voLTE on n910u Rogers - Galaxy Note 4 Q&A, Help & Troubleshooting

I can see the voLTE in the menu but I can't turn it on. Has anyone had any success getting voLTE working on a n910u with Rogers?

[email protected] said:
I can see the voLTE in the menu but I can't turn it on. Has anyone had any success getting voLTE working on a n910u with Rogers?
Click to expand...
Click to collapse
I have the same device, but I don't see voLTE menu. Where did you find that menu? I have this question as well.

LTE-X said:
I have the same device, but I don't see voLTE menu. Where did you find that menu? I have this question as well.
Click to expand...
Click to collapse
first off are you running 5.0.1?
settings > more networks > mobile networks > voLTE call (this is greyed out and I cant toggle it.)
There is also a toggle in the pull down bar from the top where I can also try to enable voLTE but it says "voLTE is not supported by your current software version. Contact customer service for more details."

[email protected] said:
first off are you running 5.0.1?
settings > more networks > mobile networks > voLTE call (this is greyed out and I cant toggle it.)
There is also a toggle in the pull down bar from the top where I can also try to enable voLTE but it says "voLTE is not supported by your current software version. Contact customer service for more details."
Click to expand...
Click to collapse
Thanks for your reply!
Yes I am running Android 5.0.1.
I don't see voLTE setting anywhere. This is odd. Which region(CSC) ROM are you using? I am currently using Taiwanese (CSC-->BRI) ROM.

LTE-X said:
Thanks for your reply!
Yes I am running Android 5.0.1.
I don't see voLTE setting anywhere. This is odd. Which region(CSC) ROM are you using? I am currently using Taiwanese (CSC-->BRI) ROM.
Click to expand...
Click to collapse
I think I'm using Hong Kong. not sure what CSC --> BRI mean.

[email protected] said:
I think I'm using Hong Kong. not sure what CSC --> BRI mean.
Click to expand...
Click to collapse
BRI is the region code(CSC) for Taiwan. Sorry about the confusion.
Some carriers only make voLTE services available for carrier branded devices, not unlocked/international devices. I will flash the Hong Kong ROM and find out either it's a carrier-related issue or a ROM(software) related issue.

Hmm wonder if there is a way to spoof my device type.

I flashed the Hong Kong ROM and I can confirm that voLTE feature is enabled by the carrier. I tested this out with T-Mobile USA and AT&T. I was able to make voLTE calls on AT&T, but not on T-Mobile. This is not a device problem.

LTE-X said:
I flashed the Hong Kong ROM and I can confirm that voLTE feature is enabled by the carrier. I tested this out with T-Mobile USA and AT&T. I was able to make voLTE calls on AT&T, but not on T-Mobile. This is not a device problem.
Click to expand...
Click to collapse
Hmm do I call my provider and ***** and moan?

[email protected] said:
Hmm do I call my provider and ***** and moan?
Click to expand...
Click to collapse
I wouldn't call the carrier. When I called T-Mobile USA, their response was "Your phone is not supported on the network, therefore you won't be able to utilize any feature of the network properly."

