Got a N7 2012 runing 5.1 - finally got fed up with it being so slow as almost unuseable so decided to install CM12 ... and am stuck in a boot loop.
I followed the instructions I found (I cant post the link) so I've listed them below:
Deploy ROM image
adb devices
adb push YOURROMZIP.zip /sdcard/
adb reboot bootloader
fastboot devices
fastboot oem unlock
cd Download
#or whenever you have downloaded files
fastboot flash recovery your_recovery_image.img
Choose Recovery
Now use your volume buttons to change selected item from the Menu and pick "Recovery mode"*and select it with Power button.
Right now ClockworkMod recovery should start!
Now with the same buttons navigate in recovery and select:
1. backup and restore
2. wipe data/factory reset
3. install zip from sdcard
4. choose zip from sdcard (you should find it in folder named "0", not in the root of sdcard!)
5. reboot system now
Cyanogen Mod should be installed!
did a full wipe at fastboot oem unlock .. then realised i'd have to re-push the ROM as I don't have an sdcard ... so I did that.
Managed to flash TWERP onto it (rather than CW) and got it to boot into Recovery Mode but ... the Recovery Mode and Restart Bootloader are in RED and don't do anything when I tap them.
When I try to power off and back on it gets stuck in the boot loop...
Google screen show with a padlock at the bottom, goes away and then shows up again
Teamwin logo shows up
says 'Running OpenRecovery script'
things then happen too quicly for me to track but it seems there are a list of red error messages like:
E: unable to mount data and could not find crypt footer
I'm running Ubuntu 14.04 and the device doesnt appear i the list when I type
adb devices
fastboot devices
Can anyone tell me what to do to get CM12 on the m/c and working???
btw, managed to break out of the bootloop but it will just start again when turned off and on.
Thanks in advance.
From what you said, you're not in recovery mode. You're in bootloader mode.
In bootloader mode device doesn't support touchscreen, you need to use volume up/down and power to select option.
To get out of bootloop and go to recovery:
1. Power down your device (hold power for few seconds)
2. Boot into recovery mode (hold Volume Down + Power)
3. Navigate to recovery (Using Vol up/down and selecting option by pressing power button)
So my soft keys doesnt work after last update, and there is a thread about that but people there know their way around all those softwares and ROMs and all that really good, and this should be thread to help noobs.
So I would really appreciate some good person to write and explain here all steps, with all needed links. I have never installed something on my S4 via Odin, or rooted it, or "flashed" custom or stock ROM (dont know what flash means). Thx very much
Joku1981 said:
I explain how I did it. Step by step:
1. Download and flash this ROM (via TWRP): HERE (follow the steps of the custom ROM thread to flash it correctly).
This ROM will force a new firmware to be flashed to the IC, firmware 0x1c, which works with the newer updates (at least with OJ2 on mine)
2. After you installed this ROM, go to the *#2663# screen and check to make sure it says 0x1c on 'Part's Touch key FW version'. Continue step 3.
3. Boot to recovery and choose (via TWRP): Wipe --> Advanced Wipe --> Dalvik, System, Data, Internal Storage and Cache. Then Swipe.
4. Reboot in DOWNLOAD MODE and flash via ODIN normally the latest Lollipop to your device (OJ2 on mine)
5. Wait the booting. Done. Signal and soft keys working again.
All credits go to @andonsky & @dafonehacker (not to me).
Click to expand...
