Galaxy S6 G920F pit and branded firmwares
warning : pit can brick your dévice,so use it only if you need and with modération
please NO REDISTRIBUTION
do not copy in other forums (only XDA link)
pit files are signed so don't change the name and the download link
original pit for a G920F dévice open firmware:
ZEROFLTE_EUR_OPEN.pit :
partition--------------- ZEROFLTE.pit --- open firmware----- ILO firmware
p01: BOTA0 :--------------- 1 024
p02: BOTA1 : ---------------1 024
p03: efs.img :-------------- 5 120
p04: param.bin :-----------2 048
p05: boot.img :-------------7 168-------- 27 141ko
p06: recovery.img :-------8 704-------- 29 939ko
p07: OTA:------------------2 048
p08: modem.bin----------10 752-------- 39 065ko
p09: tombstones.img :----- 256
p10: dtn.ssw :--------------- 256
p11: PERSISTENT :------------192
p12: STEADY :----------------64
p13: persdata.img---------2 304
p14: SBFS :----------------3 840
p15: system.img :------ 947 200-------- 3 415 466ko
p16: cache.img :---------51 200---------- 27 645Ko--------- 40 869Ko
p17: hidden.img : -------- 2 560----------- 7 637Ko--------- 86 805Ko
p18: userdata.img :
by according @Hero, thread (thanks to him )
http://forum.xda-developers.com/galaxy-s6/development/dev-galaxy-s6-partition-table-t3081510
we must multiply by 4 , block count to converte in KB(b) .this new résult is lower than nine but don't change the partition (hidden and cache )
[email protected]:/ $ cat /proc/partitions
major minor #blocks name
8 0 31240192 sda
8 1 4096 sda1
8 2 4096 sda2
8 3 20480 sda3
8 4 8192 sda4
8 5 28672 sda5
8 6 34816 sda6
8 7 8192 sda7
8 8 43008 sda8
8 9 1024 sda9
8 10 1024 sda10
8 11 768 sda11
8 12 256 sda12
8 13 9216 sda13
8 14 15360 sda14
8 15 3788800 sda15
259 0 204800 sda16
259 1 66560 sda17
259 2 26992640 sda18
8 16 4096 sdb
8 32 4096 sdc
253 0 1048576 vnswap0
for SM-G920F
ZEROFLTE_EUR_OPEN.pit : hidden (2560) 10 240KB cache: (51200) 204 800KB
https://1fichier.com/?olsab05qni
https://drive.google.com/file/d/0BzyeAt2hy6XeZHQ4bUpvbUtCLVk/view?usp=sharing
for branded or some open firmwares we need a higher hidden partition
ZEROFLTE-HIDDEN50.pit: hidden 51 200KB cache: 204 800KB
https://1fichier.com/?q88fz08nvy
https://drive.google.com/file/d/0BzyeAt2hy6XeVFdkdEFzdTBZOE0/view?usp=sharing
ZEROFLTE-HIDDEN100.pit: hidden 102 400KB cache: 204 800KB
https://1fichier.com/?ts1f3nb3nr
this pit size have been test bymrij (thank to him) with OJK firmware
http://www.sammobile.com/forum/showthread.php?t=26998
ZEROFLTE-HIDDEN150m.pit hidden 153 600KB cache: 204 800KB
https://1fichier.com/?c7wwmuqzc6
https://drive.google.com/file/d/0BzyeAt2hy6XeUWlaaTJjek1kOEk/view?usp=sharing
" magic pit " is:
ZEROFLTE_EUR_OPEN-HIDDEN250.pit:
https://1fichier.com/?4f8y7tvinm
https://drive.google.com/file/d/0BzyeAt2hy6XeVS1oZmdEbXkxMVE/view?usp=sharing
SM-G920F TEF multi CSC (O2U VIA XEC ) pit file
ZEROFLTE_EUR_OPEN_HIDDEN300M
https://drive.google.com/file/d/0BzyeAt2hy6XeUElrOFo0Tm15cHc/view?usp=sharing
other SM-G920
SM-G920A ATT
ZEROFLTE_USA_ATT.pit
https://drive.google.com/file/d/0BzyeAt2hy6XebTRUZERQODVpUGs/view?usp=sharing
SM-G920AZ AIO
ZEROFLTE_USA_ATT.pit
https://drive.google.com/file/d/0BzyeAt2hy6XeSTY1VTJEbDY0NUU/view?usp=sharing
SM-G920F EVR
ZEROFLTE_EUR_OPEN_HIDDEN150M
https://drive.google.com/file/d/0BzyeAt2hy6XebWpHX0Vxb2phOWc/view?usp=sharing
SM-G920F TEF
ZEROFLTE_EUR_OPEN_HIDDEN300M
