Here's the OTA zip extracted from 5.1 XT1527. Fully unmodified.
It patches a lot of system apps, modem and gpt.
https://mega.nz/#!ixpQyRYI!OSIzlz8OOp3VChQGSkOW-f9gdy87g6cGQZiE4MeaUrI
PsyClip-R said:
Here's the OTA zip extracted from 5.1 XT1527. Fully unmodified.
It patches a lot of system apps, modem and gpt.
https://mega.nz/#!ixpQyRYI!OSIzlz8OOp3VChQGSkOW-f9gdy87g6cGQZiE4MeaUrI
Click to expand...
Click to collapse
asks encryption key ... it is impossible to download without introducing
---------- Post added at 12:04 ---------- Previous post was at 12:02 ----------
ENRIQUEMM said:
asks encryption key ... it is impossible to download without introducing
Click to expand...
Click to collapse
Now if, after modifying the link.
Thank you
ENRIQUEMM said:
Now if, after modifying the link.
Thank you
Click to expand...
Click to collapse
Yep, I've fixed that.
Let me know if you will install it.
You patch this update yourself ?
I am leery about running it.. it patches everything you can imagine.
xpmule said:
You patch this update yourself ?
I am leery about running it.. it patches everything you can imagine.
Click to expand...
Click to collapse
Nope. Cuz I'm usin' XT1527 firmware on XT1524. So my recovery and modem are different. Thus I can't install this update.
It's untouched. Factory package, extracted from /cache partition.
ahh ok thanks
i seen it downloaded OTA to that folder on my XT1527 device too.
what about Bootloader concerns guys ?
people are talking about that on the stock firmware topic
and they linked to this topic..
and i guess just open TWRP and flash it then right ?
xpmule said:
ahh ok thanks
i seen it downloaded OTA to that folder on my XT1527 device too.
what about Bootloader concerns guys ?
people are talking about that on the stock firmware topic
and they linked to this topic..
and i guess just open TWRP and flash it then right ?
Click to expand...
Click to collapse
Actually You need fully untouched (factory origin) partitions, ie. recovery, firmware, radio, boot etc.
There shouldn't be any problem with unlocked bootloader.
if you need a stock phone then you have to use the ADB-Side Load method then right ?
and the release notes are vague from Moto
EDIT:
i can confirm the file posted on Mega is the same as the OTA update from Moto.
I got both just now and hex compared them.. using BeyondCompare (HEX)
xpmule said:
i can confirm the file posted on Mega is the same as the OTA update from Moto.
I got both just now and hex compared them.. using BeyondCompare (HEX)
Click to expand...
Click to collapse
Thanks for help. So now guys may download and flash without worries.
ya i guess i am running a different modem too.
hmm this is getting complicated hahah
at first i thought you could do a flash like i seen guys doing on a Moto G tutorial..
they backed up all with TWRP then installed stock recovery + stock firmware etc.
then connected to PC with adb fasttools and flashed it that way (have not used that method yet)
that means you put phone into fastboot connection mode and connect with stock recovery.
then the update is flashed over usb while the update is on your PC.
and in the tutorial the guy then re-flashed TWRP and restored back his data.
BUT !
This update patches every single stock apk and pretty much every aspect of the system.
including the modem !
so if you did restore your old modem then it's not patched.
and some of us have a 5.0.2 modem so hmmm
maybe it would be ok (security wise) if the 5.0.2 modem was stage fright patched too ?
When I Trying to INtall the update From TWRP got this error:
Processing OpenRecoveryScript file...
I:command is: 'install'
I:value is: '/storage/sdcard1/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Unable to mount '/usb_otg'
I:Actual block device: '', current file system: 'auto'
I:Unable to mount '/usb_otg'
I:Actual block device: '', current file system: 'auto'
I:Trying to find zip '/storage/sdcard1/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip' on '/data/media/0'...
I:Looking for zip at '/sdcard1/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Looking for zip at '/data/media/0/sdcard1/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Looking for zip at '/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Looking for zip at '/data/media/0/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Trying to find zip '/storage/sdcard1/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip' on '/external_sd'...