Click to collapse
so I flashed TWRP via odin ( I followed instructions found online)
then i started following instructions on thread you gave me link to, I did updated modem and bootloger (2.Update your Modem & Bootloader to the Latest Lollipop Ones vby following this Guide)
then I copied that ROM (albe95) on my phone and shut it down.
next step is boot recovery and with twrp go first to wipe then to install. and this is where I have stuck. there is no install, and there is wipe but it says wipe cache and wipe something else. there is no difference between recovery mode i had before flashing twrp and now when i flashed twrp. the only difference is that now when i go for recovery boot (press power, vol, home) , in the left up corner there is line of blue letters, then underneath line of yellow letters (somethng says Sandroid) and then line of red letters (it says recovery something). before I flashed twrp there was just in upper left corner of the screen small blue letters saying recovery boot.
and then I enter recovery boot mode and it says like this:
Android system recovery 3e
LRX22C.I9505XXUHOA7
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe data/factory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
Enable cp logging
Disable pc logging
and then all the way down:
#MANUAL MODE#
appling multi-CSC...
applied the CSC-code : VIP
Succesfully applied multi-CSC
help anyone I am stuck
Aedan2 said:
so I flashed TWRP via odin ( I followed instructions found online)
then i started following instructions on thread you gave me link to, I did updated modem and bootloger (2.Update your Modem & Bootloader to the Latest Lollipop Ones vby following this Guide)
then I copied that ROM (albe95) on my phone and shut it down.
next step is boot recovery and with twrp go first to wipe then to install. and this is where I have stuck. there is no install, and there is wipe but it says wipe cache and wipe something else. there is no difference between recovery mode i had before flashing twrp and now when i flashed twrp. the only difference is that now when i go for recovery boot (press power, vol, home) , in the left up corner there is line of blue letters, then underneath line of yellow letters (somethng says Sandroid) and then line of red letters (it says recovery something). before I flashed twrp there was just in upper left corner of the screen small blue letters saying recovery boot.
and then I enter recovery boot mode and it says like this:
Android system recovery 3e
LRX22C.I9505XXUHOA7
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe data/factory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
Enable cp logging
Disable pc logging
and then all the way down:
#MANUAL MODE#
appling multi-CSC...
applied the CSC-code : VIP
Succesfully applied multi-CSC
help anyone I am stuck
Click to expand...
Click to collapse
Hi,
Looking at that list I would guess that the TWPR didnt flash correctly as that is the stock recovery options.
Try flashing it again via Odin, if it still doesnt work, maybe try rooting the phone with CF Auto root flashed via Odin, then flash TWPR.
cheers
Aedan2 said:
so I flashed TWRP via odin ( I followed instructions found online)
then i started following instructions on thread you gave me link to, I did updated modem and bootloger (2.Update your Modem & Bootloader to the Latest Lollipop Ones vby following this Guide)
then I copied that ROM (albe95) on my phone and shut it down.
next step is boot recovery and with twrp go first to wipe then to install. and this is where I have stuck. there is no install, and there is wipe but it says wipe cache and wipe something else. there is no difference between recovery mode i had before flashing twrp and now when i flashed twrp. the only difference is that now when i go for recovery boot (press power, vol, home) , in the left up corner there is line of blue letters, then underneath line of yellow letters (somethng says Sandroid) and then line of red letters (it says recovery something). before I flashed twrp there was just in upper left corner of the screen small blue letters saying recovery boot.
and then I enter recovery boot mode and it says like this:
Android system recovery 3e
LRX22C.I9505XXUHOA7
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe data/factory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
Enable cp logging
Disable pc logging
and then all the way down:
#MANUAL MODE#
appling multi-CSC...
applied the CSC-code : VIP
Succesfully applied multi-CSC
help anyone I am stuck
Click to expand...
Click to collapse
Uncheck auto-reboot in Odin before flashing TWRP.
hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.
No one knows?
kratos0605 said:
hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.
Click to expand...
Click to collapse
What is the model number of your Note 4? When you are at the "no command" screen, try holding the volume up button and then press the power button to take you to recovery. I'd that doesn't work try holding the power button and tapping the volume up button quickly and release all buttons and see if it allows yoj to access recovery. I'd these do not work keep trying different button combinations. I'd you still cannot access the recovery menu you may have to Odin the factory firmware and start over. Let me know what happens.
Sent from my Nexus 6 using XDA-Developers mobile app
none of those button combinations work. I will install stock firmware on it again and see if that fixes the recovery.
