Database Users

[A70B/IT2 HC][3.2.81 update] Enabling SDE and rooted firmware package

First:
Warning! This is only for A70B/A70IT2 Honeycomb model, It won't work on Froyo model!
Here is a package that enables unofficially SDE menu in recovery and install a rooted stock firmware with busybox and SuperUser.Apk
Pre-Requisite:
- Adb must be enabled on tablet and PC driver+adb command must be working. You can test on pc with "adb shell", it should give you a '$' prompt. If you don't have this, first make it work. There are multiple links around to help if needed.
Instructions:
- Unzip files on your pc in adb.exe directory.
- Launch enable_sde.bat on your pc. It's better to do it in a cmd.exe window, you'll be able to copy-paste log here if anything goes wrong.
- Follow instructions in the cmd window. Basically, script reboots tablet multiple times, you have to press enter when tablet is completely booted each time.
- Congratulation, your device is sde enabled and has a rooted sde firmware. Please read below for more information.
Upgrades:
If you already installed a first version and enabled sde already, here is how to install new rooted firmware:
- Optional: flash updated stock firmware. I always recommend to match stock firmware, it avoids dalvik-cache rebuilds and bootloaders may have been updated in new firmwares.
- Boot rooted firmware. You should be running rooted firmware if you want upgrade script to work. To be sure of that, you should see SuperUser app in your apps menu.
- Unzip files on your pc in adb.exe directory
- Launch upgrade.bat (or upgrade.sh for linux)
- Tablet reboots at the end to rooted firmware and should be upgraded to new version.
SDE information:
1) What is SDE?
SDE (Special Developer Edition) is basically a dual boot mechanism. It allows us to dual boot Archos stock firmware and our custom ones.
2) How does it work ?
I won't give much details on how to use it, I should do a separate topic about this one someday. Until then, here is some basic information:
- At the end of this script, you are booted with sde firmware, superuser should be in your start menu and you should be root with adb or any root app.
- If you reboot or boot, press volume up while booting, it will display the dual boot menu. Select "Developer Edition", it will start the rooted build (check here point 9 to see how it looks).
- If you missed volume key or don't do anything during reboot, you will go back to unrooted stock firmware. You have to press the volume up key during boot to get the boot menu.
- Warning: booting stock firmware is harmless except that you will loose your SuperUser.apk preferences. As it's not part of stock firmware, Android clears it.
- You can boot straight to rooted firmware by deleting the stock firmware kernel in recovery. Check here, do point 4,5, and on screen 6, select "Remove Android Kernel". Make sure that you have properly working SDE firmware before doing that. If you want to re-enable back stock firmware, just flash it from recovery again.
Downloads:
3.2.80 can be downloaded here: Mirror 1 (Mediafire), Mirror 2 (Sendspace).
3.2.81 can be downloaded here: Mirror 1 (SendSpace) (bat fixed)
Sorry, Mediafire no longer let me upload without signup, if you know one good upload location without registration and allowing more than 200 MB, let me know.

*reserved*

Registered just to say thank you!
Worked like a charm, and no problems using the shell script (I run Arch Linux)
Keep up the good work!

Thanks
I mean real thanks
Sent from my ARCHOS 70it2 using xda premium
EDIT:
Beautiful man, beautiful. Works splendidly
Thanks again

LeTama
Have a beer or two on me, 84G89322WT2139701.
Thanks again for your Rom.

Hi mrew42,
Thanks a lot! Much appreciated!

Tomorrow, my 70b return at home
I testing that !
but my 70bit2 is with 3.2.81

Letama, can you may be make the same for 3.2.81?

Yes, it will come soon...

3.2.81 is up and instructions on first post updated if you upgrade.

Great
http://www.jbmm.fr/?p=27601
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

cajl said:
Great
Click to expand...
Click to collapse
Nice job! Thanks for the article on jbmm!

Thanks, will try it out soon.

Thanks letama, this is just what I wanted. Awsome work!
I think there is an error in upgrade.bat and enable_sde.bat for 3.2.81.
The line that reads:
adb push android_32.ext4.update /media/
should read:
adb push android_32.ext4.update /data/media/
Also, upgrade.bat is missing the line that says:
adb shell rm /data/local.prop
Keep up the good work and thanks again.

ColinTaylor said:
I think there is an error in upgrade.bat and enable_sde.bat for 3.2.81.
The line that reads:
adb push android_32.ext4.update /media/
should read:
adb push android_32.ext4.update /data/media/
Click to expand...
Click to collapse
Ah! Right! Thanks for pointing it, I'll fix that and re-upload when I find time to do it.
Also, upgrade.bat is missing the line that says:
adb shell rm /data/local.prop
Click to expand...
Click to collapse
Yes, this is normal, this one is only needed when enabling sde first time. local.prop is coming from temp root and won't be there anymore.