https://drive.google.com/file/d/0BzyeAt2hy6XeUElrOFo0Tm15cHc/view?usp=sharing
SM-G920F TIM
ZEROFLTE_EUR_OPEN_HIDDEN200M
https://drive.google.com/file/d/0BzyeAt2hy6XeT3ZCeDB0R0p0UWc/view?usp=sharing
SM-G920I ODD multi CSC ( BNG INS INU NPL SLK )
ZEROFLTE_AUS_XSA.pit
https://drive.google.com/file/d/0BzyeAt2hy6XeZHZBYUtXYlc1NXM/view?usp=sharing
SM-G920P SPR
ZEROFLTE_USA_SPR.pit
https://drive.google.com/file/d/0BzyeAt2hy6XeY3pDNXBhVUZodFk/view?usp=sharing
SM-G920R4 USC
ZEROFLTE_USA_USC.pit
https://drive.google.com/file/d/0BzyeAt2hy6XeeFVmSjc3RVgtOEE/view?usp=sharing
SM-G920T TMO
ZEROFLTE_USA_TMO.pit
https://drive.google.com/file/d/0BzyeAt2hy6XeRmRyd0Zqd0IyUVk/view?usp=sharing
SM-G920T1 TMO
ZEROFLTE_USA_TMO.pit
https://drive.google.com/file/d/0BzyeAt2hy6XeaTZqejZVUEVudWs/view?usp=sharing
SM-G920V pit:
ZEROFLTE_USA_VZW
https://drive.google.com/file/d/0BzyeAt2hy6XeQlJ0a1BRSWxzckE/view?usp=sharing
SM-G920W8 OYA multi CSC ( BMC BWA ESK FMC GLW KDO MTA RWC TLS VMC VTR )
ZEROFLTE_CAN_BMC.pit
https://drive.google.com/file/d/0BzyeAt2hy6XebncxRl9MTGw4eTg/view?usp=sharing
SM- G9200 CHC pit:
ZEROFLTE_CHN_OPEN (G9200).pit
https://drive.google.com/file/d/0BzyeAt2hy6XeRVZFZGZxaGZuc1U/view?usp=sharing
SM-G9200 TGY pit:
ZEROFLTE_CHN_HK.pit
https://drive.google.com/file/d/0BzyeAt2hy6XeZ3pVMHRJWG5IdHM/view?usp=sharing
SM-G9208 BRI
ZEROFLTE_CHN_TW.pit
https://drive.google.com/file/d/0BzyeAt2hy6Xed0dLR21ucWd1Vmc/view?usp=sharing
SM-G9208 CHC
ZEROFLTE_CHN_CMCC (G9208).pit
https://drive.google.com/file/d/0BzyeAt2hy6XeZFlDQUliaVRaUWs/view?usp=sharing
regards , and don't forget the thanks button , it's free .
galaxy S6 G920F hidden and cache size list for pit:
OXA OE3 : hidden.img:___7 637Ko cache:_27 645Ko__ZEROFLTE_EUR_OPEN.pit
AMO OD9 : hidden.img:___9 409Ko cache:_11 353Ko__hidden250 OK
ATO OE3 : hidden.img:__19 989Ko cache:_10 681Ko__hidden100 ok
AUT OE3 : hidden.img:__22 653Ko cache:_14 925Ko__hidden100 ok
BOG OD9 : hidden.img:__30 337Ko cache:_10 981Ko__hidden250 OK
COS OCV : hidden.img:_182 461Ko cache:_10 093Ko__hidden250 OK
CYO OE3 ; hidden.img:___7 553Ko cache:_35 901Ko__hidden250 OK
DBT OE3 : hidden.img:__31 533Ko cache:_10 817Ko__hidden100 ok
DPL OFD : hidden.img:_134 669Ko cache:_20 865Ko__hidden250 OK
DHR OFD : hidden.img:_155 037Ko cache:_11 841Ko__hidden240 original
DNL OCV : hidden.img:_113 201Ko cache:_11 685Ko__hidden250 OK
DRE OCV : hidden.img:__21 877Ko cache:_35 733Ko__hidden60 original
DTM OCV : hidden.img:_176 637Ko cache:_22 313Ko__hidden250 OK
EVR OCY : hidden.img:__27 309Ko cache:_20 565Ko__hidden250 ok
FTM OCV : hidden.img:__63 385Ko cache:_18 085Ko__hidden250 ok
GLB ODI : hidden.img:__71 765Ko cache:_68 197Ko__hidden100 ok
H3G OCV : hidden.img:__31 405Ko cache:_14 069Ko__hidden100 ok
HTS OCV : hidden.img:__40 321Ko cache:_19 473Ko__hidden60 original
HUI OCV : hidden.img:__39 689Ko cache:_13 221Ko__hidden100 ok
IDE OD9 : hidden.img:__52 969Ko cache:_16 061Ko__hidden250 original
ILO OD4 : hidden.img:__86 805Ko cache:_40 869Ko__hidden100 ok tanks to omrij
LUX OCV : hidden.img:___7 553Ko cache:_14 837Ko
MAX OCV : hidden.img:_142 713Ko cache:_23 693Ko__hidden240 original
MEO OCV : hidden.img:__26 021Ko cache:_15 077Ko__hidden50 original
MOT OE3 : hidden.img:__57 573Ko cache:_19 593Ko__hidden100 ok
NEE : hidden.img:__16 745Ko cache:_17 772Ko__hidden50 original
OJV OD4 : hidden.img:__93 750Ko cache:_50 121Ko__hidden150 ok
