [ droidviews .com/install-android-5-0-2-lollipop-firmware-on-galaxy-grand-prime-sm-g530h/ ]
Before I was trying Russia's rom.
After all, I noticed, and I read here, that depends on firmware which I was intalling
I installed the test android lollipop on my s4 i9500, now i want to downgrade but i dont know how. i tried to install kitkat but its failing. its even not opening because of " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again " I cannot reinstall the china android L because the link expired what should i do ?
LeartK said:
I installed the test android lollipop on my s4 i9500, now i want to downgrade but i dont know how. i tried to install kitkat but its failing. its even not opening because of " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again " I cannot reinstall the china android L because the link expired what should i do ?
Click to expand...
Click to collapse
Flash other android L for i9500 via ODIN -> India or Russia -> HERE.
I just tried it. It says fail. on odin. Anyone help ?
LeartK said:
I just tried it. It says fail. on odin. Anyone help ?
Click to expand...
Click to collapse
We are helping you. Add some screenshots for see the error of ODIN when you try to flash the firmware.
LeartK said:
I just tried it. It says fail. on odin. Anyone help ?
Click to expand...
Click to collapse
you sure you have your Drivers installed correctly?
Hello 2 all !
i use the stock roms for my S4 ,most offen i use kitkat 4.4.2 versions.Today i reflash my phone and i get this stupid msg on notification : '
""Security notice' stating - 'your device's security has blocked an action that is not permitted. No further action is required'"" .. and this one is blocking the wifi to off, and i cant get it to ON the button rest grey after rom booted. .
I reflash many time with diffrent roms versions (only kk 4 4 2 from sammobile) the probl is the same on every rom i flash !!
I think is releate with KNOX crap but im not sure ,The only way to have wifi on kitkat again is to flash another kernel after i flash the stock rom !!! I really need help with that because i need some stock version for daily use.
I try kies ....same results.... i try odin..same results ...wifi dont start ! I delete wpa_supplicant from data/misc/wifi ..nothing.... no wifi ! Most of all when i open kies to reflash new firmware it say kies NO SUPPORT for youre model any more !! whtf???? i use to reflash with kies many time for fix trubles,and now...no suppot this model ??
I so many users with this problem but NO FIX for it !
Pls... if anyone can fix this or post an solution, i really apreciate for it .
My phone is S4 GT-I9515 and i use the stock rom 4.4.2 - I9515XXU1AND3_I9515YJV1ANE1_XSG
Pls .....any help ??
Here's the stock i9515 firmware: http://www.sammobile.com/firmwares/database/GT-I9515/
Maybe try a stock 5.01 firmware?
audit13 said:
Here's the stock i9515 firmware: http://www.sammobile.com/firmwares/database/GT-I9515/
Maybe try a stock 5.01 firmware?
Click to expand...
Click to collapse
You miss my point ..is stock firmware kitkat who has this problem, i flash 4.4.2.KK .....5.01 LP ,all stock roms!,the wifi is still stuck on grey button and when i try to activate it come up that notification pop with : Your phones security has blocked an action that is not permitted. No further action is required.! ...
jean_pulbere said:
Hello 2 all !
i use the stock roms for my S4 ,most offen i use kitkat 4.4.2 versions.Today i reflash my phone and i get this stupid msg on notification : '
""Security notice' stating - 'your device's security has blocked an action that is not permitted. No further action is required'"" .. and this one is blocking the wifi to off, and i cant get it to ON the button rest grey after rom booted. .
I reflash many time with diffrent roms versions (only kk 4 4 2 from sammobile) the probl is the same on every rom i flash !!
I think is releate with KNOX crap but im not sure ,The only way to have wifi on kitkat again is to flash another kernel after i flash the stock rom !!! I really need help with that because i need some stock version for daily use.
I try kies ....same results.... i try odin..same results ...wifi dont start ! I delete wpa_supplicant from data/misc/wifi ..nothing.... no wifi ! Most of all when i open kies to reflash new firmware it say kies NO SUPPORT for youre model any more !! whtf???? i use to reflash with kies many time for fix trubles,and now...no suppot this model ??
I so many users with this problem but NO FIX for it !
Pls... if anyone can fix this or post an solution, i really apreciate for it .
My phone is S4 GT-I9515 and i use the stock rom 4.4.2 - I9515XXU1AND3_I9515YJV1ANE1_XSG
Pls .....any help ??
Click to expand...
Click to collapse
jean_pulbere said:
You miss my point ..is stock firmware kitkat who has this problem, i flash 4.4.2.KK .....5.01 LP ,all stock roms!,the wifi is still stuck on grey button and when i try to activate it come up that notification pop with : Your phones security has blocked an action that is not permitted. No further action is required.! ...
Click to expand...
Click to collapse
I do not think I missed the point. Your original post only mentions KK but not LP which is why I suggested LP. The last line of your original post even states the ROM in use on the phone.
audit13 said:
I do not think I missed the point. Your original post only mentions KK but not LP which is why I suggested LP. The last line of your original post even states the ROM in use on the phone.
Click to expand...
Click to collapse
Ok ,my engl is not so good so maibe i im not make my self clear .. I use the rom posted in the last line ,for daily use till now... today i wanted to relflash the same rom and surpeise ,it comme up with that problem . I reflash many time bot not working again...so i decide to reflash diffrent version of stocks rom....Kitkat and Lolipop... and with no succes because that erorre is still present and wifi is still stuck on any rom i flash! I
No worries. Thank you for clarifying the situation. Your English is fine.
I don't know which version of Odin you are using but I always use Odin 3.07 because I have never had a problem with 3.07.
