Hi guys, can anyone help me with this, I recently acquired a lg e400 and rooted it, was going to flash cyanogenmod for it but i messed up and flashed a different baseband for a different model phone first(i know it was stupid, now i have a semi-hard brick and the only mode i can get into is a black screen, computer sees the phone as lge androidnet usb, i enter this by holding the vol down and power as i plug into the computer. I've tried every other key combo but cannot get into any other mode....i've tried using the lg flash tool with no success, tried uptest with no result, tried the lg mobile support tool and it picks up my phone as the correct phone lge400r with a software version of v20e which used to be a v10b....how can i flash just the correct baseband?....i also tried kdz and when i try and flash the original kdz file it starts but fails with wparam:100 lparam:1002, i'm thinking maybe i have the incorrect firmware kdz....could anyone point me in the right direction with this?....it's driving me nuts
dantheman1977 said:
Hi guys, can anyone help me with this, I recently acquired a lg e400 and rooted it, was going to flash cyanogenmod for it but i messed up and flashed a different baseband for a different model phone first(i know it was stupid, now i have a semi-hard brick and the only mode i can get into is a black screen, computer sees the phone as lge androidnet usb, i enter this by holding the vol down and power as i plug into the computer. I've tried every other key combo but cannot get into any other mode....i've tried using the lg flash tool with no success, tried uptest with no result, tried the lg mobile support tool and it picks up my phone as the correct phone lge400r with a software version of v20e which used to be a v10b....how can i flash just the correct baseband?....i also tried kdz and when i try and flash the original kdz file it starts but fails with wparam:100 lparam:1002, i'm thinking maybe i have the incorrect firmware kdz....could anyone point me in the right direction with this?....it's driving me nuts
Click to expand...
Click to collapse
I think that you should use this site LINK. There you have all of the firmwares for L3, and you can choose baseband
Daniolki said:
I think that you should use this site LINK. There you have all of the firmwares for L3, and you can choose baseband
Click to expand...
Click to collapse
yes, i tried that, but the only mode i can enter is download mode.....kdz updater fails, is there a way to flash in download mode?
1. Download THIS, your firmware as .kdz file and LG PC Suite
2. Install msxml.msi, and LG PC Suite
3. Run KDZ_FW_UPD (some antivirus software can recognize it as malicious software, but I have used it, and there is not any problem with this)
4. Select Type: 3GQCT, PhoneMode: DIAG or PhoneMode: Emergency (I don't know what is difference between them, so you have to test it)
5. In KDZ File you are choosing your previously downloaded firmware which is in .kdz format file
6. Boot to Download Mode (vol down + power) in the same moment you have to plug your LG to PC.
7. Wait for drivers installation, if nothing is installing go to the next step.
8. In KDZ_FW_UPD hit Launch Software Update and you have to wait until you see message "===FINISHED==="
That's all.
I used THIS guide.
Hi everyone,
I ****ed up, i know... i had some problems with my G2, the last restauration was with : Europe OPEN D80220H_00.kdz
But i clicked by accident on a buttom from a program saying "fix the partitions problems", after that, the G2 crashed and black screen.
The phone was lighting and i saw everypartitions when it was plugued on my computer, but asking for a format on each partition. so i decided to use this :
http://forum.xda-developers.com/showthread.php?t=2582142
But i ****ed up again and i think it's because i used the wrong files, i used : BIN_LGD802AT-00-V10b-SEA-XX-SEP-04-2013-32G.zip (i don't know if it's because of that ? )
after that, the phone isn't reconized at all from windows and ubuntu... the drivers can't be reconized
I can't see any partition now, so i can't do it again. I don't know what to do now.
I fount another tutorial for extract every img files from my own kdz : "Europe OPEN D80220H_00.kdz" but i can't put them on the phone anymore.
Version : Europe OPEN D80220H_00.kdz
Tel : LG G2 D802 32G Blanc
Thanks in advance !
i'm not able to understand if it is QH USB 9006 or 9008 - you should try contacting member "tungkick" on this forum
sandys1 said:
i'm not able to understand if it is QH USB 9006 or 9008 - you should try contacting member "tungkick" on this forum
Click to expand...
Click to collapse
why ? he will be able to help me ?
Will try, thanks !
Something new :
I have finally set my phone on "download mode" EVEN IF my screen is always black so i dont see ANYTHING on the screen. But i just know that he is really download mode cause i press "top buttom" during puting my usb cable and the connection is faster.
