Hi guys.
So i have an Note 3 with HongKong firmware that i want to flash new international/europe firmware as it is not working on europe sim card(i think it will solve the problem...).
The firmware that is installed on it is N9005ZHUENB5 so i thought aha then this is the Hong Kong 16GB version that have flashing problem. But then i found out that the phone is 32 GB and not 16 so it can not be the Hong Kong 16 GB version but it has for some reason the Hongkong firmware on it.
The IMEI number under the batteri is matching the IMEI nr android is showing, but the serial number is not matching.
The weird part is phone INFO app shows this:
SN under batteri: Made in Vietnam
SN andorid show: Made in CHINA
Even weirder:
imei.info is giving me N900 Galaxy Note 3 as Model????
This has made me being carefull falshing it and i am asking you guys to advice me before i start flashing any new firmware. I have rooted and done EFS and pit file backup in case i screw it up.
What do you guys think, will it be safe for me to just download a europe firmware and flash it with odin?
Download and run Phone Info from Play store and post screenshots .
This is the info from Phone info app(attached)
This is not a new phone is it as i see warranty void Knox 0x1 .
Looks like a previous owner has flash a rom .
Thanks for feedback JJEgan.
I have rooted the phone so maybe therefore? The phone has android 4.4.2, however i believe this should not have anything to do with what i want to do. I can flash 4.4.2 or flash 5.0 via odin, but just want advice before i do that.
Thanks
The_Kurd said:
Thanks for feedback JJEgan.
I have rooted the phone so maybe therefore? The phone has android 4.4.2, however i believe this should not have anything to do with what i want to do. I can flash 4.4.2 or flash 5.0 via odin, but just want advice before i do that.
Thanks
Click to expand...
Click to collapse
Well at least you're 32GB - not sure why only HK phones seem to have a 16GB model. You're right to be cautious - there seems to be partition differences also, but if you search for a EU version of the PIT file for v5 Android you will be prepared in case the Odin flash fails. I'd also get SuperSU zip file on your extSDCard and an Odin flash version of TWRP or CWM - untick the Reboot option, flash the firmware you want, (Wait for it to finish completely - it will sit for a while then let you know it is done) then Reset, untick the Reboot again, then flash the Recovery. Reboot phone into Recovery and flash the SuperSU file and restart.
All being well you should boot into the stock firmware and do the set up. Then you can flash whatever ROM you want in Recovery.
If it DOESN'T work, Search for how to fix, and if you can't find what you need, ASK, don't just go playing...
Thanks @Journyman16
Result:
Tried to flash with lolipop stock firmware and my backed up pit file( from andoird 4.4.2))--->Fail/brick with Volume size is too big 4620288 < 4718592 and invalid ext4 image error(Odin setting Auto-reboot and F. reset used)
Tried to flash with lolipop stock firmware and with pit file CSB_signed_HLTE_EUR_OPEN_32G_0805 --->Fail/brick with Volume size is too big 4620288 < 4718592 and invalid ext4 image error(Odin setting Auto-reboot and F. reset used)
Tried to flash with stock HK kitkat 4.4.2 firmware without PIT file---> Success and i am back to stock firmware but that did not solve my call/SIM and wrong serial number
Maybee i should donwload an europe 4.4.2 firmware and try flash with that?
The_Kurd said:
Thanks @Journyman16
Result:
Tried to flash with lolipop stock firmware and my backed up pit file( from andoird 4.4.2))--->Fail/brick with Volume size is too big 4620288 < 4718592 and invalid ext4 image error(Odin setting Auto-reboot and F. reset used)
Tried to flash with lolipop stock firmware and with pit file CSB_signed_HLTE_EUR_OPEN_32G_0805 --->Fail/brick with Volume size is too big 4620288 < 4718592 and invalid ext4 image error(Odin setting Auto-reboot and F. reset used)
Tried to flash with stock HK kitkat 4.4.2 firmware without PIT file---> Success and i am back to stock firmware but that did not solve my call/SIM and wrong serial number
Maybee i should donwload an europe 4.4.2 firmware and try flash with that?