I:Looking for zip at '/sdcard1/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Looking for zip at '/external_sd/sdcard1/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Looking for zip at '/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Looking for zip at '/external_sd/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
Installing zip file '/external_sd/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
Installing '/external_sd/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
installing gptupgrade updater extensions
file_contexts path is present in /tmp/file_contexts
mount point :/system location: /dev/block/bootdevice/by-name/system , file system type :ext4script aborted: Package expects build fingerprint of motorola/surnia_retus/surnia_umts:5.1/LPI23.29-15/19:user/release-keys or motorola/surnia_retus/surnia_umts:5.1/LPI23.29-18.9/4:user/release-keys; this device has motorola/omni_surnia/surnia:5.1.1/LYZ28E/squid207132027:userdebug/test-keys.
Package expects build fingerprint of motorola/surnia_retus/surnia_umts:5.1/LPI23.29-15/19:user/release-keys or motorola/surnia_retus/surnia_umts:5.1/LPI23.29-18.9/4:user/release-keys; this device has motorola/omni_surnia/surnia:5.1.1/LYZ28E/squid207132027:userdebug/test-keys.
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/external_sd/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
E:Error installing zip file '/external_sd/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
Done processing script file
read what i said before.about "test-keys"
your phone was flagged.
the update knows you have custom content and refused the install
it seen you have root/super su or have a custom kernel or rom etc.
How to apply the update manually?
Hi,
I have the xt1524 bought from retail in Europe (Germany). I managed to upgrade it to stock xt1527 retus 5.1, but the stagefright update keeps on failling to install. I have the motorola drivers and adb and fastboot, also unlocked the bootloader. How can I apply this update manually?
Thanks in advance!
tomoff said:
Hi,
I have the xt1524 bought from retail in Europe (Germany). I managed to upgrade it to stock xt1527 retus 5.1, but the stagefright update keeps on failling to install. I have the motorola drivers and adb and fastboot, also unlocked the bootloader. How can I apply this update manually?
Thanks in advance!
Click to expand...
Click to collapse
You simply can't install this OTA on 1524 hardware.
I suppose you use 1524 modem and other partitions. The script updates every of these partitions.
At first it asserts partitions software, and of course it fails.
If only smb wills to modify the script.
jgomez-m said:
When I Trying to INtall the update From TWRP got this error:
Processing OpenRecoveryScript file...
I:command is: 'install'
I:value is: '/storage/sdcard1/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Unable to mount '/usb_otg'
I:Actual block device: '', current file system: 'auto'
I:Unable to mount '/usb_otg'
I:Actual block device: '', current file system: 'auto'
I:Trying to find zip '/storage/sdcard1/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip' on '/data/media/0'...
I:Looking for zip at '/sdcard1/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Looking for zip at '/data/media/0/sdcard1/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Looking for zip at '/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Looking for zip at '/data/media/0/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Trying to find zip '/storage/sdcard1/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip' on '/external_sd'...
I:Looking for zip at '/sdcard1/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Looking for zip at '/external_sd/sdcard1/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Looking for zip at '/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
I:Looking for zip at '/external_sd/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
Installing zip file '/external_sd/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
Installing '/external_sd/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
installing gptupgrade updater extensions
file_contexts path is present in /tmp/file_contexts
mount point :/system location: /dev/block/bootdevice/by-name/system , file system type :ext4script aborted: Package expects build fingerprint of motorola/surnia_retus/surnia_umts:5.1/LPI23.29-15/19:user/release-keys or motorola/surnia_retus/surnia_umts:5.1/LPI23.29-18.9/4:user/release-keys; this device has motorola/omni_surnia/surnia:5.1.1/LYZ28E/squid207132027:userdebug/test-keys.
Package expects build fingerprint of motorola/surnia_retus/surnia_umts:5.1/LPI23.29-15/19:user/release-keys or motorola/surnia_retus/surnia_umts:5.1/LPI23.29-18.9/4:user/release-keys; this device has motorola/omni_surnia/surnia:5.1.1/LYZ28E/squid207132027:userdebug/test-keys.
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/external_sd/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
E:Error installing zip file '/external_sd/Blur_Version.23.11.15.surnia_retus.retus.en.US.zip'
Done processing script file
Click to expand...