I finally had time to try it out tonight, all seemed to be installed fine, but I don't see the Superuser in the apps list... I can boot into developers fw menu though. Did I miss something or should I just try to reinstall the SDE again by running that bat file again?

No, as ColinTaylor said, there is a typo in script, you just need to push the ext4.update at root of storage.
Just type this command in the directory you unzipped the files:
Code:
adb push android_32.ext4.update /data/media/
then boot sde.

Hello
As i have read your post about how to root 3.2.81, the instructions seems to confuse me, but what do you mean by adb? im sorry im kinda new at this ,please let me know thanks!

hello, first of all thanks for your work.
I am having some problems with the upgrade file.
it says that it cannot stat 'zImage':no such file or directory
and secondly it cannot open the kernel file (no such file or directory) mkf lashimage failed.
could you please provide some help with this?
thanks!

lozano.markp said:
Hello
As i have read your post about how to root 3.2.81, the instructions seems to confuse me, but what do you mean by adb? im sorry im kinda new at this ,please let me know thanks!
Click to expand...
Click to collapse
adb is a developer tool from android sdk that let you execute commands on your tablet from your PC. You have to install android sdk to get it, you need to enable it on the tablet and have a proper driver.

[How To] Root [I9100][ROM 4.1.2] With Stock Recovery

Root FJ10 Without Custom Kernel​
As we all know FJ10 has been released and is floating around the internet, and iv'e decided to share the way i rooted the leak (International SGS II) using stock samsung recovery
Credits
Chainfire CWM-Supersu
Sextape Leak​rwilco12 Continue to hosting leak
What you need
PC/MAC/Linux
ADB
USB Cable
Phone
CWM-SuperSU-v0.97.zip
There is two ways to flash the root package in custom recovery (sorry i keep forgetting the other way)
Thank You Sh4Dy for reminding me
Flash Trough Update
1) Download CWM-SuperSU-v0.97.zip
2) Rename CWM-SuperSU-v0.97.zip > update.zip
3) flash as an update
Instructions
1) Enter Recovery mode by holding power+volume up.
2) Connect USB Cable to the phone and PC
3) Choose Install Update with adb
now
4) Now in your terminal/CMD write adb sideload CWM-SuperSU-v0.97.zip
5) Look at the screen and you will see the update package being installed
Congratulations you got now a rooted FJ10 leak without flashing a custom kernel
Proof
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks, but I get stuck at 3.
I go to search -> cmd and then I type adb sideload CWM-SuperSU-v0.97.zip in it. I think this is wrong but I never worked with ADB.

how it works now? i don't get it also

dajumper said:
how it works now? i don't get it also
Click to expand...
Click to collapse
Works fine here
You need to install adb then cd to the adb directory, then type the command.

Why is it even in dev section?

Spyr0s said:
Works fine here
You need to install adb then cd to the adb directory, then type the command.
Click to expand...
Click to collapse
Will try that tomorrow!
Verstuurd van mijn GT-I9100 met Tapatalk

dajumper said:
how it works now? i don't get it also
Click to expand...
Click to collapse
Make sure you have adb installed on your pc
after that begin with step 1

Doesn't work at 4th step for me, I check devices in adb devices and it shows my device but some large-ass thing comes n it doesn't install the SuperSU zip for some reason

Same thing here

wrong thread. plz delete

ssilviu said:
Same thing here
Click to expand...
Click to collapse
did you also use the supersu provided in op?
Sh4Dy said:
Doesn't work at 4th step for me, I check devices in adb devices and it shows my device but some large-ass thing comes n it doesn't install the SuperSU zip for some reason
Click to expand...
Click to collapse
did you use: http://download.chainfire.eu/267/SuperSU/CWM-SuperSU-v0.97.zip

Hey guys, Just apply the .zip from external card via recovery, the .zip in OP, worked for me
Edit: Yes mate, I used that file only, you copied it from Sprint S2's JB thread? Coz I can see the screenshot is of Oct 11 firmware.