O2C OE3 : hidden.img:__23 845Ko cache:_14 877Ko__hidden100 ok
PAN OE3 : hidden.img:__71 105Ko cache:_10 603Ko__hidden100 original
PHE OE3 : hidden.img:__48 845Ko cache:_10 413Ko__hidden100 ok
PHN OE3 : hidden.img:__15 329Ko cache:_10 581Ko__hidden50 ok
SEK OD5 : hidden.img:__19 157Ko cache:_29 557Ko__hidden100 ok
SER ODE : hidden.img:__19 157Ko cache:_29 747Ko__hidden100 ok
SFR OCV : hidden.img:___7 753Ko cache:_16 681Ko__hidden100 ok
TEN OE3 : hidden.img:__38 197Ko cache:_16 905Ko__hidden100 ok
TIM OCV : hidden.img:_119 341Ko cache:_11 021Ko__hidden250 ok
TMT : hidden.img;_126 409Ko cache:_11 201Ko__hidden240 original
TMZ : hidden.img:__59 425Ko cache:_11 381Ko__hidden240 original
TPD OE3 : hidden.img:__15 329Ko cache:_10 581Ko__hidden100 ok
SWC OCZ : hidden.img:_148 726Ko cache:_56 977Ko__hidden250 ok
VDS OE3 : didden.img:__27 809Ko cache:_16 905Ko__hidden100 ok
VIA OCV : hidden.img:_197 885Ko cache:_50 153Ko__hidden300 ok
XEG OCV : hidden.img:__44 469Ko cache:_11 725Ko__hidden60 original
VVT OE3 : hidden.img:__11 245Ko cache;_10 473Ko__hidden100 ok
WIN OCV : hidden.img:__49 457Ko cache:_10 669Ko__hidden100 ok
3IE OCV : hidden.img:__20 929Ko cache;_11 721Ko__hidden100 ok
ZEROFLTE_EUR_OPEN.pit :___________hidden 10 240KB cache: 204 800KB
ZEROFLTE_EUR_OPEN-HIDDEN100.pit:__hidden 102 400KB cache: 204 800KB
ZEROFLTE_EUR_OPEN-HIDDEN150.pit:__hidden 153 600KB cache: 204 800KB
ZEROFLTE_EUR_OPEN-HIDDEN250.pit:__hidden 256 000KB cache: 204 800KB
ZEROFLTE_EUR_OPEN-HIDDEN300.pit:__hidden 307 200KB cache: 204 800KB
-CYO same firmware for BGL CYO ETL MET MSR ORX ROM SEB SEE SIO TEB TOP TPH TSR TWO XEH XEO
-DAX same firmware for MAX TRG TTR
-DHX same firmware for CRO DHR
-DNL same firmware for DNL TNL
-DPL same firmware for DPL TPL
-DTM same firmware for DTM DDE
-GLB same firmware for CAM GLB SMA THL XID XME XSE XTC XTE XXV
-ILO same firmware for CEL ILO PCL PTR
-OJV same firmware for ACR AFG AFR BTC ECT EGY FWD KEN KSA LEB LYS MAT MID MRU MTZ MWD PAK THR TMC TRC TUN TUR WTL XFA XFE XFM XFN XFU XSG
-OXA same firmware for BTU CPW DBT ITV KOR NEE XEF XEO
-SER same firmware for CAC CAU SEK SER SKZ
-SWC same firmware for ATL AVF CNX CYV MOB MTL OMN MTL OMN SIM SWC TCL VD2 VDC VDF VDH VDI VGR VIP VOD
-VIA same firmware for O2U VIA XEC
regards
S6 G920F ODIN V3.10.6
don't forget to save all your data
with a stock or branded firmware , flash the one file ( md5 ) firmware in AP case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
with a 4 files firmware:
the répartition is automatic with the pit file (in the CSC ) so you will loose all your data
you can flash the pit file alone :
select pit case (1)
ok(2)
click pit case (3) choose your pit file
click start (4)
you also will loose all your data
downgrading firmware ( only from 5.0.2 to 5.0.2 and never from 5.1 to 5.0.2 )
you can downgrade but after the keyboard will not work .
1-power off the device ,
2- power on in recovery mode for wiping cache partition and data/factory reset
http://wgnszoz9s1.1fichier.com/
3- reboot your device
with the ZEROFLTE_EUR_OPEN-HIDDEN100.pit you will have this repartition:
if you want to see your partition like this image (with rooted or unrooted device)
install an explorer app ( https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree&hl=fr )
and open: proc/partitions (open as: text file / RB Text Editor )
regards
Im sorry but what is the benefit of this?
