There have been many 5.1 full firmwares uploaded for XT1095, XT1096, XT1097, and XT1092:
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25
Sent from my XT1095 using Tapatalk
I have uploaded the XT1095 5.1 to my drive. The download should be much faster.
https://drive.google.com/file/d/0B1jFVjp5LrZrbjdxQWVYWjVRakk/edit?usp=docslist_api
Sent from my XT1095 using Tapatalk
Wow, thanks!
Hey! Here is the one for XT1092 RETEU . You may add it to OP.
https://drive.google.com/file/d/0B-hH_8StWH5-VzMwRXdLZ0tTRWM/view?usp=sharing
I'll leave this here :
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img_sparsechunk.0
$ fastboot flash system system.img_sparsechunk.1
$ fastboot flash system system.img_sparsechunk.2
$ fastboot flash system system.img_sparsechunk.3
$ fastboot flash system system.img_sparsechunk.4
$ fastboot flash system system.img_sparsechunk.5
$ fastboot flash system system.img_sparsechunk.6
$ fastboot flash system system.img_sparsechunk.7
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot erase userdata (not mandatory)
$ fastboot erase cache (not mandatory)
$ fastboot reboot
Nicolae-Daniel said:
I'll live this here :
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
Click to expand...
Click to collapse
How about those two, what happen if I don't flash them?
Some say there's a brick risk with those.
It's only a risk if you are downgrading. If you are upgrading or flashing the same version, there is no risk.
Sent from my XT1095 using Tapatalk
AGISCI said:
It's only a risk if you are downgrading. If you are upgrading or flashing the same version, there is no risk.
Click to expand...
Click to collapse
Unless you're on Verizon's xt1096. The suspicion is that flashing those may preclude you from being able to use MoFo to flash a pre-rooted ROM. We have no other way to root, so I know people are planning to flash this file without gpt and motoboot included as a test. Here's hoping!
I'm uploading the Vzw file right now to share, since it took about 6 hours to download from that filefactory host.
trimax84 said:
Unless you're on Verizon's xt1096. The suspicion is that flashing those may preclude you from being able to use MoFo to flash a pre-rooted ROM. We have no other way to root, so I know people are planning to flash this file without gpt and motoboot included as a test. Here's hoping!
I'm uploading the Vzw file right now to share, since it took about 6 hours to download from that filefactory host.
Click to expand...
Click to collapse
... Unrelated to what I said. We are talking about risking bricks, not about mofo.
Sent from my XT1095 using Tapatalk
Verizon 5.1 file: https://mega.co.nz/#!HtVThLzT
I see people saying no root on 5.1. I'm running 5.1 fully rooted. What am I missing
FunkyMcBain said:
I see people saying no root on 5.1. I'm running 5.1 fully rooted. What am I missing
Click to expand...
Click to collapse
No root on 5.1 VERIZON. There is root for xt1095, xt1092, xt1097, and maybe others.
Sent from my XT1095 using Tapatalk
FunkyMcBain said:
I see people saying no root on 5.1. I'm running 5.1 fully rooted. What am I missing
Click to expand...
Click to collapse
Different carriers/devices. The Verizon Moto X currently does not have a 5.1 root or the ability to unlock the bootloader.
Hi all,
Which firmware can I use to get 5.1 on my moto x xt1097?
I have 5.0.1 (claro Chile) 22.21.25.victara_retla.retla.en.01 amxcl
trimax84 said:
Verizon 5.1 file: https://mega.co.nz/#!HtVThLzT
Click to expand...
Click to collapse
MEGA Links need the decrytion key submitted with them - No one can download that file :/
I was going to modify the patch files and start some testing on the Verizon Moto X but I'll need the Firmware.
xSober said:
Hi all,
Which firmware can I use to get 5.1 on my moto x xt1097?
I have 5.0.1 (claro Chile) 22.21.25.victara_retla.retla.en.01 amxcl
Click to expand...
Click to collapse
You can use the 1097 from brazil retail or 1097 for movistar latin america. Another alternative would be to convert your firmware to 1095.
There will not be 5.1 for claro. Claro and Motorola had a fight. Claro no longer sells motorola phones, nor will be pushing firmware updates for them.