BUT, i tried to use the LGFlashTool (with the tuto) and it says some error "EMEI" and "PID" NULL.
So the program doesn't want to continue :/
How to Fix "error device not found in dload trying flash programmer" when use boardiag .
Lg g3 qualcomm 9008 when install driver then use tool boardiag fake tool say device not found in dload trying flash programmer
when you use tool fake board share in xda another tool say device not found in dload trying flash programmer. You need remove battery (of lg g2 hold power 1 minute) then connect cable again and use tool again
Sure install driver 100% wrong
With windowns 64 bit you need restart pc then click f8 choose disbable driver singturne....
Then remove battery (hold power 1 minute with lg g2) then connect cable try use tool unbrick >> sure done 100%
I will updload video error dload
Remember disbbale tool sony erricson if you have open tool in taskbar
How to fix “No response from the device. Check PMIC first and
if still boot problem, replace AP.”
Remove battery and connect again put qualcomm 9008 then use tool in topic
http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-all-variants/ Just as helping
[*]I see very topic unbrick qualcomm 9008 lg g2, lg g3 but all tool can not use.
I have full tool board ver 2.9.( only 2.9).
Link download drive.google.xxx /file/d/0B_Hol5T47S-bYjNETmVPZkdWUms/view?usp=sharing (xxx= com)
Support lg g2, lg g3 workking 100%.
Download tool, open BoardDiag and choose file tot correct model phone of you( you can download tot in xda)
See guide in pictrure : very easy.
Note
Hold power 2 minute and connect cable ( or remove battery)>>And open tool check ap, emmc test again
Then unbrick done remove cable, hold power 30 second and hold volume up connect cable phone put downloadmod >> Use lgflashtool 1.5 flash file tot again >> done.
If done pls donate a few beers paypal of my Thank you very much.
Man you saved my ass Thank you so much !1 when i get my salary ill donate to you and tell everybody to do so cuz this tool is amazing. im in download mode now ill try to flash with lg flash tool.
Thank so much man but my g3 last week unbrick qualcomm i had I submit for warranty[emoji24] [emoji24] I am very Star-crossed [emoji20]
Hello friend willcracker
Hello friend willcracker :good:
I hope all is well;
I saw this little tutorial so I want to ask for help
I have a LG G3 D855p and my phone is dead (bricked)
I can not quite understand the method you friend
not turn on my phone
I can not enter the "" Download Mode ""
VOL + Up when I connect the USB cable to the PC recognizes me as:
Qualcomm HS-USB QDLoader 9008 (COM10)
why I ask for help to revive my g3
If you help me ... .. I promise to donate something for you
you send a file "picture" attached
- - As I can get to "" Fastboot Mode "" on my phone
I hope your prompt response, please do not ignore my message :crying:
greetings from peru
You need to Disassemble Phone and Expose the TP Location
See pictrue
Expose the TP Location.
Done phone put qualcom 9008>> use tool unbrick
Remeber unplug battery connect only cable and short testpoint
Thanks for responding, but I need your help please friend
Hello willcracker I have no such tool you indicate "tool unbrick testpoint"
I could do this step with some type of cable or wire?
- If you Might tell me how to do that step with another option
leave your email. to chat google chat (Houngts) and you help me please
I'm worried because my g3 d855p not light, or anything like I said ....
await your prompt response, I hope you can help me
TOT Firmware, must match installed version?
Hey, thanks for providing this tool!
Final question, the TOT file must this match the installed version?
My situation:
Lollipop was installed, goal was to move to a custom rom (blisspop v2.3)
Rooting was successful
Install of twrp not, reboot into recovery caused the 'signature verification error'
Tried to flash the kitkat rom via the download method, failed, ...
Currently, I have the same verification error also when trying to get into download mode and have the Qualcomm HS-USB QDLoader 9008 in my device manager.
I have the LGD855AT-00-V10e-EUR-XX-JUL-08-2014-16G+0.tot file and did the first step of your procedure. Can I do the second step with this extract of kitkat even if lollipop was installed?
any feedback greatly appreciated!
Hello willcracker thanks, thanks for reply but I need your help please
Hello friend willcracker not have any of those tools indicated in its response = "testpoint tool unbrick"
I can do this step with some type of cable or wire
- I want you to guide me step by step how to perform the process
**will commit without any error.
And haci get my phone g3 ... haci I could also help others or siblings who need help to solve any problem with the g3
- I can not enter download mode
- I can not enter recovery mode
- When I turn on my phone, get the LG logo goes about three letters at the top left, then flashes a red, blue lights ...