Click to expand...
Click to collapse
I think when you use a PIT for such things you need to tick the re-partition box - if you're going to try it, read up on it. I haven't done it since I had an S3. Mess up the PIT process and it's a bit of work to get the phone working again.
I'm puzzled about the serial number thing - even if the main board was changed, that wouldn't explain it because the IMEI would also change AFAIK. I wonder if the wrong S/No might be the reason you have the SIM/Call issue?
You could now try a factory reset. See if it changes anything. Other than that, research about EFS repair/restore.
You DID have a backup before all this... right?
Fingers-crossed
Journyman16 said:
I think when you use a PIT for such things you need to tick the re-partition box - if you're going to try it, read up on it. I haven't done it since I had an S3. Mess up the PIT process and it's a bit of work to get the phone working again.
I'm puzzled about the serial number thing - even if the main board was changed, that wouldn't explain it because the IMEI would also change AFAIK. I wonder if the wrong S/No might be the reason you have the SIM/Call issue?
You could now try a factory reset. See if it changes anything. Other than that, research about EFS repair/restore.
You DID have a backup before all this... right?
Click to expand...
Click to collapse
Ok guys:
I have one bad news and one good news
The good news: I managed to flash with Poland firmware after advice from @FeralFire(really appreciated, thanks) following his guide here: http://forum.xda-developers.com/showthread.php?t=2613374&page=13 I believe i can now flash any firmware as it is now international pit and firmware
The bad news: I can still not call/sms only data is working, and the serial number is stil diffrent then the one under the batteri. The IMEI is correct though. So i have now ruled out that it was something with HongKong firmware as it seems like this problem is not related to which firmware is in use. I have also tried with Region lock away app but no luck
I do have backup of my EFS and pit file, but the problem is this phone has had difrent serial number from begining so no help from EFS backup i believe?
I will try to digg some more in to EFS repaire threads here on xda and see what i can find, but any threads you guys advice or other tips i can try?
Again thank you for helping me out here: )
Dont remember the solution ( probably efs) look on S2 forum as their where a number of wrong serial posts that may give you a clue .
Related
my n9005 32 gb came from hk with 4.3 sw when i try to upgrade to 4.4.2 its stuck on first progresses in odin with this error Odin: Invalid ext4 Image.
friend of my give me a pit file and the phone take flash without problems but after flashing no base band and imei
1 - root and busybox to replace the mmcblk files but no success
2- flash many modems but no success
3-flash many roms and full roms and the tgy firmware but no success
any another solutions ??
does any body have backup fsg for n9005 32gb cant find it in forum
Deleted. Sorry didnt notice you've flashed Tgy
Rosli59564 said:
Deleted. Sorry didnt notice you've flashed Tgy
Click to expand...
Click to collapse
nvm any idea i think the only way to solve it is a fsg backup from another phone is this right ?
hallo i bought the note 4 n910f before 1 week and i would like to ask why i can not flash any rom with odin exept the german. with the other roms alwais fail or stuck to hidden.
anyone;;;
ADRIKOS22 said:
anyone;;;
Click to expand...
Click to collapse
hey there to root your Note 4 smn910f you first go to settings/security and then you will see a V behind reactivation deactivate this
after that's done connect to odin and flash cf root
you will see that it will not fail
i dont want to root yet i just want to change official rom and i can't flash via odin
it says when odin write hidden.img.ext4 volume size is too big 81920<184320
Can I ask which firmware you are trying to flash? Is it for the 910f if it's for a different variant that will probably be why
I have the German and I want to flash the Greek I downloaded them from sam mobile for the n910f
just came across the same issue something is messed with hidden partition image size, the default partition size is smaller whereas the the img file on the odin file is much bigger
bala_gamer said:
just came across the same issue something is messed with hidden partition image size, the default partition size is smaller whereas the the img file on the odin file is much bigger
Click to expand...
Click to collapse
Got the same problem today, cant flash any rom other than the latest UK (BTU) When trying to flash any other rom I get this message. Any idea how to fix it?