i own the sprint version g920p
by according @Hero, thread (thanks to him )
http://forum.xda-developers.com/galaxy-s6/development/dev-galaxy-s6-partition-table-t3081510
i've change post1
@ Ntress:
if your original dévice was sold with an open firmware you can't change and download a branded firmware without changing pit file
(ODIN failed at hidden.img )
http://www.sammobile.com/forum/showthread.php?t=27055&p=118525#post118525
for G920P don't use these pit files they are only for G920F and maybe you need another table partition
exemple with G920V
partition name : ZEROFLTE_USA_VZW.pit
p01: BOTA0 :--------------- 1 024
p02: BOTA1 : ---------------1 024
p03: efs.img :-------------- 5 120
p04: m9kefs1.bin :---------1*024
p05: m9kefs2.bin :---------1*024
p06: m9kefs3.bin :---------1*024
p07: param.bin:------------2 048
p08: boot.bin--------------7*168
p09 :recovery.img---------8*704
p10: OTA-------------------2*048
p11: modem.bin-----------19*456
p12: tombstones.img :----- 256
p13: dtn.ssw :--------------- 256
p14: PERSISTENT :------------192
p15: STEADY :----------------64
p16: persdata.img---------2 304
p17: SBFS :----------------3 840
p18: system.img :------ 1*121*280
p19: cache.img :---------262*144
p20: carrier.img : -------- 3*840
p21: userdata.img :
regards
@ Ntress:
for G920P ZEROFLTE_USA_SPR.pit https://1fichier.com/?ns0zyi2rdi
partition name : ZEROFLTE_USA_SPR.pit
p01: BOTA0 :--------------- 1 024
p02: BOTA1 : ---------------1 024
p03: efs.img :-------------- 5 120
p04: m9kefs1.bin :---------1 024
p05: m9kefs2.bin :---------1 024
p06: m9kefs3.bin :---------1 024
p07: param.bin:------------2 048
p08: boot.bin--------------7 168
p09: recovery.img---------8 704
p10: OTA-------------------2 048
p11: modem.bin-----------19 456
p12: tombstones.img :----- 256
p13: dtn.ssw :--------------- 256
p14: PERSISTENT :------------192
p15: STEADY :----------------64
p16: persdata.img---------2 304
p17: SBFS :----------------3 840
p18: system.img :------ 957 440
p19: cache.img :---------76 800
p20: carrier.img : -------- 11 520
p21: userdata.img :
HIDDEN partition only contains the carrier bloatware anyway so none of it's contents is needed at all if you don't want the crappy preloaded stuff.
Downloads not work!
@jonchliu
branded firmwares : you can find carrier app and games in hidden partition
@dajumper
after control ,downloads are working :
regards
Re-Partition operation failed
Failed tried to partition with ZEROFLTE_EUR_OPEN-sb.pit to prepare for EVR ROM
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
@inkstripe
have you try with ODIN V3.10.6
in first flash only pit file and do not tick auto reboot
and after flash full firmware and pit file with auto reboot select
regards
Yes, I'm trying pit file on it's own and with 3.10.6
yakapa40 said:
@inkstripe
have you try with ODIN V3.10.6
in first flash only pit file and do not tick auto reboot
and after flash full firmware and pit file with auto reboot select
regards
Click to expand...
Click to collapse
Hi.
My rom is : OJV OD4 : hidden.img:__93 750Ko cache:_50 121Ko
Could you help me which pit file should i download?
I really need this. @yakapa40
@inkstripe
Pit file worked fine, however the G920FXXU1AOCY_G920FEVR1AOC1_G920FXXU1AOCW_HOME.tar .md5 didn't succeed with hidden.img fail
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so i don't understand why hidden failed
@amirkard
My rom is : OJV OD4 : hidden.img:__93 750Ko cache:_50 121Ko
you can try with:
ZEROFLTE_EUR_OPEN-sb225.pit:______hidden 204 800KB cache: 82 400KB
regards
yakapa40 said:
@inkstripe
Pit file worked fine, however the G920FXXU1AOCY_G920FEVR1AOC1_G920FXXU1AOCW_HOME.tar .md5 didn't succeed with hidden.img fail
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so i don't understand why hidden failed
Click to expand...
Click to collapse
How can I confirm if the pit file worked?
@inkstripe
http://forum.xda-developers.com/galaxy-s6/help/firmware-pit-file-t3116540
and
http://www.sammobile.com/forum/showthread.php?t=26998&p=118348#post118348
regards
@yakapa40
Pit didn't work for me
Odin 3.10.6 failed at pit
amirkard said:
@yakapa40
Pit didn't work for me
Odin 3.10.6 failed at pit
Click to expand...
Click to collapse
hello
please if you want help i need more infos:
which firmware do you try to download ?
whitch pit file ?
where have you put the pit file in ODIN ?
i think with ODIN 3.10.6 and G920 you need to flash the pit file with the 4 files firmware (pit file in the CSC)
regards
Still no joy with EVR hidden.img
Hi,
I'm struggling to put EVR ROM failing at hidden.img. Have tried all the pit files in this thread but no luck. Some of the pit files actually fails in odin. I have tried putting pit inside CSC with no luck.
ZEROFLTE_EUR_OPEN-sb.pit file fails in ODIN
however
ZEROFLTE_EUR_OPEN_HIDDEN100M.pit does NOT fail in Odin. But either way I can't put EVR hidden.img.