- The PC recognizes me as Qualcomm HS-USB QDLoader 9008 (COM10)
You could leave your email. Google to chat chat (Houngts) and help me please
*....
Waiting for your prompt response, I hope you can help me
Please do not ignore my message willcracker friend
Greetings from Peru
themusic1510 said:
Hello friend willcracker not have any of those tools indicated in its response = "testpoint tool unbrick"
I can do this step with some type of cable or wire
- I want you to guide me step by step how to perform the process
Greetings from Peru
Click to expand...
Click to collapse
NO you need find google how do short testpoint samsung n7100 you see they guide short testpoint . Lg when short testpoint phone detect qualcomm 9008
And you use tool board diag unbrick.
???
themusic1510 said:
Hello friend willcracker not have any of those tools indicated in its response = "testpoint tool unbrick"
I can do this step with some type of cable or wire
- I want you to guide me step by step how to perform the process
**will commit without any error.
And haci get my phone g3 ... haci I could also help others or siblings who need help to solve any problem with the g3
- I can not enter download mode
- I can not enter recovery mode
- When I turn on my phone, get the LG logo goes about three letters at the top left, then flashes a red, blue lights ...
- The PC recognizes me as Qualcomm HS-USB QDLoader 9008 (COM10)
You could leave your email. Google to chat chat (Houngts) and help me please
*....
Waiting for your prompt response, I hope you can help me
Please do not ignore my message willcracker friend
Greetings from Peru
Click to expand...
Click to collapse
I'm in the same boat! Could you please explain it a little better?
frank.devliegher said:
Hey, thanks for providing this tool!
Final question, the TOT file must this match the installed version?
My situation:
any feedback greatly appreciated!
Click to expand...
Click to collapse
You need extract file tot d855 and put phone to qualcomm 9008 and unbrick . DOne flash stock rom. Find rom 5.01 link another
Ahh now i see!
Well ive tryed this guide with two different computers, but all i get is ap check failed, i do get into qualcomm mode and everything. Why does it fail!!? Am i doing something wrong?
@willcracker
The link doesnt work !? Where can i download the BoardDiagTool?
I have a F240L and this totfile BIN_LGE980AT-00-V20g-ATT-US-APR-28-2014+0 .Can I use it?
I have tried with this file but i get the message AP Check or Check PMIC first
sourly64 said:
@willcracker
The link doesnt work !? Where can i download the BoardDiagTool?
I have a F240L and this totfile BIN_LGE980AT-00-V20g-ATT-US-APR-28-2014+0 .Can I use it?
I have tried with this file but i get the message AP Check or Check PMIC first
Click to expand...
Click to collapse
what do you mean?
The link unbrick only g2 g3 and gpro2
Phone of you G pro i not upload tool . Unsderstand.
Magnerion said:
Well ive tryed this guide with two different computers, but all i get is ap check failed, i do get into qualcomm mode and everything. Why does it fail!!? Am i doing something wrong?
Click to expand...
Click to collapse
Model Lg d851? writh
rememer ber tool suppoer only lg g3 f400s/l/k , lg d855 16gb and 32gb.
If use tool say error pcmic on tool not support (Ex: lg d851)
I up load only msm8974ac g3 msm8975ac g3 no upload
Magnerion said:
Well ive tryed this guide with two different computers, but all i get is ap check failed, i do get into qualcomm mode and everything. Why does it fail!!? Am i doing something wrong?
Click to expand...
Click to collapse
It seems won't work.I have gone through about this problem.Alway AP Check fail.QPST reported that phone had been in Sahara download mode for few seconds.A RMA fix my phone.But it cost me about 50dollars
willcracker said:
what do you mean?
The link unbrick only g2 g3 and gpro2
Phone of you G pro i not upload tool . Unsderstand.
Click to expand...
Click to collapse
Hello willcracker !
Thanks for the note,do you know the totfile is the right one ?
I get with this file ,when is extraced the message in BoardDiag Check PMIC first and if not boot Check AP
TOT Version
willcracker said:
You need extract file tot d855 and put phone to qualcomm 9008 and unbrick . DOne flash stock rom. Find rom 5.01 link another
Click to expand...
Click to collapse
I have a TOT file, but for kitkat, not Lollipop. Can I use this TOT file?
(have only a kdz file for lollipop)
Thx!
frank.devliegher said:
I have a TOT file, but for kitkat, not Lollipop. Can I use this TOT file?
