Warning - XT1060 Blur_Version.212.55.26 blocks custom recoveries - Moto X General

Exactly as the title says ... after flashing this update, even if unlocked, you can no longer flash a custom recovery.
Fastboot will show a successful flash, e.g. :
mfastboot.exe flash recovery twrp-2.8.6.0-ghost.img
sending 'recovery' (9488 KB)...
OKAY [ 0.849s]
writing 'recovery'...
OKAY [ 0.969s]
finished. total time: 1.819s
Click to expand...
Click to collapse
But when you try to boot recovery, it's stock recovery.
This makes any attempt to flash a rom, regain root, etc. impossible.

And you are booting straight to recovery after flashing via volume down and then volume up to select not the power button?

_litz said:
Exactly as the title says ... after flashing this update, even if unlocked, you can no longer flash a custom recovery.
Fastboot will show a successful flash, e.g. :
But when you try to boot recovery, it's stock recovery.
This makes any attempt to flash a rom, regain root, etc. impossible.
Click to expand...
Click to collapse
After you flash TWRP, at the command prompt type:
fastboot reboot-bootloader
I can't remember where I read it but some people said they had to do that to get the custom recovery to stick.
THEN unplug your device from your computer and reboot into recovery by scrolling down with the volume down button to highlight recovery and then hitting the volume up button to select recovery.

Ok, figured this out ...
(was able to back down to the original 4.4.4 w/rsd-lite and regain TWRP ... to develop this process)
So ... the following can be done to upgrade to this new version, and retain TWRP (plus you have the new recovery later on for 5.1 when it comes along ...)
First, the presumption here is you are unlocked. If you are not, none of this will work.
Also, you will need RSD-Lite installed and operational.
Download :
https://dl.dropboxusercontent.com/u...RIZON_4.4.4_KXA21.12-L1.26-3_cid2_1FF.xml.zip
https://dl.dropboxusercontent.com/u...4.4.4_KXA21.12-L1.26-3/twrp-2.8.6.0-ghost.img
https://dl.dropboxusercontent.com/u/22067374/GHOST_VERIZON_4.4.4_KXA21.12-L1.26-3/servicefile.xml
Unpack the GHOST zip file, and overwrite the "servicefile.xml" in the unpacked folder w/the one you downloaded, then copy the twrp .img in there.
Fire up RSD-Lite, put your phone in fastboot, and apply this update by loading the servicefile.xml as the update.
It will update everything, installing the TWRP instead of the new stock recovery.
Note: you can delete the twrp line in servicefile.xml if you wish to retain your existing custom recovery.
When done, you should reboot, update, and be up and running with the new 4.4.4 and TWRP ... so easy path back to root via TWRP.

_litz said:
Ok, figured this out ...
Click to expand...
Click to collapse
I think all that needs to happen is after you flash TWRP - you don't boot into recovery. Instead, reboot into bootloader mode. This has been a problem from the beginning for some people with their MX13's and not a new thing. I don't think it has anything to do with the update. Some people have to reboot into bootloader after flashing TWRP in order to get it to stick for some reason.

@_litz Please understand that @JulesJam is correct... the proper way to flash a recovery is as follows...
Start the phone to the Fastboot AP/Bootoader menu
using moto's fastboot (aka mfastboot) exectue the following...
mfastboot flash recovery RecoveryYouWishToFlash.img
mfastboot reboot-bootloader
Then use the volume/power keys to enter recovery.
Once in the recovery, it is safe to Reboot the phone normally.
that mfastboot reboot-bootloader step has been crucial for getting the newly flashed recovery (3rd party OR Stock!) to "stick" on the phone.
Flashing with RSDLite is over kill.

You'd think that would be the case, right?
Except those EXACT STEPS ... didn't work.
If you attempted to boot into recovery directly from the bootloader, it rebooted the phone, which booted the OS.

_litz said:
You'd think that would be the case, right?
Except those EXACT STEPS ... didn't work.
If you attempted to boot into recovery directly from the bootloader, it rebooted the phone, which booted the OS.
Click to expand...
Click to collapse
And you used volume up to enter recovery after flashing twrp? That is the most common problem I see.

_litz said:
You'd think that would be the case, right?
Except those EXACT STEPS ... didn't work.
If you attempted to boot into recovery directly from the bootloader, it rebooted the phone, which booted the OS.
Click to expand...
Click to collapse
That is because you are pressing the power button when you should be pressing the volume up button.

Yep ... ain't my first rodeo ....
It flat out refused to take recovery.
I had to back it back down to the old 4.4.4 version, reflash TWRP, then I simply applied the whole RSD package (sans recovery) to re-upgrade it to the new 4.4.4.
Worked like a charm.
(Plus it gave me a chance to extract the fxz from the moto manager app)

Travisdroidx2 said:
And you used volume up to enter recovery after flashing twrp? That is the most common problem I see.
Click to expand...
Click to collapse
yes, that is what is happening.

See above ... this isn't my first time at this. Was not working as described.

_litz said:
See above ... this isn't my first time at this. Was not working as described.
Click to expand...
Click to collapse
Was not trying to insult your knowledge. That is a very common problem that many do. So I had to ask.