I am now trying to find out why ZEROFLTE_EUR_OPEN-sb.pit fails in odin. I compared the two pit files and noticed a difference in block size
Entry Memory Address: 0xA6C
ZEROFLTE_EUR_OPEN-sb.pit
Block Size: 1,024,224
Block Count: 22,560
ZEROFLTE_EUR_OPEN_HIDDEN100M.pit
Block Size: 1,044,224
Block Count: 25,600
Does anyone know
1. Why ZEROFLTE_EUR_OPEN-sb.pit fails in Odin? Has anyone been able to use this file?
2. Block sizes are different between the two? I can understand block count should be different.
3. Why ZEROFLTE_EUR_OPEN_HIDDEN100M.pit says successful in Odin however it still fails with hidden.img (27k)
4. Anyway of checking partition layout on my S6? I don't have root unfortunately.
Any help appreciated
i've worked on G920F for helping omrij
the new pit size have been test by: omrij (thank to him)
http://www.sammobile.com/forum/showthread.php?t=26998
i've post this thread in first in development section and at this time i don't know why not working for all the G920F
i'm working on this problem to see what Samsung have changed with S6 device but if you only post don't work it's very hard for me to find a solution
i need more infos
regards
Related
Hello,
i want to get back from CM 12 with lp 5.1.1 to stock LP 5.0 . I delete everything (internal storage, system, ect...) in recovery mode an try to flash with odin but it fails!!!
Im using the right Firmware (because i flash every 2 months other firmwares/ROMs )
Can anyone help?
Thanks in advance. :good:
Kind regards
(Please be kind with my english... its not my first language)
PS: attached the Odin Log:
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try flashing the PIT file along with the stock ROM in ODIN
*Detection* said:
Try flashing the PIT file along with the stock ROM in ODIN
Click to expand...
Click to collapse
Where can i find it? Im very afraid of pit files
lladwein said:
Where can i find it? Im very afraid of pit files
Click to expand...
Click to collapse
afraid or not, you need them :thumbup:
lladwein said:
Where can i find it? Im very afraid of pit files
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SM-G900M_pit_16GB.zip (1.1 KB, 1468 views)
SM-G900F_pit_16GB.zip (1.1 KB, 12465 views)
SM-G900T_pit_16GB.zip (1.1 KB, 913 views)
SM-G900H_pit_16GB.zip (1.0 KB, 2803 views)
SM-G900P_pit_16GB.zip (1.2 KB, 490 views)
SM-G900W8_pit_16GB.zip (1.1 KB, 647 views)
SM-G900A_pit_16GB.zip (1.2 KB, 1719 views)
SM-G900I_pit_16GB.zip (1.1 KB, 645 views)
SM-G900F_pit_16GB_SER.zip (1.1 KB, 5877 views)
SM-G900F_pit_16GB_ETL.zip (1.2 KB, 963 views)
SM-G900F_pit_16GB_OLB_ASIA.zip (1.2 KB, 807 views)
SM-G900F_pit_16GB_TGY.zip (877 Bytes, 847 views)
SM-G870A_pit_16GB_S5 Active.zip (1.1 KB, 331 views)
SM-G900R7_pit_16GB.zip (1.2 KB, 224 views)
SM-G900F_pit_16GB_TPH_Portugal.zip (1.2 KB, 553 views)
SM-G900FD_pit_16GB_SER.zip (1.1 KB, 326 views)
G901F_pit_G901FBOG1ANJ1_BOG.zip (1.2 KB, 136 views)
G901F_pit_G901FFTM1ANH2_FTM.zip (1.2 KB, 122 views)
G901F_pit_G901FORL1ANH1_ORL.zip (1.2 KB, 108 views)
G901F_pit_G901FVFG1ANI1_VD2.zip (1.2 KB, 154 views)
hi gays this is first time for me in this big forum
my phone S5 G900A AT&T Rom 5.1.1 With no root and can't downgrade or add custom recovery
i need unpack to change my phone language and delete AT&T Programs in lollipop ROM 5.1.1 stock ROM
i am using ubuntu 16.04 LTS
i'm doing this steps.. if you could clarify the wrongs pleas .. thanks
first : i have stock ROM 4 files AP - BL - CP - CSC_ATT
G900AUCU4COI5_CL5869384_QB6398515_REV00_user_low_ship_MULTI_CERT
i need to extract AP_G900AUCU4COI5_CL5869384_QB6398515_REV00_user_low_ship_MULTI_CERT.tar.md5
and edit system.img.ext4
by right click on file system.img.ext4 and open with ARK and extract it
now i have those files boot.img - persist.img.ext4 - recovery.img - system.img.ext4
i download the img-tools to change ext4 to img
i take a system.img.ext4 file and but it in img-tools folder in my home and do this commands
right click and chose Open in Terminal in img-tools folder
sudo su
enter password
simg2img system.img.ext4 system.img
makdir system
mount -t ext4 -o loop system.img system/
Click to expand...
Click to collapse
now i have mounted system.. i well delet all APK files in system/APP folder
and replace it from S5 G900H ROM 5.1.1 with national language
and change system/framework/framework-res.apk and system/framework/twframework-res.apk from the same ROM
when finished i need to repack files with this command
tune2fs -l system.img | grep "Block size"
Block size: 4096
tune2fs -l system.img | grep "Block count"
Block count: 656384
ech $((4096 * 656384))
2688548864
make_ext4fs -s -l 2688548864 -a system system.img.ext4 system
Click to expand...