Sh4Dy said:
Hey guys, Just apply the .zip from external card via recovery, the .zip in OP, worked for me
Edit: Yes mate, I used that file only, you copied it from Sprint S2's JB thread? Coz I can see the screenshot is of Oct 11 firmware.
Click to expand...
Click to collapse
yes i did, as i know this will work with it too

Buy mobile odin, flash the rom, then you will get root. Quite simple.
I love new rom.
But it wipe all my data system apps...

bogdan1980 said:
Buy mobile odin, flash the rom, then you will get root. Quite simple.
I love new rom.
But it wipe all my data system apps...
Click to expand...
Click to collapse
that isn't mobile odin problem, its wiped automatically

Yeh man, it should work with this too, but idk, flashing zip did the job for me. Try it yourself

Sh4Dy said:
Hey guys, Just apply the .zip from external card via recovery, the .zip in OP, worked for me
.
Click to expand...
Click to collapse
failed to mount sdcard

Sh4Dy said:
Yeh man, it should work with this too, but idk, flashing zip did the job for me. Try it yourself
Click to expand...
Click to collapse
i added your instructions to OP and added you as credit for reminding me :highfive:

ssilviu said:
failed to mount sdcard
Click to expand...
Click to collapse
This is why adb sideload is powerful (as on sprint we were never able to access sdcard)

If you want, I can give proof, I'm currently restoring apps from Ti Backup Pro

[Utility] Desktop Rom Flasher!! (Drag Drop & Flash!)

Hello everyone, so I developed a small application called Desktop Flasher. All you need to do is drag the zip you want to flash and it'll automatically push it to your phone, write the appropriate script, and reboot you into recovery, and perform the flashing procedure. I hope to add new features (wireless support) as time goes on. Try it out and tell me what you think
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Drag Drop and Flash
Wipe Cache/Dalvik and Data
Changelog:
1.0
Initial Release
1.1
Minor Bug Fixes
Incorporated Silent Updater
1.2
Fixed Permission Issue
1.3
Created First Time Run Program to avoid any setup issues
Auto renames zips with spaces in their title
1.4
Small adjustment
Confirmed working on TWRP and CWM, I have not tested any other recovery, but it still should work the same. Please report back your findings.
Download and Extract the attached zip, and run Desktop Flasher.exe to launch,
When Launching the App for the very first time, I highly recommend that you update it to avoid any potential problems.
To Update the App just open it, and close it (via the usual x or exit button).
Source code: https://dl.dropboxusercontent.com/u/9134840/Desktop Flasher/Desktop Flasher.zip

FAQ
I get a failed to push script/or during the first run program it can't detect my device in recovery mode!
You probably don't have the drivers installed for adb in recovery mode. It's easy though! Follow this quick guide here: http://forum.xda-developers.com/showthread.php?t=1379875
Okay, so the program says "Great your Phone will do the rest" and my phone reboots into recovery, but nothing happens...wth??
Most likely the issue is that you're using a recovery that doesn't support openrecoveryscripting. (The official version of CWM and TWRP do)

How to connect device ? ... is debug mode?

phamtlsoft said:
How to connect device ? ... is debug mode?
Click to expand...
Click to collapse
Yes, just make sure USB debugging is on, and your drivers are already installed.

will it work with a Galaxy Note
Custom Rom and cwm
I made a few themes and had always to copy over the zips and flash them via phone
so I would be really happy if it will work on my device
sent from my G-Note

hara74 said:
will it work with a Galaxy Note
Custom Rom and cwm
I made a few themes and had always to copy over the zips and flash them via phone
so I would be really happy if it will work on my device
sent from my G-Note
Click to expand...
Click to collapse
Cool. Yeah this should work on any device, I and any recovery with Openscript available (TWRP and CWM). I haven't tested cwm but I can confirm that it works on TWRP.

filmaker said:
Cool. Yeah this should work on any device, I and any recovery with Openscript available (TWRP and CWM). I haven't tested cwm but I can confirm that it works on TWRP.
Click to expand...
Click to collapse
ok, thanks for ur answer
I'll give it a try and report the result
sent from my G-Note

when I drag&drop a zip,
it comes that massage: "Failed to Push Zip to SDcard"

hara74 said:
when I drag&drop a zip,
it comes that massage: "Failed to Push Zip to SDcard"
Click to expand...
Click to collapse
Hmmm...alright. Your phone is connected and USB debugging is enabled?

filmaker said:
Hmmm...alright. Your phone is connected and USB debugging is enabled?
Click to expand...
Click to collapse
yes
sent from my G-Note

hara74 said:
yes
sent from my G-Note
Click to expand...
Click to collapse
Alright, I think I figured it out. Does the location you're dropping from or the zip itself happen to have any "spaces" in the name? E.X. D:\documents\my rom\rom.zip

the zip definitely not,
but I look at folder on pc tomorrow,
now it's off already
will report then
sent from my G-Note

Alright Cool.
Released a new update, it'll fix possible flash errors in recovery.

