So whenever i try to flash the stock rom on my S4 SPH-L720 i always get this error in odin
<ID:0/003> Added!!
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNG2_L720SPTFNG2_L720VPUFNG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Please Help
Don't downgrade from latest firmware to older one....you may brick your device.
zararhayee said:
So whenever i try to flash the stock rom on my S4 SPH-L720 i always get this error in odin
<ID:0/003> Added!!
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNG2_L720SPTFNG2_L720VPUFNG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Please Help
Click to expand...
Click to collapse
If you have already flashed Lollipop it won't work. If not, try another cable or port on your PC.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bilgerryan said:
If you have already flashed Lollipop it won't work. If not, try another cable or port on your PC.
well when i did this it was on kitkat but it has had lollipop on it before, and i have already tried using a different cable and port
Click to expand...
Click to collapse
anees02 said:
Don't downgrade from latest firmware to older one....you may brick your device.
Click to expand...
Click to collapse
im not my device was on kitkat
zararhayee said:
bilgerryan said:
If you have already flashed Lollipop it won't work. If not, try another cable or port on your PC.
well when i did this it was on kitkat but it has had lollipop on it before, and i have already tried using a different cable and port
Click to expand...
Click to collapse
If it has ever had Lollipop on it won't work.
Click to expand...
Click to collapse
bilgerryan said:
zararhayee said:
If it has ever had Lollipop on it won't work.
oh, well is there any other way i can get back to stock
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Unfortunately, none that I know of.
bilgerryan said:
Unfortunately, none that I know of.
oh okay, well thanks anyway
Click to expand...
Click to collapse
Related
Shoot guys I'm really sorry for multi posting but so far the answers aren't helping I promise this is my last post of this.
OK first off I going to express my deepest apologies for starting a thread with an issue that has probably been answered 100 times... My problem is that I have tried every possible phrase that I know for search term pertaining to my particular issue and I am still stuck. SO I will be as details as possible and I hope and pray that at LEAST if I get kicked for starting this and the thread being shutdown, that someone will have posted "heres the link numb nuts be more careful next time".
OK so on with my issue. I have a Rogers Samsung Galaxy S4 I337M on 4.3, I tried to use chainfire's latest cf-Autoroot to root my phone and it just failed. Here is the log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
As you can see when odin could not find the PIT I downloaded one and retried.
Anyway now I'm stuck on this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and the top left may be important so here is the clearest shot of that:
Now I have tried to flash stock firmware that I downloaded from sammobile AND samsung update and no matter how many times I try to flash its the same thing over and over again (log):
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
I then thought about trying Kies. First problem, Emergency firmware did not list my device. Then I tried firmware upgrade and initialize and even though the start button wouldn't show unless I plugged the phone in as download mode, once the firmware was finished downloading and ready to flash it would give me an error saying it couldn't not detect my device.
I am not sure is this is EVERYTHING I could have tried but to MY knowledge it is. Please help
And my deepest gratitude to anyway and all who point me to the right direction. I hope I have been as detailed as I possibly can be.
CF-Auto Root
Some basic questions.... can you still get to download mode? Most importantly... did you use the Canadian file for cf auto root found here? http://forum.xda-developers.com/showthread.php?t=2293800 the I337 is not the same as the Canadian I337M so if you used the wrong file that would cause it to fail... does it boot at all if you try? also did you check the md5 to ensure your download was complete if you did use the right file??
Hello
I'm not sure if I'm doing this right so any help would be grateful. I currently have stock firmware installed and I'm trying to remove root from my phone. I searched around and it was suggested to reinstall stock firmware.
So I downloaded a stock rom from this thread, (UK_20H3G_20G900FXXU1ANE2_G900FH3G1AND4_H3G.zip - 1411.3 Mb - (because I'm on Three)) downloaded Odin, ran Odin, stuck my phone into download mode, loaded the firmware into Odin by clicking the PDA button, checked Auto Reboot and then hit start.
Here are the results;
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANE2_G900FH3G1AND4_G900FXXU1ANE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm tried this about 3-4 times and I'm getting the same result each time.
What am I doing wrong?
Thanks.
Possible useful info?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
_McShane_ said:
Hello
I'm not sure if I'm doing this right so any help would be grateful. I currently have stock firmware installed and I'm trying to remove root from my phone. I searched around and it was suggested to reinstall stock firmware.
So I downloaded a stock rom from this thread, (UK_20H3G_20G900FXXU1ANE2_G900FH3G1AND4_H3G.zip - 1411.3 Mb - (because I'm on Three)) downloaded Odin, ran Odin, stuck my phone into download mode, loaded the firmware into Odin by clicking the PDA button, checked Auto Reboot and then hit start.