Sent from my XT1095 using Tapatalk
Haxxa said:
MEGA Links need the decrytion key submitted with them - No one can download that file :/
I was going to modify the patch files and start some testing on the Verizon Moto X but I'll need the Firmware.
Click to expand...
Click to collapse
Whoops! Hi guys, I'm new here
https://mega.nz/#!HtVThLzT!5_3fSnkEq5fgiyxrSDODrl5Cr0lhrL6iutGPXYvV6qQ
AGISCI said:
... Unrelated to what I said. We are talking about risking bricks, not about mofo.
Click to expand...
Click to collapse
But very important info to those of us on the XT1096 nonetheless.
I am in desperate need of the 5.1 firmware for the XT1093 US Cellular ASAP
phillybizzle said:
I am in desperate need of the 5.1 firmware for the XT1093 US Cellular ASAP
Click to expand...
Click to collapse
http://www.filefactory.com/file/1fib372p0cbv/VICTARA_USC_XT1093_5.1_LPE23.32-21.3_cid9_CFC.xml.zip
Sent from my XT1095 using Tapatalk
Nicolae-Daniel said:
Hey! Here is the one for XT1092 RETEU . You may add it to OP.
https://drive.google.com/file/d/0B-hH_8StWH5-VzMwRXdLZ0tTRWM/view?usp=sharing
I'll leave this here :
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img_sparsechunk.0
$ fastboot flash system system.img_sparsechunk.1
$ fastboot flash system system.img_sparsechunk.2
$ fastboot flash system system.img_sparsechunk.3
$ fastboot flash system system.img_sparsechunk.4
$ fastboot flash system system.img_sparsechunk.5
$ fastboot flash system system.img_sparsechunk.6
$ fastboot flash system system.img_sparsechunk.7
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot erase userdata (not mandatory)
$ fastboot erase cache (not mandatory)
$ fastboot reboot
Click to expand...
Click to collapse
Are you flashing these with mfastboot? Or Android SDK fastboot? I have a mac and would love to figure out how to restore my xt1095 without borrowing a PC. Thanks in advance! I should mention that I'm not asking for instructions on how to use fastboot on a mac, I'm pretty well versed in that, but moto has thrown me a curve ball with this whole moto fastboot thing...
Related
Disclaimer
What's posted here is tested before sharing
but if something bad happens, it's not my problem.Originally posted @MotoModTR by »CanERYVZ« to restore the stock firmware of any XT1033 converted to XT1032 GPE 4.4.2 with deej_roamer's instructions posted here,then OTA'd to GPE 4.4.4. I'm just sharing, all credits to »CanERYVZ« :good:
Your device will be restored to XT1033 Asia.retail 4.4.2 successfully
TESTED and WORKS for XT1033 Asia Retail Dual-Sim version.
1- Download 4.4.2 stock version for your device RETAIL-AS_FALCON_KXB20.25-1.31_cid7_CFC_1FF.xml.zip
1a- Extract firmware to c:\retail
2- Download stock OTA 4.4.4 file for XT1033 Blur_Version.171.44.31.falcon_umtsds.AsiaRetail.en.03.zip
2a- Extract just the 3 files "gpt.bin", "logo.bin" and "emmc_appsboot.mbn" to c:\retail and overwrite the old ones.
3- Download mfastboot-adb.rar
3a- Extract mfastboot-adb.rar to c:\retail
4- Open CMD (command prompt) and go to C:\retail (type cd c:\retail in cmd)
Note: you need to run command prompt as administrator.
4a- Type the following commands one by one:
Code:
mfastboot flash aboot emmc_appsboot.mbn
mfastboot flash partition gpt.bin
mfastboot reboot-bootloader
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot
5- Go to stock recovery. Wipe data / factory reset and wipe cache for a clean start.
ps : motoboot partition will result error because we don't have it in the moto 4.4.4 ota file, just don't worry and continue. :good:
Greetings. :highfive::good:
So, this will restore the mobile from GPE to Stock 4.4.4 with dual sim capability ?
When does the android s friends
No,
This will restore XT1033 from GPE 4.4.4 to Moto 4.4.2 , but if you like you can OTA to Moto 4.4.4.
When does the android l friends
Awesome, but i have a question.
Some people just take the gpt.bin, replace it to 4.4.2 firmware pakage and flash without flashing motoboot.img.then ok.
Some people take logo.bin too.
