Related
Hey guys
If you're here, I assume you've read the following thread. If you haven't, please do so immediately
http://forum.xda-developers.com/showthread.php?t=1987950
As mentioned in the other thread, this is the consolidated thread for all non-Blade ZTE manufactured devices. Feel free to post any related question. Hope y'all get appropriate responses reasonably quick
Regards
QuantumFoam
Asus TF300T | ZTE Blade
How to install Adreno graphic drivers on Blade3?
Hello,
I just bought ZTE Blade 3, low-budget smartphone. Successfully rooted with famous ICS method by Bin4ry from this forum. There are no recoveries and roms . My only problem is how to install Adreno 2xx graphic drivers for armv7 device from Qualcomm site? To enter stock recovery I use Volume up+Power and after splash screen press Back button. There are options for upgrading, but after file verification zip didn't install, it's intended for ICS upgrades only. I send e-mail to ZTE but no answer so far. Drivers are Adreno 2xx User-mode Android ICS Graphics Driver (ARMv7)) with name Adreno200-AU_LINUX_ANDROID_ICS_CHOCO_CS.04.00.03.06.001.zip. from developer Qualcomm site, section tools and resorces.
Please help, I assume that must be done with some adb commands but I dont know how...
holocen said:
Hello,
I just bought ZTE Blade 3, low-budget smartphone. Successfully rooted with famous ICS method by Bin4ry from this forum. There are no recoveries and roms . My only problem is how to install Adreno 2xx graphic drivers for armv7 device from Qualcomm site? To enter stock recovery I use Volume up+Power and after splash screen press Back button. There are options for upgrading, but after file verification zip didn't install, it's intended for ICS upgrades only. I send e-mail to ZTE but no answer so far. Drivers are Adreno 2xx User-mode Android ICS Graphics Driver (ARMv7)) with name Adreno200-AU_LINUX_ANDROID_ICS_CHOCO_CS.04.00.03.06.001.zip. from developer Qualcomm site, section tools and resorces.
Please help, I assume that must be done with some adb commands but I dont know how...
Click to expand...
Click to collapse
You cannot download the drivers from the Qualcomm site and expect them to work universally. They have to be individually modded for each device by a developer, then flashed
Asus TF300T | ZTE Blade
Clockworkmode for Blade 3 ICS
Recommend me Clockworkmode for Blade 3 ICS? Can anything work without modding?
holocen said:
Recommend me Clockworkmode for Blade 3 ICS? Can anything work without modding?
Click to expand...
Click to collapse
I don't know about the CWM project for the Blade 3
And yes. Some software like Beats Audio can be flashed universally without Modding
Asus TF300T | ZTE Blade
[Q] ZTE V6500 Etisalat smartphone (nova 3.5) rooting
--------------------------------------------------------------------------------
dear all ,
i just bought the ZTE nova 3.5 known as etisalat smart phone here in egypt ...
i tried to root it in every way possible with no use ... kindly if fellow developers can help us through the rooting process .. it would be of a great pleasure to alot of egyptians here .... thanks in advance .... i am willing to try whatever it is to succsesfully root this phone
Mustapha.Soliman said:
[Q] ZTE V6500 Etisalat smartphone (nova 3.5) rooting
--------------------------------------------------------------------------------
dear all ,
i just bought the ZTE nova 3.5 known as etisalat smart phone here in egypt ...
i tried to root it in every way possible with no use ... kindly if fellow developers can help us through the rooting process .. it would be of a great pleasure to alot of egyptians here .... thanks in advance .... i am willing to try whatever it is to succsesfully root this phone
Click to expand...
Click to collapse
What all did you try
Asus TF300T | ZTE Blade
Root for ZTE Nova
Mustafa, this is solution for your problem:
http://forum.xda-developers.com/showthread.php?t=1886460
Your android is ICS, why do you want ROM?
holocen
Root for ZTE Nova
Mustafa, this is solution for your problem:
http://forum.xda-developers.com/show....php?t=1886460
Your android is ICS, why do you want ROM?
16TH NOVEMBER 2012 11:34 PM
QuantumFoam
Quote:
Originally Posted by Mustapha.Soliman
[Q] ZTE V6500 Etisalat smartphone (nova 3.5) rooting
--------------------------------------------------------------------------------
dear all ,
i just bought the ZTE nova 3.5 known as etisalat smart phone here in egypt ...
i tried to root it in every way possible with no use ... kindly if fellow developers can help us through the rooting process .. it would be of a great pleasure to alot of egyptians here .... thanks in advance .... i am willing to try whatever it is to succsesfully root this phone
What all did you try
Click to expand...
Click to collapse
dear all ,
first of all this mobile runs on android 2.3.6 (GB) not (ICS)
i have tried doom lord (zergrush ) , superone click , z4root , unlock root
i have tried some manual commands
all with no use , if any body can help please
thanks in advance
Gingerbread root
Sorry, my mistake, try this:
http://forum.xda-developers.com/showthread.php?t=1697248
holocen
Gingerbread root
Sorry, my mistake, try this:
http://forum.xda-developers.com/show....php?t=1697248
Click to expand...