Some serious problem with Odin flashing the n910f. I have just gone through a night of torment, having tried flashing the newest firmware and getting a failure due to the hidden partition problem mentioned above.
Originally, my firmware was on n910fxxu1anj4. I flashed n910fxxu1ank6, the flash failed on flashing the hidden partition with:
Volume Size is too big 81920 < 204800
ODIN: Invalid ext4 image
and the phone was stuck in a bootloop on the first screen with the text “Note 4”.
Then even with wipe, restore of backup etc the phone wouldn't boot.
Flashed n910fxxu1ank5, same failure, didn't record the numbers, couldn't get it to boot in no way...
Flashed the original n910fxxu1anj4, flash failed also on the hidden partition with:
Volume Size is too big 81920 < 471040
Stuck in bootloop, but upon reflash of CWM recovery and cache and data clean, the phone booted, and I was able to restore a backup which works fine now...
However there must be some serious problem.
Anyone have an idea what this is?
--
白い熊
I think we need a correct PIT file for each firmware maybe ?
ADRIKOS22 said:
hallo i bought the note 4 n910f before 1 week and i would like to ask why i can not flash any rom with odin exept the german. with the other roms alwais fail or stuck to hidden.
Click to expand...
Click to collapse
From what I have gathered on some of the models is that the only firmware that you can flash to your phone are the ones made for the CSC of your phone. Navigate to system/csc then look at the different CSC files in that folder. Those are the only ones I can flash on my H model anyways.
CodeNameRedNeck said:
From what I have gathered on some of the models is that the only firmware that you can flash to your phone are the ones made for the CSC of your phone. Navigate to system/csc then look at the different CSC files in that folder. Those are the only ones I can flash on my H model anyways.
Click to expand...
Click to collapse
I had Swedish firmware with CSC NEE and could flash a firmware with CSC BTU. But I cant flash back the NEE firmware again. And looking at the hidden.img.ext4 and cache.img.ext4 in the only firmware I can flash it has the smallest. All the other firmwares have bigger hidden and cache files. So I think the phone needs to flashed with re-partition checked in Odin and that is not possible without the correct PIT file. I am relly tired of this phone, Samsung has made it too complicated to flash firmwares
easycure1974 said:
I had Swedish firmware with CSC NEE and could flash a firmware with CSC BTU. But I cant flash back the NEE firmware again. And looking at the hidden.img.ext4 and cache.img.ext4 in the only firmware I can flash it has the smallest. All the other firmwares have bigger hidden and cache files. So I think the phone needs to flashed with re-partition checked in Odin and that is not possible without the correct PIT file. I am relly tired of this phone, Samsung has made it too complicated to flash firmwares
Click to expand...
Click to collapse
Have you tried using Kies to do a firmware upgrade and initialization? When you plug your phone in Kies may warn you that it doesn't support your phone but you can still do it. You may be better off just leaving it alone though.
CodeNameRedNeck said:
Have you tried using Kies to do a firmware upgrade and initialization? When you plug your phone in Kies may warn you that it doesn't support your phone but you can still do it. You may be better off just leaving it alone though.
Click to expand...
Click to collapse
Yes tried that but with no luck, seems I am stuck with my BTU firmware. It gets the same error message on the phone "size is too big" and got a new error message on the phone [99] eMMC write fail: HIDDEN
Guys I tried flash latest Sweden and have same problem size too big and ext4 failed,then I flash Philz recovery and voila phone booted everything its ok!!!
Ogy77 said:
Guys I tried flash latest Sweden and have same problem size too big and ext4 failed,then I flash Philz recovery and voila phone booted everything its ok!!!
Click to expand...
Click to collapse
What was your original software? Could root have messed this up? Before rooting I flashed the BTU and DBT and NEE firmwares without problem. But then staying at BTU for some weeks and then rooted. And after that I can flash no other firmware. Trying to restore the phone to the NEE firmware as I am going to sell the phone.
