Database Users

SGH-I337 Softbricked Solved

If you soft-bricked your SGH-I337 and Odin Fails Authentication you are probably on MF3 Firmware and need to download the MF3 Tar Files and Odin 3.07
Insert the files into Odin like in the picture and run it. Should finish and reboot your phone. Thanks to everyone on XDA who figured this out.

My I337 was stuck on "Unauthorized Software" message. Every time I ran an Odin process I would get a failure. I was not able to make any progress until I came across this thread. I followed these instructions and made no progress. I added a "PIT" file I found on an earlier thread to this process. Odin still failed, but now I am stuck at "Firmware upgrade encountered an issue" message. I view this as some kind of progress! It suggest using Kies to proceed with recovery. Unfortunately Kies does not recognize the device. I am still getting Odin failures (see list below).
I think I am taking in for service, unless some one has a suggestion.
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sbl1.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> sbl2.mbn
<ID:0/011> sbl3.mbn
<ID:0/011> rpm.mbn
<ID:0/011> aboot.mbn
<ID:0/011> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!

Try to flash with Odin but with out bootloader.
Sent from my SAMSUNG-SM-G900A using XDA Premium HD app

[Q] every flash assumed fails with this message from odin

my phone SM N9005 was rooted I unrooted with app and tried to do factory reset
tried to flash cmw twrp nothing worked i was unable to enter recovery after first try of flashing it
i couldnt flash a rom till now
please help me
and now theres now system installed at th moment
was looking for a solution the whole night here
last try that shows up
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N900XXUCMK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N900XXUCMK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_N900SERCMK1_HOME_SER.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N900XXUCMK2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N900AUCUBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N900AUCUBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N900AUCUBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_N900AATTBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
thanks for help

Is reactivation lock off?
Did you know which os version you have before trying to flash this?

hey_joe said:
Is reactivation lock off?
Did you know which os version you have before trying to flash this?
Click to expand...
Click to collapse
Yes reactivation lock is off.
It was android 4.42 ota update before I rooted with auto root.
thanks for such a fast reply

KungfuSh said:
Yes reactivation lock is off.
It was android 4.42 ota update before I rooted with auto root.
thanks for such a fast reply
Click to expand...
Click to collapse
I checked the AP/PDA file you were trying to flash and it's apparently a 4.3 firmware which if you had a 4.4 before will not be possible to downgrade to a 4.3 firmware at the moment. So you have to flash a 4.4 firmware/roms.

KungfuSh said:
...
BL_N900AUCUBMI9_1625098_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
...
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
thanks for help
Click to expand...
Click to collapse
You only needed to show the above - you seem to be currently on the latest bootloader (from 4.4.2) and you are trying to write (at least parts of) an older bootloader sequence - that is not possible, at least not on N9005. Basically on N9005 once you went for the 4.4.2 bootloader you can only write a 4.4.2 ROM, read more around the sub-forums since there are hundreds of posts more or less similar to yours.
Also I find a little strange that you say you are on N9005 and you are trying to write stuff for N900A, and very strange that you are still surprised it does not work.

Possibly Soft-Bricked my Device, willing to try anything!

Basically my device is the Samsung Galaxy S7 Edge, obviously. SM-G935A. It is the AT&T version, and I believe I may have soft bricked it. I played with roots and never successfully rooted it before, but now it is most likely soft bricked. I turned off the device, turned it back on, and I got stuck on a frozen AT&T boot logo. I was able to get into Recovery Mode later on and I have factory reset it several times, but each time I do, it loads directly back into Recovery mode. I have tried several different versions of ODIN, and several different ROM's and Firmware's with each version of ODIN and I get errors every single time.
At this point, I'm willing to try anything, so if you suggest something to me, I will give it a shot because I just want my phone back.
Thanks in advance, I appreciate anything.

You need to start by flashing your original rom with odin, then follow tutorials on xda on methods to root your model.

