Database Users

help with new mda lots of problems and i'm confused

ok i've done a bit of searching and i'm pretty sure its software related.
i got an mda pro from when i booted the phone up its had a o2 splash screen, so im assuming its had its software updated. so the phone works fine for about 6 hours or so but then it starts tt freeze up, propgrams stop responding and the phone wont do any thing. i left the phone like this for a few moments then i got a txt and the phone seamed to be working fine untill i went to use the camera and i got "the file camera cannot be opened. either it is not signed with a trusted cert or one of its components can not be found you might need to reinstall or restore this file".
ok so i had a look and found the Available Universal Versions and Upgrades
the thing is i'm not sure which is the best to use or how to do it.
what would you guys recomend i do ?
thanks

MDA Pro with O2 Rom?
Seems so that there is other Rom on it. Normally, this is not a Problem, but who knows, what was changed in this Rom.
I would recommend to download new Rom and install this.

Try http://www.my-xda.com/xdaexec_soft.html
Thats got the latest XDA update.... give it a go and then get the new 1.09.00 radio update too...
Hopefully that will sort you out!

chears i'll give that one a go and see what happpens. fingers crossed

ok so i downloaded the Xda Exec ROM v 1.13.188 from the above site followed the directions in the pdf file, connected the phone and made sure there arnt any programs running in the backgroung. when i try to runn the application to do the upgrade it says its trying to connect to the phone then gives
"error 201: get device data error
can not get device data
please make sure device is connected and run this update utility again"
only problem is that it is connected or so ms active sync says.
any ideas whats goign on or is there another way to update the software ?
thanks guys its apreciated

ok so i managed to get past that stage but
now i get
error 102 ce image file check sum error
the rom image file to be used for the update is corroupt. please download the correct device software update utility and try again.
i have no idea what that means any sugestions ?

@cusaeng, can't help with the ROM update but your initial problem of problems after 6 hours is typical of the Universal when its running low on RAM. Use an app like GSPMaigc+ which can really close processes and reboot once a day (obviously once you solve the ROM issue).

chears i'll look in to that program once i get the rom issues sorted
i've trued downloading a version of the jas jar rom and that give the same error message about being unable to get device information.
when i flashed phones befor eg a motorola a1000 you had to get the phone in to bootloader mode then use a progran to flash it is it a simaler process with the mda ?
i really dont know if i'm doing anything wrong or not

Serious Help needed

As this is my very first post in this forum, i have been using all the ROM's available till now by our great great authors like Jiggs/ kumara/ uday ... but yesterday i tried uploading N-touch ROM PP6Mb ROM,did worked great till now but all of sudden my screen started behaving awkard,it started scanning line on the screen moving upwards and even the display light has gone lighter then the normal settings i used,so i thought might be the problem with the ROM,i HF it but the problem continues, so i thought i'll use some other ROM,i tried Giggs-Touch Edition using Atom in Bootloader mode i started DSSU,till the 2nd screen where it checks and ask for upgrade finally it shows me "country ID Error" and on the Atom screen it showed"Please try to sync DSUU through activesync and then try again later",after several attempts i was not able to solve,had even check the forum for country id error,where it was only mentioned to HF and upgrade thru bootloader mode,no other solution. Would seriously appreciate if our seniors look into my problem,as i am a business man and totally dependent on Atom.
If anyone has came across with such problem of screen scanning lines or country id error,would sincerly request to help me out.
Warm Regards,
Shoyeb Baig

shoyeb2 said:
As this is my very first post in this forum, i have been using all the ROM's available till now by our great great authors like Jiggs/ kumara/ uday ... but yesterday i tried uploading N-touch ROM PP6Mb ROM,did worked great till now but all of sudden my screen started behaving awkard,it started scanning line on the screen moving upwards and even the display light has gone lighter then the normal settings i used,so i thought might be the problem with the ROM,i HF it but the problem continues, so i thought i'll use some other ROM,i tried Giggs-Touch Edition using Atom in Bootloader mode i started DSSU,till the 2nd screen where it checks and ask for upgrade finally it shows me "country ID Error" and on the Atom screen it showed"Please try to sync DSUU through activesync and then try again later",after several attempts i was not able to solve,had even check the forum for country id error,where it was only mentioned to HF and upgrade thru bootloader mode,no other solution. Would seriously appreciate if our seniors look into my problem,as i am a business man and totally dependent on Atom.
If anyone has came across with such problem of screen scanning lines or country id error,would sincerly request to help me out.
Warm Regards,
Shoyeb Baig
Click to expand...
Click to collapse
try this mate,
download official ROM from o2/MWG website.
flash via activesync upon running DSUU and not via bootloader.
Hope this helps for the scanning lines/wavey screen going up or going down.