Here are the results;
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANE2_G900FH3G1AND4_G900FXXU1ANE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm tried this about 3-4 times and I'm getting the same result each time.
What am I doing wrong?
Thanks.
Possible useful info?
Click to expand...
Click to collapse
my friend, im sure if you created the thread in Q&A forum
you will got the answer, next time questions can be ask in Q&A 's forum , you will probably have the answer of your problem
Anyone?
So i have cm 12.1 installed on my Samsung Galaxy S4 SPH-L720 and I want to restore my device back to stock.
Can anyone please help me do that?
Just get a stock .tar and flash it. It'll revert everything. As long as it's the official
krnfrk6663 said:
Just get a stock .tar and flash it. It'll revert everything. As long as it's the official
Click to expand...
Click to collapse
i tried that but i keep getting a fail auth error when doing it
zararhayee said:
i tried that but i keep getting a fail auth error when doing it
Click to expand...
Click to collapse
Wipe internal sd
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bilgerryan said:
Wipe internal sd
i tried that and i get this error
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNG2_L720SPTFNG2_L720VPUFNG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
zararhayee said:
bilgerryan said:
Wipe internal sd
i tried that and i get this error
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNG2_L720SPTFNG2_L720VPUFNG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Did you already flash OD2? If so, then you can't downgrade, you have to flash the OD2 tar.
Click to expand...
Click to collapse
bilgerryan said:
zararhayee said:
Did you already flash OD2? If so, then you can't downgrade, you have to flash the OD2 tar.
Click to expand...
Click to collapse
Where can I find that?
Click to expand...
Click to collapse
zararhayee said:
bilgerryan said:
Where can I find that?
Click to expand...
Click to collapse
In Android Development with everything else-http://forum.xda-developers.com/showthread.php?t=3133661
Click to expand...
Click to collapse
bilgerryan said:
zararhayee said:
In Android Development with everything else-http://forum.xda-developers.com/showthread.php?t=3133661
Click to expand...
Click to collapse
I just found out that my model is the sph-l720t, does this effect anything
Click to expand...
Click to collapse
zararhayee said:
bilgerryan said:
I just found out that NY model is the sph-l720t, does this effect anything
Click to expand...
Click to collapse
Yes, very much so. Good thing your phone didn't allow you to flash that. The L720T OD2 tar is posted on sammobile.com and someone else posted a mirror here, use the search function and you should find it.
Click to expand...
Click to collapse
what if its not official?
what if its not official? how can i go back to stock from cm12.1
Novel.BB said:
what if its not official? how can i go back to stock from cm12.1
Click to expand...
Click to collapse
Odin
Hi Guys .. Can you help me please? i have a problem with my Sprint Galaxy S4..
I tried to install a custom Rom and now is BLOCKED "Firmware upgrade encountered..." when i start Phone..
Now the only one solution is flashing with Odin right? But why Odin always FAIL ? I installed Drivers , i tried a lot of Firmwares .. From sammobile .. No one works ..
Also I tried this ROM http://forum.xda-developers.com/showthread.php?p=49213024#post49213024
LOOK some logs on ODIN when it FAILSSS
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUEMK2_L720SPTEMK2_L720VPUEMK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me .. How can i flash with ODIN ?
malefiCz said:
Hi Guys .. Can you help me please? i have a problem with my Sprint Galaxy S4..
I tried to install a custom Rom and now is BLOCKED "Firmware upgrade encountered..." when i start Phone..
Now the only one solution is flashing with Odin right? But why Odin always FAIL ? I installed Drivers , i tried a lot of Firmwares .. From sammobile .. No one works ..
Also I tried this ROM http://forum.xda-developers.com/showthread.php?p=49213024#post49213024
LOOK some logs on ODIN when it FAILSSS
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUEMK2_L720SPTEMK2_L720VPUEMK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me .. How can i flash with ODIN ?
Click to expand...
Click to collapse
What was your baseband before starting this process?
mattzeller said:
What was your baseband before starting this process?
Click to expand...
Click to collapse
Now i tried to FLASH latest version from sammobile
take a look at this SS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please help me guys .. is 1 week now since i'm trying to fix this S4
malefiCz said:
Now i tried to FLASH latest version from sammobile
take a look at this SS
Please help me guys .. is 1 week now since i'm trying to fix this S4
Click to expand...