Any more input on this? I did the same as Ogy77 and sure the phone boots but I got some strange crashes and did a factory reset and flashed back the stock recovery. So it boots but the CSC is gone as the cache.img.ext not is flashed so no OTAs will work as Kies does not regonize the phone with a firmware witout CSC?
I have the same problem, Im using xnote as i cant flash my vodafone UK stock rom
I was stuck in a bootloop but flashed twrp and installed xnote again as it was stored on my sd card luckily! I would like to know how to flash back to stock
I have same problem. I have a open 910F and get the same error on odin file size is too big. What can i do?
I actually wanted to flash the leaked Lollipop for my new Note 3 but from what I can read it's not safe just yet... i'm not rooted and can't backup my PIT. Also I read a whole lot about wifi-bugs and so on.
But coming from S5 I really want a fresh look on my Note 3 so I thought I'd flash a custom ROM.
If I understand everything correct I have to do the following:
1: Flash custom recovery with ODIN
2: Flash custom ROM from recovery
I don't need to be rooted before I flash a custom recovery with ODIN, right?
I don't care about triggering Knox. I'll just flash the Stock Lollipop when it's available.
Have I got the procedure right?
Manneman32 said:
I actually wanted to flash the leaked Lollipop for my new Note 3 but from what I can read it's not safe just yet... i'm not rooted and can't backup my PIT. Also I read a whole lot about wifi-bugs and so on.
But coming from S5 I really want a fresh look on my Note 3 so I thought I'd flash a custom ROM.
If I understand everything correct I have to do the following:
1: Flash custom recovery with ODIN
2: Flash custom ROM from recovery
I don't need to be rooted before I flash a custom recovery with ODIN, right?
I don't care about triggering Knox. I'll just flash the Stock Lollipop when it's available.
Have I got the procedure right?
Click to expand...
Click to collapse
Yes you are right.
Regarding to backing up the PIT file, it is not necessary to backup the PIT file from your device. You can get a PIT file from the similar device, i.e the device with the same model name and same CSC. You can use Phone INFO ★Samsung★ app to get your Model Name and CSC.
vndnguyen said:
Yes you are right.
Regarding to backing up the PIT file, it is not necessary to backup the PIT file from your device. You can get a PIT file from the similar device, i.e the device with the same model name and same CSC. You can use Phone INFO ★Samsung★ app to get your Model Name and CSC.
Click to expand...
Click to collapse
Allright, thanx!
Where do I find a PIT that matches my model?
Manneman32 said:
Allright, thanx!
Where do I find a PIT that matches my model?
Click to expand...
Click to collapse
First obtain your Model Name and CSC as I have said. Then search on Google, e.g. PIT file N9005 XME, where N9005 is Model Name, XME is CSC.
Ok! I think I´ll stick with 4.4.2 until the official Lollipop comes. Even if I succeed flashing Lollipop I don´t want to risk WiFi-problems and other bugs since I´m not rooted
May I ask where I can find Custom Recovery for Note 3 SM-N9005 32gb 4.4.2 XXUGNI4?
Best regards!
Manneman32 said:
Ok! I think I´ll stick with 4.4.2 until the official Lollipop comes. Even if I succeed flashing Lollipop I don´t want to risk WiFi-problems and other bugs since I´m not rooted
May I ask where I can find Custom Recovery for Note 3 SM-N9005 32gb 4.4.2 XXUGNI4?
Best regards!
Click to expand...
Click to collapse
You can search for CWM or TWRP recovery...
To download correct recovery for your device, you will need Device Type and Product Name (e.g. hlte/hltexx or something like that). You can find it using the above mentioned Phone INFO ★Samsung★ app.
vndnguyen said:
You can search for CWM or TWRP recovery...
To download correct recovery for your device, you will need Device Type and Product Name (e.g. hlte/hltexx or something like that). You can find it using the above mentioned Phone INFO ★Samsung★ app.
Click to expand...
Click to collapse
Well I have begun searching but I can´t really find anything...
