Update 2 after some fiddling I found that after flashing Pico Capps hdxposed is needed to make the play store work on this build http://forum.xda-developers.com/showthread.php?t=2618158
Update 1 New lolipop ota, this appears to be based on lolipop 5.1 and as such requires xposed unofficial by romracer if you want to use xposed Xposed for 5.0 would not flash for me. Same upgrade steps as before just this one instead of the bottom one and change your xposed package
https://mega.nz/#!i5RRCKQZ!NC291mcIo-2yzr23j8Vg_mLZ11ECql4lL_xen6xwXuM
update-kindle-devpreview_ariel-20.5.2.2_user_522041550.bin
siegesoldier said:
this is the developer preview, sorry if the title is a little misleading. Thanks to http://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-4-5-4-twrp-root-t3141648
Use at your own risk.
https://www.dropbox.com/s/38i2lqq5p...review_ariel-20.5.2.0_user_520033250.bin?dl=0
Hopefully someone can figure out how to make this thing boot when flashed from TWRP
Click to expand...
Click to collapse
Important update, the instructions below are not to be followed !!! They are historical ...
Same drill as in here :
http://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-4-5-4-twrp-root-t3141648
Replace the original META-INF/com/google/android/updater-script with the one from the zip below. Remove "images" directory. This will ensure that your bootloader stays 4.5.3 and unlocked. When TWRP asks to add root, say yes.
If for some reason you lose TWRP (recovery), reflash it from within 5.0. Since you have root, no biggie. I'll play with this a bit too, but later.
I tried yours and tried my attempt. I'm getting a bootloop with both, let me know if you have any luck. TWRP protects itself from getting replaced.
siegesoldier said:
I tried yours and tried my attempt. I'm getting a bootloop with both, let me know if you have any luck. TWRP protects itself from getting replaced.
Click to expand...
Click to collapse
OK. Does it flash successfully? Does it ask to install root? If it does and bootloops, the bootloader probably needs to be updated too. You could try to flash the new bootloader (just grab my uboot_4.5.3.zip, replace both files in /images, and re-zip).
The trick is that you install Lollipop, install root, and install the new bootloader separately. It should boot OK and you should have root in 5, but you'll lose TWRP (it won't be able to boot since the bootloader will probably be signed). To get TWRP back you'll need to downgrade to 4.5.3
bibikalka said:
OK. Does it flash successfully? Does it ask to install root? If it does and bootloops, the bootloader probably needs to be updated too. You could try to flash the new bootloader (just grab my uboot_4.5.3.zip, replace both files in /images, and re-zip
Click to expand...
Click to collapse
Yes it flashes successfully and asks to install root. Looks like I'll be trying that tonight, thanks!
Edit we have a winner.
Flashed lolipop without bootloader
Installed su
Reboot to recovery
Installed superuser flashable zip
Flashed uboot file with lolipop images folder
Fire has booted and is currently doing the very long lolipop upgrading screen
Currently booting to home screen but then back to the fire screen, etc. Probably my fault for not clearing the cache or a factory reset. I'm not at a computer at the moment but any ideas on how to fix this?
siegesoldier said:
Currently booting to home screen but then back to the fire screen, etc. Probably my fault for not clearing the cache or a factory reset. I'm not at a computer at the moment but any ideas on how to fix this?
Click to expand...
Click to collapse
Turn it off with a long press of "power" button. Then press "power" and "vol+" together, this should get you into the Amazon recovery. It should offer you a factory reset option. Your system should be pretty much stock Lollipop, so I don't see why it should be doing what it does ...
Actually, does it now have stock Amazon recovery or TWRP ? My suspicion is that it should have flashed recovery during the first upgrade cycle.
Upon reflection, there is a chance you have a bit of a soft brick. If the factory reset option does not come up, it may end up a little tricky to fix things. I wonder if you'd be able to connect via adb before it reboots.
bibikalka said:
Turn it off with a long press of "power" button. Then press "power" and "vol+" together, this should get you into the Amazon recovery. It should offer you a factory reset option. Your system should be pretty much stock Lollipop, so I don't see why it should be doing what it does ...
Actually, does it now have stock Amazon recovery or TWRP ? My suspicion is that it should have flashed recovery during the first upgrade cycle.
Click to expand...
Click to collapse
it appears to have TWRP but it will not boot to it with holding keys. I can get the device to appear in ADB but I can not authorize it. Appears to not actually be rebooting. just crashing to fire screen for some reason then back to launcher etc. I may be able to try again at home with a usb port that it remembers.
siegesoldier said:
it appears to have TWRP but it will not boot to it with holding keys. I can get the device to appear in ADB but I can not authorize it. Appears to not actually be rebooting. just crashing to fire screen for some reason then back to launcher etc. I may be able to try again at home with a usb port that it remembers.
Click to expand...
Click to collapse
I wonder if Lollipop does not update recovery at all, and just uses the one from 4.5.4 You do have your old settings around, so there is a chance that prior USB authorization will help. It looks like one should have updated to stock recovery while in TWRP as the last step, after updating the bootloader, ir order to be able to do a factory reset in a situation like this.
If it comes to worst, Amazon reps never ask "did you brick the device yourself?". They only ask if you can get to the home screen, and if not, proceed with the replacement
I think TWRP just blocked it from updating. Oh well, if the ports at home don't work, I was eventually going to get it replaced anyway since I had a blue discoloration on my screen. Glad to be of some moderate use to the community instead of a leecher for once. May the next person have some luck!
bibikalka said:
I wonder if Lollipop does not update recovery at all, and just uses the one from 4.5.4 You do have your old settings around, so there is a chance that prior USB authorization will help. It looks like one should have updated to stock recovery while in TWRP as the last step, after updating the bootloader, ir order to be able to do a factory reset in a situation like this.