Click to collapse
Who said OTA might be installed in TWRP?
AFAIK stock recovery required.
PsyClip-R said:
Who said OTA might be installed in TWRP?
AFAIK stock recovery required.
Click to expand...
Click to collapse
I could solve it, after all, I just reinstall a stock ROM and delete: cache, davilk cache, and Internal (user data)
then I had to install TWRP again
I guess we need to remove the modem patches from the update to allow installation on XT1524 ?
Interrested too : the update did download to my phone.
Got the .zip from /cache and waiting to update the script
napo7 said:
I guess we need to remove the modem patches from the update to allow installation on XT1524 ?
Interrested too : the update did download to my phone.
Got the .zip from /cache and waiting to update the script
Click to expand...
Click to collapse
Not sure if the script will pass the signature validation.
Though there's another way to update. Apply patches to files one by one, including boot.img, gpt.mbn and flash these patched versions on top of current fw. Excluding modem.
But this might be dangerous due to gpt.mbn flashing.
So guys I recently applied OTA patch to boot.img (i.e. kernel). It's relatively safe to boot it, but there's no 100% guarantee it will work as expected. Who knows what did Moto changed in there.
https://mega.nz/#!bsowHYTa!4sOxRwngUHLFyi8gAb1ZxVpitqCN24DkyMRnF3aZa58
If You have bootloader unlocked, TWRP and XT1527 firmware on Your XT1524 (or Regular 1527 without Stagefright patch), try to load it without flashing.
fastboot boot boot.img
Don't forget about the full backup.
Warning! I'm not responsible for damages you might made to your device. You're doing it by youself, and to your own responsibility
I have xt1527 android 6.0 stock and bootloader loock and stock recovery
i cant' install this update.zip?
I cant flash any ROM after wiped "system" I always get this error on log
Installing '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'...
Checking for MD5 File...
Skipping MD5 check: no MD5 file found
This package is for device: a500cg,a501cg,cm_a500cg,cm_a501cg,ASUS_T00F,ASUS_T00j,a600cg,cm_a600cg,ASUS_T00G; this device is .
E : Error executing updater binary in zip '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'
Error flashing zip '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'
Updating partition details...
...done
what should i do now?
WInEns said:
I cant flash any ROM after wiped "system" I always get this error on log
Installing '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'...
Checking for MD5 File...
Skipping MD5 check: no MD5 file found
This package is for device: a500cg,a501cg,cm_a500cg,cm_a501cg,ASUS_T00F,ASUS_T00j,a600cg,cm_a600cg,ASUS_T00G; this device is .
E : Error executing updater binary in zip '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'
Error flashing zip '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'
Updating partition details...
...done
what should i do now?
Click to expand...
Click to collapse
try this rr remix 569 http://forum.xda-developers.com/zenfone-5/development/rom-resurrection-remix-mm-5-6-7-t3357331
WInEns said:
I cant flash any ROM after wiped "system" I always get this error on log
Installing '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'...
Checking for MD5 File...
Skipping MD5 check: no MD5 file found
This package is for device: a500cg,a501cg,cm_a500cg,cm_a501cg,ASUS_T00F,ASUS_T00j,a600cg,cm_a600cg,ASUS_T00G; this device is .
E : Error executing updater binary in zip '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'
Error flashing zip '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'
Updating partition details...
...done
what should i do now?
Click to expand...
Click to collapse
Go the 'Reboot' section in Recovery mode and reboot your recovery. Try flashing again after rebooting your recovery. Hope it helps!
ingeniousretard said:
Go the 'Reboot' section in Recovery mode and reboot your recovery. Try flashing again after rebooting your recovery. Hope it helps!
Click to expand...
Click to collapse
I tried this, and still no luck.
paktepu said:
try this rr remix 569 http://forum.xda-developers.com/zenfone-5/development/rom-resurrection-remix-mm-5-6-7-t3357331
Click to expand...
