Received the phone but was disappointed that the leather back has a blemish.
This is out of the box (brand new).
LG do not put a sticker to seal the retail box it comes in. I bought this product from amazon Italy (fulfilled by Amazon)
It is 815 model and has left a slightly bad taste since the blemish was the first thing I saw.
I think this may be a fault as the blemish is at point where the case will bend a little when you try to open it to access the battery.
Worth sharing it here...as I am not sure if anyone else has had this issue. (yet)
See pics.
**********This is my first post.********
I have one out the box but I didn't think it was worth mentioning nor is it as pronounced as yours.
Sent from my LG-H811 using Tapatalk
Your leather has character. Isn't that the point.
Sent from my VS986 using XDA Free mobile app
shawnten said:
Your leather has character. Isn't that the point.
Sent from my VS986 using XDA Free mobile app
Click to expand...
Click to collapse
Then LG should be using that tagline in their marketing
To be honest, I am tad bit bothered as it does give a bad feel when you see it out of the box.. I am not one of those who would buy a leather product when compared with another and select the one with blemish.....
at £60+ for a replacement case in UK(plus over a week delay).. you have to be kidding.
I know there is a deal in US currently from LG that offers 2 leather cases for $70 which is far more appealing to me.
The case is thin layer of leather infused on a plastic case and reading another thread some people are complaining that the leather is wearing off at corners already.
Now, that's shoddy and will see the prices of these accessories go down. I hope.
My red leather case has a gap right next to the camera. Not cool.?
Trimis de pe al meu LG-H815 folosind Tapatalk
Isn't this one of those 'personal features' LG calls the changes in the leather?
my rust color back is wearing a little or maybe just dying a little on the corners from my pocket but I kinda like the discoloration
If its real leather then there should be imperfections. Leather is skin you know, and I suspect your skin has imperfections as well. It looks to me like your leather was folded before gluing on the plastic, something that should go away after use and heat/humidity. Now, a gap next to the camera lens? That's an imperfection I would be worried about. Not so much an imperfection but a production snafu
Sent from my LG-H811 using Tapatalk
I have the tan T-Mobile edition and I have a few of those lines along with a little bubble on the leather. I took it to T-Mobile and they said that's how the leather is and I could pay a restocking fee if I wanted to exchange for a new phone since there wasn't anything wrong with the phone itself.
People, if you want a flawless back, you don't go with leather. I agree that a cutout problem is an issue but as far as imperfections go, that comes with organic matter. Anyway your leather back WILL show wear on the texture and color eventually. That's actually what people usually like about leather. Its imperfections and personal feel.
Between my friend and I we have 3 of the T-mobile brown leather backs and they all have a bit of character. Mine has a similar line.
Related
Ok so the OEM tmobile gel and plastic cases for the G2 are totally worthless. I've never seen a case made of such low quality and they want like 20 - 30 bucks for them.
i was curious to see if anyone bought anything good off ebay or elsewhere?
cheers
Refer to the Accessories section in the G2 sub section of this forum. You will find bunch of cases.
Im using a G1 foam sleeve, fits perfectly
Sent from my HTC Vision using XDA App
How can you say the T-mo gel is worthless? IMO, its the only one worth the money, and its only $16. It fits perfect, it feels good, and it protects GREAT.
Sent from my T-Mobile G2 using XDA App
I have both the gel case and the Bodyglove snap-on case.
I switch between them as the mood strikes me, but I'm somewhat more fond of the bodyglove case. The gel case adds somewhat more size to the phone and has a tendency to pull money/receipts/etc. along when I take it out of my pocket.
The bodyglove case is smaller, lighter, and allows access to the physical device buttons, whereas the gel case covers them and I find it sometimes difficult to hit the volume buttons, and exceedingly difficult to use the camera focus half-press.