If it comes to worst, Amazon reps never ask "did you brick the device yourself?". They only ask if you can get to the home screen, and if not, proceed with the replacement
Click to expand...
Click to collapse
ok I was able to get adb on a previously used port. I do not have root though. What are my options? What recovery should I flash? I also have a replacement kindle coming tomorrow so this is mostly for science now. I am also able to get into bootloader.
erased cache via fastboot. stuck on fire instead of boot to homescreen
siegesoldier said:
ok I was able to get adb on a previously used port. I do not have root though. What are my options? What recovery should I flash? I also have a replacement kindle coming tomorrow so this is mostly for science now. I am also able to get into bootloader.
erased cache via fastboot. stuck on fire instead of boot to homescreen
Click to expand...
Click to collapse
So no adb anymore? I am not sure how SuperSu comes in, there gotta be su program somewhere.
Anyway, the great news is that JMZ is going to be back soon. That's going to boost our tinkering capabilities by 300%
siegesoldier said:
Yes it flashes successfully and asks to install root. Looks like I'll be trying that tonight, thanks!
Edit we have a winner.
Flashed lolipop without bootloader
Installed su
Reboot to recovery
Installed superuser flashable zip
Flashed uboot file with lolipop images folder
Fire has booted and is currently doing the very long lolipop upgrading screen
Click to expand...
Click to collapse
And then soft brick ...
So I wonder now if one could do this :
install 5.2.0 via TWRP
install supersu.zip
and here it gets very tricky:
without any reboots, replace TEE1, UBOOT, and recovery to stock versions 5.2.0
The hope is to end up in 5.2.0 with root. If things fail, then booting into 5.2.0 recovery (which must be installed!!!) should give one an option to do 1) factory reset 2) downgrade to stock 4.5.3 as in here : http://forum.xda-developers.com/fire-hd/general/how-to-downgrade-to-4-5-3-root-device-t3139351
The problem is that I don't see a way to boot into 5.2.0, and then flash GAPPS after (since your TWRP was replaced by stock recovery earlier). So one would have to install GAPPS those via something like Titanium backup if root does work.
Please, if you already had 1 warranty replacement, don't do this. And, if you replace TEE1 and UBOOT (5.2.0) but not recovery, then you won't have any way to recover.
bibikalka said:
And then soft brick ...
So I wonder now if one could do this :
install 5.2.0 via TWRP
install supersu.zip
and here it gets very tricky:
without any reboots, replace TEE1, UBOOT, and recovery to stock versions 5.2.0
The hope is to end up in 5.2.0 with root. If things fail, then booting into 5.2.0 recovery (which must be installed!!!) should give one an option to do 1) factory reset 2) downgrade to stock 4.5.3 as in here : http://forum.xda-developers.com/fire-hd/general/how-to-downgrade-to-4-5-3-root-device-t3139351
The problem is that I don't see a way to boot into 5.2.0, and then flash GAPPS after (since your TWRP was replaced by stock recovery earlier). So one would have to install GAPPS those via something like Titanium backup if root does work.
Please, if you already had 1 warranty replacement, don't do this. And, if you replace TEE1 and UBOOT (5.2.0) but not recovery, then you won't have any way to recover.
Click to expand...
Click to collapse
Yes I've used my warranty replacement so I'll be waiting until the official release before breaking my kindle again . How do you stop TWRP from preventing the recovery from being flashed? I noticed it gave a message about protecting itself.
siegesoldier said:
Yes I've used my warranty replacement so I'll be waiting until the official release before breaking my kindle again . How do you stop TWRP from preventing the recovery from being flashed? I noticed it gave a message about protecting itself.
Click to expand...
Click to collapse
Interesting, at what stage of the update did this happen? 5.2.0 file system is slightly packaged and is pain in the neck to peak into, but in 4.5.3 the recovery is updated via a pretty specific command install-recovery.sh , and I cannot find any references to this in updater-script. So I wonder at what stage will this be run. Also, there is no direct image for recovery, one has to reconstruct it as the commands below do. A bit messy ...
install-recovery.sh
Code:
#!/system/bin/sh
if ! applypatch -c EMMC:/dev/block/platform/mtk-msdc.0/by-name/recovery:5888256:6d9d1bbc4172c107db3228ed8d9f97111219c617; then
log -t recovery "Installing new recovery image"
applypatch -b /system/etc/recovery-resource.dat EMMC:/dev/block/platform/mtk-msdc.0/by-name/boot:5370112:c2c686ada1b194050a3c8f05e2102345df48e9ce EMMC:/dev/block/platform/mtk-msdc.0/by-name/recovery 6d9d1bbc4172c107db3228ed8d9f97111219c617 5888256 c2c686ada1b194050a3c8f05e2102345df48e9ce:/system/recovery-from-boot.p
else
log -t recovery "Recovery image already installed"
fi
Edit: It kind of looks like /system/etc/install-recovery.sh will be run at every boot. So I wonder if TWRP just renames it to something and calls it "protection". I guess one can double check the file system after 5.2.0 update while still in TWRP, and see what happened to recovery files.
Help
If someone can please help me. I downloaded the update to 5.0, unzipped it, replaced the updater script, but when I zip it back and try to flash it says that it failed. Am I doing something wrong.
Also, if someone has the zip file already and wouldn't mind uploading and sharing it, I would appreciate it.
Thanks for all the help.
hawkazn said:
If someone can please help me. I downloaded the update to 5.0, unzipped it, replaced the updater script, but when I zip it back and try to flash it says that it failed. Am I doing something wrong.
Also, if someone has the zip file already and wouldn't mind uploading and sharing it, I would appreciate it.
Thanks for all the help.
Click to expand...
Click to collapse
Last time this procedure ended up with a soft brick. Are you sure you want to pursue this route?