jup, it was the spaces in the zip :good:
but now it shows: Failed to push Script
the files are copied to phone correctly

hara74 said:
jup, it was the spaces in the zip :good:
but now it shows: Failed to push Script
the files are copied to phone correctly
Click to expand...
Click to collapse
Okay, I just released an update that'll fix it. To update the program just open it, then hit the exit button, and it'll update. The problem was with some devices you can't push to /cache unless you're in recovery. When I'm running sense it works fine, but whenever I switch to AOSP, I would run into that issue. Fixed now

I used the new one v1.1
sorry, I just saw there's a 1.2
will try it again
sent from my G-Note
---------- Post added at 06:59 PM ---------- Previous post was at 06:51 PM ----------
I just tried it with the new 1.2,
but unfortunately it booted into recovery without doing anything else,
it´s like I would boot into recovery manually
then after a few seconds it pops up again: Failed to push Script :crying: :crying: :crying:

hara74 said:
I used the new one v1.1
sorry, I just saw there's a 1.2
will try it again
sent from my G-Note
---------- Post added at 06:59 PM ---------- Previous post was at 06:51 PM ----------
I just tried it with the new 1.2,
but unfortunately it booted into recovery without doing anything else,
it´s like I would boot into recovery manually
then after a few seconds it pops up again: Failed to push Script :crying: :crying: :crying:
Click to expand...
Click to collapse
Hmmm...alright. Lol thanks for being my only dignified tester haha. Okay, can you do me a favor. Download the zip I attached to this post, and run the recovery.bat file. (It'll reboot your device into recovery and attempt to push a file to your cache after a 25 second delay) and can you tell me the output. (Whether it pushes or gives a permission error) Thanks.

no problem m8,
I'm lucky to test a tool which helps me later
I'll test it later, bcs I have to watch a horror movie right now,
order from boss (my wife)
sent from my G-Note

I downloaded ur zip, extracted it and run the bat, but that´s the result:
it didn´t anything with my phone

hara74 said:
I downloaded ur zip, extracted it and run the bat, but that´s the result:
View attachment 2163004View attachment 2163005
it didn´t anything with my phone
Click to expand...
Click to collapse
Ooops, sorry forgot to throw in adb. Now try it.

Lenovo Vibe P1 STOCK ROM, CUSTOM ROM, ROOTING, UNROOTING, RECOVERY

Since the original Vibe P1 thread in Q&A became cluttered I propose to start a new topic devoted only to Vibe P1 ROM and customization
For general questions please apply to: http://forum.xda-developers.com/general/help/lenovo-vibe-p1-t3238360

Flashing with QFIL
First let your phone to be properly recognised by Windows:
1. Connect your Vibe to USB port
2. Upon popup on the phone "USB computer connection check "Media device" and "USB debugging" -
3. New disk "Lenovo suite" will appear in Windows.
4. Do not let autostart ( You can but it is not necessary as it will install whole Lenovo crap )
5. Explore the "Lenovo disk" and run "Lenovo usb driver"
6. After driver install finish reboot your PC ( not necessary - just to be shure everything is stable in Windows )
Environment preparation
1. Download and install QPST https://cloud.mail.ru/public/4yDt/6r6cDuGzK
2. Disconnect and power OFF you Vibe
3. Push Volume Up ( DO NOT PRESS POWER BUTTON ) and simultaneously connect Vibe to USB
4. If everything is OK VIBE will vibrate
5. Check your Windows Device Manager. In order to move further you HAVE TO find new serial port. Something like "Qualcomm......." It maybe Port 3 but may be other
Flashing
1. Unpack the ROM archive to any convenient folder on your HDD
2. Close ALL unnecessary programs running in background including antivirus ( providing constant data flow in flashing process is crucial )
3. Run QFIL in Windows
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer: Flashing recipe above was tested by me and fully working. This does not necessarily mean it will work for you. Flashing on your responsibility. Do not complain if you brick your phone.

MOST IMPORTANT NEWS
1. Marshmallow for c72 available. No root. Qfil flashable. . Read the topic.
2. Russians are cooking and testing Marshmallow custom ROM on their forum 30.03.2016

P1a42_S152_160126_ROW_root+busybox
Full stock rom P1a42_S152_160126_ROW ( NFC does not work still )
Root + busybox included
Download path:
https://cloud.mail.ru/public/5hQ2/qBfLtumLb
https://drive.google.com/file/d/0B2P_ip9hksA-M0ZhV3dWWjBaQ3M/view?usp=sharing
Flash with QFIL
No wipe necessary if coming from previous P1a42 ROM
Credits go to: http://lenovo-forums.ru/topic/16339...-основе-официальной-прошивки-s152_160126_row/

pabgar said:
NFC does not work still
Click to expand...
Click to collapse
Working fine but only on P1a42, not P1c72!

m0b said:
Working fine but only on P1a42, not P1c72!
Click to expand...
Click to collapse
I suspect that NFC hardware module in P1a42 is different then p1c72 - that is the reason.