_litz said:
See above ... this isn't my first time at this. Was not working as described.
Click to expand...
Click to collapse
You needed to reboot into bootloader by typing fastboot reboot-bootloader after your flashed TWRP. THEN disconnect your phone from your computer and boot into recovery by using the volume down to highlight recovery and volume up to select recovery.
If you follow those instructions, you will flash TWRP fine. No need to go through that long drawn out process you came up with.

Probably should rename or delete this thread, since its fairly misleading.

Check in the /system partition for a file named recovery-from-boot.p or something similar. If that file is there it will reflash the stock recovery when you reboot, and I've seen it reflash when booting into recovery.

I just used the TWRP manager app from the Play store after reverting to stock recovery and installing the OTA. It worked perfectly the first time.
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager

_litz said:
You'd think that would be the case, right?
Except those EXACT STEPS ... didn't work.
If you attempted to boot into recovery directly from the bootloader, it rebooted the phone, which booted the OS.
Click to expand...
Click to collapse
I'm curious as to what is different.. because the other day after flashing stock recovery back on my phone, taking the update to 212.166.3 KXA21.12-L1.26-3 which Verizon just pushed, I used those EXACT STEPS to put TWRP back on my phone and had no problems.

Beats me ... for me, it didn't work ...
So after I got things back onto the old 4.4.4 version, I put together the FXZ with the modified xml file, and simply re-updated, applying both the update, and TWRP, all in one go.
anyone else on old 4.4.4 can do the same thing if they wish, which was why I posted the links and the instructions.

not to bump this thread, but I had zero issues going from stock with 212.55.26 ota update installed and flashing twrp. it just worked like normal.
i would agree with @superkeest seems like this thread should get renamed.

Related

updated to 4.4.1 stuck in boot animation!

Installed 4.4.1 via TWRP this morning, but it is stuck in reboot. Just keeps doing the colliding circles!
Tried rebooting a couple of times. Can get to fastboot, But device isn't seen by adb, and fastboot only shows start (no recovery option)
Any ideas at this point?
RedBullet said:
Installed 4.4.1 via TWRP this morning, but it is stuck in reboot. Just keeps doing the colliding circles!
Tried rebooting a couple of times. Can get to fastboot, But device isn't seen by adb, and fastboot only shows start (no recovery option)
Any ideas at this point?
Click to expand...
Click to collapse
I would recommend flashing the 4.4 stock factory image from here in fastboot mode. Then once your device is booting up properly again I would recommend taking a look at this guide to properly install the 4.4.1 update.
You MUST either side load or safer still, un-root(if rooted) and flash stock recovery and sideload and then re-flash custom recovery and re-root if needed.
If you are able to get to fastboot:
Fastboot flash recovery recovery.img ( use stock)
Fastboot reboot-bootloader
go into to stock recovery - wait for dead droid, one you see him, go into recovery by holding volume+ and power at same time
follow the orange instructions to sideload via adb - which should now work
reboot and validate all is well
reboot into bootloader and re-flash your custom recovery and root (if needed)
Enjoy.
planet_x69 said:
You MUST either side load or safer still, un-root(if rooted) and flash stock recovery and sideload and then re-flash custom recovery and re-root if needed.
If you are able to get to fastboot:
Fastboot flash recovery recovery.img ( use stock)
Fastboot reboot-bootloader
go into to stock recovery - wait for dead droid, one you see him, go into recovery by holding volume+ and power at same time
follow the orange instructions to sideload via adb - which should now work
reboot and validate all is well
reboot into bootloader and re-flash your custom recovery and root (if needed)
Enjoy.
Click to expand...
Click to collapse
Thanks, I eventually got it. I was really puzzled that I couldn't select recovery from the bootloader. All set now though, thanks!
I hae also updated to 4.4.2 but now my N10 is stuck at the Google start page. Please help?
jalize said:
I hae also updated to 4.4.2 but now my N10 is stuck at the Google start page. Please help?
Click to expand...
Click to collapse
If you mean stuck at boot animation, then I suspect you used TWRP to flash?
I found that TWRP was not able to clear caches, so I use CWM instead. Worked like a champ...
RedBullet said:
If you mean stuck at boot animation, then I suspect you used TWRP to flash?
I found that TWRP was not able to clear caches, so I use CWM instead. Worked like a champ...
Click to expand...
Click to collapse
No I used the adb sideload command for the OTA. That all went well but now I'm stuck at the google page even before the animations begin!
jalize said:
No I used the adb sideload command for the OTA. That all went well but now I'm stuck at the google page even before the animations begin!
Click to expand...
Click to collapse
Hold volume up and power to get it to recycle, and immediately hold all three buttons down to get to bootloader. Try clearing your caches from recovery
RedBullet said:
Hold volume up and power to get it to recycle, and immediately hold all three buttons down to get to bootloader. Try clearing your caches from recovery
Click to expand...
Click to collapse
Tried that already, still stuck at Google page before animations. Everything is stock on this tablet with root.
jalize said:
Tried that already, still stuck at Google page before animations. Everything is stock on this tablet with root.
Click to expand...
Click to collapse
Hi,
Try flashing it fresh stock again, factory reset your device from recovery, download the stock image file from here, untar it, then unzip the zip inside the tar and you'll get some files (.img). Copy those files to your fastboot folder and then open a cmd there. (Guessing that you're using Windows)
Code:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash cache cache.img
If you're using Linux, do the same, but instead of only fastboot use:
Code:
sudo ./fastboot
Then boot it. I had the same problem when I updated mine to 4.4.1, but I did one thing a little different... Instead of fully "stocking" it again, I flashed back 4.3, flashed 4.4 OTA and then let it boot, without wiping my data, after all it was running like this before. Worked. But as I'm unsure of your situation I think it's more secure and easier to fully stock it again.
Hope this helps,
~Lord
PS.: Remember to put your device in fastboot mode!