Help
Maybe not, but if someone can help me with something else. The developer preview for the camera is extremely sharp and the 4.5.4 really isn't. Is there a way to make it crystal clear and sharp?
hawkazn said:
Maybe not, but if someone can help me with something else. The developer preview for the camera is extremely sharp and the 4.5.4 really isn't. Is there a way to make it crystal clear and sharp?
Click to expand...
Click to collapse
Meaning exactly what? It'd be possible to replace the camera app, one for another. Do you think some other system stuff is involved such as some sort of settings?
You'll have to find a way to mount the big 5.2.0 system update file as a filesystem, then you could read what's in there, including the camera stuff.
TWRP help
So I downloaded the zip file for 5.0 and it flashed and asked to install super user. I had to download the apk for supersu and then update it.
But the problem is that I lost my twrp. I push the volume + and power and it just reboots. I also lost my play store. Any thoughts how to get twrp back on?
Related
All,
Thanks in advance for any help you can provide. I have a Nexus 4 that I rooted and installed CWM recovery on, but I never installed any new kernels, ROMs, or radios. I'm currently on 4.4.4 and I want to upgrade to Lollipop. The OTA upgrade failed. So I tried returning to stock recovery and doing both the OTA and adb sideloading the OTA zip. Both fail.
The error message is "Package expects build fingerprint of google/occam/mako:4.4.4/KTU84P/1227136:user/release-keys or google/occam/mako:5.0/LRX21T/1576899:user/release-keys; this device has google/occam/mako:4.4/KRT160/907817:user/release-keys." (But I definitely have 4.4.4 on my phone, not 4.4.0.)
The extra difficulty is that I really, really do not want to wipe my phone. I have a lot of apps with a lot of configuration and other user data. So is there anything I can do? I guess I should try unrooting somehow? Or is there some other zip I can download that, through some type of recovery, will install the OTA without doing this check and also without wiping me?
Thanks again!
moriarty00 said:
All,
Thanks in advance for any help you can provide. I have a Nexus 4 that I rooted and installed CWM recovery on, but I never installed any new kernels, ROMs, or radios. I'm currently on 4.4.4 and I want to upgrade to Lollipop. The OTA upgrade failed. So I tried returning to stock recovery and doing both the OTA and adb sideloading the OTA zip. Both fail.
The error message is "Package expects build fingerprint of google/occam/mako:4.4.4/KTU84P/1227136:user/release-keys or google/occam/mako:5.0/LRX21T/1576899:user/release-keys; this device has google/occam/mako:4.4/KRT160/907817:user/release-keys." (But I definitely have 4.4.4 on my phone, not 4.4.0.)
The extra difficulty is that I really, really do not want to wipe my phone. I have a lot of apps with a lot of configuration and other user data. So is there anything I can do? I guess I should try unrooting somehow? Or is there some other zip I can download that, through some type of recovery, will install the OTA without doing this check and also without wiping me?
Thanks again!
Click to expand...
Click to collapse
OTA wants complete stock and obviously it doesn't think so about your phone. One option could be to back up to the cloud or some place outside the phone with TiBu (or whatever backup app you trust), then flash lollipop and try restore from TiBu. Another option would be to unroot (Supersu has an option to completely unroot), then retry.
Actually, I figured out what works! This was on a stock rooted device with stock recovery, but I bet it would work with custom recovery too. Instructions modified from https://pay.reddit.com/r/nexus4/comments/1qny3f/howto_update_your_stock_w_lte_nexus_4_without/ .
1. Download the image you want from https://developers.google.com/android/nexus/images . Extract it, extract the .zip file inside it too, and collect all of the .img files into one folder.
2. adb reboot bootloader (and wait until the bootloader comes up)
3. fastboot flash bootloader bootloader-mako-makoz30f.img (or whatever file has a similar name, if you got a different image than I did)
4. fastboot reboot-bootloader (and wait until the bootloader comes back up)
5. fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1701.04.img (or whatever file has a similar name, if you got a different image than I did)
6. fastboot reboot-bootloader (and wait until the bootloader comes back up)
7. fastboot flash boot boot.img
8. fastboot flash recovery recovery.img
9. fastboot flash system system.img
10. fastboot format cache
11. fastboot reboot
12. Don't panic unless you've seen the startup animation for at least 15 minutes without anything else happening.
I lost root, but I imagine re-custom-recoverying and re-rooting won't be any harder than the first time around.
Hi moriarty00,
I'm going to try the same procedure, thank you for posting this.
Can you confirm that your data and app are safe after the upgrade?
moriarty00 said:
Actually, I figured out what works! This was on a stock rooted device with stock recovery, but I bet it would work with custom recovery too. Instructions modified from https://pay.reddit.com/r/nexus4/comments/1qny3f/howto_update_your_stock_w_lte_nexus_4_without/ .
1. Download the image you want from https://developers.google.com/android/nexus/images . Extract it, extract the .zip file inside it too, and collect all of the .img files into one folder.
2. adb reboot bootloader (and wait until the bootloader comes up)
3. fastboot flash bootloader bootloader-mako-makoz30f.img (or whatever file has a similar name, if you got a different image than I did)
4. fastboot reboot-bootloader (and wait until the bootloader comes back up)
5. fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1701.04.img (or whatever file has a similar name, if you got a different image than I did)
6. fastboot reboot-bootloader (and wait until the bootloader comes back up)
7. fastboot flash boot boot.img
8. fastboot flash recovery recovery.img
9. fastboot flash system system.img
10. fastboot format cache
11. fastboot reboot
12. Don't panic unless you've seen the startup animation for at least 15 minutes without anything else happening.
I lost root, but I imagine re-custom-recoverying and re-rooting won't be any harder than the first time around.
Click to expand...
Click to collapse
Wow, a 12-step program
I simply rolled back my changes, and applying the OTA was as simple as pressing the "restart and install" button Here are some steps:
I used the app Flashify from Play Store to flash stock 4.4.4 recovery. I downloaded the stock factory image from google's own site (this one), used 7zip to extract the archives (tgz and tar), found "recovery.img" and transfered that to my phone. Then chose that file in Flashify.