Device Type: hlte
Product Name: htlexx
Edit: Is it this one? http://teamw.in/project/twrp2/202
Manneman32 said:
Well I have begun searching but I can´t really find anything...
Device Type: hlte
Product Name: htlexx
Edit: Is it this one? http://teamw.in/project/twrp2/202
Click to expand...
Click to collapse
Here you go:
- TWRP Recovery: http://teamw.in/project/twrp2/202
- CWM Recovery: https://www.clockworkmod.com/rommanager
Sweet! I got it right!
So... ODIN to flash custom recovery and the just flash a pre-rooted ROM and I´m all set?
Thanx a million for the help! The "ThankYou-Button" has been clicked!
I must have done something wrong... Or am I missing something?
I used Odin 3.09 and started it as administrator. Everything connected fine and I selected the .tar-file (the correct one) and the procedure went ok, green across the board! The phone rebooted and still all OK. Shut of the phone and after 30 sec I booted to recovery but the stock one was still there...
Any ideas?
Edit: I found this... Do I dare to use it?
http://forum.xda-developers.com/showpost.php?p=56660810&postcount=31
Manneman32 said:
I must have done something wrong... Or am I missing something?
I used Odin 3.09 and started it as administrator. Everything connected fine and I selected the .tar-file (the correct one) and the procedure went ok, green across the board! The phone rebooted and still all OK. Shut of the phone and after 30 sec I booted to recovery but the stock one was still there...
Any ideas?
Edit: I found this... Do I dare to use it?
http://forum.xda-developers.com/showpost.php?p=56660810&postcount=31
Click to expand...
Click to collapse
Sorry I have no idea as I'm currently on the stock recovery after upgrading to 4.4.2.
Try to google search for the solution...
I made it work. I flashed TWRP with ODIN again but I unticked AutoReboot. When the flash was done I pulled the battery and rebooted straight to recovery. Since I had the new ROM on my SD-card I could flash it straight away.
Problem solved!
Hey, guys, I have a question: I HEARD that the original IMEI of the Note 4 (I have the N910C - TCE) is read from the motherboard, but I also heard that if you don't have a backup of your /efs folder from the original stock ROM then you're screwed?
Do anyone of you all know anything about this? Problem is: I flashed a ROM on my phone and it wiped my IMEI, replacing it with a generic IMEI (350050500009692), and now I can't get it back without a backup of the /EFS folder?
I would REALLY appreciate your guys' help as its been at least a week and a half since I lost network service... if you guys need more screenshots, just ask and I'll post them.
Flash stock rom with odine wipe everything using a pit file...
I hope that will resolve your problem.
My friend have done the same thing. I flashed stock ROM from sammobile with Odin and IMEI was back and network service was back.
http://www.sammobile.com/firmwares/database/SM-N910C/
@webmaster750, should it be my phone-specific firmware or just a stock firmware (regardless of region)? Thank you for the reassurance, man.
@jemis1983, should the .pit file be specific to my firmware region?
vince.lupe said:
@jemis1983, should the .pit file be specific to my firmware region?
Click to expand...
Click to collapse
The pit file should be specific to your model of note 4
you have N910C EXYNOS try first to flash your stock rom without pit if that didn't fix it flash using the pit file.
take a loock in this theard;
http://forum.xda-developers.com/note-4/general/firmwares-galaxy-note-4-factory-t2912125
jemis1983 said:
The pit file should be specific to your model of note 4
you have N910C EXYNOS try first to flash your stock rom without pit if that didn't fix it flash using the pit file.
take a loock in this theard;
http://forum.xda-developers.com/note-4/general/firmwares-galaxy-note-4-factory-t2912125
Click to expand...
Click to collapse
Okay, thank you! I already tried to flash another region on 5.1.1 with and without the .pit file, but it would not fix the problem, so do you think I need to flash my firmware for my specific serial number? Like the firmware that would be downloaded from Kies or Samsung Smart Switch?
vince.lupe said:
Okay, thank you! I already tried to flash another region on 5.1.1 with and without the .pit file, but it would not fix the problem, so do you think I need to flash my firmware for my specific serial number? Like the firmware that would be downloaded from Kies or Samsung Smart Switch?