Cannot flash TWRP. Stock recovery is persistent

Hi,
In order to update my phone to oxygenOS 2.2. I flashed oxygenOS 2.1.1 full rom and installed the OTA update for 2.2. Because of this the phone switched back to stock recovery. So I tried to install TWRP recovery through fastboot. The installation was successful but after reboot, it looks like the phone is keep switching back to stock recovery. I have tried this many times but same result everytime.
Note1: I did turned on the USB debugging before this.
Note2: Bootloader is unlocked.
Any help would be great. Thanks in advance!!
When TWRP asks you to modify system partition give it permission to do so at the start of booting to recovery
Akhil701 said:
When TWRP asks you to modify system partition give it permission to do so at the start of booting to recovery
Click to expand...
Click to collapse
The problem is that I dont see TWRP even once after flashing it. After flashing when I reboot to recovery, it directly shows me default recovery. When I said its switching back to stock recovery, because the flashing of twrp was successful, I am assuming that it is switching back to stock recovery.
Dreckk said:
The problem is that I dont see TWRP even once after flashing it. After flashing when I reboot to recovery, it directly shows me default recovery. When I said its switching back to stock recovery, because the flashing of twrp was successful, I am assuming that it is switching back to stock recovery.
Click to expand...
Click to collapse
I also experienced this the first time. But I just ran fastboot flash recover openrecover-twrp-2.8.7.0.img one more time and then rebooted the phone and pressed volume down until it entered TWRP.
pitrus- said:
I also experienced this the first time. But I just ran fastboot flash recover openrecover-twrp-2.8.7.0.img one more time and then rebooted the phone and pressed volume down until it entered TWRP.
Click to expand...
Click to collapse
Did that many times, but it keeps getting entering in the default recovery.
What happens when you boot twrp with fastboot instead of flashing?
Also probably shouldn't flash an ota 2 versions different than the full. If that was the full version you already had, should have flashed 2.1.2 ota then the 2.2.0 ota.
I'm having the same issue. I was able to boot into TWRP once from Fastboot, flashed SuperSU it said it was successful, then I rebooted. Root was not available, and stock recovery was back.
Chris_el said:
I'm having the same issue. I was able to boot into TWRP once from Fastboot, flashed SuperSU it said it was successful, then I rebooted. Root was not available, and stock recovery was back.
Click to expand...
Click to collapse
Don't know if will work... but boot to twrp from fastboot then flash twrp from within twrp.
khaos64 said:
Don't know if will work... but boot to twrp from fastboot then flash twrp from within twrp.
Click to expand...
Click to collapse
Hmm i'll give that a shot when I get home from work. Thanks.
Chris_el said:
Hmm i'll give that a shot when I get home from work. Thanks.
Click to expand...
Click to collapse
fastboot boot /path/to/twrp
then Swipe to allow modifications!
Yash98 said:
fastboot boot /path/to/twrp
then Swipe to allow modifications!
Click to expand...
Click to collapse
I get the error "FAILED remote: dtb not found'