But i did not see anyone take the emmc_appsboot.mbn. can u explain what is emmc_appsboot.mbn
Sorry for being noob.
Btw, how many devices did u test?
Sent from my SM-G900F using Tapatalk
@windylawyer.1712,
Hi,
i need to say that i'm a noob when it comes to qualcomm platform but after a little research in google, i got some results and to my understanding ;
emmc_appsboot.mbn which is flashed into aboot partition keeps information about the emmc file system structure. So what's aboot partition ? I'll quote from Master Dan Rosenberg here.
aboot loads the kernel and ramdisk into memory at the addresses requested by the boot image header, and then signature validation is performed after this loading is complete. Because the boot image header is read straight from eMMC flash prior to any signature validation, it contains essentially untrusted data. As a result, it's possible to flash a maliciously crafted boot image whose header values cause aboot to read the kernel or ramdisk into physical memory directly on top of aboot itself!
Click to expand...
Click to collapse
Other methods that i've seen without the " emmc_appsboot.mbn " flashing step, seems to halt the phone on startup and returns to bootloader menu, then you need to press Normal Powerup to boot the device.
However the method in OP, the phone just boots fine. Hope this helps and if there's something to be corrected, i'd be more than happy to learn something new.
fatihtpr said:
When does the android l friends
Click to expand...
Click to collapse
Hello fatih,
I think XT1032 GPE will get Android L after a month for the Nexus Line. XT1033 or XT1032 moto editions might get it about 3 months...
Semseddin said:
Hello fatih,
I think XT1032 GPE will get Android L after a month for the Nexus Line. XT1033 or XT1032 moto editions might get it about 3 months...
Click to expand...
Click to collapse
Hello şemseddin thank for as ne.
What is the difference between xt 1033 xt1032 and wonder?
fatihtpr said:
Hello şemseddin thank for as ne.
What is the difference between xt 1033 xt1032 and wonder?
Click to expand...
Click to collapse
Xt1032 is one sim version.
Xt1033 is dual sim version
Gửi từ GT-N7105 của tôi bằng cách sử dụng Tapatalk
Thanks windylawyer
Thanks OP...
THANKS!!!
thank youuu good sir! this is total life saver!!
Preflash validation failed
I have got a 1032. Used to have GPE, installed as 4.4.2, OTA upgraded to 4.4.4.
I want to get back the Motorola ROM, 4.4.2, or 4.4.4.
When I tried, I got a few "Preflash validation failed" errors, bootloader complains: "version downgraded for xxx". After the "downgrade" I have got just bootloader and recovery. No sstem can be booted/installed.
I have also tried this script (first few steps), but I have got the same errors for the first 2 commands
Tried with 4.4.2 and 4.4.4 xml.zip versions as well.
Code:
mfastboot flash aboot emmc_appsboot.mbn
mfastboot flash partition gpt.bin
mfastboot reboot-bootloader
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot oem fb_mode_clear
mfastboot reboot
... and after the whole thing ran, boot process stops in logo (bootloader is open blahblahblah...)
bootloader / recovery can be started, nothing more.
is this method working successfully??
jbanti said:
is this method working successfully??
Click to expand...
Click to collapse
Yes
can i ota after following this procedure to restore to xt1033 firmware?
pfufle said:
can i ota after following this procedure to restore to xt1033 firmware?
Click to expand...
Click to collapse
YES... u can its fully Stock
Sent from my XT1033
Bootloader unlocked flashing and stuck
Semseddin said:
@windylawyer.1712,
Hi,
i need to say that i'm a noob when it comes to qualcomm platform but after a little research in google, i got some results and to my understanding ;
emmc_appsboot.mbn which is flashed into aboot partition keeps information about the emmc file system structure. So what's aboot partition ? I'll quote from Master Dan Rosenberg here.
Other methods that i've seen without the " emmc_appsboot.mbn " flashing step, seems to halt the phone on startup and returns to bootloader menu, then you need to press Normal Powerup to boot the device.
However the method in OP, the phone just boots fine. Hope this helps and if there's something to be corrected, i'd be more than happy to learn something new.
Click to expand...