I had this problem in the past, I think the problem was that when I was installing TWRP via Odin that I had not powered off the phone so it looked like it installed but actually didn't, try taking out the battery and then boot into recovery or download mode whatever it is that is used for Odin and install again
kratos0605 said:
none of those button combinations work. I will install stock firmware on it again and see if that fixes the recovery.
Click to expand...
Click to collapse
If you cannot get into recovery with any button combination boot to download mode and use Odin to flash all 4 files of the factory firmware. That will give you a fresh start. Let me know how it goes.
Sent from my Nexus 6 using XDA-Developers mobile app
Same here
After holding volume up+middle button+power bar
I get into recovery mode but right after recovery mode it goes into “installing system update….” and then “No command” shows up and after that I get the following message and options:
Android system recovery
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe/data/factory reset
wipe cache partition
reboot to bootloader
power down
View recovery logs
Enable cp logging
Disable cp logging
and at the bottom in yellow it says;
# MANUAL MODE #
— Appling Multi-CSC…
Applied the CSC-code : GLW
Successfully applied multi-CSC.
Any sort of help would be appreciated, thank you.
amk58 said:
Same here
After holding volume up+middle button+power bar
I get into recovery mode but right after recovery mode it goes into â??installing system updateâ?¦.â? and then â??No commandâ? shows up and after that I get the following message and options:
Android system recovery
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe/data/factory reset
wipe cache partition
reboot to bootloader
power down
View recovery logs
Enable cp logging
Disable cp logging
and at the bottom in yellow it says;
# MANUAL MODE #
â?? Appling Multi-CSCâ?¦
Applied the CSC-code : GLW
Successfully applied multi-CSC.
Any sort of help would be appreciated, thank you.
Click to expand...
Click to collapse
Use the VOLUME UP/DOWN BUTTONS to scroll to WIPE DATA/FACTORY RESET and let it do its thing. When it's done select REBOOT SYSTEM NOW.
Tell me what that does.
fast69mopar said:
Use the VOLUME UP/DOWN BUTTONS to scroll to WIPE DATA/FACTORY RESET and let it do its thing. When it's done select REBOOT SYSTEM NOW.
Tell me what that does.
Click to expand...
Click to collapse
but this will erase all my data from the phone
Yes it will but it is the most likely way out of your bootloop. Before you wipe, connect your device to your PC and boot to recovery. Once your PC recognizes your device internal storage, transfer everything that you can think of.
Sent from my Nexus 6 using XDA-Developers mobile app
fast69mopar said:
Yes it will but it is the most likely way out of your bootloop. Before you wipe, connect your device to your PC and boot to recovery. Once your PC recognizes your device internal storage, transfer everything that you can think of.
Click to expand...
Click to collapse
I'm not in bootloop
My phone is working normally.
I'm trying to root my note 4 N910H (Android 6.0.1 Marshmallow) device
I flashed TWRP recovery using Odin
now I need to boot into TWRP recovery so I can to Flash SuperSu.zip downloaded in my device
what is happening after holding volume up+middle button+power bar
I should expect a menu with install option so I can flash the SuperSUfile in the device internal memory, instead this is happening:
it goes into “installing system update….” and then “No command” shows up and after that I get the following message and options:
Android system recovery
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
apply update from cache
wipe/data/factory reset
wipe cache partition
reboot to bootloader
power down
View recovery logs
Enable cp logging
Disable cp logging
and at the bottom in yellow it says;
# MANUAL MODE #
— Appling Multi-CSC…
Applied the CSC-code : GLW
Successfully applied multi-CSC.
Click to expand...
Click to collapse
If i choose reboot system, the phone will work fine, but I need a way to access TWRP recovery so I can to Flash SuperSu
amk58 said:
I'm not in bootloop
My phone is working normally.