How to flash TWRP and Root Moto X Style on Marshmallow

I am using moto x style and unlocked bootloader with 'Windroid Universal Android Toolkit' v2.5 but cannot flash TWRP and root this apl. Today I tried flash TWRP and then root but after showing 'Congratulation' pop up,my phone stucked on 'No command' page. I tried twice and same result. Later i check there is either no TWRP or root by SuperSU. And i see youtube video and and read many XDA forum and comments and most of the users says the phone stuck on M logo page when reboot after the root process. And all says its a issue with Marshmallow. And most of the xda posts and youtube video are made during 5.1.1 so there is no problem in that video during flash TWRP and root. So i need a seamless process to flash TWRP and root on Marshmallow so that it doesnot stuck on M logo. And I dont want to downgrade to L for root. And unluckily if it stuck M logo thwn what to do to go back to home screen?Thank you.
http://forum.xda-developers.com/moto-x-style/general/guide-how-to-root-pure-style-t3503958
Look in my sig...
It's in my signature... There are multiple links to what your looking for and other threads, if you are on computer they should be immediately below the message, if you're in the XDA app you have to look in the user profile (don't think it's possible in Tapatalk though).
http://forum.xda-developers.com/moto-x-style/general/guide-how-to-root-pure-style-t3503958
acejavelin said:
It's in my signature... There are multiple links to what your looking for and other threads, if you are on computer they should be immediately below the message, if you're in the XDA app you have to look in the user profile (don't think it's possible in Tapatalk though).
http://forum.xda-developers.com/moto-x-style/general/guide-how-to-root-pure-style-t3503958
Click to expand...
Click to collapse
My build no is 24.49-18-4. So is this process suitable for this build no? And still i dont flash TWRP. I tried with "Windroid Universal Android Toolkit app" to flash TWRP. though it showed a 'Successful' pop up but it didn't. Can I go with any old process to flash TWRP or u have a new process?
Atanu Mukherjee said:
My build no is 24.49-18-4. So is this process suitable for this build no? And still i dont flash TWRP. I tried with "Windroid Universal Android Toolkit app" to flash TWRP. though it showed a 'Successful' pop up but it didn't. Can I go with any old process to flash TWRP or u have a new process?
Click to expand...
Click to collapse
Step 1 - Stop using toolkits! They rarely work right on modern Android devices. With the Moto the only safe, reliable way to root is manually.
I don't know what the 'old way' is to flash TWRP your referring to here... I recommend one time booting twrp with "fastboot boot twrp.img" command (replace twrp.img with your actual twrp image file) then perform a backup to the SD card or USB OTG device and put it away for safe keeping. Then flash twrp either with twrp you have booted, or manually with "fastboot flash recovery twrp.img"
The rooting method I linked before is valid for all Marshmallow builds, if you have Lollipop or Nougat you need to find a different method.
acejavelin said:
Step 1 - Stop using toolkits! They rarely work right on modern Android devices. With the Moto the only safe, reliable way to root is manually.
I don't know what the 'old way' is to flash TWRP your referring to here... I recommend one time booting twrp with "fastboot boot twrp.img" command (replace twrp.img with your actual twrp image file) then perform a backup to the SD card or USB OTG device and put it away for safe keeping. Then flash twrp either with twrp you have booted, or manually with "fastboot flash recovery twrp.img"
The rooting method I linked before is valid for all Marshmallow builds, if you have Lollipop or Nougat you need to find a different method.
Click to expand...
Click to collapse
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
I am saying about this official method which is on twrp.me site. And after typing 'fastboot reboot' what I have to do to go home page? Sorry to ask u so many things. Actually I am totally new in this thing and very much worry after facing issues 2-3 times. And thank u very much for fast reply.
One more ques, I have unlocked bootloader with that "Windroid Universal Android Toolkit". Now in fastboot it shows 'bootloader unlocked,code 3' is that ok? As u say toolkit doesnot work on modern devices.
Atanu Mukherjee said:
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
I am saying about this official method which is on twrp.me site. And after typing 'fastboot reboot' what I have to do to go home page? Sorry to ask u so many things. Actually I am totally new in this thing and very much worry after facing issues 2-3 times. And thank u very much for fast reply.
One more ques, I have unlocked bootloader with that "Windroid Universal Android Toolkit". Now in fastboot it shows 'bootloader unlocked,code 3' is that ok? As u say toolkit doesnot work on modern devices.
Click to expand...
Click to collapse
So Moto is a tad different... After you flash recovery, do not reboot with fastboot, instead use the Vol Dn key select Recovery and press Power to start it. When the splash screen comes up, allow changes to system, then I the TWRP main menu select Reboot - Recovery, the device will start TWRP again and it should be "locked" in. From there perform the rooting.