Already tried doin so.
Thanks for your reply brother,but i have already tried doing so,as refered to previous threads and solutions provided,but i get the error "Country ID Error or Device ID Error".I am stuck here,i think the problem is with the display drivers,as when i am in boot loader mode the screen is proper and no such problems seen there,but when i am back on OS screen the problem appears. well on the O2 screen it shows"Try to load DSUU through OS mode and sync first and try again later" i am helpless here too.
please if any one came across such problem,please help me,it will be a great great favour on me.
Thanks,
Warm Regards,
shoyeb baig

Screen shot attached please go thru it
Please check the screenshot wen tried to use upload different ROM.

Try to change the country
It seems the country version of the ROM is different than the original ROM. Please do roll-back with the original ROM. And download the suitable and tested ROM.

[Q] downgrade issue

hey guys i have an annoying problem....
i am using custom rom lollipop 5.1 for a while (about 4 months) and i am just done from all these bugs and laggs so i decided to go back to kitkat 4.4.2 (factory firmware) from sammobile and downgrade the phone.
i download it from sammobile and the file is clearly perfect no corruption in it
it used it before and it was working pretty awesome.
now when i installed it , it shows a ( Ø ) symbol in network signal bars.
i tried to reconnect to any mobile network by i couldn't.
i tried to press on software updates but it says "registration failed" .
when i tried to backup the previous custom on it gives me the same error.
i knows now that the problem from Modem.bin but i don't know why it gives me registration failed
please help me guys i cant now receive any call...don't tell me to try to do any thing in the setting cuz i tried every singe thing.
Thanks

alizaki123 said:
hey guys i have an annoying problem....
i am using custom rom lollipop 5.1 for a while (about 4 months) and i am just done from all these bugs and laggs so i decided to go back to kitkat 4.4.2 (factory firmware) from sammobile and downgrade the phone.
i download it from sammobile and the file is clearly perfect no corruption in it
it used it before and it was working pretty awesome.
now when i installed it , it shows a ( Ø ) symbol in network signal bars.
i tried to reconnect to any mobile network by i couldn't.
i tried to press on software updates but it says "registration failed" .
when i tried to backup the previous custom on it gives me the same error.
i knows now that the problem from Modem.bin but i don't know why it gives me registration failed
please help me guys i cant now receive any call...don't tell me to try to do any thing in the setting cuz i tried every singe thing.
Thanks
Click to expand...
Click to collapse
Hi,
Search for modem that from your region and install it via ODIN/Custom recovery, or restore your EFS backup.
Edit: Glad to hear that your problem was solved.

krasCGQ said:
Hi,
Search for modem that from your region and install it via ODIN/Custom recovery, or restore your EFS backup.
Click to expand...
Click to collapse
Thanks a lot ... it works (Y)

[H340N] System partition problem

Hi guys! I've recently update to Marshmallow my LG Leon but now system data ocupies 5Gb and I have no space to install more apps... I know a friend of mine happened the same with a LG G2 when he updated the phone but he could'n solve it. I believe it's trash files from the update but I would like to know if it happens to you and how to solve it. Also is there anyone who knows how fresh install a new ROM (international) without the Vodafone bloatware?? I know some tried but the phone detects its not the vodafone one and stars to show an error message...

Wolfillete said:
Hi guys! I've recently update to Marshmallow my LG Leon but now system data ocupies 5Gb and I have no space to install more apps... I know a friend of mine happened the same with a LG G2 when he updated the phone but he could'n solve it. I believe it's trash files from the update but I would like to know if it happens to you and how to solve it. Also is there anyone who knows how fresh install a new ROM (international) without the Vodafone bloatware?? I know some tried but the phone detects its not the vodafone one and stars to show an error message...
Click to expand...
Click to collapse
Same here... "System Data" taking 4.54GB of internal storage.
Have you ever resolved that issue?

I've never managed to solve it. It seems its a common problem of LG's phones...

ZUK Z1 Fingerprint problem ((Acting smart))

So, I have this lenovo device which had an issue with the fingerprint that weren't recognizing my fingerprint so I tried "as a solution" to remove all of the fingerprint of the root of the device.. The result was that I've screwed up .. So I have no fingerprint anymore..
I tried everything (Installing new version "7.1.1" , Installing old version "5.1.1" , Re-flashing stock rom, Wiping system section. EVERYTHING) Put the files didn't came back !
So I need someone has the device working to install the es file manager and search for the word "fingerprint" and upload all the files so i can put them back manually ..
And thanks in advance.. :good::good:

PS:
The fingerprint menu was disappeared at the beginning of my "Screwing up" then after re-flashing the old stock 5.1.1 it came back put the sensor is not sensing anything

UPDATE!!
Now I was trying to add a fingerprint.. When the process starts the device start to vibrate crazly !
here's a screenshot
https://my.pcloud.com/publink/show?code=XZGwg57ZPzn2dhiAwd4wphpRBsl0vpm7S0my

hi i m also same issue plz update solution fast..
hi i m also same issue plz update solution fast..

Same problem for me

Gannu92 said:
hi i m also same issue plz update solution fast..
Click to expand...
Click to collapse
Tried changing the firmware? I think changing the firmware will definitely work. If it doesn't, then Im damn sure that its a hardware issue.