Click to collapse
now i have my edited sysytem.img.ext4
i need to but it back in the same folder with other 3 files to make tar.md5 file to flash it
this commandes well do it
tar -H ustar -c boot.img persist.img.ext4 recovery.img system.img.ext4 > my_final_packeg.tar
md5sum -t my_final_packeg.tar >> my_final_packeg.tar
mv my_final_packeg.tar my_final_packeg.tar.md5
Click to expand...
Click to collapse
finally i have the last file to flash it ((my_final_packeg.tar.md5))
the problem is when i flash it by odin3 v3.11 i have this massage
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> persist.img.ext4
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL (auth)!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
i need your help and Sorry about my bad language
hi gays this is first time for me in this big forum
my phone S5 G900A AT&T Rom 5.1.1 With no root and can't downgrade or add custom recovery
i need unpack to change my phone language and delete AT&T Programs in lollipop ROM 5.1.1 stock ROM
i am using ubuntu 16.04 LTS
i'm doing this steps.. if you could clarify the wrongs pleas .. thanks
first : i have stock ROM 4 files AP - BL - CP - CSC_ATT
G900AUCU4COI5_CL5869384_QB6398515_REV00_user_low_s hip_MULTI_CERT
i need to extract AP_G900AUCU4COI5_CL5869384_QB6398515_REV00_user_lo w_ship_MULTI_CERT.tar.md5
and edit system.img.ext4
by right click on file system.img.ext4 and open with ARK and extract it
now i have those files boot.img - persist.img.ext4 - recovery.img - system.img.ext4
i download the img-tools to change ext4 to img
i take a system.img.ext4 file and but it in img-tools folder in my home and do this commands
right click and chose Open in Terminal in img-tools folder
Quote:
sudo su
enter password
simg2img system.img.ext4 system.img
makdir system
mount -t ext4 -o loop system.img system/
now i have mounted system.. i well delet all APK files in system/APP folder
and replace it from S5 G900H ROM 5.1.1 with national language
and change system/framework/framework-res.apk and system/framework/twframework-res.apk from the same ROM
when finished i need to repack files with this command
Quote:
tune2fs -l system.img | grep "Block size"
Block size: 4096
tune2fs -l system.img | grep "Block count"
Block count: 656384
ech $((4096 * 656384))
2688548864
make_ext4fs -s -l 2688548864 -a system system.img.ext4 system
now i have my edited sysytem.img.ext4
i need to but it back in the same folder with other 3 files to make tar.md5 file to flash it
this commandes well do it
Quote:
tar -H ustar -c boot.img persist.img.ext4 recovery.img system.img.ext4 > my_final_packeg.tar
md5sum -t my_final_packeg.tar >> my_final_packeg.tar
mv my_final_packeg.tar my_final_packeg.tar.md5
finally i have the last file to flash it ((my_final_packeg.tar.md5))
the problem is when i flash it by odin3 v3.11 i have this massage
Quote:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> persist.img.ext4
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL (auth)!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
i need your help and Sorry about my bad language
waitng Long------------------
silverjawal53 said:
hi gays this is first time for me in this big forum
my phone S5 G900A AT&T Rom 5.1.1 With no root and can't downgrade or add custom recovery
i need unpack to change my phone language and delete AT&T Programs in lollipop ROM 5.1.1 stock ROM
i am using ubuntu 16.04 LTS
i'm doing this steps.. if you could clarify the wrongs pleas .. thanks
first : i have stock ROM 4 files AP - BL - CP - CSC_ATT
G900AUCU4COI5_CL5869384_QB6398515_REV00_user_low_s hip_MULTI_CERT
i need to extract AP_G900AUCU4COI5_CL5869384_QB6398515_REV00_user_lo w_ship_MULTI_CERT.tar.md5
and edit system.img.ext4
by right click on file system.img.ext4 and open with ARK and extract it
now i have those files boot.img - persist.img.ext4 - recovery.img - system.img.ext4
i download the img-tools to change ext4 to img
i take a system.img.ext4 file and but it in img-tools folder in my home and do this commands
right click and chose Open in Terminal in img-tools folder
Quote:
sudo su
enter password
simg2img system.img.ext4 system.img
makdir system
mount -t ext4 -o loop system.img system/
now i have mounted system.. i well delet all APK files in system/APP folder
and replace it from S5 G900H ROM 5.1.1 with national language
and change system/framework/framework-res.apk and system/framework/twframework-res.apk from the same ROM
when finished i need to repack files with this command
Quote:
tune2fs -l system.img | grep "Block size"
Block size: 4096
tune2fs -l system.img | grep "Block count"
Block count: 656384
ech $((4096 * 656384))
2688548864
make_ext4fs -s -l 2688548864 -a system system.img.ext4 system
now i have my edited sysytem.img.ext4
i need to but it back in the same folder with other 3 files to make tar.md5 file to flash it
this commandes well do it
Quote:
tar -H ustar -c boot.img persist.img.ext4 recovery.img system.img.ext4 > my_final_packeg.tar
md5sum -t my_final_packeg.tar >> my_final_packeg.tar
mv my_final_packeg.tar my_final_packeg.tar.md5
finally i have the last file to flash it ((my_final_packeg.tar.md5))
the problem is when i flash it by odin3 v3.11 i have this massage
Quote:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> persist.img.ext4
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL (auth)!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
i need your help and Sorry about my bad language
Click to expand...