Uninstalled all apps that made system changes, like Xposed framework and mods, BetterBatteryStats etc.
Removed Root with SuperSU cleanup function
Rebooted for good measure and apply OTA from notification - wait an hour or two for it to complete
Profit (do we still say that on the internet? Getting old here...)
I don't know if certain ways to get root will break the OTA. I used towel-root, and apparently SuperSU was able to undo that completely.
DrDruge said:
Hi moriarty00,
I'm going to try the same procedure, thank you for posting this.
Can you confirm that your data and app are safe after the upgrade?
Click to expand...
Click to collapse
Yup, perfectly safe! Just make sure not to flash other images, like userdata.img.
venu123 said:
OTA wants complete stock and obviously it doesn't think so about your phone. One option could be to back up to the cloud or some place outside the phone with TiBu (or whatever backup app you trust), then flash lollipop and try restore from TiBu. Another option would be to unroot (Supersu has an option to completely unroot), then retry.
Click to expand...
Click to collapse
If I unroot with Supersu how do I get root back?
moriarty00 said:
Yup, perfectly safe! Just make sure not to flash other images, like userdata.img.
Click to expand...
Click to collapse
Thank you!
Unfortunately the steps did not work for me, maybe I had some irreversible modifications or I had followed a different rooting procedure.
Or maybe I made a mistake in the upgrading steps.
Anyway, I had to flash the whole ROM and now everything is working fine.
Hey!
Basically I have similar problem with upgrading from 4.4.4 to 5.0 using OTA. Log from TWRP says:
Package expects build fingerprint of google/occam/mako:4.4.4/KTU84P/1227136:user/release-keys or google/occam/mako:5.0/LRX21T/1576899:user/release-keys; this device has google/occam/mako:4.3/JWR66V/737497:user/release-keys.
Click to expand...
Click to collapse
Phone has been rooted using Nexus Root Toolkit. And as long as there wouldn't be a problem with flashing using adb and wiping all data, there is one setback... My nexus is somehow broken. Communication via USB does not work, at all. Neither phone nor PC sees other device. Certified LG service centre nearby said that it is problem with main board, so generally repair is unprofitable.
So question is: How do I update to 5.0 and then root, without USB connection to my PC?
*** NOTE: Please excuse my English.
*** WARNING: I'm not responsible if anything happens to your device, I'm just sharing my experience and what I did to fix my own phone. Proceed at your own RISK.
I bought my Nexus 6p 64gb and as soon as I took it out of the box, I went directly and followed the guide here. So i unlocked the bootloader, flashed TWRP as a custom recovery, flashed CM13 + OpenGapps.
I noticed that every time I boot my device I get this warning:
Your device is corrupt. It can’t be
trusted and may not work properly.
Visit this link on another device:
go.co/ABH
and it does not seem to be a normal warning because when my OS boots up it shows me this
"Android system:
There’s an internal problem with your device. Contact your manufacturer for details"
Later on when I updated to the latest nightly image my camera crashes and doesn't function properly. I also already has an issue with Bluetooth and "Bluetooth share" crashing but that was unrelated. Anyways I was crippled in my day to day usage. Then I thought that I need to fix this asap because it might cause performance/security/hardware problems in the future.
So basically the fix is you should flash the latest bootloader image and radio image. Personally I wanted to start clean and make sure I have no corrupted files so here is what I did,
1. What i did is erase all boot, system, kernel & recovery files by typing the below command using fastboot just incase they were corrupted,
(Note: YOU DONT NEED TO DO THIS STEP, but i prefer starting clean incase i had some corrupted files. YOU WILL ALSO LOSE ENCRYPTION DOING THE FIRST STEP)
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
Source: http://devs-lab.com/...i-nexus-6p.html
2. Then i flashed the latest factory images in this sequence using fastboot, which can be found here: https://developers.g...s/images#angler
(Note: 6.0.1 (MMB29M) was latest image at the time i did this. For people who are doing this for the first time, then you just need to download the image then extract the needed files from it)
fastboot flash bootloader bootloader-angler-angler-xx.xxx.img
fastboot reboot-bootloader
fastboot flash radio radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash vendor vendor.img
fastboot format userdata
fastboot reboot
Source: http://forum.xda-dev...operly-t3268407
3. From there i reflashed TWRP using fastboot, then flashed the latest beta SuperSU v2.62 at the time, and then CM13, then OpenGapps, then again reflashed SuperSU v2.62 just incase, lol. (Do not flash the version of SuperSU that TWRP offers to flash for you in order to give you root, it is not compatible and will cause problems. When using TWRP before you've actually flashed SuperSU 2.50+, when you attempt to reboot out of TWRP it will tell you that it's detecting that you don't have root and it will offer to root for you, skip past this.)
What got fixed ?
-FIXED, this won't show up anymore:
Your device is corrupt. It can’t be
trusted and may not work properly.
Visit this link on another device:
go.co/ABH
-FIXED, this won't show up anymore:
Android system:
There’s an internal problem with your device. Contact your manufacturer for details.
-FIXED, Camera is working !
-NOT FIXED, "Bluetooth share" still crashes but I think its unrelated to this issue.
Hope this helps everyone as it helped me, thanks.
Sent from my Nexus 6P using Tapatalk
\*O / Thank you !!
Thanks, but better option? Don't reboot.
Sent from my Nexus 6P using Tapatalk
bob_mord_les said:
\*O / Thank you !!
Click to expand...
Click to collapse
Ur welcome [emoji1]
Sent from my Nexus 6P using Tapatalk
Followed your guide, thanks, but the message "Your device is corrupt. It can’t betrusted and may not work properly." still appears during a CM boot.
The message "There’s an internal problem with your device. Contact your manufacturer for details" appears when I boot into recovery (TWRP)
The camera is working now.