I have the Protective Hard cover. Its a all clear plastic case with kickstand. It looks really nice and is a pain to take off.
papeshfoo said:
How can you say the T-mo gel is worthless? IMO, its the only one worth the money, and its only $16. It fits perfect, it feels good, and it protects GREAT.
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
it just looks and feels cheaper than dirt. not worth 5 bucks in my opinion. i've just seen cheap cases for other phones and they feel and look by far better than the tmo one.
I run mine naked.
kgold708 said:
I run mine naked.
Click to expand...
Click to collapse
LOL!
I have the Body Glove case. I like that it keeps it from slipping out of my hand or off the dash.
I have the t-mo gel case (the thicker $18 one) and I love it. I work next to a cell phone accessory kiosk and none of the other cases even come close to the protection AND quality of the t-mo one. Yeah it sucks when you need to pull it out of your pocket, but that can be said of any gel case.
I use the Maya case from Proporta. It's just a nice leather sleeve with a soft microfiber-like interior. I don't like having an actual case around my phone, but like to have it in the sleeve in my pocket to protect it from scratches and drops.
There is a nice body glove case w/out a clip and has a kinda disco pattern on it. Not bulky at all for being BG.
Sent from my T-Mobile G2 using XDA App
v8pwrdz28 said:
Im using a G1 foam sleeve, fits perfectly
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
+1
Picked one up on Ebay for $4 shipped and it fits great. Nice sleeve to protect the phone when its in my pockets from scratches. With a Skinomi screen protector on the screen, I know my phone is well protected.
I've got the Tmo metallic dark purple snap-on hard shell case. The stores were having (are still maybe?) a sale on accessories. I love the color more than I thought I would and it's definitely very good quality in my opinion. That being said, I wish it was a rubberized finish similar to the back battery cover of the G1, but I'll order a shell case like that soon.
I also made a "holder" for my G2 out of a Moleskine Memo Pocket (I left one pocket for my ID, credit cards, etc and cut the rest out carefully with an exacto knife then padded the interior with micro-suede). I just slip the phone in and it's protected from any other stuff rattling around in my purse. Or I can just add my ID and necessities for a quick carry-all.
I have both the bodyglove and the $16 case. The bodyglove case which protects the back half of the phone is great. But, the other front half of the case's frame is too thin and not durable. If you remove the case about once a day, the snaps will give out or just not catch anymore. Also the cutout to the camera makes it impossible for me to fit my finger in and focus the picture before taking it.(hold half way down to focus). The $16 case is perfect for me. There are no cut outs to the volume toggle or camera button so it allows you to apply slight force to focus then a full press of the button to take a picture. Also the bottom base of the front half wraps around the keypad for a more secure fit.
Take a look at this video I made, fast forward to 4:06 where I did a quick rant of the bodyglove case. Linked below. You'll see the sides of the case started to spread apart and peel off. The $16 which I've had on longer than the bodyglove does not give me any of those problems.
http://www.youtube.com/watch?v=WfDdDWttzRI
After a week of using a cheapo leather case I pulled my SGT out and found that the back panel (white) edges have dark splotches on them, almost like its been placed over a flame. Tried rubbing it off with all sorts of stuff but it just wont come off. My wife has had an iPhone for 2 years and the white panel on the back still looks new. Quality of the material perhaps? anyone else have this and able to clean it?
Sent from my GT-P1000 using XDA App
More like the cheap leather case of yours tainted the black color onto the back of your tab. I had this kind of case before, but luckily I have a layer of screen protector at the back, even that layer is tainted..It's not the tab, just the cheap casing.
no discoloration here, my tab is naked all the time tho
As a rule, as soon as I get my devices I get them laminated (a good one at that) both front and back. Thr surface on the front is resistant to oily hand marks and the back one well lets just say keeps it shining for a good 6-8 months before I get a new one done. This way selling it is never a problem. Cheers!