Can I install that Hong kong ROM on sm-910c

Related

Enable volte on g900i

Hello, I recently tried a reliance jio sim in India. This carrier only offers calling through volte and there is no volte option in my s5.
Can anyone tell me if a custom rom can enable this function or flashing a rom from different country like australia will solve this problem?
Appreciate all the help.
one of the dark roms has it --- im running the rom but i don't have the facility of Volte ...
Give it a try
DarkLord N5 UX2 N920SKSU2ZPFB-G900F
Vaibhavs800 said:
Hello, I recently tried a reliance jio sim in India. This carrier only offers calling through volte and there is no volte option in my s5.
Can anyone tell me if a custom rom can enable this function or flashing a rom from different country like australia will solve this problem?
Appreciate all the help.
Click to expand...
Click to collapse
i have g900i also and jio sim but did not work..
beargeo said:
one of the dark roms has it --- im running the rom but i don't have the facility of Volte ...
Give it a try
DarkLord N5 UX2 N920SKSU2ZPFB-G900F
Click to expand...
Click to collapse
Thanks, I will try it.
Volte
Did it work!?
i tried replacing s5 csc folder with csc folders from volte enabled version of s6. it catches volte for sometime and then loses signal altogether. volte is shown be two large arrows pointing to left and right
Nee csc does not support volte
As per Alexander csc "nee" should support volte but jio sim getonly 4g network no voice calling i have to an stupid app with my internet open 24hr to make call lol.
Rom im using xxx version 5.2
.
I did a fresh install of AUT csc version. Through odin.
Still in not getting Volte option.
Is thir something im missing.
Help.
In custom xls i see volte text and in others xls alsi see volte text wirtten
---------- Post added at 01:43 AM ---------- Previous post was at 01:38 AM ----------
For jio sim we have call jio center and give them Imie number so they can enable volte for your phone
After lot of search it seem my s5 g900f will not support JIO.
S5 does not support band with 40
All qualcomm varients of Galaxy S5 supports all possible bands. Search for app called "Hidden settings" and switch band to EURO or auto and you would get band 40. I am still trying to figure out the VOLTE code. I will try the Darklord custom rom, but switching roms is a time consuming task. One day...
keshey said:
All qualcomm varients of Galaxy S5 supports all possible bands. Search for app called "Hidden settings" and switch band to EURO or auto and you would get band 40. I am still trying to figure out the VOLTE code. I will try the Darklord custom rom, but switching roms is a time consuming task. One day...
Click to expand...
Click to collapse
I did install the app but i wad not to find opton to change euro or auto nor i was able too option band
I tried to change band setting from QXDM
For 40 - 549755813888 ( no network)
Then agian changed to 549755813908 (which is total of 3 ,5 and 40) network is back but still no volte
gpkumaran said:
i tried replacing s5 csc folder with csc folders from volte enabled version of s6. it catches volte for sometime and then loses signal altogether. volte is shown be two large arrows pointing to left and right
Click to expand...
Click to collapse
Can u give us those s6 CSC files ...that u replaced...so that I can give it atry on my G900I

Is VOLTE Available on Note4?

I would like to know is there anyone able to use VOLTE on NOTE4? I asked the staff with Samsung Singapore and they reply "not supported".
However, I saw some ROMs from India version (CSC INU) that claims support of VOLTE. But I tried and not support.
Hence I would like to ask how can we use VOLTE on NOTE4? Or someone can give me a confirmed "no" reply? Thanks.
I recently did a update from Lollipop 5.1.1 to Marshmallow 6.0.1 and there is VoLTE option within the settings and the quick settings.
You can try to update to 6.0.1. Let me know if it is there.
cedricyeo said:
I recently did a update from Lollipop 5.1.1 to Marshmallow 6.0.1 and there is VoLTE option within the settings and the quick settings.
You can try to update to 6.0.1. Let me know if it is there.
Click to expand...
Click to collapse
What is your model of NOTE4? And what is your CSC?
Mine is N910G, Singapore version CSC MM1.
Jio 4G network is working fine with my N910C .
raisqureshi said:
Jio 4G network is working fine with my N910C .
Click to expand...
Click to collapse
even VOLTE calling?