Click to collapse
please somebody help.....after doing all this my screens blink with logo of BOOTLOADER UNLOCKED........and when i go to the fastbootboot and connect usb it now doesnt recognize it........plz help me save my moto g....plzzzzzzzzzzzzzzzz
Haven't seen it around here, so I thought sharing is caring:
Image of Lollipop 5.0 RETEUALL for XT1092 version LXE22.46-19
DOWNLOAD http://motofirmware.com/files/file/1055-reteuall-xt1092-50-lxe2246-19-cid7-cfcxmlzip/
Enjoy!
How to flash (taken from https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images and modified)
After downloading the image for your device:
Unzip the image.
Put your device in fastboot mode. [e.g. by using "$ fastboot reboot"]
NOTE: You must use the Motorola fastboot utility to flash (included in the Darwin/, Linux/ or Windows/ directory). Please do NOT use the Android fastboot utility [better known as "mfastboot.exe" - so you probably change the command "fastboot" to "mfastboot"]
Follow the flashing steps in the .xml file that was included in the package.
A typical flashing sequence includes all these partitions, but might vary depending on your product - so please use the sequence in the .xml file in your package:
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img_sparsechunk.0
$ fastboot flash system system.img_sparsechunk.1
$ fastboot flash system system.img_sparsechunk.2
$ fastboot flash system system.img_sparsechunk.3
$ fastboot flash system system.img_sparsechunk.4
$ fastboot flash system system.img_sparsechunk.5
$ fastboot flash system system.img_sparsechunk.6
$ fastboot flash system system.img_sparsechunk.7
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot erase customize [leave that out if you have special customization from motomaker]
$ fastboot erase clogo [leave that out if you have special customization from motomaker]
$ fastboot reboot
You also have the option to erase all the data on your device with
$ fastboot erase userdata
$ fastboot erase cache
Click to expand...
Click to collapse
If you don't know how to flash it - don't! I am not responsible if anything goes wrong!
Whats the method to flash this ?
willy_907 said:
Whats the method to flash this ?
Click to expand...
Click to collapse
added a quick tutorial from motorola with a few modifications and notes.
Hi good afternoon , I Flashed with RSD LITE , and perfect. thank you very much
regards
Is there anyone who would be able to get hold of Motorola signed images? That would be aweosme.
Many thanks for this too
subhramani said:
Is there anyone who would be able to get hold of Motorola signed images? That would be aweosme.
Many thanks for this too
Click to expand...
Click to collapse
What would be the use for this? For devices without an unlockable bootloader? Just curious why this wouldn't suffice.
It will be useful when you want to lock the bootloader back again.
I'm sure you'll want it if you were from a country like mine.
subhramani said:
It will be useful when you want to lock the bootloader back again.
I'm sure you'll want it if you were from a country like mine.
Click to expand...
Click to collapse
Once you request for the unlock code and unlock the bootloader of your device its done, relocking won't help you to claim warranty if the service center guy looks it up.
nithin1992 said:
Once you request for the unlock code and unlock the bootloader of your device its done, relocking won't help you to claim warranty if the service center guy looks it up.
Click to expand...
Click to collapse
Worth keeping it justin case right?
I think it's time to finally unlock the bootloader of my phone, now I have the factory firmware for my model and variant
Thanks for this.
How to know if mine is RETEUALL or other?
Thanks
Edit: solved thanks
Hi, thanks for the upload.
I have a question, as my device is XT1092, the european version. But my carrier, Orange Spain, sells the Moto X unlocked, or they say so, and my phone version goes by 21.21.45.victara_oraeu.oraeuall.en.EU oraes. Should I be able to flash the ROM? I have experience doing so, so my question is just this one.
Thanks.
Yes, you can flash this image.
I myself flashed it on my French Orange Moto X (orafr).
-iNSiGhT- said:
Yes, you can flash this image.
I myself flashed it on my French Orange Moto X (orafr).
Click to expand...
Click to collapse
Good to know, thanks!
I'm pretty sure I flashed this file on my Orange Moto X but I still have "orafr" after "22.21.19.victara_reteu.reteuall.en.eu".
Is it the same for you ?
ichi go said:
Good to know, thanks!
I'm pretty sure I flashed this file on my Orange Moto X but I still have "orafr" after "22.21.19.victara_reteu.reteuall.en.eu".
Is it the same for you ?
Click to expand...
Click to collapse
I have that too, but since i flashed the retail modem (modem and fsg files) i think the "orafr" is related to the efs partition (something we don't "touch" during the flash process.
