i tried to change the rom as i get bored easy. never had problems until now. I cant turn it on and every time i try to flash with sp flash tool it gives me errors. however the SAME rom i Always use to recover my bricked phone. Now however the computer will not even detect the preloader so i can install the usb drivers for that. however the mediatek driver usb is installed.
Please help as i think i have completely HARD-BRICKED my phone.
You tick the download button first.
Then Insert the usb port on the pc
If it detects thats good.
If it gives error, try again, hit download button and change the usb port.
This should work, I guess
Related
PC&Odin not able to detect phone via USB after flashing custom ROM: tried dif pc too
Hi all,
I've recently flashed this awesome ROM: [GearCM][i9500][4.4.4] Optimized CyanogenMod 11 for Samsung Galaxy S4 [20140912] in my device. ROM works great, very stable, fast performance, however since install, I am not able to detect my phone via USB. Not even ODIN sees the device connected.
Was doing my research before posting, so I will let you know what I've tried which was recommended in other posts and google:
1. Re-installed Samsung USB Drivers: No Go
2. Used different USB Cables (using stock one that came w/ phone right now): No Go
3. Tried different USB Ports: No Go
4. Tried a different PC: No Go
5. Yes, I am testing with my screen unlocked
Anything else I can try? Maybe a setting in my Phone?
Thanks!
Odin should always see your phone in download mode. No rom will change that.
If Odin doesn't detect your phone in download mode then it's either a:
- Driver problem
- Cable/port problem
- Faulty usb port
By the way, the device charges normally when connected to my computer USB.
Lennyz1988 said:
Odin should always see your phone in download mode. No rom will change that.
If Odin doesn't detect your phone in download mode then it's either a:
- Driver problem
- Cable/port problem
- Faulty usb port
Click to expand...
Click to collapse
Good call. Odin is not detecting the phone in download mode-- so I guess we can eliminate problem in the device configuration.
I'm going to try again in another PC and different cables. Maybe my Cable went bad, sucks because it's pretty new? Going to copy Odin to a pen drive so I can try in friends computer. On other PCs I only tried connecting in Windows-- no download mode & odin.
Ok, so I was able to get working back.
I enabled developer options by going in about and clicking the build 7 times. Proceeded to go to Debugging options and selected Android Debugging marked. Reinstalled Drivers again, then it showed PC connected as Media Device on notifications. I clicked there and changed to Camera PTP and then back to MTP.
Now I'm able to see the Device again!
No idea why I was not able to see it in Odin while on download mode, however, I can see it now even when not download mode.
Thread can be closed, thanks!
Hi Everyone, In an attempt to fix my bricked device with all necessary flash files and drivers installed perfectly, my device is being detected under 'HUMAN INTERFACE DEVICE' as a 'USB INPUT DEVICE' in device manager, according to what i read, my device is suppose to display or be detected as "qulacom HS-USB qloader 9008" under com port. but that isn't happening, i repaired the drivers, re-installed them, formatted my pc and tried it on fresh windows installation. but still the problem is there. i even tried it on several computers but it still detects as USB INPUT DEVICE under Human Interface Devices in device manager. Now i am stuck here with my device dead for the past two weeks. please any one with an idea how to fix this issue?
i will be deeply grateful. Thanks!!
:crying:
Steps Parku said:
Hi Everyone, In an attempt to fix my bricked device with all necessary flash files and drivers installed perfectly, my device is being detected under 'HUMAN INTERFACE DEVICE' as a 'USB INPUT DEVICE' in device manager, according to what i read, my device is suppose to display or be detected as "qulacom HS-USB qloader 9008" under com port. but that isn't happening, i repaired the drivers, re-installed them, formatted my pc and tried it on fresh windows installation. but still the problem is there. i even tried it on several computers but it still detects as USB INPUT DEVICE under Human Interface Devices in device manager. Now i am stuck here with my device dead for the past two weeks. please any one with an idea how to fix this issue?
i will be deeply grateful. Thanks!!
:crying:
Click to expand...