Click to collapse
Thanks for the suggestion. I haven't download it yet but i tried to flash resurrection remix v5.5.8 and still failed. This is the log:
E: Unknown File System: 'osip'
E: Unknown File System: 'osip'
E: Unknown File System: 'osip'
E: Unable to find partition size for '/misc'
E: Unable to find partition size for '/splashscreen'
Updating partition details...
...done
Full SElinux support is present.
E; Unable to set bootloader message
MTP Enabled
Installing '/external_sd/Resurrection-Remix-LP-v5.5.8-20151113-a500cg.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
This package is for device: a500cg, a501cg, cm_a500cg, cm_501cg, ASUS_T00F, ASUS_T00J, a600cg, cm_a600cg, ASUS_T00G; this device is .
E: Error executing updater binary in zip '/external_sd/Resurrection-Remix-LP-v5.5.8-20151113-a500cg.zip
Error flashing zip 'external_sd/Resurrection-Remix-LP-v5.5.8-20151113-a500cg.zip'
Updating partition details...
...done
WInEns said:
Thanks for the suggestion. I haven't download it yet but i tried to flash resurrection remix v5.5.8 and still failed. This is the log:
E: Unknown File System: 'osip'
E: Unknown File System: 'osip'
E: Unknown File System: 'osip'
E: Unable to find partition size for '/misc'
E: Unable to find partition size for '/splashscreen'
Updating partition details...
...done
Full SElinux support is present.
E; Unable to set bootloader message
MTP Enabled
Installing '/external_sd/Resurrection-Remix-LP-v5.5.8-20151113-a500cg.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
This package is for device: a500cg, a501cg, cm_a500cg, cm_501cg, ASUS_T00F, ASUS_T00J, a600cg, cm_a600cg, ASUS_T00G; this device is .
E: Error executing updater binary in zip '/external_sd/Resurrection-Remix-LP-v5.5.8-20151113-a500cg.zip
Error flashing zip 'external_sd/Resurrection-Remix-LP-v5.5.8-20151113-a500cg.zip'
Updating partition details...
...done
Click to expand...
Click to collapse
For that rr, use twrp 3.0
http://forum.xda-developers.com/showthread.php?t=3355749
Sent from my ASUS_T00F using XDA-Developers mobile app
WInEns said:
I cant flash any ROM after wiped "system" I always get this error on log
Installing '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'...
Checking for MD5 File...
Skipping MD5 check: no MD5 file found
This package is for device: a500cg,a501cg,cm_a500cg,cm_a501cg,ASUS_T00F,ASUS_T00j,a600cg,cm_a600cg,ASUS_T00G; this device is .
E : Error executing updater binary in zip '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'
Error flashing zip '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'
Updating partition details...
...done
what should i do now?
Click to expand...
Click to collapse
Flash the latest custom recovery and give a try (3.0 by xanwar)
Boomshiva said:
Flash the latest custom recovery and give a try (3.0 by xanwar)
Click to expand...
Click to collapse
try flashing latest twrp 3.0.4, its more stable and did'nt experience random shut during rom flash..tq
azackforum said:
try flashing latest twrp 3.0.4, its more stable and did'nt experience random shut during rom flash..tq
Click to expand...
Click to collapse
Thanks bro . But I don't have any issues with recovery every great here .
WInEns said:
I cant flash any ROM after wiped "system" I always get this error on log
Installing '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'...
Checking for MD5 File...
Skipping MD5 check: no MD5 file found
This package is for device: a500cg,a501cg,cm_a500cg,cm_a501cg,ASUS_T00F,ASUS_T00j,a600cg,cm_a600cg,ASUS_T00G; this device is .
E : Error executing updater binary in zip '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'
Error flashing zip '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'
Updating partition details...
...done
what should i do now?
Click to expand...
Click to collapse
Ur trouble isn't due vy any TWRP version but by yourself.
Bcuz u wiped system parttition, then certainly file build.prop's gone too. So, when TWRP want to get name of device, it can't, then it will cancel flash process. To fix, i suggest u some method:
1. Set "ro.product.device" manually
- Use terminal builtin of TWRP, type follow:
Code:
setprop ro.product.device a500cg
setprop ro.build.product a500cg
- Or, if use adb shell from ur PC:
Code:
adb shell
then type 2 lines as above
After that, choice & flash rom as normaln
2. Edit updater-script
- Open Rom zip via Winrar/7z (Windows) or file roller...(Linux)
- Goto META-INF/com/google/android, u'll see 2 files: update-binary & updater-script.