-iNSiGhT- said:
I have that too, but since i flashed the retail modem (modem and fsg files) i think the "orafr" is related to the efs partition (something we dont "touch" during the flash process.
Click to expand...
Click to collapse
OK, you're probably right.
Thanks for your answer.
NVM Posted in the wrong thread.
Hello to All
Can someone give me a good link to the mg file, the link is broken...
Thank you
cesarium said:
Hello to All
Can someone give me a good link to the mg file, the link is broken...
Thank you
Click to expand...
Click to collapse
http://www.androidgb.com/download-moto-x-2nd-gen-2014-android-5-0-lollipop-factory-image-784/
Nicolae-Daniel said:
http://www.androidgb.com/download-moto-x-2nd-gen-2014-android-5-0-lollipop-factory-image-784/
Click to expand...
Click to collapse
was searching for the 5.0 stock cause each time i've downgraded to stock 4.4.4 and OTA'd to the latest.. and it was timeboggling!
Thank you!
Rogers Canada
http://www.filefactory.com/file/386..._subsidy-RGRCA_regulatory-DEFAULT_CFC.xml.zip
Telus Canada
http://www.filefactory.com/file/3pe..._subsidy-TELUS_regulatory-DEFAULT_CFC.xml.zip
Retail Mexico
http://www.filefactory.com/file/50m...d50_subsidy-DEFAULT_regulatory-03_CFC.xml.zip
Retail Europe
http://www.filefactory.com/file/6ht...ubsidy-DEFAULT_regulatory-03_CFC_EMEA.xml.zip
Retail Canada
http://www.filefactory.com/file/3vz...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
? (Colombia)
http://www.filefactory.com/file/102...ubsidy-MOVSTLA_regulatory-DEFAULT_CFC.xml.zip
At&t Mexico
http://www.filefactory.com/file/3qf...sidy-IUSMXLA_regulatory-03_CFC_ATT_MX.xml.zip
Bell Canada
http://www.filefactory.com/file/57c...subsidy-BELLCA_regulatory-DEFAULT_CFC.xml.zip
Verizon
http://www.filefactory.com/file/662...MCL24.203-22_cid2_subsidy-DEFAULT_CFC.xml.zip
http://www.filefactory.com/file/1iq...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Retail China
http://www.filefactory.com/file/1ar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
great! You have the folder link in FileFactory?
Hello.
http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25
Thank you.
Hello,
How to install the rom?
Thank you.
tonime said:
Hello,
How to install the rom?
Thank you.
Click to expand...
Click to collapse
Flash it manually using mfastboot command.
I have a doubt, i purchased a moto z with at&t México and flashed the retail firmware of this thread for my country and works fine, but when i enter in bootloader mode the info of the Phone shows that my Phone is a sheridan version, so i'm confused, what version i have? ��
nesgcmx said:
I have a doubt, i purchased a moto z with at&t México and flashed the retail firmware of this thread for my country and works fine, but when i enter in bootloader mode the info of the Phone shows that my iPhone is a sheridan version, so i'm confused, what version i have? ��
Click to expand...
Click to collapse
Probably Griffin. As others already reported, on bootloader mode all reports to be Sheridans... :fingers-crossed:
enetec said:
Probably Griffin. As others already reported, on bootloader mode all reports to be Sheridans... :fingers-crossed:
Click to expand...
Click to collapse
Moto Z has two product name.
alphaeva said:
Moto Z has two product name.
Click to expand...
Click to collapse
Yeah, just to make things more... confused!
We have Z, Force, Play, single sim, dual sim, Verizon's, unlocked, etc... we *really* need confused codename and product codes to help us on this...
Anyway @motorola they are surely fans of The Griffin's series..... Sheridan is the surname of the series' director...
Located the US firmware and uploaded it to Mega if anyone needs it https://mega.nz/#!vtVmgAoI!J1cZtlRi0FjRHbxIJGA5U8CLx6RwUWQjwrCbjzf_Naw
How do you "Flash it manually using mfastboot command."?
<redacted>
<How do you delete a post?>
SolusCado said:
How do you "Flash it manually using mfastboot command."?
Click to expand...
Click to collapse
fastboot flash partition gpt.bin
fastboot flash motoboot boot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash system system.img_sparsechunk.13
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Keep in mind depending on the region you're flashing you may have a different number of sparse chunks (I think VZW has like 16, where as stock has like 13) You just enter the amount of sparse chunks you need to flash.