Click to collapse
Long waitng Plz Reply
How to backup stockRom S5 before starting to follow any instructions to root + flash + LineageOS ...
What I want:
* backup my brand new stock ROM Galaxy S5 SM-G900F
* before I even start with TWRP, root, etc.
* with an apk, via USB on a PC ... any way that would work
* or if total backup does not exist, then at least the EFS partitions?
because:
* I might want to sell it later
* I might have to send it back
* flashing TWRP & LineageOS might fail
* I have lost mobileInternet on an LG-V20 already because something went strange when flashing
* I am careful
Is there any way to backup a Samsung S5 before I even start with following any instructions here?
Am I asking for something impossible?
Was I on the right way already (see below), but have done something wrong?
Is it perhaps only possible after rooting? If so, then which tool do you recommend then?
Thanks a lot!
What I have tried:
* xda developer galaxy-s5/general every thread title until page 5 https://forum.xda-developers.com/galaxy-s5/general/page5
* xda developer search for "S5 backup", "S5 EFS", and a few other searches. Sorry for being dumb, please help me search, thanks.
* Heimdall PIT, but "ERROR: Failed to send request to end PIT file transfer!"
* Odin PIT, but "Can't open the specified file. (Line: 1892)"
* Samsung Tool 5.0 com.sec.ricky310711.samsungtool.apk https://forum.xda-developers.com/showthread.php?t=2696153 but the app-->Backup-EFS hangs at "Please Wait..." <-- probably because I could not install busybox because no root yet.
* manual EFS backup with dd https://forum.xda-developers.com/showthread.php?t=2737448 but I get a "su: not found", obviously, because unrooted
Code:
Heimdall v1.4.0
...
Initialising connection...
Detecting device...
Claiming interface...
Setting up interface...
Initialising protocol...
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
ERROR: Failed to send request to end PIT file transfer!
ERROR: Failed to download PIT file!
Ending session...
ERROR: Failed to send end session packet!
Releasing device interface...
Code:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 0 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone?
ankade said:
Anyone?
Click to expand...
Click to collapse
Though, I don't have your specific variant, the typical "just in case" files (that I personally always begin with) to obtain are the following:
1) Stock Firmware File (I just go with the latest and sometimes the 1 previously released).
2) Latest Odin PC Software.
3) Latest Samsung USB Drivers for the PC.
4) PIT file (PIT = Partition Information Table).
Those are usually the bare essentials that I begin with.
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Enigma Machine {aenigma = Latin for "Riddle"}.
Great, thanks a lot. That is a helpful list.
Ibuprophen said:
2) Latest Odin PC Software.
Click to expand...
Click to collapse
Which is the latest you are using? The version "Odin3-v3.13.1" does NOT work, see above.
How exactly do I extract the current state of my (still unrooted) SM-G900F ?
Thanks.
I have now tried again manually:
Code:
heimdall download-pit --output s5.pit
Is that the right command?
It only worked after overwriting the MSM8960 driver with zadig.exe
Then it looks like this:
Code:
Heimdall v1.4.0
Copyright (c) 2010-2013, Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/
This software is provided free of charge. Copying and redistribution is
encouraged.
If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/
Initialising connection...
Detecting device...
Claiming interface...
Setting up interface...
Initialising protocol...
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
then after a while:
Code:
ERROR: Failed to send request to end PIT file transfer!
ERROR: Failed to download PIT file!
Ending session...
ERROR: Failed to send end session packet!
Releasing device interface...
heimdall 1.4.2
Hooray, big progress. It was a version problem, older versions of heimdall seem faulty. And grrrmpf: the "heimdall" website which comes up at the top on search engines ... provides an outdated 1.4.0 version. Which seems broken. But hooray, the 1.4.2 version of heimdall works:
this looks good, no?
Code:
cd heimdall_1.4.2_win64
heimdall print-pit --no-reboot
Code:
Heimdall v1.4.2
Copyright (c) 2010-2017 Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/
This software is provided free of charge. Copying and redistribution is encouraged.
If you appreciate this software and you would like to support future development please consider donating: http://www.glassechidna.com.au/donate/
Initialising connection...
Detecting device...
Claiming interface...
Setting up interface...
Initialising protocol...
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
PIT file download successful.