S8 Custom ROMs and AT&T WiFi Calling

Are there any custom ROMs (and CSC files) that allow the S8 to successfully have WiFi Calling and VoLTE on the AT&T network??
I am running RENOVATE ICE 3.0 but you need the Notorious Kernel 1.9 for Volte to work on T. Some kernels do not support Volte, but Notorious does. You also need to flash ATT from the Flashable CSC Selection V1.0.0, and create/edit the /efs/imei/mps_code.dat and put ATT in there. You can also delete the /system/omc/ATT/res directory to get rid of the annoying T jingle and boot screen. You then need to call ATT and ask the friendly customer service person to update your IMEI. But when you give them your current IMEI, they will not be able to find it since it is not a ATT phone. So they will use the IMEI of a similar phone. That will get Volte to work. But WiFi will not as I think the IMEI must match exactly in their system for WiFi to work.
Hello. I'm also trying to figure out the same. How can I unlock the G955U? is that even possible?
Ideally I'd like to get the CSC Patch installed so I can get WiFi Calling on ATT, as I do not have any reception in my area. Any Help here would be appreciated.
Can anyone help here? Thanks.
jcrompton said:
Are there any custom ROMs (and CSC files) that allow the S8 to successfully have WiFi Calling and VoLTE on the AT&T network??
Click to expand...
Click to collapse
You can flash csc seletcion after the rom.
That package contains the csc of att and the US generic. That generic is the one that I use and it works volte, wifi calling in tmobile ...
Hi Eddie, would you happen to know how to Root the G955U? its the Unlocked version of the phone. I've followed every step for CF-Auto-Root through Odin, but it fails every time. It seems like the Bootloader is locked? Any help would be appreciated here.
EddiePR said:
You can flash csc seletcion after the rom.
That package contains the csc of att and the US generic. That generic is the one that I use and it works volte, wifi calling in tmobile ...
Click to expand...
Click to collapse
Thanks
But I'm still trying to confirm that someone got AT&T WiFi calling to work
indoline said:
Hi Eddie, would you happen to know how to Root the G955U? its the Unlocked version of the phone. I've followed every step for CF-Auto-Root through Odin, but it fails every time. It seems like the Bootloader is locked? Any help would be appreciated here.
Click to expand...
Click to collapse
If you want to know the current root status for Galaxy S8/S8+ go to this forum: https://forum.xda-developers.com/galaxy-s8/how-to/current-root-progress-g950u-g955u-t3623444
---------- Post added at 02:21 AM ---------- Previous post was at 02:19 AM ----------
indoline said:
Hello. I'm also trying to figure out the same. How can I unlock the G955U? is that even possible?
Ideally I'd like to get the CSC Patch installed so I can get WiFi Calling on ATT, as I do not have any reception in my area. Any Help here would be appreciated.
Click to expand...
Click to collapse
If you mean network unlock, then follow the ToS on AT&T mobile and eventually you will be allowed to unlock your phone. And for you to switch from the firmware of SM-G955U to SM-G955U1, you gotta go to this forum: https://forum.xda-developers.com/galaxy-s8/how-to/rd-carrier-switch-root-snapdragon-t3597473
You will not get wifi calling unless u can provide to att an imei from a device that has wifi calling. Only feature u will get working is volte. It's different them tmobile.
Sent from my SM-G950U1 using Tapatalk
Strange answers .....
I just wanted to know if anyone had WiFi calling working while on AT&T ??
jcrompton said:
Strange answers .....
I just wanted to know if anyone had WiFi calling working while on AT&T ??
Click to expand...
Click to collapse
They do with a working imei. Could be from another phone on same account.
Sent from my SM-G950U1 using Tapatalk
Thor2j said:
They do with a working imei. Could be from another phone on same account.
Click to expand...
Click to collapse
Thank you for the answer
I am familiar with the need for an IMEI from a branded device ..... But I'm not even completely sure that's working for the S8+ like it did for my S7
I just haven't gotten anyone to 100% confirm WiFi calling on AT&T even with proper IMEI
jcrompton said:
Strange answers .....
I just wanted to know if anyone had WiFi calling working while on AT&T ??
Click to expand...
Click to collapse
Well i don't know from experience with at&t firmware but at&t should have wifi calling by default. If not and if wifi calling is an important feature towards you, then the last resort answer you have is to flash unlock firmware onto your device since that's the firmware everyone can use while it supports wifi calling and VoLTE (Voice Over LTE)