Do you have a pit file for your phone? Flashing the pit file with the stock ROM in Odin might solve the problem.
jean_pulbere said:
Ok ,my engl is not so good so maibe i im not make my self clear .. I use the rom posted in the last line ,for daily use till now... today i wanted to relflash the same rom and surpeise ,it comme up with that problem . I reflash many time bot not working again...so i decide to reflash diffrent version of stocks rom....Kitkat and Lolipop... and with no succes because that erorre is still present and wifi is still stuck on any rom i flash! I
Click to expand...
Click to collapse
This is coz KNOX blocked the wifi access.
SOLUTION:
1. Flash via ODIN the latest android 4.4.2 version to your device: THIS ONE.
2. Root it via ODIN with CF-Autoroot.
3. Using Root Explorer (for example) delete all the KNOX entries: GUIDE.
4. Reboot your device. You should have wifi now. Install TRIANGLE AWAY and reset your flash counter to complete the job. Done.
Joku1981 said:
This is coz KNOX blocked the wifi access.
SOLUTION:
1. Flash via ODIN the latest android 4.4.2 version to your device: THIS ONE.
2. Root it via ODIN with CF-Autoroot.
3. Using Root Explorer (for example) delete all the KNOX entries: GUIDE.
4. Reboot your device. You should have wifi now. Install TRIANGLE AWAY and reset your flash counter to complete the job. Done.
Click to expand...
Click to collapse
I really apreciate your help,lets try to see what happen" )) In this moment the only way to use wifi is because i flash other kernel (Googy_max3 patched for my phone model) so...let"s try and i ll commeback with news,thx very much again!
Joku1981 said:
This is coz KNOX blocked the wifi access.
SOLUTION:
1. Flash via ODIN the latest android 4.4.2 version to your device: THIS ONE.
2. Root it via ODIN with CF-Autoroot.
3. Using Root Explorer (for example) delete all the KNOX entries: GUIDE.
4. Reboot your device. You should have wifi now. Install TRIANGLE AWAY and reset your flash counter to complete the job. Done.
Click to expand...
Click to collapse
And the answer is ......... NO ((( Same problem same notification NO WIFI ,the button is still grey (( it s start to make it me crazy this crap ..grrrr... is there any way to get ONLY the kernel ,stock kernel for my firmware ??? maibe if i flash separate will fix it ...i was think about that because if if flash the googy_max3 patched it works ...so may be an kernel probl ??? ((
jean_pulbere said:
And the answer is ......... NO ((( Same problem same notification NO WIFI ,the button is still grey (( it s start to make it me crazy this crap ..grrrr... is there any way to get ONLY the kernel ,stock kernel for my firmware ??? maibe if i flash separate will fix it ...i was think about that because if if flash the googy_max3 patched it works ...so may be an kernel probl ??? ((
Click to expand...
Click to collapse
Install this APP and add screenshots pls.
You mentioned that you tried kies in your post but Kies didn't support your phone. It could be that the updated ROM is supported in Samsung's smart switch.
http://www.samsung.com/us/smart-switch/
audit13 said:
No worries. Thank you for clarifying the situation. Your English is fine.
I don't know which version of Odin you are using but I always use Odin 3.07 because I have never had a problem with 3.07.
Do you have a pit file for your phone? Flashing the pit file with the stock ROM in Odin might solve the problem.
Click to expand...
Click to collapse
i try flashing with all odin version included 3.07 but is not odin probl...is something in my phone that bloked wifi in kernel or something..knox..security polices i dont have any clue how to fix it...i flash phone from years..many models..but never happen like this...i dont hv any explication. kies not support my phone model but till now it was supported.. i try it with the other soft recomandate from kies and surprise..not support for my model !! im really f..k up...pfff... what du you say about pit file??? i dont hv that file..where to search and how to use??
Joku1981 said:
Install this APP and add screenshots pls.
Click to expand...
Click to collapse
i know the apk for phone info...what do you want to see ?? i make the screenshot at ..what??
audit13 said:
You mentioned that you tried kies in your post but Kies didn't support your phone. It could be that the updated ROM is supported in Samsung's smart switch.
http://www.samsung.com/us/smart-switch/
Click to expand...
Click to collapse
i told you ..till now i repair my stock with kies or smart swich...many time i do that.so ..today when i instaled kies and open..surpriseeee..my model not suported!! i install smart swich..open...surpriseee..your device not supported!!..whtf !??
incredibile...i extracted modem.bin and wifi modem from stock firmware..flashed ...no success again....im in a point break...no clue what to do. i bet is something related to security ..but not sure..because of notificatiin mesage...security block bla bla...... triangleaway was reseting my flash counter knox disable delete..rooted...all works but not the damn wifi...samsung i hate you!! (
jean_pulbere said:
incredibile...i extracted modem.bin and wifi modem from stock firmware..flashed ...no success again....im in a point break...no clue what to do. i bet is something related to security ..but not sure..because of notificatiin mesage...security block bla bla...... triangleaway was reseting my flash counter knox disable delete..rooted...all works but not the damn wifi...samsung i hate you!! (
Click to expand...
Click to collapse
Try a custom rom.
Lennyz1988 said:
Try a custom rom.
Click to expand...
Click to collapse
Finnaly the probl is fixed !!!!! pffffff... i flash with odin 10.7 the lolipop stock rom 5.0 ,after full instal, go to recovery stock and wipe factory reset wipe chache ,reboot download mode and flash again 4.4.2 kit kat,roted instal twrp and ..gere you go all function back to normal ! ))) pfffhiuuu ... thx for helping me guys ! Btw ...i still search for stock 4.4.2 kernel ... pls post link if you know !