- Open file "updater-script" via any editor program u have (For Windows, use Notepad++ ONLY), find and delete any line contains "assert" word. On stock, first 10 lines, while custom rom just 1, or 2 lines, in generally.
- When done, save your file, choose "Yes" when a popup promt u want to update your zip.
- Push your new zip to device then choice it to flash
3. Find then flash any "system.img" for your device first via fastboot, then reboot to recovery, then u know what have to do, right :laugh:
4. Use Asus Flash tool & "raw" file. But this's a longest & hardest way, so avoid it anyway.
Hope can help u. Goodluck
quanganh2627 said:
Ur trouble isn't due vy any TWRP version but by yourself.
Bcuz u wiped system parttition, then certainly file build.prop's gone too. So, when TWRP want to get name of device, it can't, then it will cancel flash process. To fix, i suggest u some method:
1. Set "ro.product.device" manually
- Use terminal builtin of TWRP, type follow:
Code:
setprop ro.product.device a500cg
setprop ro.build.product a500cg
- Or, if use adb shell from ur PC:
Code:
adb shell
then type 2 lines as above
After that, choice & flash rom as normaln
2. Edit updater-script
- Open Rom zip via Winrar/7z (Windows) or file roller...(Linux)
- Goto META-INF/com/google/android, u'll see 2 files: update-binary & updater-script.
- Open file "updater-script" via any editor program u have (For Windows, use Notepad++ ONLY), find and delete any line contains "assert" word. On stock, first 10 lines, while custom rom just 1, or 2 lines, in generally.
- When done, save your file, choose "Yes" when a popup promt u want to update your zip.
- Push your new zip to device then choice it to flash
3. Find then flash any "system.img" for your device first via fastboot, then reboot to recovery, then u know what have to do, right :laugh:
4. Use Asus Flash tool & "raw" file. But this's a longest & hardest way, so avoid it anyway.
Hope can help u. Goodluck
Click to expand...
Click to collapse
After many failed attempts , I finally decided to go back to the original stock ROM . Maybe I'll try again when there was a bugless custom ROM .
Thanks anyway for all your efforts , it will definitely be useful in the future.
quanganh2627 said:
Ur trouble isn't due vy any TWRP version but by yourself.
Bcuz u wiped system parttition, then certainly file build.prop's gone too. So, when TWRP want to get name of device, it can't, then it will cancel flash process. To fix, i suggest u some method:
1. Set "ro.product.device" manually
- Use terminal builtin of TWRP, type follow:
Code:
setprop ro.product.device a500cg
setprop ro.build.product a500cg
- Or, if use adb shell from ur PC:
Code:
adb shell
then type 2 lines as above
After that, choice & flash rom as normaln
2. Edit updater-script
- Open Rom zip via Winrar/7z (Windows) or file roller...(Linux)
- Goto META-INF/com/google/android, u'll see 2 files: update-binary & updater-script.
- Open file "updater-script" via any editor program u have (For Windows, use Notepad++ ONLY), find and delete any line contains "assert" word. On stock, first 10 lines, while custom rom just 1, or 2 lines, in generally.
- When done, save your file, choose "Yes" when a popup promt u want to update your zip.
- Push your new zip to device then choice it to flash
3. Find then flash any "system.img" for your device first via fastboot, then reboot to recovery, then u know what have to do, right :laugh:
4. Use Asus Flash tool & "raw" file. But this's a longest & hardest way, so avoid it anyway.
Hope can help u. Goodluck
Click to expand...
Click to collapse
Thank you bro.... I used your first option step and flashing rom successful.:good::good:
WInEns said:
After many failed attempts , I finally decided to go back to the original stock ROM . Maybe I'll try again when there was a bugless custom ROM .
Thanks anyway for all your efforts , it will definitely be useful in the future.
Click to expand...
