Hi, i have a brick phone.
I installed by twrp a stock lollipop italia that this rom before works perfectly in my D805.
The problem is that i installed D805 bootloader of Pro2V5 rom and the phone has bricked. Says secure boot error, but i can to enter in download mode, but the problem is that cannot flash any kdz but thats programs like flashtool, lg support etc not recognize the phone.
The modem driver has intalled correctly but the csc driver and lge android phone not (cannot install them).
When i connect the phone in lg logo and secure boot error, appears many drivers that says if i wish format. seem is qhsusb_bulk error (appears in management)
And i tried with flashtool and tot and appears waiting for connection and not move of this place
How can i to unbrick my phone?.
Any method??
Thanks you
********EDIT*****
I recently use SRK Tool to fix the drives, and looks fine, now not show many partitions and also not show secure boot erro, now oly appears lg logo with secure error and restart permanetly.
What can i do?
Related
I have a 32 GB D805 from a friend which is bricked. It bootloops, cannot get into Recovery, can get into Download mode but it does not get everything recognized (CDC Serial gets stuck in Installing software even after installing the drivers). When in Download mode, it shows "USER B6" and "ROOTED" messages. I have no idea whatsoever what ROM it had before, but it was not the stock one.
I have already tried following THIS guide, the KDZ method does not work, and the TOT file for a D805 is non-existant. Just as a test, i tried THIS guide and it did boot, it even detected a ton of drives under W7. However, the files for flashing refer mostly to the D800 or D802. Would these work for a D805?
My LG G2 d802 is stuck in the download mode and has no recovery. It happened when i flashed Miui 6 by gtbluesky after full wipe of data and system. Previously it was on cloudy 3.2 . After flashing the miui it wont boot and is in a bootloop on mi bootscreen. I tried but cannot boot into recovery seems like it doesnt have a recovery.
However, I can boot into download mode but it is not recognised in ADB nor Lg flash tool. I tried flashing kdz with the lg flash tool but it wont detect the device. I tried installing various drivers to the pc and also tried two different pc with windows 7. However, adb wont detect the device.
Regarding the drivers, the windows installs all the drivers but fails to install the LGE Androidnet usb modem drivers. If i manually try to install it from the lg drivers, it would keep installing and returns an error of timeout period expired.
So, i am stuck in the download mode with a bricked device.
If Someone could help me with this problem, i'll be much obliged. Thanks
SOLVED
[SOLVED] I downloaded the .tot file for my phone and extracted .dll from one of the .kdz & flashed it using the lg flash tool . It flashed good and now my g2 is up and running. :good:
Hello
I'm new here, I've been modding my lg a few times, always when bricked, kdz or tot files were saving me.
But now I've got real problem.
I was changing ROM from Cyanogen 13 to Cloudy 3.3. I thought I just need to flash rom via recovery (2.8.7.3 bump blastagator). Flashed fine, without any troubles, but when it came to reboot, phone just got stuck on LGs logo.
I knew i f*ed up.
Recovery isn't working, but Download Mode is turning on normally, at least it seems to.
So i tried to flash KDZ, but LG Flash Tool immedently shuts down giving "lg user...." error (don't remember what exacly it was saying).
Then i tried via tot files. But after installing drivers from tutorials, device isn't showed as "LGE AndroidNet USB Serial Port", but as few positions like MTP device or usb serial port(but not in Com ports) and all are marked as devices without drivers. Flash tool for tot also didn't worked here, because it did't found device.
What can i do now? Please help me.
[Edit]
So now, using different drivers somehow Jelly Bean installed by tot method (device didn't appeared as tutorial said, but it worked) phone is booting normally, but i can't again install lollipop with kdz files.
I was trying 3 different drivers, every giving instant error of flash tool.
What can I do now?
[EDIT2] LGUSERCSTool.exe is crashing. How can I install lollipop now?
Are there tot files for lollipop?
Hi so my friend gave me his LG Leon to flash CM 12 because he didn't use it anymore. For my surprise when i turned on the phone it boots automatically in flash mode showing "910K" in the little box. I try to flash a kdz but nothing works, when the phones restarts boots in flash mode again.
I installed TWRP but always is showing that is not detecting the OS.
Why can I do?
Is a corruption of the partitions?
help
Try to flash a official rom using LGMobile Support tool. Connect the phone, open the program and Select "Option -> Upgrade recovery".
From what I can gather, the recovery was either replaced with an incorrect version or was corrupted.