Also, before I was able to flash CM-13 I had to do "WIPE >> Format Data" from TWRP, otherwise CM was exiting with error 7.
The following packages were used:
original 6.0.1 (MMB29P) factory image
BETA-SuperSU-v2.66-20160103015024.zip
cm-13.0-20160115-NIGHTLY-angler.zip
open_gapps-arm64-6.0-micro-20160115.zip
twrp-2.8.7.2-angler.img
I also noticed that when rebooting into factory image, the same warning message appears as well.
Any way to fix it or did I do something wrong?
Why are people trying to fix an non issue? To get rid of the message you need to relock the bootloader which is more of a risk if your rooted. Its a message that only appears for a few seconds when you reboot and you don't need to do anything to get past it.
There is no corruption and the phone is trusted by YOU as you unlocked it and nothing else cares. Where is the issue?
g_kos said:
Followed your guide, thanks, but the message "Your device is corrupt. It can’t betrusted and may not work properly." still appears during a CM boot.
The message "There’s an internal problem with your device. Contact your manufacturer for details" appears when I boot into recovery (TWRP)
The camera is working now.
Also, before I was able to flash CM-13 I had to do "WIPE >> Format Data" from TWRP, otherwise CM was exiting with error 7.
The following packages were used:
original 6.0.1 (MMB29P) factory image
BETA-SuperSU-v2.66-20160103015024.zip
cm-13.0-20160115-NIGHTLY-angler.zip
open_gapps-arm64-6.0-micro-20160115.zip
twrp-2.8.7.2-angler.img
I also noticed that when rebooting into factory image, the same warning message appears as well.
Any way to fix it or did I do something wrong?
Click to expand...
Click to collapse
It's just telling you what you already know. You modified your system partition yourself so don't worry about it.
https://support.google.com/nexus/answer/6185381?hl=en
XxMORPHEOUSxX said:
It's just telling you what you already know. You modified your system partition yourself so don't worry about it.
https://support.google.com/nexus/answer/6185381?hl=en
Click to expand...
Click to collapse
Thanks. I read it in the original Heisenberg's unlock guide and was surprised when I read this post that it was possible to get rid of the warning message without locking the bootloader .
I'm new here in the forum's..I usually just read and carry on..the one think I'd like to say is..I don't understand why people got to say 'why you doing that for, ya don't need to' far as I know..this an educational site to learn..if he wants learn how to get rid of the warning..I don't see any problems in that whatsoever.
The message "There is an internal problem with your device..." seems to be related to the security patch version. This was my biggest issue, the message I get when booting the phone was annoying and I knew it was not a big deal, but having an internal problem warning was concerning, flashing the vendor image was the solution for me. But if you like to start clean then I have the steps written, but if you update then again you'll get the warning when booting up.
Sent from my Nexus 6P using Tapatalk
zooman31 said:
I'm new here in the forum's..I usually just read and carry on..the one think I'd like to say is..I don't understand why people got to say 'why you doing that for, ya don't need to' far as I know..this an educational site to learn..if he wants learn how to get rid of the warning..I don't see any problems in that whatsoever.
Click to expand...
Click to collapse
I think what people are trying to say is the risk/reward for getting rid of the message is not worth it. Especially since its just a brief warning you only see during boot. Just flashing twrp recovery will give the red message. SuperSU will help get rid of it which is why the OP was able to remedy it. It will not work for everyone though. Modifying the bootloader is the only sure fire way to snuff it out for good and you would be a fool to try and mess with your bootloader for something aesthetic. That's how most real bricks happen, is when a bootloader gets corrupted.
XxMORPHEOUSxX said:
I think what people are trying to say is the risk/reward for getting rid of the message is not worth it. Especially since its just a brief warning you only see during bouot. Just flashing twrp recovery will give the red message. SuperSU will help get rid of it which is why the OP was able to remedy it. It will not work for everyone though. Modifying the bootloader is the only sure fire way to snuff it out for good and you would be a fool to try and mess with your bootloader for something aesthetic. That's how most real bricks happen, is when a bootloader gets corrupted.
Click to expand...
Click to collapse
I assume that most people know the drill..you proceed to test at your own risk..the how to in the first post seemed to have worked after it was tested by the author.
zooman31 said:
I assume that most people know the drill..you proceed to test at your own risk..the how to in the first post seemed to have worked after it was tested by the author.
Click to expand...
Click to collapse
Basically just flash SuperSU last in whatever sequence, and as long as it boots,the red message will be gone. But change anything after and it will probably come back. I have nothing negative to say about this thread. I originally posted the nexus link just so people can rest assured that it is not an actual problem and a normal, albeit annoying, side effect of modifying the Nexus 6p. Happy Flashing
XxMORPHEOUSxX said:
Basically just flash SuperSU last in whatever sequence, and as long as it boots,the red message will be gone. But change anything after and it will probably come back. I have nothing negative to say about this thread. I originally posted the nexus link just so people can rest assured that it is not an actual problem and a normal, albeit annoying, side effect of modifying the Nexus 6p. Happy Flashing
Click to expand...
Click to collapse
all i did was flash twrp and unlocked the bootloader and still got the red message. so all i have to do is flash supersu and root? to get rid of it?
TechMillz93 said:
all i did was flash twrp and unlocked the bootloader and still got the red message. so all i have to do is flash supersu and root? to get rid of it?
Click to expand...
Click to collapse
Yes. The SuperSU beta 2.66 is what I use.
XxMORPHEOUSxX said:
Yes. The SuperSU beta 2.66 is what I use.
Click to expand...
Click to collapse
so i just reflashed the vendor and now im in bootloop ;(
TechMillz93 said:
so i just reflashed the vendor and now im in bootloop ;(
Click to expand...
Click to collapse
Why did you flash vendor? Try clearing caches and then reboot. Let it sit for 10 min too while starting up.