(have only a kdz file for lollipop)
Thx!
Click to expand...
Click to collapse
YES you can use tot kikat unbrick .
sourly64 said:
Hello willcracker !
Thanks for the note,do you know the totfile is the right one ?
I get with this file ,when is extraced the message in BoardDiag Check PMIC first and if not boot Check AP
Click to expand...
Click to collapse
sr i have not upload hex lg gpro waitting comming soon.
Guide fix "device not found in dload trying flash programmer" when use boardiag .
Lg g3 qualcomm 9008 when install driver then use tool boardiag fake tool say device not found in dload trying flash programmer
when you use tool fake board share in xda another tool say device not found in dload trying flash programmer you need remove battery (of lg g2 hold power 1 minute) then connect cable again and use tool again
Sure install driver 100% wrong
With windowns 64 bit you need restart pc then click f8 choose disbable driver singturne....
Then remove battery (hold power 1 minute with lg g2) then connect cable try use tool unbrick >> sure done 100%
I will updload video error dload
Remember disbbale tool sony erricson if you have open tool in taskbar
then read topic use tool of my unbrick
http://forum.xda-developers.com/lg-...lcomm-9008-t3072091/post59881075#post59881075
i have same problem when i hit start button show that error ( b2bsuppportlg device was not found in dload trying flash programmer )
i tried on 4 different pcs (win7 .. win xp service pack 3 .. ) but same result any one have solution ???
driver signature check disabled?
drivers correctly installed? (lg AND qcom)
edit unfortunately, the tootls provided here on xda are mostly broken or missing important files...
this seems to be due people not wanting other people (support-shops) beeing fired
weird weird stuff tho
everything fine but still same error u have working link ??
hey there guys, somebody has resolve this problem? im suffering the same problem in a nexus 5
im also facing the same prob
all are dumb
No one want helping others they only want donations from us so guys carry on if u dont want to help us then no worry
Hi All! I've found a solution!
The trick is to use a Heat Gun for heating up both ICs on both sides of motherboard.
I've had the same problem:
"device not found in dload trying flash programmer" when use boarddiagI also tried SRKtool, but in last step, I couldn't find the partition.
So both SRKtool and BoardDiag failed.
All hope was lost. So I did warm the CPU and Storage IC on both sides with Heat gun!
about a minute or so for both ICs until both were very hot.
That did the magic.
After that both SRKtool and BoardDiag worked for me perfectly and I was able to revive my phone.
I think in all our cases this problem is because storage IC and CPU IC have been out of work for a long time and they need to get warm to work after all this time of being turned off.
Really hope this works for you all.
So I bought this secondhand G2 and it said on the cover it's D802T (Australia Model) while inside it was D802 (International). For sake of generosity I tried to flash it with D802T .kdz file and got it bricked, when I opened the back cover it was D801 model (Freaky right?).
So basically I'm stuck with:
1. LG BootLoop with constant waving Blue and Green LED
2. Download Mode - Turns on but doesn't get detected by Computer (using Windows 10 and trust me Windows 7/8 didn't detect it either)
3. Vol Down + Power takes me to Factory Reset cuz no recovery installed
4 LG BootLoop detected as (LGE AndroidNet) driver on device manager
I've tried the following methods for it's recovery:
1. Tried another .kdz but failed since download mode doesn't detect
2. Tried .tot method in LGE AndroidNet mode (COM41) using "BIN_LGD802AT-00-V10b-SEA-XX-SEP-04-2013-32G+0.tot" stock but it gives some Failed to Read model error
3. Tried LG Support Tool (B2CAppSetup) to download online stock but it asks for Serial No. and I don't have the IMEI because the back casing seems to be replaced by some other phone
The repair center puts up the lame excuse that the charging port is faulty thats why Download Mode is not being detected but that cannot be mode lame cuz that port was the reason it got into Download Mode Duh.
I'm a student and in my place buying phone is basically as expensive as buying a car and even though it's secondhand, it got bricked not 24 hours after I bought it and the shopkeeper won't take it back cuz he says it's my fault I wanted to be generous and try original roms, so I'm sitting in shivers and trembles here.
Any help would be greatly appreciated.
Note: If this threat has been discussed already please send me the link to it cuz I couldn't find any. And please try not to feed me anger by asking if I re-installed drivers or did I try another computer or did I try adb or fastboot method cuz if you're experienced enough, you'd already know those considerations would've been taken and been failed to help so far. Thank you and please help.