Sent from my GT-P1000 using XDA App
I had that problem with my Galaxy Tab and the Samsung leather case that came with it. It seems that the soft fabric they line the inside with rubs off onto the Tab. It's not actually that big of a deal to get off. I took some rubbing alcohol (70% Isopropyl Alcohol), poured it on a cotton ball and used a small amount of pressure. It came right off and my Tab looked brand new.
I am in India, waiting for the free leather case from Samsung.One concern is about the heat,if the back is encased,can the device heat up? Will it affect it adversely ?
n2s2k2india said:
I am in India, waiting for the free leather case from Samsung.One concern is about the heat,if the back is encased,can the device heat up? Will it affect it adversely ?
Click to expand...
Click to collapse
I have not experienced any problems with the device heating up while in the case. To be perfectly honest, the only time I have even felt the device get slightly warm is when I'm charging it via the wall charger. Even then, it doesn't get that warm. If you're worried though, you can always charge the device outside of the case. While you're using it though, you won't have to worry about it overheating in the case.
Put on an invisishield before you put it in the case. There are a few companies that sell then online for a cheap price.
I still can't get it off, anyway I ditched the case and made one myself instead. You can find it in the SGT accessories forum
Sent from my GT-P1000 using XDA App
I had/have the same problem from a black cowhide case I got from acceport.com - unsightly black blotches on the white back. I had a go at the firm that sold me the case but, naturally, have had no reply. The back almost looks new now after plenty of polishing with an almost daily cleaning and polishing with an all-purpose cleaner I have seen many of the phone shops here in Thailand use to clean telephone screens, etc. Still it will never look like new - it will always have some visible signs of the staining.
Waxy
Not that my reply is helpful to your situation but it's interesting that each US carrier chose their own different design for the back. AT&T definitely chose wisely with their matte carbon fiber styling. I was in a T-Mobile store this weekend looking at their Tab and that glossy black style is a terrible finger print magnet and now I am reading that the white can discolor. Way to go AT&T, your customer service sucks but someone made a good decision at a terrible company.
same problem here.. black cheap leather... dirty white back, I'll try with alcohol, anyways I buy a new "clip-on" leather that seems look better and it has stand
dealextreme leather case
So I was surfing on ebay for a rugged case for my n4
I ran by this...
http://www.ebay.com/itm/Triple-Armo...t=US_Cell_Phone_PDA_Cases&hash=item5d43674502
It seems like a ballistic sg knock off but at a lower price
comes with screen protectors too if that matters for anyone...
Does ANYONE have any experience with this case? If so, please let us know!
Otherwise I'm going to order a Ballistic SG this week.....
mc704 said:
So I was surfing on ebay for a rugged case for my n4
I ran by this...
http://www.ebay.com/itm/Triple-Armo...t=US_Cell_Phone_PDA_Cases&hash=item5d43674502
It seems like a ballistic sg knock off but at a lower price
comes with screen protectors too if that matters for anyone...
Does ANYONE have any experience with this case? If so, please let us know!
Otherwise I'm going to order a Ballistic SG this week.....
Click to expand...
Click to collapse
I would order that ebay one instead of the SG.
I had the SG and it wasn't worth the money. The problem with it is that the silicone isn't a perfect fit so the nexus 4 slides up and down a bit. The plastic piece that goes over the inner silicone cover occasionally comes undone a bit (it's hard to describe exactly) which leads to more sliding of the nexus. The plastic piece doesn't stay on as well as I'd hoped because the silicon is too soft to let it really clamp on well.
That ebay one is much cheaper and appears to be basically the same.
The case I have now and would really recommend is the mybatt. In addition to a back plastic clamp on piece, it also has a front screen side snap on piece so its inner silicon layer is sandwiched securely. I haven't had any sliding issues like I did with the Ballistic. Here's a review someone did on the mybatt: http://forum.xda-developers.com/showthread.php?t=2120148
It does come in a couple different colors. I have the all black one because I thought the white might get stained with dirt.
lazer155 said:
I would order that ebay one instead of the SG.