XxMORPHEOUSxX said:
Why did you flash vendor? Try clearing caches and then reboot. Let it sit for 10 min too while starting up.
Click to expand...
Click to collapse
im good now i just reflashed all the images im good.
but i have to feflash twrp now, what would u recommend
systemless or traditional ?
TechMillz93 said:
im good now i just reflashed all the images im good.
but i have to feflash twrp now, what would u recommend
systemless or traditional ?
Click to expand...
Click to collapse
Systemless unless you want to use xposed otherwise it doesn't matter. Systemless just makes it so you can use root apps like android pay. I use the 2.66 systemless. The instructions are a little all over the place on that thread. You no longer need a modified boot.IMG. the SuperSU zip patches whatever boot.IMG you have. So all you need to flash is the supersu2.66 for systemless or the traditional zip if going that route.
XxMORPHEOUSxX said:
Systemless unless you want to use xposed otherwise it doesn't matter. Systemless just makes it so you can use root apps like android pay. I use the 2.66 systemless. The instructions are a little all over the place on that thread. You no longer need a modified boot.IMG. the SuperSU zip patches whatever boot.IMG you have. So all you need to flash is the supersu2.66 for systemless or the traditional zip if going that route.
Click to expand...
Click to collapse
so i dont need gapps etc?
its all in there?
Not that I want to, but if I wanted to.. Is there a way to return the unlocked bootloader version back to stock to where I can receive OTA's?
Like I said, I don't necessarily want to, but if I needed to for some reason.
tele_jas said:
Not that I want to, but if I wanted to.. Is there a way to return the unlocked bootloader version back to stock to where I can receive OTA's?
Like I said, I don't necessarily want to, but if I needed to for some reason.
Click to expand...
Click to collapse
Yes you can via Rczrider 's TWRP backup
tele_jas said:
Not that I want to, but if I wanted to.. Is there a way to return the unlocked bootloader version back to stock to where I can receive OTA's?
Like I said, I don't necessarily want to, but if I needed to for some reason.
Click to expand...
Click to collapse
XblackdemonX said:
Yes you can via Rczrider 's TWRP backup
Click to expand...
Click to collapse
Yeah, it looks like @tenfar updated their tool to use the stock files from my untouched B20: http://forum.xda-developers.com/axon-7/development/wip-axon-7-root-bootloader-unlokced-t3441204
rczrider said:
Yeah, it looks like @tenfar updated their tool to use the stock files from my untouched B20: http://forum.xda-developers.com/axon-7/development/wip-axon-7-root-bootloader-unlokced-t3441204
Click to expand...
Click to collapse
if someone can make a guide on HOW-TO (Steps + FIles + Images needed) i can give it a shot...
just send me a PM if you know the HOW-TO :good:
Mmmmm, noone yet?.... I guess I'll start gathering info.
One thing I wanna make sure flashing @tenfar boot. Img = need Data wipe right?
DrakenFX said:
Mmmmm, noone yet?.... I guess I'll start gathering info.
One thing I wanna make sure flashing @tenfar boot. Img = need Data wipe right?
Click to expand...
Click to collapse
I've been flashing custom ROM's for several years, but I've bricked one too many phones over the years "not knowing" the correct way to do certain things... So I started this thread to see what those steps were because I'm too scared to attempt it myself. :silly:
So, I know I'd appreciate your efforts in this!
tele_jas said:
I've been flashing custom ROM's for several years, but I've bricked one too many phones over the years "not knowing" the correct way to do certain things... So I started this thread to see what those steps were because I'm too scared to attempt it myself. :silly:
So, I know I'd appreciate your efforts in this!
Click to expand...
Click to collapse
I'm curious too and I wanna give it shot,
P. S. Any way to use terminal or adb to pull the partition list with their Extension?
Like for sample. " ext4 system /dev/block/sde13 " or something similar with extension?
Has anyone got a step-by-step for this yet? I searched, but don't see a "Back to Stock" thread
tele_jas said:
Has anyone got a step-by-step for this yet? I searched, but don't see a "Back to Stock" thread
Click to expand...
Click to collapse
i created a Thread for users who have run into the No Boot issues and those problems , so i can gather more info of the causes of their problems but nobody had reply yet,
just waiting so i can test things and get back to Stock B20 with Root + TWRP and lock bootloader
It is still not clear where the unlock bootloader state is recorder. I have checked a couple of partitions but they are identical to locked B20 (aboot, devinfo were my prime suspects)
So assuming that this is not a permanent thing for the bootloader state and can be reversed, steps would be something like this
1. lock bootloader
2a. flash Stock B20 image and signed(tenfars) TWRP via axon7root
3. Reboot in TWRP (read only mode), full factory wipe (wipe plus /data format), flash original system image via twrp, wipe data again
4. turn off phone, don't reboot (no system start)
5. flash stock recovery via axon7root
6. Reboot to Stock Recovery direct (do not boot)
7. Factory reset from stock recovery
8. Reboot
But there are a few unknowns yet, even with stock system, boot and recovery we still have stuck loops unless using modded boot. My guess is that TWRP mods /system on exit, that's why i put read only mode but not sure if you can restore it if it's not rw. Since it's image to device it should work, RW is for mounting partition
And big one is if unlock state is permanent or not, not sure anyone tried yet
peramikic said:
It is still not clear where the unlock bootloader state is recorder. I have checked a couple of partitions but they are identical to locked B20 (aboot, devinfo were my prime suspects)
So assuming that this is not a permanent thing for the bootloader state and can be reversed, steps would be something like this
1. lock bootloader
2a. flash Stock B20 image and signed(tenfars) TWRP via axon7root
3. Reboot in TWRP (read only mode), full factory wipe (wipe plus /data format), flash original system image via twrp, wipe data again
4. turn off phone, don't reboot (no system start)
5. flash stock recovery via axon7root
6. Reboot to Stock Recovery direct (do not boot)
7. Factory reset from stock recovery
8. Reboot
But there are a few unknowns yet, even with stock system, boot and recovery we still have stuck loops unless using modded boot. My guess is that TWRP mods /system on exit, that's why i put read only mode but not sure if you can restore it if it's not rw. Since it's image to device it should work, RW is for mounting partition
And big one is if unlock state is permanent or not, not sure anyone tried yet
Click to expand...