acejavelin said:
So Moto is a tad different... After you flash recovery, do not reboot with fastboot, instead use the Vol Dn key select Recovery and press Power to start it. When the splash screen comes up, allow changes to system, then I the TWRP main menu select Reboot - Recovery, the device will start TWRP again and it should be "locked" in. From there perform the rooting.
Click to expand...
Click to collapse
That mean after typing fastboot flash recovery twrp.img press enter and then i can plug off the usb keeping my device on fastboot then changes to recovery and do the rest?
Btw suppose if i dont want to root it at that time,then what i do? I mean just after flash recovery how to go to home screen without rooting?
And when i want to perform root process later,after installing SuperSU zip if I press power button and vol down then may I go to twrp recovery or ph stock recovery?
Atanu Mukherjee said:
That mean after typing fastboot flash recovery twrp.img press enter and then i can plug off the usb keeping my device on fastboot then changes to recovery and do the rest?
Btw suppose if i dont want to root it at that time,then what i do? I mean just after flash recovery how to go to home screen without rooting?
And when i want to perform root process later,after installing SuperSU zip if I press power button and vol down then may I go to twrp recovery or ph stock recovery?
Click to expand...
Click to collapse
OK... I'm confused, why are you unlocking and installing twrp if your not going root or flash a custom ROM?
acejavelin said:
OK... I'm confused, why are you unlocking and installing twrp if your not going root or flash a custom ROM?
Click to expand...
Click to collapse
I will definately do so. I also want to use CM14.1 but i want to do so step by step. Actually after facing issues 2-3 times i am little bit worry now. That is true. So hesitate to perform both at a single time.
Atanu Mukherjee said:
I will definately do so. I also want to use CM14.1 but i want to do so step by step. Actually after facing issues 2-3 times i am little bit worry now. That is true. So hesitate to perform both at a single time.
Click to expand...
Click to collapse
You don't need to root if your going CM, flash TWRP, backup, and flash CM. You don't need to over complicate it.
If you boot (not flash) TWRP and backup then get a copy to safe place there is little risk of anything going wrong.
acejavelin said:
You don't need to root if your going CM, flash TWRP, backup, and flash CM. You don't need to over complicate it.
If you boot (not flash) TWRP and backup then get a copy to safe place there is little risk of anything going wrong.
Click to expand...
Click to collapse
Ok. But is there any regular chance of going wrong during flash TWRP or flash CM? I backed up all internal important data to external sd card and when I perform these process I just remove that sd from phone.
You pls tell me how to go to home screen after flashing TWRP?
And if I need to root it later then also what to do then? I mean if then I press power and vol minus then will I get TWRP recovery to root it or it will be redirectred to phone custom recovery?
Atanu Mukherjee said:
Ok. But is there any regular chance of going wrong during flash TWRP or flash CM? I backed up all internal important data to external sd card and when I perform these process I just remove that sd from phone.
You pls tell me how to go to home screen after flashing TWRP?
And if I need to root it later then also what to do then? I mean if then I press power and vol minus then will I get TWRP recovery to root it or it will be redirectred to phone custom recovery?
Click to expand...
Click to collapse
There is always a chance of something going wrong, no one can guarantee everything will be fine. We have had people do everything perfectly but something happens and it's bricked... It's rare but does happen.
After you flash TWRP in the bootloader, press Vol Dn until it says Recovery and press power to start it, after several seconds you will get a screen that will ask if it can write to system, select yes, the next screen will be the TWRP home screen.
Once you flash TWRP, your stock recovery is gone, but you access it the same way... Power off, press and hold PWR+Vol Dn and in the bootloader menu select Recovery and press power.
acejavelin said:
There is always a chance of something going wrong, no one can guarantee everything will be fine. We have had people do everything perfectly but something happens and it's bricked... It's rare but does happen.
After you flash TWRP in the bootloader, press Vol Dn until it says Recovery and press power to start it, after several seconds you will get a screen that will ask if it can write to system, select yes, the next screen will be the TWRP home screen.
Once you flash TWRP, your stock recovery is gone, but you access it the same way... Power off, press and hold PWR+Vol Dn and in the bootloader menu select Recovery and press power.
Click to expand...
Click to collapse
Thank you very much for your kind guidance and quick reply. I will perform this may be tomorrow and then inform you. If it is bricked or stucked in any stage/page then is there any instant process to go back to safety?
acejavelin said:
There is always a chance of something going wrong, no one can guarantee everything will be fine. We have had people do everything perfectly but something happens and it's bricked... It's rare but does happen.