Code:
Entry Count: 30
Unknown 1: 1598902083
Unknown 2: 844251476
Unknown 3: 21325
Unknown 4: 14413
Unknown 5: 14137
Unknown 6: 52
Unknown 7: 0
Unknown 8: 0
now there are 30 such entries:
Code:
--- Entry #0 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 1
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 8192
Partition Block Count: 30720
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: APNHLOS
Flash Filename: NON-HLOS.bin
FOTA Filename:
I got the new heimdall 1.4.2 version from here:
https://github.com/Benjamin-Dobell/Heimdall/issues/295#issuecomment-364729538
and because he only provides the source, the binary from here
https://github.com/tothphu/heimdall_build/
this worked too:
Code:
heimdall download-pit --no-reboot --output S5-download-pit.pit
It resulted in a non-human-readable binary file of 8192 bytes.
But:
How to backup partitions?
with
Code:
heimdall --help
I can see that there I can flash ONTO the device with e.g.
Code:
heimdall flash --RECOVERY twrp-x.x.x-x-klte.img --no-reboot
but there does not seem to be a
Code:
heimdall read --RECOVERY --file recovery.img --no-reboot
?
how to READ a partition FROM the device?
?
Now I have tried it via USB debugging, with "minimal_adb_fastboot_1.4.3_portable.zip"
but
Code:
adb shell
ls -al /dev/block/platform/msm_sdcc.1/by-name/efs
lrwxrwxrwx root root 2014-05-24 16:36 efs -> /dev/block/mmcblk0p12
dd if=/dev/block/mmcblk0p12 of=/storage/3164-3234/S5/efs.img
results in
Code:
dd: /dev/block/mmcblk0p12: Permission denied
and
Code:
su -
/system/bin/sh: su: not found
so it looks as if my first hope has to be declared dead ...
No system backup without root, right?
?
But what I don't understand ... How did people extract these here then: https://www.sammobile.com/firmwares/galaxy-s5/SM-G900F/ ???
I have found instructions how to get back to stock rom, but I would like to use my own original stockROM for that. But I don't know how to back it up. Please help. Thanks.
how to root?
The phone is this one:
Samsung S5
SM-G900F
Android version 6.0.1
Android security patch level: 1 January 2017
I have tried these root tools:
Kingroot (NewKingrootV5.3.7_C197_B451_xda_release_2018_06_19_20180620193529_242043.apk) --> "Generating adaptation strategy, please come back later"
Towelroot v1.0 (tr.apk) --> "This phone isn't currently supported"
I did not want to try CF-Auto-Root because it says "If you have a Samsung-KNOX-enabled device, this package will trip the KNOX warranty flag. This flag cannot be reset, and will prevent some applications from working."
Is there really no way to get root without first installing TWRP ?
?
Okej... s6 Au Partation Table
: modem
Please Wait -- Please wait while stopping.
Read Done : NON-HLOS.bin
File Size : 6,00 MB
=======================================
Reading Partation : sbl1
Please Wait ..
Read Done : sbl1.mbn
File Size : ---
=======================================
Reading Partation : sbl1bak
Please Wait ..
Read Done : sbl1.mbn
File Size : ---
=======================================
Reading Partation : rpm
Please Wait ..
Read Done : rpm.mbn
File Size : ---
=======================================
Reading Partation : rpmbak
Please Wait ..
Read Done : rpm.mbn
File Size : ---
=======================================
Reading Partation : tz
Please Wait ..
Read Done : tz.mbn
File Size : ---
=======================================
Reading Partation : tzbak
Please Wait ..
Read Done : tz.mbn
File Size : ---
=======================================
Reading Partation : hyp
Please Wait ..
Read Done : hyp.mbn
File Size : ---
=======================================
Reading Partation : hypbak
Please Wait ..
Read Done : hyp.mbn
File Size : ---
=======================================
Reading Partation : fsg
Please Wait ..
Read Done : fs_image.tar.gz.mbn.img
File Size : ---
=======================================
Reading Partation : sec
Please Wait ..
Read Done : sec.dat
File Size : ---
=======================================
Reading Partation : splash
Please Wait ..
Read Done : splash.img
File Size : ---
=======================================
Reading Partation : aboot
Please Wait ..
Read Done : emmc_appsboot.mbn
File Size : ---
=======================================
Reading Partation : abootbak
Please Wait ..
Read Done : emmc_appsboot.mbn
File Size : ---
=======================================
Reading Partation : boot
Please Wait ..
Read Done : boot.img
File Size : ---
=======================================
Reading Partation : system
Please Wait ..
Read Done : system.img
File Size : ---
=======================================
Reading Partation : oem
Please Wait ..
Read Done : oem.img
File Size : ---
=======================================
Reading Partation : recovery
Please Wait ..
Read Done : recovery.img
File Size : ---
=======================================
Reading Partation : modemst1
Please Wait ..
Read Done : dummy.bin
File Size : ---
=======================================
Reading Partation : modemst2
Please Wait ..
Read Done : dummy.bin
File Size : ---
=======================================
Reading Partation : cache
Please Wait ..
Read Done : cache.img
File Size : ---
=======================================
Reading Partation : persist
Please Wait ..
Read Done : persist.img
File Size : ---
=======================================
Reading Partation : misc
Please Wait ..
Read Done : misc.img
File Size : ---
=======================================
Reading Partation : userdata
Please Wait ..
Read Done : userdata.img
File Size : ---
=======================================
Australia Update. flash in stock recovery
S6_SD_update
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com