Deano89 said:
You need to start by flashing your original rom with odin, then follow tutorials on xda on methods to root your model.
Click to expand...
Click to collapse
What exactly do you mean by my original rom? If you could provide a link I would really appreciate it.
EDIT: I found an original AT&T rom, and it would not flash correctly. The log is below.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone: SW REV CHECK FAIL : [aboot]Fused 4 > Binary 2 [1] eMMC write fail: aboot

Same issue here man, i been trying everything with no success. My phone keeps rebooting from the samsung logo. Nothing has been successfully flashed either.

If anyone has any firmware or ROM's or versions of ODIN you could suggest. Original firmware, stock ROM's, custom ROM's, unlocked ones, whatever, please post them and I will try them.

Try flashing all the ROM files apart from BL
Just AP, CP, CSC

*Detection* said:
Try flashing all the ROM files apart from BL
Just AP, CP, CSC
Click to expand...
Click to collapse
I believe I may have tried that last night, however, I didn't save the log. It got me a bit farther, I believe. I will try it again today and post the log this time.
Thanks for the response!

Download Samsung Kies 3 from here:
http://www.samsung.com/uk/support/usefulsoftware/KIES/
Then once you downloaded/installed kies you put your device in Download mode.
In Kies 3 go to the top menu bar and select Tools > Firmware upgrade and initialization.
It will prompt you to enter your device's model name and in the next window it will ask for your Serialnumber (which is on the back of your device (rip dbrand skin) )
After that a download will start in Kies 3 and now you just have to wait for it to download and install.
Good luck!

LennARTpas said:
Download Samsung Kies 3 from here:
http://www.samsung.com/uk/support/usefulsoftware/KIES/
Then once you downloaded/installed kies you put your device in Download mode.
In Kies 3 go to the top menu bar and select Tools > Firmware upgrade and initialization.
It will prompt you to enter your device's model name and in the next window it will ask for your Serialnumber (which is on the back of your device (rip dbrand skin) )
After that a download will start in Kies 3 and now you just have to wait for it to download and install.
Good luck!
Click to expand...
Click to collapse
Will give this a shot now that I know how to use Kies. I installed it last night while I was trying to fix it, and I thought it was just a different driver haha.

Pyroshox said:
Will give this a shot now that I know how to use Kies. I installed it last night while I was trying to fix it, and I thought it was just a different driver haha.
Click to expand...
Click to collapse
Let me know if you fixed the issue you're having!

Pyroshox said:
What exactly do you mean by my original rom? If you could provide a link I would really appreciate it.
EDIT: I found an original AT&T rom, and it would not flash correctly. The log is below.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone: SW REV CHECK FAIL : [aboot]Fused 4 > Binary 2 [1] eMMC write fail: aboot
Click to expand...
Click to collapse
Download the newest Odin version.
Make sure the re-partition mode is OFF.
Try again with the base firmware from Sammobile

@LennARTpas - I am trying this on a separate computer, but I am getting errors that my device is not supported and that the S/N is incorrect even though I have typed it in several times. Any assistance would be greatly appreciated.
@roba93 - I will be sure to try your method once I am back in the environment to do so.

Pyroshox said:
@LennARTpas - I am trying this on a separate computer, but I am getting errors that my device is not supported and that the S/N is incorrect even though I have typed it in several times. Any assistance would be greatly appreciated.
@roba93 - I will be sure to try your method once I am back in the environment to do so.
Click to expand...
Click to collapse
here!