Follow @He.Art
I had one backup of lgms345 flashabe if u want...its more easier
Hello Guys, I have LG G2 F320S (Korean Variant) and a few days ago it was stuck in fastboot mode while i was trying to upgrade to Lollipop firmware using LG Flash Tool 2014. And Fastboot commands were working fine but the problem was that some of the partitions had become write-protected so I was unable to erase or reflash those partitions. So, I short circuit the capacitor and I successfully entered Qualcomm 9006 mode with a number of partitions. I used SRKtool to restore partitions (I have this experience in the past so it was easy for me) but here I noticed 1 or 2 partitions were not restored (write-protected) but phone restarted to download mode. When I tried to flash stock firmware then it always stuck in the middle or something and later once again I was stuck in fastmode mode where I started.
I don't know how partitions became write-protected?
Once again I disassembled the cellphone and short-circuit the capacitor to enter Qualcomm 9006 mode and this time, I wanted to remove write-protection from these partitions so I opened "Diskpart" in "cmd" selected LG G2 and performed clean command and format it. Diskpart removed all the partitions gave me a 32GB single partition like a USB Flash. :laugh:
I thought may be after shorting the capacitor, I will get back partitions but this time I got QDLoader 9008 mode. Now whenever I connect phone to PC with or without battery then it is detected in Qualcomm QDloader 9008 mode.
I tried Boarddiag v3.99c but unfortunately this tool doesn't extract .kdz file of my LG G2 F320S korean variant. I tried to extract .tot file of LG G2 D802 (intl variant) and it completed successfully, so the problem is in .kdz file of my cellphone(probably not supported by this tool).
I can extract this .kdz using LGFirmware extract tool but unfortunately it doesn't create "partition.txt" file which is required in boarddiag to flash partitions. I used partition.txt file of LG G2 D802 but it gives error : No DLoad mode when trying to reflash programmer".
Any help would be appreciated.
#StayHomeStaySafe
Boarddiag full and working version helped
I have tried a lot of times to flash the partitions using boarddiag but it failed. It was the problem of the software because almost all versions had missing files. At last, I have found a working version of boarddiag which detects my phone and I am able to flash boot partitions to it. Although all 3 tests completed successfully (AP, EMMC, SDRAM) but still I am stucked, even after flashing all the boot images, I am still stuck in QDLoader 9008 mode and whenever I connect it to PC (with or without battery), it is detected in QDLoader 9008 mode.
Here is the link to the full working version of Boarddiag 3.99 for LG G2:
https://mega.nz/#!SwY2BQ6L!kPZ6s24hdaVj1x5grboFlAksHSwmItblXIcJCCSaeaw
(mega is blocked in many countries so you may have to use proxy/vpn to open this link)
Here is the result of all 3 tests. Please tell me whats the problem. SDRAM result is FAIL but why so?
https://ibb.co/6ntQwsv
Now I am able to enter "Download Mode" but unable to flash stock or any other firmware. I tried flashing with 2 softwares:
1. LG UP-G2-G3....This software gives error at 6% (at LAF read) as shown in picture below :
https://ibb.co/zXpDcjt
2. LG Flash tool 2014.... This software gives error at 4% by saying "Unable to Establish Connection" though connection is fine because phone is detected in Device Manager and in Download Mode "It shows signs that communication is successful but it wont flash.
salmanzafar said:
Now I am able to enter "Download Mode" but unable to flash stock or any other firmware. I tried flashing with 2 softwares:
1. LG UP-G2-G3....This software gives error at 6% (at LAF read) as shown in picture below :
https://ibb.co/zXpDcjt
2. LG Flash tool 2014.... This software gives error at 4% by saying "Unable to Establish Connection" though connection is fine because phone is detected in Device Manager and in Download Mode "It shows signs that communication is successful but it wont flash.
Click to expand...
Click to collapse
Did you try the TOT flash method already? It worked best for me, when I restored my phone from scratch 2 days ago.
rootarded said:
Did you try the TOT flash method already? It worked best for me, when I restored my phone from scratch 2 days ago.
Click to expand...
Click to collapse
Dear I have tried two methods. I tried LGUP and LG Flash Tools 2014. But both fails. Unfortunately, no TOT file is available for my LG G2 because its Korean variant (F320S) and it has only .kdz firmwares available.
QDLoader 9008 mode
Now, my phone is not entering download mode. It is displayed as QDLoader 9008 mode when connected to PC. Check the screenshot here : https://ibb.co/yk3VSbS
I have the working version of boarddiag but sometimes it passes all 3 tests and sometimes fails EMMC test ad sometimes SDRAM test is not completed successfully.