I had the SG and it wasn't worth the money. The problem with it is that the silicone isn't a perfect fit so the nexus 4 slides up and down a bit. The plastic piece that goes over the inner silicone cover occasionally comes undone a bit (it's hard to describe exactly) which leads to more sliding of the nexus. The plastic piece doesn't stay on as well as I'd hoped because the silicon is too soft to let it really clamp on well.
That ebay one is much cheaper and appears to be basically the same.
The case I have now and would really recommend is the mybatt. In addition to a back plastic clamp on piece, it also has a front screen side snap on piece so its inner silicon layer is sandwiched securely. I haven't had any sliding issues like I did with the Ballistic. Here's a review someone did on the mybatt: http://forum.xda-developers.com/showthread.php?t=2120148
It does come in a couple different colors. I have the all black one because I thought the white might get stained with dirt.
Click to expand...
Click to collapse
Thanks for your opinion!
I went ahead and bought it on Amazon through a third party for almost $6! (CHEAP price IMO) Ebay had it for 9 bucks :victory:
I read some reviews of it. It seems like people had a mix problem with the sensor cut out. Do you have any problems of your own or any cons you want to bring up?
mc704 said:
Thanks for your opinion!
I went ahead and bought it on Amazon through a third party for almost $6! (CHEAP price IMO) Ebay had it for 9 bucks :victory:
I read some reviews of it. It seems like people had a mix problem with the sensor cut out. Do you have any problems of your own or any cons you want to bring up?
Click to expand...
Click to collapse
I personally didn't have that problem. It seems to have mainly been on the first few versions of it that came out. People didn't mention that issue as much after it had been out for awhile. I just got mine about a month and it's been fine.
lazer155 said:
I personally didn't have that problem. It seems to have mainly been on the first few versions of it that came out. People didn't mention that issue as much after it had been out for awhile. I just got mine about a month and it's been fine.
Click to expand...
Click to collapse
just to follow up with this post...
My case doesn't have this problem either so if anyone is interested in getting the Mybat Tuff Case & doesn't mind the bulk. I highly recommend it!:good:
My ballistic case fits perfectly without problem but hey that one is cheaper
Sent from my Nexus 4 using xda app-developers app
I have the Ballistic case and it fits good. Mine doesnt slide around in the rubber part and Ive never had the plastic cover fall off.
I do wish Gumdrop made a N4 case though.
Received my Boost Mobile Sharp Aquos Crystal on October 16, 2014 and after a few hours of tinkering,
started shopping for the usual case / holster with belt clip and clear screen protectors. Here are what
I ordered on eBay for my new smartphone . I will promptly post reviews of each upon receipt:
Case / Holster $5.99 <Received 10/20/2014. stitching quality is decent but case is so tight, can hardly get phone in/out & zero padding inside case. Seller admitted size error, refunded.
Next, I ordered this case for $5.99 < This seller DID NOT send me the case as pictures in their eBay listing. They sent me a case that is too small for this phone AND has cutouts that would allow the corners of the phone to be damaged if dropped. Package label says case is for a Samsung phone, not this Sharp phone. I contacted seller, no response in past 24 hours. Ordered from a 2nd ebay seller with same results. My search for a GOOD case/holster continued.
NOVEMBER 6, 2014 UPDATE: Finally found a case/holster that IS THE CORRECT SIZE AND protects the ENTIRE Sharp Aquos Crystal: $7.95 case / holster.
Screen Protectors (pack of 6) for $1.99 < Received in 4 days & perfect fit for this phone. Note: Pull back Tab #2 slightly BEFORE applying to phone or you might not be able to remove it after you iron out the bubbles.
Both prices including free delivery in USA.
Glenn
P.S. I look forward to working with other XDA members in rooting & creating custom ROMs for this shiny new marvel.