DaNamesFrank said:
Well i don't know from experience with at&t firmware but at&t should have wifi calling by default. If not and if wifi calling is an important feature towards you, then the last resort answer you have is to flash unlock firmware onto your device since that's the firmware everyone can use while it supports wifi calling and VoLTE (Voice Over LTE)
Click to expand...
Click to collapse
Once again, per other threads and myself, simply flashing the att firmware will only give you VOLte. You can toggle the wifi calling but it will say your account doesn't have this feature after about 5 seconds. If u call them and give them an imei number that is to a device that is an att device with the feature it will work. This is different then tmobile which will allow u both without doing anything except flashing their firmware.
Sent from my SM-G950U1 using Tapatalk
Flame Red said:
I am running RENOVATE ICE 3.0 but you need the Notorious Kernel 1.9 for Volte to work on T. Some kernels do not support Volte, but Notorious does. You also need to flash ATT from the Flashable CSC Selection V1.0.0, and create/edit the /efs/imei/mps_code.dat and put ATT in there. You can also delete the /system/omc/ATT/res directory to get rid of the annoying T jingle and boot screen. You then need to call ATT and ask the friendly customer service person to update your IMEI. But when you give them your current IMEI, they will not be able to find it since it is not a ATT phone. So they will use the IMEI of a similar phone. That will get Volte to work. But WiFi will not as I think the IMEI must match exactly in their system for WiFi to work.
Click to expand...
Click to collapse
EddiePR said:
You can flash csc seletcion after the rom.
That package contains the csc of att and the US generic. That generic is the one that I use and it works volte, wifi calling in tmobile ...
Click to expand...
Click to collapse
Thor2j said:
You will not get wifi calling unless u can provide to att an imei from a device that has wifi calling. Only feature u will get working is volte. It's different them tmobile.
Sent from my SM-G950U1 using Tapatalk
Click to expand...
Click to collapse
Thor2j said:
They do with a working imei. Could be from another phone on same account.
Sent from my SM-G950U1 using Tapatalk
Click to expand...
Click to collapse
Thor2j said:
Once again, per other threads and myself, simply flashing the att firmware will only give you VOLte. You can toggle the wifi calling but it will say your account doesn't have this feature after about 5 seconds. If u call them and give them an imei number that is to a device that is an att device with the feature it will work. This is different then tmobile which will allow u both without doing anything except flashing their firmware.
Sent from my SM-G950U1 using Tapatalk
Click to expand...
Click to collapse
Hello all ..... ( and @Tkkg1994 )
I'm still trying to get a definitive answer --- Has anyone personally been able to get an unbranded S8 or S8+ to activate WiFi Calling on the AT&T network (not TMo or others) ??
I'm trying to facilitate an issue with using S8 Ports on my unbranded S7 Edge where we can get VoLTE to work nicely but WiFi Calling will not activate (on the S8 port based ROMs).
I am aware (and have been for quite a while) that you must have an AT&T branded IMEI to get this to work on AT&T. I am also aware that this step is not needed on TMobile or really any other network.
I have tried the branded S7 IMEI that works great on my S7 to activate WiFi Calling while using many (most) S7 based ROMs. I have even tried branded IMEI's from ATT branded S8's and S8+'s .... but I can't get WiFi calling to activate while on any of the S8 port based ROMS (I get VoLTE nicely with many ROMS esp the latest BatMan S8 port ROM)
So to troubleshoot I am trying to confirm that even with the S8 or S8+ that WIFi Calling is or is not a possibilty ??
Thanks
jcrompton said:
So to troubleshoot I am trying to confirm that even with the S8 or S8+ that WIFi Calling is or is not a possibilty ??
Thanks
Click to expand...
Click to collapse
I am no developer, but I believe there are two possible causes in the case of T WiFi failure on Exynos:
Perhaps T requires the IMEI to exactly match as a security measure, and since they cannot use an International model IMEI it will never work.
Or there is something specifically compiled for the Snapdragon process and so when it is extract it will not run on the Exynos.
Either way, it won't work. I posted a LOGCAT when enabling it failed, but it is beyond my capability to debug and no one seemed to be able to figure it out.