Prfndhatrdofman said:
fastboot flash partition gpt.bin
fastboot flash motoboot boot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash system system.img_sparsechunk.13
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Keep in mind depending on the region you're flashing you may have a different number of sparse chunks (I think VZW has like 16, where as stock has like 13) You just enter the amount of sparse chunks you need to flash.
Click to expand...
Click to collapse
Thanks; that worked - though now I find that the pre-Rooted EU ROM I was using doesn't seem to work with my Hasselblad Camera Mod.
SolusCado said:
Thanks; that worked - though now I find that the pre-Rooted EU ROM I was using doesn't seem to work with my Hasselblad Camera Mod.
Click to expand...
Click to collapse
I would just root yourself then. I couldn't get systemless root to work with the current TWRP available so I just flashed a forced System ROOT instead.
http://forum.xda-developers.com/apps/supersu/v2-64-2-66-supersu-mode-t3286120
Download from there and flash it in TWRP. But say goodbye to Android pay obviously
:/ Ok; try as I might I cannot seem to get my Moto Z to boot if I have SuperSU installed. My bootloader is unlocked, and I've been able to flash different ROMS with no problem. But if I try to install SuperSU (v2.78-SR1) to a working ROM, or install JanJan's pre-rooted US ROM, then Android simply never boots. I just downloaded the three more recent versions of SuperSU to give them a try, but does anyone have any suggestions of what I might be doing wrong here?
SolusCado said:
:/ Ok; try as I might I cannot seem to get my Moto Z to boot if I have SuperSU installed. My bootloader is unlocked, and I've been able to flash different ROMS with no problem. But if I try to install SuperSU (v2.78-SR1) to a working ROM, or install JanJan's pre-rooted US ROM, then Android simply never boots. I just downloaded the three more recent versions of SuperSU to give them a try, but does anyone have any suggestions of what I might be doing wrong here?
Click to expand...
Click to collapse
Sounds to me like you need a different Boot image then. I flashed the boot.img that was disabled force encryption, then flashed the System mode SuperSU. No issues at all. US Moto Z 64 GB model.
link to indian firmware...not able to download it as filefactory.com is restricted... tried via apn also still a no go...can anyone download it and upload it to other server??
http://www.filefactory.com/file/20s..._subsidy-DEFAULT_regulatory-XT1650-03.xml.zip
Prfndhatrdofman said:
Located the US firmware and uploaded it to Mega if anyone needs it https://mega.nz/#!vtVmgAoI!J1cZtlRi0FjRHbxIJGA5U8CLx6RwUWQjwrCbjzf_Naw
Click to expand...
Click to collapse
Do this have the modem (baseband) included?.. I need to completely put everything back to factory.
---------- Post added at 04:29 PM ---------- Previous post was at 04:21 PM ----------
dallas90733 said:
Do this have the modem (baseband) included?.. I need to completely put everything back to factory.
Click to expand...
Click to collapse
Nevermind- I didn't read
I updated my moto g4 plus xt1643 using the update zip given by @rahulsnair. The update went perfectly and I booted up in Nougat 7.0.
I flashed twrp recovery and it worked too. After that I tried flashing new updated supersu to root Nougat 7.0. Unfortunately it didn't work out as I was stuck at boot. I then tried to flash the stock mm rom,but now its giving me flash failure in the second step of the command line.
Fastboot flash partition gpt.bin
Can anyone help me how to go back to mm as there is no Nougat stock zip file which I can flash over it. The only choice is to go back to mm stock which seems to be impossible for me.. Thanks in advance
Did you try systemless root? If you wanna get back to marshmallow, try flashing only the system partitions and boot image. Also wipe userdata.
Sent from my Moto G4 Plus using Tapatalk
Don't flash gpt.bin and bootloader when get back to mm. You can use unsu.zip to unsu and flash systemless SuperSU or use magisk not necessary to downgrade.
http://forum.xda-developers.com/showpost.php?p=63615067
Deleted.
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
Did you try systemless root? If you wanna get back to marshmallow, try flashing only the system partitions and boot image. Also wipe userdata.
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
What do you mean by system partition and boot image only. Can you tell me the steps please...