Click to collapse
didnt work also ... attached a print screen of the process ... thanks in advance
it rebooted twice .. and thats a good step .. because all other roots the phone didnt respond at all ...
but when i checked .. the phone was not rooted also
i tried it and didn't work
can anybody help please
How to root and flash coustom ROM for ZTE X876
Hi everybody,
Could anyone help me how to root and flash custom rom for ZTE X876 .my current system is 2.1 and NOT ROOTED.
I try to root it with z4,universal androot, unlock root, super one click,unluckily not successful.
I want to root and flash custom for my ZTE X876.Plz someone point me out to the right direction.
Thanks
hi tharpu try this site i think u will find what u want h
ttp://code.google.com/p/zte-x876-roms/downloads/list
ZTE BLade 2
So, last I bought me a ZTE Blade 2. I am very happy with this phone, and it is my first android phone. I tried to root my phone with a guide on the modaco forums. After trying a few times, it worked perfectly. This was also the first time I rooted a smartphone. Then I wanted to flash a new rom, because someone told me it was a great rom (cm9 or something like that. I googled it and found a rom for the "ZTE Blade 2". I tried to flash the rom, but it failed. Now my homebutton doesn't work anymore and I can't receive phone calls, but I can call other persons.
By googeling what was wrong I found out that the rom was for the ZTE crescent/ San Fransico II. It seems that the Crescent is also reffered as the blade 2 since it is the succesor of the san fransico I. In the beginning I was confused, butr now I know these 2 phones are completely diffrent.
After I found the problem why the rom would not flash, I want searching for a solution. Seems I could repair my ZTE by installing a stock rom. I can't find a stock rom and poeple tell me there is no rom availabe for the Blade 2, not even on the ZTE site itself. I also found that I could repair it by flashing my back up. but while i was formatting my phone in the CWM recovery I also formatted my SD card, so I lost my back up to. Now my question is, can I install someone elses back up file? and if that is possible, would someone who ownes this phone be so kind to give me a back up? If there are other solutions, I would like to know, every idea is welcome!
I bought my phone in Belgium in BASE store.
Kind regards challengere.
Thanks in advance!
Has there been any root for the ZTE engage? The phone is fairly new, and i tried searching everywhere and failed to find any possible root. please and thank you.
Can someone make tutorial about rooting and backup for ZTE Blade 3?
Look here...
http://zteblade3.webs.com/
Hi everyone,
i have two questions...
i have a zte racer and i'm currently using the universal androot app to root it, but it is a temporary root, is there any way i can root permanently my racer?
other question: i'm planing to buy a ZTE skate acqua (dubbed as TMN smart a15 here in Portugal) is it good? my main worry is the screen response, is it responsive?
Q&A for Micromax A77 Canvas Juice [All in one thread] [CWM, ROM, Root]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Micromax A77 Canvas Juice [All in one thread] [CWM, ROM, Root]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
<<urgent help needed>>
i accidently deleted build.prop file and rebooted...
now my phone i stuck on logo..
i am the owner of micromax canvas a77(rooted)
and
when i try to connect my phone to PC it says MTK65xx drivers not installed
i also tried installing these drivers but the phone didn't connect
probably because my USB debugging was not enabled..
PLZZZZZZZZZZZ HELP ME
I WANT MY PHONE BACK ((((
plz tell me appropriate steps to b taken ASAP !
thanks in advance
YOU CAN ALSO CONTACT ME ON <[email protected]>
can all owners of micromax canvas series especially a77 let me know about how to enable navigation bar in my phone, i had tried a lot by gravity box but still i cannot get it.
what i tried
1> tried enabling navbar through gravity box in my friends karbonn titanium s5 and got it
2> tried enabling it in my xposed modified rom but was unable get it
3> flashed the fresh stock rom installed xposed and gravity box rebooted enabled navbar but still cant get it.
any kind of help will be appreciated
thanks for paying attention...
---------- Post added at 06:07 PM ---------- Previous post was at 05:56 PM ----------
Rishav24397 said:
i accidently deleted build.prop file and rebooted...
now my phone i stuck on logo..
i am the owner of micromax canvas a77(rooted)
and
when i try to connect my phone to PC it says MTK65xx drivers not installed
i also tried installing these drivers but the phone didn't connect
probably because my USB debugging was not enabled..
PLZZZZZZZZZZZ HELP ME
I WANT MY PHONE BACK ((((
plz tell me appropriate steps to b taken ASAP !
thanks in advance
YOU CAN ALSO CONTACT ME ON <[email protected]>
Click to expand...
Click to collapse
i flashed my phone just a day before from now and even i got that problem
solution- just search around google with proper driver installation you will get it
best of luck
I also tried gravity box, and build.prop method
i think there must be something in framework res, that needs tweaking...
and experienced user here?
Unbrick micromax A177
My phone has been bricked ...Not turning on..just the logo stays..Plz help me to solve the problem..
Just tried steps from..