Click to collapse
those steps were the same i was planning to do plus flashing something else, but seems like i may be not doing the other flashing file now......well still gathering more info and will see.
P.S. Thanks for the info. @peramikic
DrakenFX said:
i created a Thread for users who have run into the No Boot issues and those problems , so i can gather more info of the causes of their problems but nobody had reply yet,
just waiting so i can test things and get back to Stock B20 with Root + TWRP and lock bootloader
Click to expand...
Click to collapse
Gottcha.... I was just curious, because I'm starting to have a few random issues (reboots, apps opening without tapping them, google voice commands not working like they did just a few days ago) I'd like to get back to stock and maybe start over. Of course, I didn't make a backup up until after I flashed SuperSU and my apps downloaded so I have no "stock" TWRP backup. **But, this all could be "theme" related too, since I'm running a dark theme that isn't quite compatible with the A7 yet.
I may try removing the theme and let it run a day or two and see how it does?
So this morning I got an update to fix the voLTE bug. I'm unlocked with twrp installed and rooted. Just for the sake of experimenting I tried installing it. Well that didn't work. Just gets stuck in twrp recovery and you have to power the phone off completely to get it to boot. I guess my question (even though it's a little early) is there a way to install the update without reverting back to stock?
EDIT: Link to the zip
https://drive.google.com/open?id=0BxqNotAWlwLUQ1Fzcjc2YXd4QzA
I don't believe so.
In the past you either had to go back to stock or wait on someone to create a compatible update for rooted devices.
Can you post link to zip?
If you are rooted, you can find the zip in cache folder in recovery.
Can you add what variant and build you are using before the update? Also the build afterwards?
KapilFaujdar said:
Can you post link to zip?
If you are rooted, you can find the zip in cache folder in recovery.
Click to expand...
Click to collapse
I got the update, but all I see on my magisk rooted G5+ in /cache/recovery are log files and the fstab files. Anywhere else to look?
gghose said:
I got the update, but all I see on my magisk rooted G5+ in /cache/recovery are log files and the fstab files. Anywhere else to look?
Click to expand...
Click to collapse
Yeah I can't find anything in that folder either.
I received the update and applied it. I am not rooted.
I have the XT1687 model.
My current build number is NPN25.137-35
My device BL unlocked, TWRP installed and rooted with magisck.
I'm getting the update notification and splash screens several times daily.
Anyone rooted try installing the update with Flashfire app?
bvsbutthd101 said:
So this morning I got an update to fix the voLTE bug. I'm unlocked with twrp installed and rooted. Just for the sake of experimenting I tried installing it. Well that didn't work. Just gets stuck in twrp recovery and you have to power the phone off completely to get it to boot. I guess my question (even though it's a little early) is there a way to install the update without reverting back to stock?
Click to expand...
Click to collapse
If you have systemless supersu, you should just be able to apply the update after reverting to stock recovery.
So I found where the zip downloads. I wonder what flashing it in twrp would do?
EDIT: Here's the link to the zip and I've put it in the OP.
https://drive.google.com/open?id=0BxqNotAWlwLUQ1Fzcjc2YXd4QzA
glight0 said:
My device BL unlocked, TWRP installed and rooted with magisck.
I'm getting the update notification and splash screens several times daily.
Anyone rooted try installing the update with Flashfire app?
Click to expand...
Click to collapse
OK, so I tried flashing recovery.img from stock firmware build 33. But the OTA update will not install, instead I get an error after downloading and rebooting (red triangle at recovery mode).
So I tried fully reverting to stock firmware but I decided to skip over erasing userdata. Afterward the OTA downloaded and installed successfully. Keeping userdata does not seem to have caused an issue.
My problem now though is how to get root back without having to wipe userdata after re-flashing TWRP.
Or is this not possible and if I want to root I must first wipe userdata so that TWRP can read internal memory?
bvsbutthd101 said:
So I found where the zip downloads. I wonder what flashing it in twrp would do?
EDIT: Here's the link to the zip and I've put it in the OP.
https://drive.google.com/open?id=0BxqNotAWlwLUQ1Fzcjc2YXd4QzA
Click to expand...
Click to collapse
Just tried flashing it with TWRP and no luck:
Verifying current system....
E3002: Package expects build thumbprint of 7.0/NPN25.137-35/37:user/release-keys or 7.0/NPN25.137-33/35:user/release-keys; this device has .
Updated process ended with ERROR: 7
which doesn't make much sense since I rooted the stock ROM (Build number reads NPN25.137-33).
If your using a custom recovery flash the stock recovery, then go to the stock recovery and using your computer flash using adb sideboard command. I assume you already know how to do this. Hope that helps.
gghose said:
Just tried flashing it with TWRP and no luck:
Verifying current system....
E3002: Package expects build thumbprint of 7.0/NPN25.137-35/37:user/release-keys or 7.0/NPN25.137-33/35:user/release-keys; this device has .
Updated process ended with ERROR: 7
which doesn't make much sense since I rooted the stock ROM (Build number reads NPN25.137-33).
Click to expand...
Click to collapse
I'm stuck in the same boat... no idea how to flash the stock recovery and sideboard, what that even means, or if that would break root. I just followed the step-by-step "how to root" video when I first got the phone
There's a workaround to disable the "advanced LTE" or whatever it was called, so I did that. But in the meantime until a more "user friendly" means of updating is available, is there a way I can get rid of this nag screen? Way back on an earlier device (Samsung Charge?) I remember manually editing a "build.prop" file or something to match the latest version so I wouldn't keep getting the software update nag. Is there something that will do the same here, or is there a system app I can freeze in TiB?