PremanshuRaj said:
What do you mean by system partition and boot image only. Can you tell me the steps please...
Click to expand...
Click to collapse
Windows
Code:
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot erase userdata
fastboot reboot
Linux
Code:
sudo fastboot flash boot boot.img && sudo fastboot flash system system.img_sparsechunk.0 && sudo fastboot flash system system.img_sparsechunk.1 && sudo fastboot flash system system.img_sparsechunk.2 && sudo fastboot flash system system.img_sparsechunk.3 && sudo fastboot flash system system.img_sparsechunk.4 && sudo fastboot flash system system.img_sparsechunk.5 && sudo fastboot flash system system.img_sparsechunk.6 && sudo fastboot flash system system.img_sparsechunk.7 && sudo fastboot erase userdata && sudo fastboot reboot
Silesh.Nair said:
Windows
Code:
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot erase userdata
fastboot reboot
Linux
Code:
sudo fastboot flash boot boot.img && sudo fastboot flash system system.img_sparsechunk.0 && sudo fastboot flash system system.img_sparsechunk.1 && sudo fastboot flash system system.img_sparsechunk.2 && sudo fastboot flash system system.img_sparsechunk.3 && sudo fastboot flash system system.img_sparsechunk.4 && sudo fastboot flash system system.img_sparsechunk.5 && sudo fastboot flash system system.img_sparsechunk.6 && sudo fastboot flash system system.img_sparsechunk.7 && sudo fastboot erase userdata && sudo fastboot reboot
Click to expand...
Click to collapse
I am in CM 13 right now... Coz I didn't have any other option after the stuck on boot.
Will these steps still work even now?
Yes
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
Yes
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
It still showing error when I flash the first step.
Fastboot flash boot boot.img
It's saying "image not signed or corrupted"
Also I saw that my baseband version is also updated to the Nougat version.
That's only a warning. Show me a screenshot of the actual terminal running the command.
N baseband works on M.
If you have a nandroid backup of your M stock ROM, flashing that would also be sufficient.
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
That's only a warning. Show me a screenshot of the actual terminal running the command.
N baseband works on M.
If you have a nandroid backup of your M stock ROM, flashing that would also be sufficient.
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
I don't have a nandroid backup with me. Also whenever I reboot my phone it goes directly into bootloader. And when I check boot logs it says.
Bootloader reason "bootmode" is selected as "fastboot".
This is the screenshot when I tried flashing the boot.img
Well your boot image flashed successfully. Did you see the OKAY word?
That's all the information I can give you. You gotta figure it out now.
Sent from my Moto G4 Plus using Tapatalk
Worked
Silesh.Nair said:
Well your boot image flashed successfully. Did you see the OKAY word?
That's all the information I can give you. You gotta figure it out now.
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
Thanks it worked ..
I am back in stock mm.
But it still goes into bootloader mode whenver i reboot or start the phone
Wel, I just tried it and it worked without any issues. No problem like you mentioned.
Silesh.Nair said:
Wel, I just tried it and it worked without any issues. No problem like you mentioned.
Click to expand...
Click to collapse
It started when i flashed that root zip previously. now i have flashed stock rom from scratch still it goes into bootloader mode always.
Is there any way to change the bootmode from fastboot to normal start
still camera lag problem not solved...lemoto not working on that problem..then y they give us update ****ing...
how to root naughat?
---------- Post added at 01:24 PM ---------- Previous post was at 01:24 PM ----------
still camera lag problem not solved...lemoto not working on that problem..then y they give us update ****ing...
how to root naughat?
Silesh.Nair said:
Wel, I just tried it and it worked without any issues. No problem like you mentioned.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=69232448
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
Windows
Code:
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot erase userdata
fastboot reboot
Linux
Code:
sudo fastboot flash boot boot.img && sudo fastboot flash system system.img_sparsechunk.0 && sudo fastboot flash system system.img_sparsechunk.1 && sudo fastboot flash system system.img_sparsechunk.2 && sudo fastboot flash system system.img_sparsechunk.3 && sudo fastboot flash system system.img_sparsechunk.4 && sudo fastboot flash system system.img_sparsechunk.5 && sudo fastboot flash system system.img_sparsechunk.6 && sudo fastboot flash system system.img_sparsechunk.7 && sudo fastboot erase userdata && sudo fastboot reboot
Click to expand...