My prior & current flat screen toys include: Original AT&T iPhone, Acer Iconia A500 Tablet, Asus Tf700T Tablet, Google Nexus 1, Google Nexus 7 Tablet, Galaxy Tab 8.9, Tab 2 10.1, Verizon Motorola Startec, Motorla V60, Motorola T720c, Motorola MPX220, Nobis NB7022 S Tablet, Sprint Galaxy S2 Epic 4G Touch, T-Mobile Pocket PC 2003, T-Mobile Galaxy S4, T-Mobile Galaxy Note 3
Screen Protector
Zagg makes one for the Crystal, but sadly it's only the Original version...
http://www.zagg.com/invisibleshield/sharp-aquos-crystal-cases-screen-protectors-covers-skins-shields
This phone wants you to rock it naked. I've been wanting to port a stock nexus 4 rom for this phone but I want to keep some of Sharps features.
Thx for the recommendation on the screen protector. Just ordered one for $2.49
Sent from my 306SH using XDA Free mobile app
Skinomi
Another option if you like the nakedness of the Crystal is TechSkin from Skinomi. I just got mine yesterday and its very eye-catching. Its an adhesive phone skin and screen protector(I got the black carbon fiber). When shopping for it, I was a little apprehensive that it would look cheesy, but its way better than I hoped for. The way its cut comes right up to the chrome and makes it stand out. Its textured too, so its not just some cheap sticker. The good thing about it is you can still use a case. I didn't use the screen protector though; I don't know, my phone just want to show all its glassy glory. I got mine on Amazon for around $12. They also have woods and brushed metals.
cmomoney said:
Another option if you like the nakedness of the Crystal is TechSkin from Skinomi. I just got mine yesterday and its very eye-catching. Its an adhesive phone skin and screen protector(I got the black carbon fiber). When shopping for it, I was a little apprehensive that it would look cheesy, but its way better than I hoped for. The way its cut comes right up to the chrome and makes it stand out. Its textured too, so its not just some cheap sticker. The good thing about it is you can still use a case. I didn't use the screen protector though; I don't know, my phone just want to show all its glassy glory. I got mine on Amazon for around $12. They also have woods and brushed metals.
Click to expand...
Click to collapse
Pics?
MrTriTanium said:
Pics?
Click to expand...
Click to collapse
Sure!
That actually looks terrific! I saw that and the other stick-on cases on Amazon you mentioned, but gave no second-thought since the manufacturer pictures looked chintzy and not worth it.
You know, that's what I thought too. But once I got it on, my son walked by on his way to the kitchen and was like "Wow." That's a lot coming from a 19 year old. The quality is way higher than I expected, a real high-end look and feel.
Late as this post is, anyone try the snap-on cases? I bought this one http://www.amazon.com/gp/product/B00OOGDRVK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 Clear-Ice brand carbon-fiber snap-on case, sort of like a bumper case on the iPhone 5S. I do like the idea of the sticker thing, but it doesn't appeal to me, personally. I want the device more sealed in.
I'm getting my phone and case on the 10th, so I'll see then. I'm just curious if there's been more exploration than these stickers, or adding a tertiary pocket for your phone.
UltimaXtreme said:
Late as this post is, anyone try the snap-on cases? I bought this one http://www.amazon.com/gp/product/B00OOGDRVK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 Clear-Ice brand carbon-fiber snap-on case, sort of like a bumper case on the iPhone 5S. I do like the idea of the sticker thing, but it doesn't appeal to me, personally. I want the device more sealed in.
I'm getting my phone and case on the 10th, so I'll see then. I'm just curious if there's been more exploration than these stickers, or adding a tertiary pocket for your phone.
Click to expand...
Click to collapse
Phone pops out way too easily in the snap on cases. IMO. I got a dual layer hybrid for mine and am pretty happy with it.
Sent from my 306SH using XDA Free mobile app
Code:
skryte said:
Phone pops out way too easily in the snap on cases. IMO. I got a dual layer hybrid for mine and am pretty happy with it.
Sent from my 306SH using XDA Free mobile app
Click to expand...