Click to expand...
Click to collapse
Do you nand erase your phone with the pit file using odine???
Should I nand erase all?
vince.lupe said:
Should I nand erase all?
Click to expand...
Click to collapse
yep:good:
Make a current efs backup before...
Okay, but why make a EFS backup before when my IMEI is all screwed up?
vince.lupe said:
@webmaster750, should it be my phone-specific firmware or just a stock firmware (regardless of region)? Thank you for the reassurance, man.
Click to expand...
Click to collapse
Yes, specific for Your country or/and provider.
In my friend case I download and flashed the 5.1.1. CROATIA(VIP) firmware.
vince.lupe said:
Okay, but why make a EFS backup before when my IMEI is all screwed up?
Click to expand...
Click to collapse
Make it the same thing if you can make call if not you should not need it.
@jemis1983 and @webmaster750
Thank you, you guys ☺ Okay, let me get this straight: so, I'm going to flash my firmware for my phone's specific serial number (more specific than my own region) through Odin when available and enable "nand erase all" with my specific .pit file as well? With no backup of my EFS (cannot make a call at all)?
vince.lupe said:
@jemis1983 and @webmaster750
Thank you, you guys Okay, let me get this straight: so, I'm going to flash my firmware for my phone's specific serial number (more specific than my own region) through Odin when available and enable "nand erase all" with my specific .pit file as well? With no backup of my EFS (cannot make a call at all)?
Click to expand...
Click to collapse
did this work for you?
vince.lupe said:
@jemis1983 and @webmaster750
Thank you, you guys Okay, let me get this straight: so, I'm going to flash my firmware for my phone's specific serial number (more specific than my own region) through Odin when available and enable "nand erase all" with my specific .pit file as well? With no backup of my EFS (cannot make a call at all)?
Click to expand...
Click to collapse
Unfortunately bro you will not get anything, l know my words very disappointing but efs or serial number is special information stored in your phone (emmc)by special partition and if you wiped that ,then you lost your serial number forever,
You have only two way?
1-go to Samsung service and they will repair your phone and will back your stock serial number but that will cost you much money (200) $ or more :crying::crying:
2-anyone with zx3 box or octopus box will fix it but another serial number you will get
Super imei and that will 50$or less
medo sator said:
Unfortunately...
Click to expand...
Click to collapse
@medo sator, two questions:
1. How do I know if my emmc partition is ruined? What if it's just my EFS folders?
2. What is Super IMEI like you mentioned in your comment above?
I have the same IMEI problem and have used odin and samsung tools pro with no change, also i tried reseting efs and nothing. It's a model SM-G750A galaxy mega 2 and i'm out of ideas or exhausted every search, what can i do?
Thanks,
Ok first install https://www.androidfilehost.com/?fid=24459283995315430 that is MM stock rom for N910C. In odin under options please check auto reboot, reparation, f. reset time, nand erase all, phone efs clear and phone bootloader update. Just in case it asks for the pit click on the pit tab and select the N910C pit you can extract in this firmware. I posted the pit as an attachment just encase you can not figure out how to get the pit file.
Will this work for my sm-g750a galaxy mega 2 also?
Sent from my SAMSUNG-SM-G750A using XDA Free mobile app
Hello guys,
My note 4 was having some reboot problems and when I try to boot in recovery mode I was getting error that it couldn't boot in normal mode.
I read somewhere that I should be doing a clean flash for the PIT file and the stock Rom, I started with the PIT file and it went perfectly with Odin.
But later when I tried flashing the ROM, it fails with the following errors:
- ODIN: flash read failure
- ERROR: There is no pit binary
I'm sure I have used the exact pit file for my model, I've tried flashing the Rom and the pit file at the same time but always the same error, now even retrying to flash the PIT file fails.
I'm wondering if there is any way I can fix this problem.
Thank you
binpax said:
Hello guys,
My note 4 was having some reboot problems and when I try to boot in recovery mode I was getting error that it couldn't boot in normal mode.