Problem solved...Got recovered
I bricked my micromax a177.need help urgent!!!!
hi!
i had my phone rooted for almost a year with CWM recovery installed. i also have nandroid backup.
my phone was not conneting to wifi so i decided to factory reset it. i did factory rest in the simple way(settings->bacup&reset->factory reset)but my phone is stuck in bootloop. and it wont go in recovery mode. plz help....its urgent i have no idea what to do as it wont go to recovery mode
and sorry for bad english.
plzzzzzzzzzzzzzzzzz!!!!!!!!!!
can i use cyanogen mod on my micromax a77
Q&A for [ROM][CleanKAT][V4.0][A120]Canvas 2 colours
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CleanKAT][V4.0][A120]Canvas 2 colours. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
can it be flashed over darkL v1.5
i was initialy using jelly bean.....and recently i flashed the DarkL v1.5(not Wiko)....can i flash this cleanKAT v4-0 directly.....
I like the old Dolby better.
Sir Umang, great job. But I have one request. Can you please make a flashable zip of the old dolby? I really liked it better than the new one. Thank you
Micromax Canvas XL2 A109
plz upload rooting,custom rom method of micromax canvas xl2
question
can i install it mmx A120 having stock kitkat and 8gb internal mass storage
cleankat fota update
Sir
I've been recently using cleankat 3.0 for my canvas 2 colours.And i wish to recieve the updates through fota.Will you please tell me how to do it.
Internal storage card can't be mounted?
Sent from my RAINBOW using XDA Free mobile app
mmx_in_06
can i flash this rom in mmx_in_06 base. please reply. also provide stock recovery for this base.
wont boot
I am a user or your cleankat 3.0A .I am using canvas 2 colours .I want to flash DarkL 1.6 .I installed the wiko zip file using the custom recovery .But it wont boot up it is stuck at the screen where "DarkL" is displayed i waited upto 15 minutes but nothing happened.I tried the same with the darkl fota and cleankat wiko, but the result is same.I restored to cleankat 3.0a.Pls answer me how to install the Dark L 1.6.
Stuck at cleankat boot..
Sir, I have Micromax A120 8GB model with stock kitkat 4.4.2. I rooted it and tried to flash cleankat v4.0 and then wiped only the data as instucted before flashing. After rebooting the screen is stuck at the boot screen only displaying "CleanKAT". Does this mean my phone is bricked? I tried to restore a backup but not succeeding. Please help me.... Did this happen because it was supposed to be used on a stock jellybean or fota kitkat A120? .....feeling nervous
Lollipop port from a106 (unite 2)
Umangleekha sir! can u pls port unite 2's lollipop rom to our device: http://forum.xda-developers.com/and...op-unite-2-t3054537/post59436355#post59436355
i flash cleankat v4 but otg not work??
any otg fix patch availble ?
I have rooted and installed CTR recovery on my a120 8gb variant running stock kitkat...
So, can i directly flash the CleanKAT rom
Or anything else need before flashing...
Sent from my Micromax A120 using XDA Free mobile app
how to remove dolby digital form cleankat rom?
i would also like to know how to open usb mass storage on this rom
can i flash cleankat v4.1 over wiko v8
Serious error
When i flash this rom my iemi no is gone both the time s i tried!! seriously restoring is very tough!!!
Flash this on my blu studio 5.0 c HD (a120 clone ) . and only getting 2g . not 3g data speeds . tried setting it to 3g only and when I do that I get no reception and no data . any ideas .?
Sent from my BLU STUDIO 5.0 C HD using XDA Free mobile app
I have ordered Redmi 2 Prime for gifting it to my mother,i wanted to ask about flashing of custom romson this device.1.At first in order to flash any custom rom do i have to update it to miui 7 first?2.Which is most stable aosp or cmrom on forum? and what are bugs assosiated with it?There are lot of fix camera etc. threads on this forum what do i have to flash afterflashing rom?3.And can i restore stock directly through twrp backup ?or i have to flash stock using fastboot method.
If there is existing guide which can help me please do share link.
http://forum.xda-developers.com/redmi-2/how-to/index-xiaomi-redmi-2-t3307136
1. No, you just need a Custom Recovery .
Get TWRP here
http://en.miui.com/thread-114090-1-1.html
2. Try CM 13 , it's very good
You'll get it here , no bugs
http://en.miui.com/thread-289332-1-1.html
3. Not necessarily PC is required .. you can do it simply Via Twrp too ...refer to first link given , it's explained there
I have a device named Colors K 15 which is basically a Mediatek 6582 device. Below are the few screenshots of the device details.
I wanted to know whether it is compatible with the custom ROMs available for Wiko Rainbow and Micromax A120 ?
Ps. I have already tried to flash wiko v13 ROM but the device got bricked.
Sorry bro but its not the clone one !
Clone one means same camera,internal storage,expand storage and everything same like the original one !
And unfortuntely u are on a wrong site to ask it !
Here no body will help u until they had some own business !
I have also asked about same question on canvas aq5000 But no one answered !
Its better to use google than this site to ask !