I'm trying to root my note 4 N910H (Android 6.0.1 Marshmallow) device
I flashed TWRP recovery using Odin
now I need to boot into TWRP recovery so I can to Flash SuperSu.zip downloaded in my device
what is happening after holding volume up+middle button+power bar
I should expect a menu with install option so I can flash the SuperSUfile in the device internal memory, instead this is happening:
If i choose reboot system, the phone will work fine, but I need a way to access TWRP recovery so I can to Flash SuperSu
Click to expand...
Click to collapse
That looks like TWRP didn't stick when you flashed it using Odin. Try a different version of Odin and flash TWRP.
Sent from my Nexus 6 using XDA-Developers mobile app
kratos0605 said:
hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.
Click to expand...
Click to collapse
So idk if you've gotten it fixed, but what worked for me was: I had been turning on the phone after odin did its thing, and that caused the oem recovery to reinstall itself. So instead of letting odin auto boot be ready to push the volume up button to put it into twrp recovery. I had to remove my battery to keep it from booting fully.
We need to try another time flash. Conditions - old Odin 3.06, configured to remove reboot.
swhockey347 said:
So idk if you've gotten it fixed, but what worked for me was: I had been turning on the phone after odin did its thing, and that caused the oem recovery to reinstall itself. So instead of letting odin auto boot be ready to push the volume up button to put it into twrp recovery. I had to remove my battery to keep it from booting fully.
Click to expand...
Click to collapse
thanks you saved me lot of time today !!!
Thanks - this helped me too
i have same problem
my phone is samsung j2lte
have you try untick /uncheck the "auto reboot" option on odin app. instead reboot manually after flashing twrp??
my problem not solved either
Thank you. This helped me too.
kratos0605 said:
hey guys! first post but I have been lurking here and there before registering.
Sorry if this is the wrong section to post this in. I am trying to root my note 4 and I installed TWRP using Odin. Now when I go into recovery mode to flash SuperSu, it says "no command" with the android guy laying on the floor. I tried the factory reset option and I installed TWRP again but still same problem. I can still load my phone and use it as usual but now I can't go into recovery mode with TWRP and flash supersu to root it. Anyone know how I can fix this problem? Any help would be appreciated.
Click to expand...
Click to collapse
In ODIN go to 'options' and uncheck 'auto-reboot', then flash TWRP. When it's done, it won't reboot, just pull the battery for several seconds, reinsert it and boot into TWRP Recovery.
Enjoy!
When I try to flash any thing it gets stuck on boot.img
I wiped my phone's Dalvik / ART Cache, Cache, Data, System. And wanted to install CypherOS Pie. And boot, oem, odm, root, product, recovery, sideload, sdcard are empty (I checked through twrp file manager). Everytime my phone boot, it boots to
"Your device has been unlocked and cant be trusted".
I wait until it boots and I see
"ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (Recovery image)
Error NO: 2 (load failed).
same error happens when i try to boot to erecovery (by holding VOL UP 3 seconds)
I can enter TWRP by VOL UP, VOL DOWN, POWER keys
And I don't find a way to install Android. I tried every method I know. Can someone tell me how to make my phone working again? Please
PHONE and FRP are unlocked
EMUI 8, WAS-LX1C432
Hi,
I'm stuck in a boot loop of my OnePlus 5 (A5000, product name msm8998 - msm UFS) with stock rom. Also stock recovery and bootloader locked, secure boot: yes
Already tried:
- Button combos (Volume up/down while starting, forced restart (vol up+power))
- In Stock Recovery Mode i can sideload. Tried to sideload latest OTA from OP5 website, success, restart, still bootloop (adb devices only shows device in sideload mode)
- Fastboot mode does not list device (adb)
- Tried to wipe cache / reset system settings
The sad thing is that I can see my folders / data if "install from internal storage" is chosen, so I know it's still present.
Any hints?
Is there any possibility to get my data off the phone with OnePlus stock recovery and/or sideload? (adb pull throws "error: closed")
Thank you all for helping!
No ideas? That seems bad news for me as all data will be lost in that case.
Anybody got some hints where you could point me to find additional ways I could try?