@LennARTpas - I tried your method, however, the same issue occurred. I got several recurring errors telling me that my device was not recognized by Kies, and when I attempted to submit the S/N, it told me it was incorrect.
@roba93 - I tried your method as well, however, SamMobile does not offer firmware for SM-G935A, so I tried the unlocked version, SM-G935U, and it gave me this log below. If I did not use the correct firmware, if you could point me in the direction of which to use that would be greatly appreciated. I feel as though I'm coming off like a needy n00b, and I don't mean to in any way for future reference.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT: @*Detection* - I tried your method where I didn't use the BL in ODIN, and I got this log.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Pyroshox said:
@LennARTpas - I tried your method, however, the same issue occurred. I got several recurring errors telling me that my device was not recognized by Kies, and when I attempted to submit the S/N, it told me it was incorrect.
@roba93 - I tried your method as well, however, SamMobile does not offer firmware for SM-G935A, so I tried the unlocked version, SM-G935U, and it gave me this log below. If I did not use the correct firmware, if you could point me in the direction of which to use that would be greatly appreciated. I feel as though I'm coming off like a needy n00b, and I don't mean to in any way for future reference.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT: @*Detection* - I tried your method where I didn't use the BL in ODIN, and I got this log.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You said that you are using the G935A.
Please try the following firmware: http://downloadmirror.co/1Ksx/G935AUCS4API2.zip
Hope this helps

roba93 said:
You said that you are using the G935A.
Please try the following firmware: http://downloadmirror.co/1Ksx/G935AUCS4API2.zip
Hope this helps
Click to expand...
Click to collapse
I love you so much right now.
I tried this firmware on a separate computer, and didn't try it on my main PC because it wasn't necessary, however, it worked. It went through and flashed correctly, and my phone booted into recovery mode. I had to wipe the cache, and it began setting up the phone like normal.
THANK YOU SO MUCH!

Pyroshox said:
I love you so much right now.
I tried this firmware on a separate computer, and didn't try it on my main PC because it wasn't necessary, however, it worked. It went through and flashed correctly, and my phone booted into recovery mode. I had to wipe the cache, and it began setting up the phone like normal.
THANK YOU SO MUCH!
Click to expand...
Click to collapse
No problem mate
Glad it worked

roba93 said:
No problem mate
Glad it worked
Click to expand...
Click to collapse
Yay it unbricked my phone too!
it is hard to find a guide with all the phone versions/updates, just specific solutions. Well this one magically worked, thank you.
I have a sm-g935a (att) - It would bootloop, after several attempts to recover by flashing various files the phone would give all sorts of errors depending on the version flashed, stop at recovery mode and not go any further, although let me wipe it. hope this helps if you have a similar porblem

S7 Edge 935F Odin Fail

Hi Guys
Was running a custom N7 rom by Laypota decided in my wisdom that i would wipe before in updated to a new version of his rom unfortunatley i wiped more than i wanted to and now i am left with a phone that wont boot i cannot access recovery mode but can access download mode i went to samobile and downloaded a stock firmware for my phone went into odin and here is the error i am getting any help would be very appriciated thanks
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/005> Added!!

Trying to get from SM-G935p to G935T REV Check Fail

Alright so I am trying to convert my sprint phone to work on tmobile my phone was upgraded to 7.0 so I downloaded SM-G935TUVS4QB1 software to flash it to tmobile, however I get SW REV CHECK FAIL : {aboot]Fused 5 > Binary 4. I am using Odin 3.12 and I see this error a lot with people trying to downgrade, but the phone is on 7.0. This is a copy of the odin log any help is appreciated.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

LeeFerio said:
Alright so I am trying to convert my sprint phone to work on tmobile my phone was upgraded to 7.0 so I downloaded SM-G935TUVS4QB1 software to flash it to tmobile, however I get SW REV CHECK FAIL : {aboot]Fused 5 > Binary 4. I am using Odin 3.12 and I see this error a lot with people trying to downgrade, but the phone is on 7.0. This is a copy of the odin log any help is appreciated.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It looks like you are trying to flash a firmware with bootloader version 4 over version 5. look at the 5th digit from the right in the firmware version and thats the bootloader version. Im afraid you are stuck on the Sprint firmware because tmobile versions are all bootloader 4 and you cant downgrade bootloader versions.

bsharp8 said:
It looks like you are trying to flash a firmware with bootloader version 4 over version 5. look at the 5th digit from the right in the firmware version and thats the bootloader version. Im afraid you are stuck on the Sprint firmware because tmobile versions are all bootloader 4 and you cant downgrade bootloader versions.
Click to expand...
Click to collapse
Interesting that makes sense. Thank you for the response I appreciate that.

No problem