Hey guys!
Yesterday i have flashed cloudyg2 3.1 on my phone. Than today i have tried to restore my stock backup. I have restore it but than the phone doesn't show up the sim. So i have decided to flash kdz. I have flash a kdz with flashtool but now the phone doesnt boots up. It stays on LG logo. What should i do? Thanks
abdulkadiro said:
Hey guys!
Yesterday i have flashed cloudyg2 3.1 on my phone. Than today i have tried to restore my stock backup. I have restore it but than the phone doesn't show up the sim. So i have decided to flash kdz. I have flash a kdz with flashtool but now the phone doesnt boots up. It stays on LG logo. What should i do? Thanks
Click to expand...
Click to collapse
Well you should clearly use a descriptive title as I got into this thread without any expectations.
Anyhow, depending on the rom you tried to restore, you might have ended up with LP modem (from cloudy 3.1) on a kitkat rom... or not, considering you didn't really provide much information and I have no idea what variant are you talking about.
Related
Hi everyone,
I am having issues with this phone of mine. Here is a background of it:
My phone is rooted and is running rayglobe rom. I tried updating the update that it gave me and made me stuck in bootloop.
Now I downloaded another rom, which I don't remember since this happened december 2013. after flashing, it does not boot and does not make me go to TWRP anymore. Now I tried using download mode to restore my phone. but eveytime I try to flash (using the 2 methods I saw in the thread), either it hangs at 49% or the other one does not start flashing because it says I have inconsistent dll? I downloaded a D802 stock rom and tried flashing via download mode and it says that I have different model (F380K). Now I tried downloading a dll and F380K stock rom, but won't allow me because it says that my phone is D802. But when I go to download mode it is korean and it says F380K.
I think I have flashed a korean rom before which made this incident happen, but do you have any idea how I can restore this?
Thank you all in advance.
If this was me, I would do a factory reset.
sounds like you should go back to stock firmware.
http://forum.xda-developers.com/showthread.php?t=2432476
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=xxxxxxxxxxxxxxxxxx<YOUR IMEI NO.
First check what exactly phone model in Internet Browser. Then download TOT and flash back to stock.
xaneybert said:
Hi everyone,
I am having issues with this phone of mine. Here is a background of it:
My phone is rooted and is running rayglobe rom. I tried updating the update that it gave me and made me stuck in bootloop.
Now I downloaded another rom, which I don't remember since this happened december 2013. after flashing, it does not boot and does not make me go to TWRP anymore. Now I tried using download mode to restore my phone. but eveytime I try to flash (using the 2 methods I saw in the thread), either it hangs at 49% or the other one does not start flashing because it says I have inconsistent dll? I downloaded a D802 stock rom and tried flashing via download mode and it says that I have different model (F380K). Now I tried downloading a dll and F380K stock rom, but won't allow me because it says that my phone is D802. But when I go to download mode it is korean and it says F380K.
I think I have flashed a korean rom before which made this incident happen, but do you have any idea how I can restore this?
Thank you all in advance.
Click to expand...
Click to collapse
I faced similar problem with D800. I had the correct dll and the firmware but it failed saying my phone model was different (I think its because I tried the "upgrade recovery" option on the LG PC software by selecting a different model).
My phone was passing the LG screen and stuck at android boot screen.
What I did:
Pushed a kitkat based rom for D800 to sdcard using adb on Linux (on windows adb failed to recognise the device).
Then adb reboot recovery and flashed the rom.
Then I was able to flash the factory image.
So i have a jdi panel d800 g2 ( iwas on 20k). i rooted with ioroot and installed TWRP then flashed a jdi KK kernel to avoid white lines. Then i followed the steps to install g3 rom. cleared memory etc and flashed baseband. when i flashed the g3 rom it seemed to go well and then asked me to set it up by choosing my carrier and such. when it was finished it asked me to reboot and then proceeded to get stuck on the lg logo.. so i flashed baack to 20c and got the ota update to 20y did everything again except install the Baseband and rom... how can i get it on right? couldnt find advice on cloudyg3 rom thread... any help appreciated!
Hey guys, I've been having some issues booting into recovery since flashing the stock rom back onto my LG G2 D802.
My phone had been rooted and was using TWRP as it's recovery tool. However, I wanted to unroot and go back to stock on this phone so found a guide in order to do so.
I followed the guide exactly as it is in this thread and completed 100% but now when trying to go into recovery mode nothing happens, the screen just goes black and just reboots itself.
Does anyone know if and how I can get the stock recovery back onto my phone?
Thank you in advance
so got d802, rooted, used autorec for twrp, flashed cloudy 3.3 and now have the dreaded black screen,
managed to get into TWRP but pc not recognising phone?
what can i do, i presumed because phone was on kitkat it automatically had a kitkat baseband....
on further reading infact it does not, cant find any of the basebands to flash it,,
managed to get OTG working
any help
cheers
sutty86 said:
so got d802, rooted, used autorec for twrp, flashed cloudy 3.3 and now have the dreaded black screen,
managed to get into TWRP but pc not recognising phone?
what can i do, i presumed because phone was on kitkat it automatically had a kitkat baseband....
on further reading infact it does not, cant find any of the basebands to flash it,,
managed to get OTG working
any help
cheers
Click to expand...
Click to collapse
you were on kit kat and flashed a stock based LP rom ? not sure but didnt you have to be on stock LP then flash cloudy.
maybe flash a KDZ theres flasjable ones as zip for LP.
what i done from kitkat is
root/autorec. update twrp 2.8.7.3/bootstacks 5.02. bumped KK. you know you must reboot recovery into recovery again from recovery to take effect. during update of twrp and bootsacks then flash LP KDZ stock. then just wipe and flash cloudy.
Cheers managed to flash cloudy g2.2 over it,
Gps is terrible though
Hi everyone, I perhaps kill my old lg g2 [R.I.P], but maeby you find a solution for that. This is my story.
Today I want to install MIUI 8 so i download one .zip file from this forum. Like always i do full wipe and then install ROM. everything be normal, ROM be installed and i started setting my new OS. After few sec, i can't go thought the setting cuz there be a error. I decided to reinstall system one more time, and this is that moment when I know I f**k up. Off my phone, wanna on TWRP and then i see i can't do anything, phone stuck in LG logo.
Any ida what to do?
Thanks for all ideas.
Maybe go back to a stock ROM and start over? This thread may be helpful in getting back to stock: https://forum.xda-developers.com/showthread.php?t=2432476
The thread helped me go from Cloudy 3.2 to stock MM on a d802.
audit13 said:
Maybe go back to a stock ROM and start over? This thread may be helpful in getting back to stock: https://forum.xda-developers.com/showthread.php?t=2432476
The thread helped me go from Cloudy 3.2 to stock MM on a d802.
Click to expand...
Click to collapse
Right so I'm facing two problems with going back to stock method:
1) as i said, the phone won't boot up on flashing ANY version of d802 firmware (I've observed that in lg flash tool, where you flash tot files, shows that the phone's model number is d802at. So I'll try flashing a d802at fw for the last time and see if it works)
2) i try to flash an ls980 fw, the flash tool gives a model number error. (If flashing d802at fw doesn't work, then i guess i have to modify the hex data in the ls980zve.tot file and force flash it on the phone)
I'll give you an update after something has happened.
@ audit13 it is work!!! Thanks for your help! And I have one last question, I still have root acces and TWRP installed?
Glad it worked
You should be back to stock recovery and no root.