I'm trying to figure out which image to download for T-Mobile USA?

What's the difference between USA(XAA), USA(TMK), and USA(CSC)?
http://updato.com/firmware-archive-...1&r=TMK,USC,XAA&v=Nougat(Android+7.0)&rpp=100
There's three "product versions"? What's the difference between them?
Neo3D said:
What's the difference between XAA, TMK, and CSC?
http://updato.com/firmware-archive-...1&r=TMK,USC,XAA&v=Nougat(Android+7.0)&rpp=100
There's three "product versions"? What's the difference between them?
Click to expand...
Click to collapse
If you want full T-Mobile firmware with T-Mobile apps, logo and other features, then you need TMB. XAA is for an unlocked Galaxy S8(my S8 has it)
Charkatak said:
If you want full T-Mobile firmware with T-Mobile apps, logo and other features, then you need TMB. XAA is for an unlocked Galaxy S8(my S8 has it)
Click to expand...
Click to collapse
Thanks! I don't want T-Mobile apps or boot logo but I do want WiFi Calling and VoLTE?
Neo3D said:
Thanks! I don't want about T-Mobile apps or boot logo but I do want WiFi Calling and VoLTE?
Click to expand...
Click to collapse
It depends on the model. If you have an unlocked US model, then WiFi Calling, VoLTE and Band 12 are already supported. My model of S8 is G950U1
I just realized that all three versions USA(XAA), USA(TMK), and USA(CSC) of the most recent July 28, 17 version for the S8
http://updato.com/firmware-archive-...1&r=TMK,USC,XAA&v=Nougat(Android+7.0)&rpp=100
point to the same file? I don't understand why?
Charkatak said:
It depends on the model. If you have an unlocked US model, then WiFi Calling, VoLTE and Band 12 are already supported. My model of S8 is G950U1
Click to expand...
Click to collapse
Are WiFi Calling and VoLTE hardware features?
Neo3D said:
Are WiFi Calling and VoLTE hardware features?
Click to expand...
Click to collapse
I think it might be a mix + carrier needs to support and device needs to be whitelisted in their system. Which model do you have or planning to buy?
XAA will contain most US carrier's CSC codes, so this what US unlocked model comes with.
TMB is for T-Mobile, which is the same as sold by T-Mobile.
Neo3D said:
Thanks! I don't want T-Mobile apps or boot logo but I do want WiFi Calling and VoLTE?
Click to expand...
Click to collapse
You need to download the G950U1 firmware. It is the unbranded firmware. It has all the T-Mobile firmware but none of the bloat or boot logos.
Charkatak said:
I think it might be a mix + carrier needs to support and device needs to be whitelisted in their system. Which model do you have or planning to buy?
Click to expand...
Click to collapse
I have a Straight Talk S8 and I'm done with them. I want to use my phone at T-Mobile next. But my phone doesn't have the WiFi Calling feature listed anywhere in settings?
I was think of flashing a Tmobile image?
Neo3D said:
I have a Straight Talk S8 and I'm done with them. I want to use my phone at T-Mobile next. But my phone doesn't have the WiFi Calling feature listed anywhere in settings?
I was think of flashing a Tmobile image?
Click to expand...
Click to collapse
If you put T-Mobile sim card, then go to phone app and access the settings and then check if you see WiFi Calling there. To find out what you CSC is, just download Phone INFO app(Samsung) from play store. The launch the app and swipe to the left to go to CSC section.
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
mweinbach said:
You need to download the G950U1 firmware. It is the unbranded firmware. It has all the T-Mobile firmware but none of the bloat or boot logos.
Click to expand...
Click to collapse
Thanks, I found this site to get the firmware but why does it show three versions USA(XAA), USA(TMK), and USA(CSC) of the most recent July 28, 17 version for the S8
http://updato.com/firmware-archive-s...7.0)&rpp=100
but curiously enough, all three versions point to the same file?
Neo3D said:
Thanks, I found this site to get the firmware but why does it show three versions USA(XAA), USA(TMK), and USA(CSC) of the most recent July 28, 17 version for the S8
http://updato.com/firmware-archive-s...7.0)&rpp=100
but curiously enough, all three versions point to the same file?
Click to expand...
Click to collapse
USA(XAA) is an unlocked version that works with US carriers.
Here is the most simple answer I can give all of you with this. Look at this thread. https://forum.xda-developers.com/tmobile-galaxy-s8/how-to/eng-boot-root-t3608353
Charkatak said:
USA(XAA) is an unlocked version that works with US carriers.
Click to expand...
Click to collapse
Thanks, but why do they list 3 different product versions that all point to the same file? Is there no difference between USA(XAA), USA(TMK), and USA(CSC)?
Neo3D said:
Thanks, but why do they list 3 different product versions that all point to the same file? Is there no difference between USA(XAA), USA(TMK), and USA(CSC)?
Click to expand...
Click to collapse
Right, I had that question myself before, but you have to make sure which model you have and what is the CSC of your phone. Carrier versions should be: G950U, but US unlocked is: G950U1. There is a little difference in XAA and others, but if you really want unlocked that would have CSC codes of most US carriers, then use XAA image. It will allow you to put any US sim card in the phone and it should work.
I would suggest checking out the carrier switching threads here. There are several... One here and at least one other I think in the T-Mobile S8 guides forums section, that walk you through changing the firmware to the US unlocked while keeping carrier features.
Neo3D said:
What's the difference between USA(XAA), USA(TMK), and USA(CSC)?
There's three "product versions"? What's the difference between them?
Click to expand...
Click to collapse
You will need to download the USA(XAA) firmware. That will give you the unbloated version and you will have WiFi calling and volte with T-Mobile. Just type in sm-g930u1 and select the XAA firmware. I have full T-Mobile capabilities with that firmware which is the US Unlocked model.
Make sure to use the regular csc file and NOT the home csc file.

Please Help C9 Pro HK VoLTE not Working :( :(

Samsung C9 Pro Hong Kong VoLTE not Working i updated the software version C9000ZHU1AQG2 because of VoLTE but Still not working any idea to unable VoLTE or Should i Sell out this Phone..?
Same Mine also not working ??
Volte works for me in hk and china traveling. If you are in another region it will not work since csc does not include your regions carriers.
travis82 said:
Volte works for me in hk and china traveling. If you are in another region it will not work since csc does not include your regions carriers.
Click to expand...
Click to collapse
Ohh so this is a problem i had been afraid of this i was going to sell my phone my region is Pakistan but when i put the Lte network sim card on my phone so networks shows 4g 3g 2g Auto connect i want to set 4g only or 3g only but its not i tried *#*#4636#*#* its also not working what should i do do u have any idea about it :crying:
set to auto. all you can do is maybe try to flash your regions csc with odin. Google for directions i will not answer how to do it. still have issues sell/donate your phone to a dev or someone who can give it a good home.

Categories

Resources