I read somewhere that I should be doing a clean flash for the PIT file and the stock Rom, I started with the PIT file and it went perfectly with Odin.
But later when I tried flashing the ROM, it fails with the following errors:
- ODIN: flash read failure
- ERROR: There is no pit binary
I'm sure I have used the exact pit file for my model, I've tried flashing the Rom and the pit file at the same time but always the same error, now even retrying to flash the PIT file fails.
I'm wondering if there is any way I can fix this problem.
Thank you
Click to expand...
Click to collapse
I bet 100$ (which you'll pay) that nobody can find in your message the hidden sentence about the model of your note 4.
If, by the grace of the literate and smart people here, someone can 100% say that your phone is a 910F or similar model with a Snapdragon CPU, then...
Maybe your phone has a health problem plague called eMMC failure.
Or so it looks like.
You want my paypal account ? :silly:
Did you try newer versions of Odin?
And try also the PC app of Samsung - SmartSwitch - it can flash the original firmware based on the SN of your phone (located under the battery).
Read some more about these steps and try.
Tho, it looks like a dead emmc.
w41ru5 said:
I bet 100$ (which you'll pay) that nobody can find in your message the hidden sentence about the model of your note 4.
If, by the grace of the literate and smart people here, someone can 100% say that your phone is a 910F or similar model with a Snapdragon CPU, then...
Maybe your phone has a health problem plague called eMMC failure.
Or so it looks like.
You want my paypal account ? :silly:
Did you try newer versions of Odin?
And try also the PC app of Samsung - SmartSwitch - it can flash the original firmware based on the SN of your phone (located under the battery).
Read some more about these steps and try.
Tho, it looks like a dead emmc.
Click to expand...
Click to collapse
Sorry man, I forgot to mention my phone model, which is N910F.
The eMMC failure error only showed once on the recovery mode.
I've tried different versions of Odin, 3.13, 3.10 and 3.09, same error.
I also tried with SmartSwitch but for some reason they say that my model is not supported.
binpax said:
Sorry man, I forgot to mention my phone model, which is N910F.
The eMMC failure error only showed once on the recovery mode.
I've tried different versions of Odin, 3.13, 3.10 and 3.09, same error.
I also tried with SmartSwitch but for some reason they say that my model is not supported.
Click to expand...
Click to collapse
Interesting, I have an 910C (Exynos) and the SmartSwitch worked for me - I've had a soft brick too.
Oh, well... don't have too many hopes for the emmc issue. As far as it's known this means death.
Sorry for your loss.
try maybe
https://forum.xda-developers.com/note-4/help/100-fix-galaxy-note-4-emmc-error-random-t3859448
SAMSUNG SM-N915FY ODIN: Flash read failure ERROR: There is no pit binary
raul6 said:
try maybe
https://forum.xda-developers.com/note-4/help/100-fix-galaxy-note-4-emmc-error-random-t3859448
Click to expand...
Click to collapse
Good day! I just want to ask. I want to flash the firmware of my samsung SM-N915FY. But when I flash the firmware that I downloaded, this is the prompt message:
ODIN: Flash read failure
ERROR: There is no pit binary
Can someone help me with this
#19
I have fixed when up wrong file pit
My phone is samsung note9 128gb
When i try to up file pit on rom . I had loss my store from 128gb to 32gb
I don't find any solotion on web
And i have go to setting , open development setting. Choose lock OEM. After that my phone restart and recover to 128gb
Please share this solution . I hope it can help many people up wrong file pit and loss data store like me .
File up wrong pit file odin by Lock Oem
Recover Lost data store .
Mã Lạc said:
#19
I have fixed when up wrong file pit
My phone is samsung note9 128gb
When i try to up file pit on rom . I had loss my store from 128gb to 32gb
I don't find any solotion on web
And i have go to setting , open development setting. Choose lock OEM. ......
Click to expand...
Click to collapse
This here is the forum for Note 4.
That has no OEM unlock option.