Click to collapse
Hello. Actually I am having the very same problem. Could you please guide me how to install the stock rom. Thank you
Thanks man ... you are a legend ...just fixed my phone i erased my os and no backup was available .. thanks a lot
Flashing system.img should help too, but you alredy fixed it.
Try to full wipe and reboot recovery mode
WInEns said:
I cant flash any ROM after wiped "system" I always get this error on log
Installing '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'...
Checking for MD5 File...
Skipping MD5 check: no MD5 file found
This package is for device: a500cg,a501cg,cm_a500cg,cm_a501cg,ASUS_T00F,ASUS_T00j,a600cg,cm_a600cg,ASUS_T00G; this device is .
E : Error executing updater binary in zip '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'
Error flashing zip '/external_sd/Cyanogenmod-12.1-Zenfone-5-TWRP.zip'
Updating partition details...
...done
what should i do now?
Click to expand...
Click to collapse
Try.
1. Full wipe.
2. *Important* Reboot Recovery Mode (select menu in twrp).
3. Install > ROM > Gapps > Supersu .
4. Reboot system.
it worked
ShOgYzzz said:
Try.
1. Full wipe.
2. *Important* Reboot Recovery Mode (select menu in twrp).
3. Install > ROM > Gapps > Supersu .
4. Reboot system.
Click to expand...
Click to collapse
Thanks dude you saved me
Hi Folks,
I am new to rooting and struggling with a problem. I have an old zenfone 5(ASUS_T00J) model. I am using custom rom BlurOS found in the below thread:
https://forum.xda-developers.com/zenfone-5/development/rom-bluros-version-1-0-zenfone-5-t3619058
I am trying to flash Magisk from TWRP recovery but it's failing with below error:
E: Unknown File System: 'osip'
E: Unknown File System: 'osip'
E: Unknown File System: 'osip'
E: Invalid Block device on '/dev/block/zram0
none
swap
defaults
zramsize=67108864
', 'swap', 36
Updating partition details..
...done
Full SELinux support is present.
MTP Enabled
Installing '/sdcard/Download/Magisk-v20.4(20400).zip'..
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
**********************
Magisk 20.4 Installer
**********************
- Mounting /system
- Target Image: /dev/block/by-name/boot
- Device platform: x86
- Constructing environment
- Adding addon.d survival script
E: Error executing updater binary in zip '/sdcard/download/Magisk-v20.4(20400).zip'[/QUOTE]
Error flashing zip '/sdcard/download/Magisk-v20.4(20400).zip'
Updating partition details...
...done
Updatrer Scripts are in below Google Drive Location:
https://drive.google.com/file/d/1SdtXdgB-iCB1X5PL3OCsZLrcUT6WlRzX/view?usp=sharing (Updater Script)
https://drive.google.com/file/d/1X2lupRfMUj-n5pRx2c0h0NQHUvfOXJAP/view?usp=sharing (Updater Binary)
Steps followed by me:
1. Installed latest Magisk manager from GitHub
2. Downloaded the latest zip file prompted by Manager
3. Reboot in TWRP recovery
4. Flashed the newly downloaded zip file
Appologies in advance if this is not the right forum or I have violated any guidelines. Let me know if you need any more details from my side. Thanks in advance.
Update
The issue still remains. Tried to find solutions online. Below methods were suggested. Since, I am new to this, might have tried something silly in the process.
Method 1:
Flash the Rom boot image via TWRP
Result: Did not prompt to provide any partition but Failed with error 'No Partition selected for flashing'. Updated the TWRP to 3.2.3 and tried the same thing again. This time prompted for a partition but no option was available that I could provide there and failed with the same error.
Method 2:
Patching the Boot image of my ROM through magisk patch
Result: Extracted the boot image for BlurOS Custom rom and tried to patch it through magisk Manager. Installation failed with 'Unable to repack boot image'.
Since I updated the TWRP, tried to flash the magisk zip file hoping for some other error (at least). It failed with below error message:
Installing zip file '/sdcard/Download/Magisk-v20.4.zip'
Checking for digest file...
Skipping Digest check: No digest file found
*************************
Magisk 20.4 Installer
*************************
- Mounting /system
! Unable to detect target image
- Unmounting partitions
Updater process ends with error: 1
Error Installing zip file
Updating partition details...
