Hi all
Didn't want to post in the official devs thread so I thought here would be most appropriate
I fresh installed kdz for 5.02 on my Australian lg g2 d802T with root and twrp. All good.
I tried to install blisspop 3.5 using the instructions
Boot into twrp,
Install bootstack 802 from lg devs
Install ROM
Install gapps
However after all this I have endless boot logo for blisspop.
Anyone have any ideas?
sifun said:
Hi all
Didn't want to post in the official devs thread so I thought here would be most appropriate
I fresh installed kdz for 5.02 on my Australian lg g2 d802T with root and twrp. All good.
I tried to install blisspop 3.5 using the instructions
Boot into twrp,
Install bootstack 802 from lg devs
Install ROM
Install gapps
However after all this I have endless boot logo for blisspop.
Anyone have any ideas?
Click to expand...
Click to collapse
Hmmm you flashed a d802 bootstack correct? Don't you need a special d802T modem? I get a bootloop when I use a d802 modem on my d806 (same device, similar but not identical modem).
I realised had to wipe system and data first. Whoops.
Lg g2 so complicated to flash compared to nexus 5
Related
Okay, so i had a LG G2 Pre-rooted since i bought it and i unrooted it, i updated to kitkat LG UI only to realize that i am more fond of stock KitKat CM11/CarbonROM, so i flashed the d800 ATT LG G2 which(Worked before i updated to kitkat) and now it gives me a binary error while flashing, it simply gives up trying.
Binary issue: 7 [Device must be [d800/gilpa] , your device is [d800].
I'm so confused , is the KitKat Update from LG Screwing things up or?!? How do i fix this?
Thanks, and if this has been posted somewhere else, sorry..
Longstory short: Updated KITKAT OTA, Didn't like it, Downgraded back to JellyBean, Installed TWRP, AOSP don't flash...
EDIT: SOLVED: D800 Flash the updated recovery zip
http://goo.im/devs/OpenRecovery/g2att/openrecovery-twrp-2.7.0.0-d800.zip
ok a little more info you say here:
"Okay, so i had a LG G2 Pre-rooted since i bought it and i unrooted it, i updated to kitkat LG UI only to realize that i am more fond of stock KitKat CM11/CarbonROM, so i flashed the d800 ATT LG G2 which(Worked before i updated to kitkat)"
you said you unrooted and update to kitkat so where are you right what version are you on and are you rooted or not and what d800 g2 are you trying to flash also have you tried flashing to stock jb(4.2.2) rooting and installing recovery then trying to install the rom?
XxZombiePikachu said:
ok a little more info you say here:
"Okay, so i had a LG G2 Pre-rooted since i bought it and i unrooted it, i updated to kitkat LG UI only to realize that i am more fond of stock KitKat CM11/CarbonROM, so i flashed the d800 ATT LG G2 which(Worked before i updated to kitkat)"
you said you unrooted and update to kitkat so where are you right what version are you on and are you rooted or not and what d800 g2 are you trying to flash also have you tried flashing to stock jb(4.2.2) rooting and installing recovery then trying to install the rom?
Click to expand...
Click to collapse
Yes, i have flashed back to jellybean and installed the update, ota 4.4.2, but i want aosp so i downgraded, i rooted using normal method ioroot and then i installed recovery, and when i flash d800 roms it simply doesnt work. Currently unrooted on LG G2 stock 4.4.2.
XxZombiePikachu said:
ok a little more info you say here:
"Okay, so i had a LG G2 Pre-rooted since i bought it and i unrooted it, i updated to kitkat LG UI only to realize that i am more fond of stock KitKat CM11/CarbonROM, so i flashed the d800 ATT LG G2 which(Worked before i updated to kitkat)"
you said you unrooted and update to kitkat so where are you right what version are you on and are you rooted or not and what d800 g2 are you trying to flash also have you tried flashing to stock jb(4.2.2) rooting and installing recovery then trying to install the rom?
Click to expand...
Click to collapse
SOLVED:
I wasn't informed that i needed to flash the TWRP 2.7.0.0 from the custom recovery installer.