Click to collapse
follow this
1. join in recovery mode (cwm)
2. go mounts and stroge and format system
3 reboot ur device ( Now the loop is eliminated, just a static imagen )
3. dowload drives, firmware , and QNCG
4. install drivers or repair it
5 when the step 4 is done, plug ur device on elife logo and wait for driver installation(like 10 min)
6 use winrar for descompress the firmware
7open GNQC select bp browser, and search in folder firmware a file called BP_imagen
8 try with genereal mode or emergency mode, and click dowload
i did it, its working
u must have patience dont worry
try it, its working
good luck
Still Not Helpful.
andresplata94 said:
follow this
1. join in recovery mode (cwm)
2. go mounts and stroge and format system
3 reboot ur device ( Now the loop is eliminated, just a static imagen )
3. dowload drives, firmware , and QNCG
4. install drivers or repair it
5 when the step 4 is done, plug ur device on elife logo and wait for driver installation(like 10 min)
6 use winrar for descompress the firmware
7open GNQC select bp browser, and search in folder firmware a file called BP_imagen
8 try with genereal mode or emergency mode, and click dowload
i did it, its working
u must have patience dont worry
try it, its working
good luck
Click to expand...
Click to collapse
Actually my device doesn't even come on for me to do all that you said, i tried repairing drivers and all that but it still detects as USB INPUT DEVICE under HUMAN INTERFACE DEVICES. i need my device to detect as qualcomm device before GNQC downloader can detect it. my issue is very different here. because GNQC can't see my device since my device is not being detected the rightful way after all. i will deeply appreciate the solution. Thanks
did u fix it??
U can fix ? I have the same problem since three weeks and nothing... this a a sh*t... only recognized by HID... In other ocassion before of this, i can flash my Gionee but now i cant:crying:
Another one here who saw how the phone bricked after being flashed with GnQc, now when I plug the Usb on the Pc or with wall charger, the red light keep lit and it seems like it will like this forever. I am thinking of trying to get out the screen and disconnect the battery, seems like the phone is stuck on some strange mode.
Thanks.
This feel that not have solution....
Can any one fix it ?
i also got stuck . have given to gionee care they are unable to figure what was the actuall problem
Steps Parku said:
Actually my device doesn't even come on for me to do all that you said, i tried repairing drivers and all that but it still detects as USB INPUT DEVICE under HUMAN INTERFACE DEVICES. i need my device to detect as qualcomm device before GNQC downloader can detect it. my issue is very different here. because GNQC can't see my device since my device is not being detected the rightful way after all. i will deeply appreciate the solution. Thanks
Click to expand...
Click to collapse
the problem for me is that it have recovery stock english(e3) and i can't do anything...
anyone fixed the problem? i have my gionee bricked....
My Note 4 is n910cq with Exynos and I downloaded Android 6 from an xda thread and while I try to flash it through odin I got an error. After that the phone stuck with a screen says"firmware upgrade encountered an issue please select recovery mode ın kies and try again". I can put the phone into download mode but not able to get it to recovery mode. I tried to flash older roms but still keep getting error in odin. I tried Samsung smart switch app through upgrade section but no result. So, what to do?
it happens to me also because the phone disconnects while flashing , so you need to change the usb port ..keep trying to place it in a different usb port or even try to change the usb cable
tareqjordan said:
it happens to me also because the phone disconnects while flashing , so you need to change the usb port ..keep trying to place it in a different usb port or even try to change the usb cable
Click to expand...
Click to collapse
Thanks a lot. I changed the cable and PC and works good.
So here is the sad story , was just receiving the message in viber and the phone suddenly died, tried many methods
Tried to load into recovery
Tried MSMdownloadtool
when i hold volume +and - button and power button and plug it into the PC the MSMdownload tool recognize the device and when i follow the procedure it gives message like Firehose data read error.
That's "easy" to fix, first use the original USB cable (I don't know why, but on my device the flash always fails when I use a non-original cable), try with another USB port of your pc, or try with some other Qualcomm driver.
onliner said:
That's "easy" to fix, first use the original USB cable (I don't know why, but on my device the flash always fails when I use a non-original cable), try with another USB port of your pc, or try with some other Qualcomm driver.
Click to expand...
Click to collapse
yup, Tried original USB, different port and different laptop still stuck on those error
same problem tried multiple times no luck
Hi,
I tried flashing the new v11 firmware via Odin. Unfortunately, i didnt work (i come from v10). Now i get that error message , that i´d have to use Smart Switch soft on PC to do an emergency recovery. Unfortunately it seems to find it (some usb plug in sounds appears in windows) but the device can´t be found. Whats the take here ?
The USB drivers seem to be installed fine. Thanks in advantage!