... done
Kindly let me know if you guys have any pointers. Any leads will be appreciated.
Magisk is unable to patch x86 boot.img's, so you have to use "android image kitchen"
Magisk patches Ramdisk file so you have to do:
move x86 ramdisk to ARM boot.img
Patch it via magisk
move patched ramdisk back to x86 boot.img
You can try boot.img's that I made for RR and Lineage in my thread. They are pre-patched with magisk 20.4
Anyways, is BlurOS better than lineage or RR ?
Hi,
I am trying to install the latest Lineage version on my Samsung Nexus 10 via twrp, but so far it always immediately fails with
Error E1001: Failed to update system image.
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/lineage-17.1-20220318-UNOFFICIAL-manta.zip'
I tried wiping the entire system, cache and all and I tried both the adb push method and sideloading adb and they all produce the exact same error.
This is my first time doing this type of thing, so any help would be greatly appreciated.
P.S. I am currently running Windows 10, but could boot into a Linux Live Medium if that would be useful.
Edit: I was following this tutorial for the setup.
I'm facing exactly the same issue here with the installation of `lineage-17.1-20220919-UNOFFICIAL-manta.zip` file.
I'm currently on the latest original Google Android ROM flashed with `image-mantaray-lmy49j.zip` and want to update the system to the lineage OS as above.
I'm using TWRP v3.6.2_9.
What I did:
- uploaded `lineage-17.1-20220919-UNOFFICIAL-manta.zip` to `/sdcard` location;
- wiped out `dalvik-cache` and `cache` partitions;
- tried to install `lineage-17.1-20220919-UNOFFICIAL-manta.zip` as a single installation file;
Got this error. Here is an output from recovery.log:
Code:
Installing zip file '/sdcard/lineage-17.1-20220919-UNOFFICIAL-manta.zip'
Unmounting System...
I:Update binary zip
I:Extracting updater binary 'META-INF/com/google/android/update-binary'
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment not used in updater.
No path given to file labeling backend
selinux_android_file_context: Error getting file context handle (No such file or directory)
Warning: No file_contextsTarget: google/mantaray/manta:5.1.1/LMY49J/2640980:user/release-keysTarget: google/mantaray/manta:5.1.1/LMY49J/2640980:user/release-keys
Extracted file "/tmp/install/bin/backuptool.functions"
Extracted file "/tmp/install/bin/backuptool.sh"
Extracted 2 file(s)
about to run program [/tmp/install/bin/backuptool.sh] with 4 args
Backup/restore is not possible. Partition is probably empty
Patching system image unconditionally...
performing update
blockimg version is 4
maximum stash entries 0
creating stash /cache/recovery/4dd6bf24fbba9cc76c352f5c4cfaed0074be0244
535756800 bytes free on /cache (0 needed)
/cache/recovery/last_command doesn't exist.
erasing 3367 blocks
BLKDISCARD ioctl failed: Invalid argument
failed to execute command [erase 4,225950,228864,229947,230400]
new data receiver is still available after executing all commands.
Patching system image unconditionally...script aborted: E1001: Failed to update system image.
E1001: Failed to update system image.error: 1001
Updater process ended with ERROR: 7
I:Install took 0 second(s).
Error installing zip file '/sdcard/lineage-17.1-20220919-UNOFFICIAL-manta.zip'
Does anyone have any clue on what could be wrong here and why it fails?
unpack zip remove lines, then pack zip and try again. voilla
or utube eroor 7
I'd the same problem with twrp but does did successfully for version 16 installation. I tried the above listed way but failed again. Same thing happened even I unchecked the system in twrp before flashing again. Need expert to help fix the issue. Appreciate in advanced!
Cpluo said:
I'd the same problem with twrp but does did successfully for version 16 installation. I tried the above listed way but failed again. Same thing happened even I unchecked the system in twrp before flashing again. Need expert to help fix the issue. Appreciate in advanced!
Click to expand...
Click to collapse
Not enough space on /system. Resize the partition. After 17.1 is running for me. https://www.hovatek.com/forum/thread-32750.html
Thanks a lot Daniel! I will try your way.