I simply flashed this in the recovery and everything works now.
http://goo.im/devs/OpenRecovery/g2att/openrecovery-twrp-2.7.0.0-d800.zip
I have an LG G2 D802. I have TWRP installed on it and was planning to flash CloudyG3 Rom on it but I read that I might not get full performance if I flash CloudyG3 when on JellyBean. So what should I do now? How can I upgrade my phone to KitKat if I don't have stock recovery?
mertcanekiz said:
I have an LG G2 D802. I have TWRP installed on it and was planning to flash CloudyG3 Rom on it but I read that I might not get full performance if I flash CloudyG3 when on JellyBean. So what should I do now? How can I upgrade my phone to KitKat if I don't have stock recovery?
Click to expand...
Click to collapse
Hey
It doesn't matter on which stock firmware or ROM you are, just follow the install instructions properly.
In CloudyG3 thread, at "installing" it says "flash KitKat baseband" this is for users who come from JB based ROMs
Edit: Sorry..read here: http://forum.xda-developers.com/showpost.php?p=52483656&postcount=2507
Follow this tutorial to flash a clean KitKat firmware: http://forum.xda-developers.com/showthread.php?t=2432476 but use this link to download the flash tool http://forum.xda-developers.com/showthread.php?t=2797190 (it might be newer than in the tutorial)
And you can also download the firmware files from here: http://lg-phone-firmware.com/firmware-Lg+G2-Tutti-36.html
I've been wanting to install CloudyG2 v3.3 to my D802 and I figured that I'll have to flash KK bootloader.
Where can I find my current D802 rom version (30a?30b?etc...)? - I understand that I need 30a/30d to install the AutoRec KK bootloader.
Should I event try to find it, or can I just flash the latest one? I'm a little bit confused...
P.S - Yes, I've read the D802 NOOB manual.
Cloudy should work on a LP bootloader too as I have an d802 and was running Cloudy.
I recommend using the LG Mobile Support Tool to upgrade to the latest ROM. Then, use the OneClick 802 recovery and root tool to flash TWRP and Cloudy. This is what I did for my 802.
Hello there!
So i just got an used G2 and i've been trying to install TWRP but i can't get it done.
I tried so many methods including AutoRec and all i get is an error when booting in recovery.
I've seen alot of topics about this but its all old from android 4.4 and i'm running stock 5.0.2.
Even on TWRP website there isn't an option for the D802 model.
Is there any way i can install a custom ROM on the phone? Any fix for that?
use blastagator's twrp... not the official one
search for "blastagator twrp bumped" on lg g2 forums...
although i saw that his download site is down atm... but there is a mirror on dorimanx server too
Thank you for your answer but i just manage to make it work.
Flashed stock KitKat 4.4.2 then followed the steps with the old guides.
I have an old LG G2 device (LG D802T) LTE variant I tested to install Lineage OS 16 on it knowing, it supports only the LG D802 but I still try it and unfortunately it didn't work (good thing I made a backup) do you have any suggestion for me to install any custom rom for my device that could work?
Thanks
Soobin62 said:
I have an old LG G2 device (LG D802T) LTE variant I tested to install Lineage OS 16 on it knowing, it supports only the LG D802 but I still try it and unfortunately it didn't work (good thing I made a backup) do you have any suggestion for me to install any custom rom for my device that could work?
Thanks
Click to expand...
Click to collapse
Problem solved!
Updated my TWRP by flashing the TWRP provided in blastgator
I can now flash the latest Lineage OS just fine.
Any chance you can explain this in more detail? I have the D802T (Australian variant) and haven’t had any success with getting LineageOS installed. Currently running the stock Lollipop build.
I can root the phone via the LG One Click Root tool. But after installing AutoRec for the D802, I can’t get into the OS anymore - it just cycles between the LG logo and “Security Error”.
I’m able to update the TWRP via the Blastigstor zip’s...but once I download the LineageOS nightly zips and try to flash them, they fail at the first step with an ERROR 7 message - unsure if this is because its looking for a D802 and my phone is a D802T.
Any suggestions?