Click to collapse
Try a different cable or port on the computer
bilgerryan said:
Try a different cable or port on the computer
Click to expand...
Click to collapse
I tried 5 cables .. i tried all PORTS + Used another PC ...
What's the problem ... I Don't understand ..
malefiCz said:
I tried 5 cables .. i tried all PORTS + Used another PC ...
What's the problem ... I Don't understand ..
Click to expand...
Click to collapse
Did you give Odin Administrator permissions? Right click on it and hit Run As Administrator.
bilgerryan said:
Did you give Odin Administrator permissions? Right click on it and hit Run As Administrator.
Click to expand...
Click to collapse
OF COURSE bro ! .... Still nothing .. unbelievable !
Your screenshot of Odin says your PIT Partition is missing. Sorry, I missed that earlier because it didn't show up in Tapatalk. I thought I saw somebody post the PIT file recently, try searching for it.
Hello
I want to jump on the Cyanogenmod train and i installed a custom recovery. However when i try to boot my device into recovery i get this weird screen that keeps getting darker. Pictures below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does anyone know how to fix this and what is causing this problem?
bcoudi said:
Hello
I want to jump on the Cyanogenmod train and i installed a custom recovery. However when i try to boot my device into recovery i get this weird screen that keeps getting darker. Pictures below.
Does anyone know how to fix this and what is causing this problem?
Click to expand...
Click to collapse
U will have the wrong twrp buddy
bcoudi said:
Hello
I want to jump on the Cyanogenmod train and i installed a custom recovery. However when i try to boot my device into recovery i get this weird screen that keeps getting darker. Pictures below.
Does anyone know how to fix this and what is causing this problem?
Click to expand...
Click to collapse
Cm12.1 built from source(based on 5.1.1) or cm13 ported (based on 6.0.1) ?
If cm12.1 built from source:
1) Are you on 5.1.1 Lollipop?
2) Did you flash correct TWRP recovery? http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3468844
If cm13 ported:
1) Are you on 6.0.1 Marshmallow?
2) Did you flash correct TWRP recovery? http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960
The recovery is fixed, i can acces it now. Wich cyanogenmod versions are you guys using?
bcoudi said:
The recovery is fixed, i can acces it now. Wich cyanogenmod versions are you guys using?
Click to expand...
Click to collapse
Cm12.1 is working flawless.
Cm12.1 thread: http://forum.xda-developers.com/gal...m-cyanogenmod-12-1-samsung-galaxy-j5-t3468830 . Some people experienced random reboots with latest release, so if you experience too, then do this:
1) Download this zip: http://forum.xda-developers.com/showpost.php?p=69375277&postcount=334 . Ignore that is for J500H, it worked for my J500FN.
2) Open the zip and remove build.prop from system folder.
3) Now flash the zip in TWRP recovery and reboot.
4) Open build.prop from /system/ with some editor and add following lines at the end of it:
Code:
# GPS
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
ro.gps.agps_provider=1
ro.pip.gated=0
5) Reboot and you are done.
CREDITS: @akasharif for this fix.
If you wonder why there isn't a new release with fix included, it's because Nick and Ganesh are working on cm13.
Personally I did this right after I flashed latest cm release and I didn't have any problem.
So i basically bricked my phone when messing with it. I tried to flash the stock rom trough odin but it doesn't work. I think its because i need to enable usb-debugging but i can't because i can't acces my phone. Anyone knows how i can fix this?
this is the message i get trough odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> J500FNXXS1APE5_J500FNVFG1APC4_J500FNXXS1APE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> boot.img
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Ext4)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
bcoudi said:
So i basically bricked my phone when messing with it. I tried to flash the stock rom trough odin but it doesn't work. I think its because i need to enable usb-debugging but i can't because i can't acces my phone. Anyone knows how i can fix this?
this is the message i get trough odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> J500FNXXS1APE5_J500FNVFG1APC4_J500FNXXS1APE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> boot.img
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Ext4)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You don't need to enable usb debug to flash stock rom as far as I know.
I got same problem when i tried to install first Marshmallow update, it was failing at hidden.omg.ext4.
Try this: https://www.youtube.com/watch?v=2uTHilnRsWw. Credits to @pacower for sharing that video. Also try to use newer Odin version (I used 3.09 or so all the time though).
Thanks! i've found the video and i can boot my android device again.
bcoudi said:
Thanks! i've found the video and i can boot my android device again.
Click to expand...
Click to collapse
Nice one
2 things, no need for 2 archiving programs. 7zip is more than capable of extracting tar archives, right click and select extract. No need to rename to md5.