After you flash TWRP in the bootloader, press Vol Dn until it says Recovery and press power to start it, after several seconds you will get a screen that will ask if it can write to system, select yes, the next screen will be the TWRP home screen.
Once you flash TWRP, your stock recovery is gone, but you access it the same way... Power off, press and hold PWR+Vol Dn and in the bootloader menu select Recovery and press power.
Click to expand...
Click to collapse
I am listing here only the commands,u just tell me is this ok?
adb devices
adb reboot bootloader
fastboot devices
fastboot flash recovery twrp.img
fastboot boot twrp.img
Will these commands directly take me to twrp page?
And here I put a pic of the twrp page. If I dont want to root it then what to do? Click reboot option or anything else to do?
Atanu Mukherjee said:
I am listing here only the commands,u just tell me is this ok?
adb devices
adb reboot bootloader
fastboot devices
fastboot flash recovery twrp.img
fastboot boot twrp.img
Will these commands directly take me to twrp page?
And here I put a pic of the twrp page. If I dont want to root it then what to do? Click reboot option or anything else to do?
Click to expand...
Click to collapse
Your last two are redundant, either flash or boot, you don't have to do both, but each has a purpose... Flash is permanent, boot is transient and will disappear on a reboot.
Boot TWRP first, the first time it will not take you to the main page initially but show you a notification page asking if you want allow it to make changes to the system or keep it read-only, this time only do not allow changes... Then the main screen of TWRP will be displayed and you should do a full backup of all partitions to the SD card.
Flash will just write the recovery partition, it doesn't start anything, you select recovery from the fastboot menu to start it.
acejavelin said:
Your last two are redundant, either flash or boot, you don't have to do both, but each has a purpose... Flash is permanent, boot is transient and will disappear on a reboot.
Boot TWRP first, the first time it will not take you to the main page initially but show you a notification page asking if you want allow it to make changes to the system or keep it read-only, this time only do not allow changes... Then the main screen of TWRP will be displayed and you should do a full backup of all partitions to the SD card.
Flash will just write the recovery partition, it doesn't start anything, you select recovery from the fastboot menu to start it.
Click to expand...
Click to collapse
So after "fastboot boot twrp.img" i have to allow to make changes and have to do a nandroid backup. After that will I get option to "Reboot?"
And later when I went to recovery I will get twrp page instead of stock recovery? 1st I think I should flash cm13 then root then upgrade to 14.1 bcz still a feel little worry to root it on stock rom.
Atanu Mukherjee said:
So after "fastboot boot twrp.img" i have to allow to make changes and have to do a nandroid backup. After that will I get option to "Reboot?"
And later when I went to recovery I will get twrp page instead of stock recovery? 1st I think I should flash cm13 then root then upgrade to 14.1 bcz still a feel little worry to root it on stock rom.
Click to expand...
Click to collapse
No, almost every part of what your saying is wrong...
Boot twrp and do not allow changes first time and backup. This will give a clean backup to restore from if things go badly.
After this is complete, in TWRP go to Reboot menu and select Bootloader, flash TWRP, do not reboot but use the bootloader menu to start TWRP. This time allow it to make changes to system. At the main menu if twrp go to Reboot - Recovery the device will restart and TWRP will load automatically, this step will lock in twrp so the stock OS doesn't replace it.
You only need to root stock rom, you don't need to root CM roms as they are already rooted (there are a few roms that are not pre-rooted but they are rare and none of the ones your talking about). As far as CM 13 vs 14.1 I can't really help you but from I've read both are stable enough for a daily driver device.
acejavelin said:
No, almost every part of what your saying is wrong...
Boot twrp and do not allow changes first time and backup. This will give a clean backup to restore from if things go badly.
After this is complete, in TWRP go to Reboot menu and select Bootloader, flash TWRP, do not reboot but use the bootloader menu to start TWRP. This time allow it to make changes to system. At the main menu if twrp go to Reboot - Recovery the device will restart and TWRP will load automatically, this step will lock in twrp so the stock OS doesn't replace it.
You only need to root stock rom, you don't need to root CM roms as they are already rooted (there are a few roms that are not pre-rooted but they are rare and none of the ones your talking about). As far as CM 13 vs 14.1 I can't really help you but from I've read both are stable enough for a daily driver device.
Click to expand...
Click to collapse
After typing 'fastboot flash recovery twrp.img' i switch to recovery and select it. But it shows recovery failed,bla bla in red colour. I tried 3 times but same result. What to do? now again when I go to the recovery,i see still it is the stock recovery.