Click to collapse
its not working
[email protected] said:
its not working
Click to expand...
Click to collapse
Are you flashing correct rom.
Whay error it giving.
SMARTHACKER67 said:
Are you flashing correct rom.
Whay error it giving.
Click to expand...
Click to collapse
im flashing 139-63 marshmallow zip
http://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1643-updated-signed-t3460695
im on noughat
http://forum.xda-developers.com/moto-g4-plus/how-to/xt1643-ota-nougat-t3483943/page20
its showing bootloader downgrade error
---------- Post added at 01:32 PM ---------- Previous post was at 01:26 PM ----------
PremanshuRaj said:
Thanks it worked ..
I am back in stock mm.
But it still goes into bootloader mode whenver i reboot or start the phone
Click to expand...
Click to collapse
How did you get back to stock can you post the procedure
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
BR firmware with november update for xt1672, only this one worked for me to relock bootloader :fingers-crossed:
Ellcid01 said:
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
BR firmware with november update for xt1672, only this one worked for me to relock bootloader :fingers-crossed:
Click to expand...
Click to collapse
I can't download from there. Can you upload a mirror? To androidfilehost, google drive. Thank you.
Ellcid01 said:
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
BR firmware with november update for xt1672, only this one worked for me to relock bootloader :fingers-crossed:
Click to expand...
Click to collapse
No download link. ?
Fedray said:
I can't download from there. Can you upload a mirror? To androidfilehost, google drive. Thank you.
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=745849072291696119
Ellcid01 said:
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
BR firmware with november update for xt1672, only this one worked for me to relock bootloader :fingers-crossed:
Click to expand...
Click to collapse
I confirm that it works perfectly even on variant XT1675 Tim Italy single sim 16 GB storage 2 GB ram thanks.:good:
Ellcid01 said:
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
BR firmware with november update for xt1672, only this one worked for me to relock bootloader :fingers-crossed:
Click to expand...
Click to collapse
Can confirm that the above ROM works with my Moto G5 XT1675 (UK), I flashed this and was (finally!) able to re-lock the phone's bootloader.
Has anyone tried this on the 3gb/16gb dual SIM variant
ROM works for X1676 2/16, but bootloader isn't able to lock
Nice! Though I have used firmware from the firmware centre and have managed to relock the bootloader....
people what about motoG5 xt1677
hello, it works on xt1671, I used it to update my phone (without erase any data) and it works, it's curious that the software channel is still the same that I ever had, tigco, that means Tigo Colombia (i'm from Colombia).
Nicomix said:
hello, it works on xt1671, I used it to update my phone (without erase any data) and it works, it's curious that the software channel is still the same that I ever had, tigco, that means Tigo Colombia (i'm from Colombia).
Click to expand...
Click to collapse
How'd you manage to do just update it?
NM99 said:
How'd you manage to do just update it?
Click to expand...
Click to collapse
I just use fastboot in this way:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
without write "fastboot erase userdata".
Ellcid01 said:
https://androidfilehost.com/?fid=745849072291696119
Click to expand...
Click to collapse
Hey friend this work for my moto g5 NPP25.137-72 XT1670??????
rosel11078 said:
Hey friend this work for my moto g5 NPP25.137-72 XT1670??????
Click to expand...
Click to collapse
Dont know i have only xt1672
Ellcid01 said:
Dont know i have only xt1672
Click to expand...
Click to collapse
I visit here https://firmware.center/firmware/Motorola/Moto G5/Stock/
the site only show solution for XT1670 and 1677 so Maybe work, I don't know we need to ask somebody here
masterdex said:
I confirm that it works perfectly even on variant XT1675 Tim Italy single sim 16 GB storage 2 GB ram thanks.:good:
Click to expand...
Click to collapse
I confirm the same. Thanks!
How do I lock the bootloader with this update? I tried yesterday but couldn't do it, got the bad key message.
EDIT: Nevermind, today at work I was able to lock it. Hopefully I'll be able to get OTA updates.
Hi, how can i install it? Do i have to flash from twrp?
Nicomix said:
I just use fastboot in this way:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
without write "fastboot erase userdata".
Click to expand...
Click to collapse
DO NOT USE THIS PROCEDURE!
I just hard-bricked my MOTO G5 XT1676 with this.