Click to collapse
Yeah, or they stop snapping altogether.
skryte said:
Phone pops out way too easily in the snap on cases. IMO. I got a dual layer hybrid for mine and am pretty happy with it.
Sent from my 306SH using XDA Free mobile app
Click to expand...
Click to collapse
Actually, I got my phone and the case and am impressed by it. It snaps on with some click, it holds well, and it fits the nature of a bumper case quite well. My real complain stems from it not being an actual carbon fiber cover. It's just this gloss shell with a bunch of black squares gridlocked together to imitate carbon fiber in appearance and nothing more. It's actually more slippery than the naked phone. It protects it, I'll admit. The snaps over the edges actually protrude that little bit out from the screen, giving it the most subtle protection from surfaces.
Disappointingly, I ruined the screen protector in the process. I'll probably either buy a set or look up how to clean one and apply them properly.
Delte
Screen Protector
I picked up one of the hdx Zagg screen protectors over the holidays on sale and also got one from a family member as a Christmas present.
I will sell the extra at a cheaper price than what you normally could, if anyone's interested message me for info.
So not to post the same link again, it is located on the first page in one of my posts in this thread.
Anyone felt all of these?
Mostly concerned about how well these different backs will wear in the long term. I would *like* to use the DT2 without a case due to the sheer size of the phone without a case. My current phone just has a silicone sleeve - but even that I think will make the already large DT2 too big.
I felt all the ones Verizon had/sells. They are all different. Your guess is as good as mine on how they will hold up over time.
I was going to go with no case, then I dropped mine and got a sharp burr on the aluminum frame. Cosmetic, but it is sharp and annoying, so now it's in a case. Lol
Sent from my XT1585 using Tapatalk
JasonJoel said:
I felt all the ones Verizon had/sells. They are all different. Your guess is as good as mine on how they will hold up over time.
I was going to go with no case, then I dropped mine and got a sharp burr on the aluminum frame. Cosmetic, but it is sharp and annoying, so now it's in a case. Lol
Sent from my XT1585 using Tapatalk
Click to expand...
Click to collapse
I have a feeling that will happen for me as well. I haven't had a phone out of a case in...ever?
Which one did you wind up with? I'm hesitant to get the leather...I keep phones forever, and if the back of the phone looks anything like my shoes that won't be good. I'm not sure what the "soft grip" actually is. I feel like the nylon will probably wear the best, but I worry about snags when out of a case. I tend to work/play around bare metal objects (engines, etc) and they have "burrs" and other stuff that would probably grab it. Hmm. Decisions. I'd rather just have a "carbon fiber" back like my Razr Maxx has...
Here is what I thought the ones in the store leather I didn't like it looked cheap. Ballistic nylon was OK I was going to get it because they didn't have the soft touch. They found a black soft touch and I loved it.
Sent from my XT1585 using XDA Premium 4 mobile app
I got the grey nylon. I like it a lot. Can still see it pretty well through the clear tpu case I got.
Sent from my XT1585 using Tapatalk
I just ordered mine, but went to the Verizon store to see and touch the phone and it's different options. For me, it was between the soft grip and the leather. The nylon felt too slick for the width of the phone in my hands. I felt as though I would be really testing the new Shatterproof screen with that option. I chose the leather because it felt the best to me with the way the phone sits in my hand. My only worry is how it will wear over time. From looking and feeling, I think the soft grip and ballistic nylon options will last the longest.
I went with the pebble leather. I preferred the slight resistance over the soft grip.
Sent from my XT1585 using Tapatalk
I went soft grip. Leather seemed a little cheapish like it would show scuffing. Ballistic seemdd like it will hold dirt and crud.
I did soft grip and didn't like it at first as I thought it was too slick to the touch. I went to the V store to feel the other materials and didn't much 'if any' difference in grip, so I"m sticking with the nice modern look of the soft grip...
I went with the leather. Matches the steering wheel, shifter and arm rest in my pickup.