[Need help]Rooting moto g4 plus in stock june security patch level.

I want to root my moto g4 plus(unlocked bootloader and twrp flashed). Anyone knows how to root moto g4 plus. And i also want to know that how to increase battery backup after rooting(is it a myth).
@ADITYA_KUMAR this has been asked and explained many times and once more.
- Take Backup
- get Elemental-X kernel (see development section and download correct one )
- flash with TWRP
- get latest SuperSU : SuperSU
- now you can follow same guide of MM from step 5 : Guide
Don't Forget to Take Backup..
____Mdd said:
@ADITYA_KUMAR this has been asked and explained many times and once more.
- Take Backup
- get Elemental-X kernel (see development section and download correct one )
- flash with TWRP
- get latest SuperSU : SuperSU
- now you can follow same guide of MM from step 5 : Guide
Don't Forget to Take Backup..
Click to expand...
Click to collapse
How to take backup and restore it. I flashed twrp image. Before rebooting twrp works fine. But after rebooting i am not able to open twrp. I think it got removed.
ADITYA_KUMAR said:
How to take backup and restore it. I flashed twrp image. Before rebooting twrp works fine. But after rebooting i am not able to open twrp. I think it got removed.
Click to expand...
Click to collapse
What happens if you select Recovery from Bootloader ? Is it booting in Stock Recovery ?
In TWRP go to Backup and make backup of /system /data /boot.
If anything bad happens while flashing/Rooting then you can restore it.
The first time, you must open TWRP from the bootloader directly or the recovery gets overwritten.
For rooting, you can flash Magisk instead of flashing SuperSu. Other steps remain exactly the same.
____Mdd said:
What happens if you select Recovery from Bootloader ? Is it booting in Stock Recovery ?
In TWRP go to Backup and make backup of /system /data /boot.
If anything bad happens while flashing/Rooting then you can restore it.
Click to expand...
Click to collapse
When i booted into recovery mode. It shows no command.
ADITYA_KUMAR said:
When i booted into recovery mode. It shows no command.
Click to expand...
Click to collapse
That's stock Recovery, you need to flash TWRP again.
____Mdd said:
That's stock Recovery, you need to flash TWRP again.
Click to expand...
Click to collapse
I flashed twrp 2 times. But every time i restarted my phone it removed automatically.
ADITYA_KUMAR said:
I flashed twrp 2 times. But every time i restarted my phone it removed automatically.
Click to expand...
Click to collapse
Did you flashed TWRP and with the next command booted immediately into twrp?
strongst said:
Did you flashed TWRP and with the next command booted immediately into twrp?
Click to expand...
Click to collapse
Commands used:
Fastboot flash recovery name.img
It gives output as image not signed or corrupt.
After that i typed command fastboot reboot bootloader.
I open recovery mode. It opens twrp. But after i restart my phone. It automatically removes the twrp.
ADITYA_KUMAR said:
Commands used:
Fastboot flash recovery name.img
It gives output as image not signed or corrupt.
After that i typed command fastboot reboot bootloader.
I open recovery mode. It opens twrp. But after i restart my phone. It automatically removes the twrp.
Click to expand...
Click to collapse
This is your problem. You must open recovery from the bootloader menu the very first time. Or TWRP is overwritten with stock recovery. I don't know why that is. But that is how it is...
baunthiyal said:
This is your problem. You must open recovery from the bootloader menu the very first time. Or TWRP is overwritten with stock recovery. I don't know why that is. But that is how it is...
Click to expand...
Click to collapse
It means that i don't have to run the fasboot reboot bootloader command and after finishing the flashing i have to open the recovery mode directly?
Yes
ADITYA_KUMAR said:
It means that i don't have to run the fasboot reboot bootloader command and after finishing the flashing i have to open the recovery mode directly?
Click to expand...
Click to collapse
Reboot into bootloader.
Flash recovery - fastboot flash recovery twrp-xxx.img
Open recovery from bootloader menu (by using the volume and power buttons)
From there you can reboot and your recovery will work normally after this, most probably.
baunthiyal said:
Reboot into bootloader.
Flash recovery - fastboot flash recovery twrp-xxx.img
Open recovery from bootloader menu (by using the volume and power buttons)
From there you can reboot and your recovery will work normally after this, most probably.
Click to expand...
Click to collapse
I need to root my stock nougat( june version).What should i do after that.
I'll tell you what I did.
1. Flash Elemental Ex kernel. https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836
2. Flash Magisk. https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
baunthiyal said:
Reboot into bootloader.
Flash recovery - fastboot flash recovery twrp-xxx.img
Open recovery from bootloader menu (by using the volume and power buttons)
From there you can reboot and your recovery will work normally after this, most probably.
Click to expand...
Click to collapse
It didn't work. I flashed twrp. I opened recovery mode by using volume down to scroll to recovery mode and power button to select it. I booted in twrp mode and rebooted system from there. After that i power off my phone and tried to open twrp again, but it is showing no commands only. I didn't boot into twrp again.
ADITYA_KUMAR said:
It didn't work. I flashed twrp. I opened recovery mode by using volume down to scroll to recovery mode and power button to select it. I booted in twrp mode and rebooted system from there. After that i power off my phone and tried to open twrp again, but it is showing no commands only. I didn't boot into twrp again.
Click to expand...
Click to collapse
Try commands,
fastboot oem fb_mode_set
fastboot flash recovery name.img
Fastboot oem fb_mode_clear
Then directly boot into recovery,
Then again boot into recovery through twrp itself (there is option for it in reboot) or try anything.
Thank you guys i successfully rooted my moto g4 plus(xt1643)