My best guess is freezing "Moto Actions 03.022.1.4-N" because it's showing "(updated)" on the side.
rellim113 said:
I'm stuck in the same boat... no idea how to flash the stock recovery and sideboard, what that even means, or if that would break root. I just followed the step-by-step "how to root" video when I first got the phone .
Click to expand...
Click to collapse
What he means is you need to download the stock rom, unzip it, then boot phone to bootloader mode and connect to PC. Then flash the recovery.IMG from the stock rom folder with command prompt:
Fastboot flash recovery recovery.img
Then you can on the phone tell it to boot to recovery mode. This will be a screen with Android on his back and the words NO Command on the bottom. Then plug to PC and use adb command to sideload the update zip like this:
adb sideload [nameofupdatefile].Zip
glight0 said:
What he means is you need to download the stock rom, unzip it, then boot phone to bootloader mode and connect to PC. Then flash the recovery.IMG from the stock rom folder with command prompt:
Fastboot flash recovery recovery.img
Then you can on the phone tell it to boot to recovery mode. This will be a screen with Android on his back and the words NO Command on the bottom. Then plug to PC and use adb command to sideload the update zip like this:
adb sideload [nameofupdatefile].Zip
Click to expand...
Click to collapse
Strange, reflashed the stock recovery and adb can't see it (adb devices returns nothing). And when trying to install it via the normal OTA way, the stock recovery tries to install but ends with an error.
That's what happened to me when I tried reverting to stock recovery and then trying to install update from phone Settings app.
I ended up having to revert to stock rom to get ota to apply with settings app. But now I am trying to root again but after installing TWRP data is encrypted again. So looks like I will have to wipe data before re-rooting.
Just got a brand new 2017 Shield. Got in to fast boot using "adb reboot bootloader" as I don't have a game controller and I was unable to get a usb keyboard or any other controller to work. Booted to latest TWRP and installed SuperSU. Now it doesn't boot. I'm just getting a bunch of warnings and errors regarding being unlocked and the system being modified. Then, I just get a black screen. Did I just screw up? Is there new update that I installed with DM verity enabled and this is causing it to stop booting?
Either way, it does not boot far enough for me to get in via ADB and I can't get back in to fastboot. Any other things I can try to get into fastboot? Assuming I can, what's the latest image I will need to reflash back to stock?
Any assistance/guidance appreciated. Thanks. :fingers-crossed:
Update: I was able to find a KB that works to get in to fastboot mode. So that's working. Is the latest development image from NVidia going to work for me?
Update2: So I just went for it since I got inpatient waiting for responses. Back up and running after flashing the latest developer image. Now to get SuperSU or Magisk working?
Final Update: It looks like I used a slightly older SuperSU (2.79) installer which I'm guessing broke DM verity (or something worse). After installing TWRP (permanently), I sideloaded the new SuperSU (2.82 SR3) zip and everything worked just peachy.
joojoobee666 said:
Just got a brand new 2017 Shield. Got in to fast boot using "adb reboot bootloader" as I don't have a game controller and I was unable to get a usb keyboard or any other controller to work. Booted to latest TWRP and installed SuperSU. Now it doesn't boot. I'm just getting a bunch of warnings and errors regarding being unlocked and the system being modified. Then, I just get a black screen. Did I just screw up? Is there new update that I installed with DM verity enabled and this is causing it to stop booting?
Either way, it does not boot far enough for me to get in via ADB and I can't get back in to fastboot. Any other things I can try to get into fastboot? Assuming I can, what's the latest image I will need to reflash back to stock?
Any assistance/guidance appreciated. Thanks. :fingers-crossed:
Update: I was able to find a KB that works to get in to fastboot mode. So that's working. Is the latest development image from NVidia going to work for me?
Update2: So I just went for it since I got inpatient waiting for responses. Back up and running after flashing the latest developer image. Now to get SuperSU or Magisk working?
Final Update: It looks like I used a slightly older SuperSU (2.79) installer which I'm guessing broke DM verity (or something worse). After installing TWRP (permanently), I sideloaded the new SuperSU (2.82 SR3) zip and everything worked just peachy.
Click to expand...
Click to collapse
Ummm sooner or later you will probably run into problems by installing twrp permanently, really all you had to do was fastboot twrp and install the newer supersu
jionny said:
Ummm sooner or later you will probably run into problems by installing twrp permanently, really all you had to do was fastboot twrp and install the newer supersu
Click to expand...
Click to collapse
What kind of issues do you expect I will have? So far it's been fine, multiple reboots and what not as I was getting everything setup. Worse case scenario I just need to fastboot recovery and or boot?
joojoobee666 said:
What kind of issues do you expect I will have? So far it's been fine, multiple reboots and what not as I was getting everything setup. Worse case scenario I just need to fastboot recovery and or boot?
Click to expand...
Click to collapse
Look around the nvidia shield tv forum and you will see multiple people have problems when they update when they permanent install. its one reason why you don't see any tutorials of permanent install of twrp all tutorials instruct fastboot install
jionny said:
Look around the nvidia shield tv forum and you will see multiple people have problems when they update when they permanent install. its one reason why you don't see any tutorials of permanent install of twrp all tutorials instruct fastboot install
Click to expand...
Click to collapse
Ok, thanks for the info. I did see some people that were saying they had issues but nothing I saw was really clear initially. However, after some further research I see the main issue is if an update tried to apply with TWRP installed, things can go hay-wire. I'll go ahead and remove. Just sucks that I can't remotely use TWRP. Some of my devices are nowhere near a PC. I just feel naked without it installed.
Edit: I downgraded to the latest image from NVidia, installed the latest OTA and re-rooted again, sans TWRP.