Stuck on "Fastboot Mode" screen

I stupidly tried using franco's app to flash cleanKernel on my rooted phone on 9.0.11, it failed of course and now can't boot my phone. I'm able to fastboot boot twrp.img but I'm not sure what is needed next. I've downloaded the full 9.0.11 ota file thinking something in it (or all of it) needs to be flashed from twrp. Afraid to do anything at this point for fear of losing data. Any tips are appreciated.
I've downloaded mauronofrio's rom-stock-fastboot utility but see he says it will clear data. I'm assuming all the .bat files will do this. Any way to avoid clearing internal storage?
soundneedle said:
From bootloader screen, using fastboot boot twrp.zip results in OP going to "Fastboot Mode" screen...and staying there. The zip is pushed to the phone but won't boot into TWRP. This started after I stupidly tried using franco's app to flash cleanKernel on my rooted phone. It failed of course and now can't boot my phone. My phone recently updated itself to 9.0.11, fyi.
Any ideas on how to fix this boot issue? Is it just a matter of flashing something from the full ota 9.0.11 file---some img file or something?
Click to expand...
Click to collapse
Wouldn't you want to be using a twrp.img not .zip?
fastboot boot twrp.img
Boot twrp from the img and then flash the zip once twrp boots?
I was able to recover...thank god. Just used mauronofrio's flash utility. Removed the "-w" flag from the flash-all.bat file and all is good.
Stuck on Fastboot Mode screen once I run fastboot boot twrp.img
bp328i said:
Wouldn't you want to be using a twrp.img not .zip?
fastboot boot twrp.img
Boot twrp from the img and then flash the zip once twrp boots?
Click to expand...
Click to collapse
Hi, I have just got a OnePlus 6T and I am getting this same error even though I am using the twrp.img - when I run fastboot boot 'twrp.img' it sticks on the Fastboot Mode screen.
I have the .zip on the phone's internal storage along with Magisk ready to install but I can't get there.
I did manage to get into Recovery once in the last 3 hours but under Advanced the only 2 options I have are to reboot to fastloader of reboot to recovery which just takes me round in circles!
Have tried everything I can find/think of right now and am no further down the line
Any help guidance will be greatly recieved as nothing I can find on the threads here seem to help
Thanks
s
Is the twrp.img even being flashed
SimmoMaz said:
Hi, I have just got a OnePlus 6T and I am getting this same error even though I am using the twrp.img - when I run fastboot boot 'twrp.img' it sticks on the Fastboot Mode screen.
I have the .zip on the phone's internal storage along with Magisk ready to install but I can't get there.
I did manage to get into Recovery once in the last 3 hours but under Advanced the only 2 options I have are to reboot to fastloader of reboot to recovery which just takes me round in circles!
Have tried everything I can find/think of right now and am no further down the line
Any help guidance will be greatly recieved as nothing I can find on the threads here seem to help
Thanks
s
Click to expand...
Click to collapse
When I think about it, it seems that the twrp.img I am flashing is not taking. When I go into recovery I get to choose 1 of 3 languages, I choose English and then I just get the 2 options as above - thing is, the font, layout etc. make it look like stock recovery and nothing like TWRP I have used before, no TWRP logo etc. Nothing
SimmoMaz said:
When I think about it, it seems that the twrp.img I am flashing is not taking. When I go into recovery I get to choose 1 of 3 languages, I choose English and then I just get the 2 options as above - thing is, the font, layout etc. make it look like stock recovery and nothing like TWRP I have used before, no TWRP logo etc. Nothing
Click to expand...
Click to collapse
Ok.. can you get into TWRP? Is so reflash the stock rom.. the once it has flashed do not reboot, go back to install and flash the lastest twrp .zip do not reboot, go back to install and flash/install magisk, once it installs then reboot to system... It will take a bit... Once it reboots check your Magisk manager you may need to reinstall it, reboot to TWRP and reflash it.. reboot to system band you should be good to go...
TWRP isn't there
lilbrat said:
Ok.. can you get into TWRP? Is so reflash the stock rom.. the once it has flashed do not reboot, go back to install and flash the lastest twrp .zip do not reboot, go back to install and flash/install magisk, once it installs then reboot to system... It will take a bit... Once it reboots check your Magisk manager you may need to reinstall it, reboot to TWRP and reflash it.. reboot to system band you should be good to go...
Click to expand...
Click to collapse
Thanks and apologies if a two posts appear from me, I submitted one about 20 minutes ago and it isn't showing.
The issue is more than that, even when I try to flash the TWRP image it doesn't seem to take. The phone gets stuck on the 'Fastboot Mode' OnePlus flash screen and hangs there.
I have to hold the power and vol+ keys to get the device to restart and I then receive a message saying 'bootloader unlocked, data insecure etc.' and to press the power to stop the boot process. If I leave it the phone boots into OOS10.3.3.
If I press the power button I can get to recovery mode (albeit there is a password screen there which I have never seen on other devices I've had). I put my password in and choose English. I am then given the two options; reboot to fastboot or reboot to recovery. There is no advanced option to allow me to install TWRP or Magisk zips, as a matter of fact I don't get any TWRP at all, it looks like stock recovery.
Is the phone defaulting to stock recovery and not the TWRP image? That is what, in my very non-expert opinion seems to be happening. Is that possible and if so, any ideas how to fix?
I have completely flashed the phone so it is on stock OOS (10.3.3.) so can start afresh. It is a refurbed 'like new' so could that have anything to do with it?
Thanks for reading the long post - am wondering if there are some other tools I need use to change how it boots?
S
SimmoMaz said:
Thanks and apologies if a two posts appear from me, I submitted one about 20 minutes ago and it isn't showing.
The issue is more than that, even when I try to flash the TWRP image it doesn't seem to take. The phone gets stuck on the 'Fastboot Mode' OnePlus flash screen and hangs there.
I have to hold the power and vol+ keys to get the device to restart and I then receive a message saying 'bootloader unlocked, data insecure etc.' and to press the power to stop the boot process. If I leave it the phone boots into OOS10.3.3.
If I press the power button I can get to recovery mode (albeit there is a password screen there which I have never seen on other devices I've had). I put my password in and choose English. I am then given the two options; reboot to fastboot or reboot to recovery. There is no advanced option to allow me to install TWRP or Magisk zips, as a matter of fact I don't get any TWRP at all, it looks like stock recovery.
Is the phone defaulting to stock recovery and not the TWRP image? That is what, in my very non-expert opinion seems to be happening. Is that possible and if so, any ideas how to fix?
I have completely flashed the phone so it is on stock OOS (10.3.3.) so can start afresh. It is a refurbed 'like new' so could that have anything to do with it?
Thanks for reading the long post - am wondering if there are some other tools I need use to change how it boots?
S
Click to expand...
Click to collapse
Ok.. are you using the latest TWRP? If you want in the guide section you can you the msmdow like ad tools to reset you phone to stock, and retry again..
THIS. I have the exact same issue. In short, I have the T-mobile version, and was able to unlock successfully. I am using twrp-3.2.3-0, and I have the img and zip in the same folder, same way Techibee does on Youtube. I then type "fastboot boot twrp-3.2.3-0-fajita.img", I get the "OKAY... OKAY... Booting... Finished" response in console. Then, the Fastboot screen appears and never leaves. I have done this 3 times now. I kept tweaking the process, but I'm nervous to keep debugging.
Stuck (
Hello guys,
I wanted to overclock my 6t global. so i had unlocked the bootloader then flashed the twrp. In twrp i firstly reset the os to factory setting and then i flash magisk and smurf kernel. but when i reboot after this my phone is stuck on the phone unlocked message.
ive tried flashing magisk only and then boot, it works. but when i flash smurf kernel i get stuck . why this happening plz help (

Categories

Resources