Please help me, how to use QPST ?
Thanks

pabgar said:
I suspect that NFC hardware module in P1a42 is different then p1c72 - that is the reason.
Click to expand...
Click to collapse
"P1a42_S*_ROW" ROMs are for P1a42 this is why NFC don't work on P1c72 (thanks that NFC is only one broken)!

Keep up the good work !! Any luck with xposed by now ??

coolsid8 said:
Keep up the good work !! Any luck with xposed by now ??
Click to expand...
Click to collapse
After getting ROOT:
1. Download attaced xposed.zip (6.87 MB)
2. Unpack to internal storage download folder. And install all apk's this zip.
3. Open Terminal Emulator and type "su" hin Enter, confim superuser rights.
4. type "cd /storage/sdcard0/Download", press Enter, then type "su -c sh update-binary" and press Enter.
5. Ready!
Translated and updated XPosed installer from v79 to v80 by me.
All credits to enzogar@4pda: http://4pda.ru/forum/index.php?showtopic=678868&st=500#entry45765541
And also XPosed developper: http://forum.xda-developers.com/showthread.php?t=3034811

I have problem
I flash this rom but supersu not working?

Rikimaru 117 said:
I have problem
I flash this rom but supersu not working?
Click to expand...
Click to collapse
SuperSumeProV9.1.9.apk will help you to migrate from KingRoot to SuperSU!

after getting rid of KingRoot, SuperSu Me app can be unistalled while leaving SuperSu in the system

m0b said:
SuperSumeProV9.1.9.apk will help you to migrate from KingRoot to SuperSU!
Click to expand...
Click to collapse
what is the installation procedure of super sume and then how to install super su?. Thanks.

m0b said:
SuperSumeProV9.1.9.apk will help you to migrate from KingRoot to SuperSU!
Click to expand...
Click to collapse
Sent from my Lenovo P1a42 using Tapatalk

atf2m4 said:
what is the installation procedure of super sume and then how to install super su?. Thanks.
Click to expand...
Click to collapse
1. Install ROM rooted with KingRoot, like: http://forum.xda-developers.com/showpost.php?p=65104259&postcount=4
2. Install SuperSuMe.
3. Run, press big blue button, confim root permissions (KingRoot window will appeare) and wait till stage one finished.
4. Run SuperSU (if won't auto start) and install binary.
5. Reboot.
6. Run, press big blue button, confim root permissions (SuperSU window will appeare) and wait till stage two finished.
7. Delete SuperSuMe.
8. Ready!

I know this would void warranty. I am not worried about that either. Can I go back to stock ROM if I need Lenovo OTA or other reasons. ?
---------- Post added at 10:12 PM ---------- Previous post was at 10:10 PM ----------
pabgar said:
Full stock rom P1a42_S152_160126_ROW ( NFC does not work still )
No wipe necessary if coming from previous P1a42 ROM
Click to expand...
Click to collapse
Does that mean flashing this ROM will not wipe the data? It will just install the rooted ROM on top of existing ROM without touching the Data?
TIA

humbletechy said:
. Can I go back to stock ROM if I need Lenovo OTA or other reasons. ?
Click to expand...
Click to collapse
Shure, if you will have your original ROM files to flash
humbletechy said:
Does that mean flashing this ROM will not wipe the data? It will just install the rooted ROM on top of existing ROM without touching the Data?
Click to expand...
Click to collapse
So happened in my case. I came from previous P1a42 ROM and all data and apps remained untouched.

humbletechy said:
I know this would void warranty.
Click to expand...
Click to collapse
I think even warranty won't void if you flash stock ROM back!

pabgar said:
Shure, if you will have your original ROM files to flash
So happened in my case. I came from previous P1a42 ROM and all data and apps remained untouched.
Click to expand...
Click to collapse
Thanks, do you know where can I get the P1a42 ROM? I just updated to the latest one yesterday on which the rooted ROM based. Could have done proxy stuff to sniff the url!!

How to root Samsung Galaxy S3 GT I9300 & install Cyanogenmod 13.0

ATTENTION: This lesson is for advanced users, not for people who do not understand, what is going on!!! REQUIREMENT: Basic knowledges for Windows Operating Systems!!!
--------------------------------------------------------------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TESTED: Working without any errors and bugs.
Enjoy, Best Regards.
Steps:
1. Download Samsung driver: link, and install it.
2. Download and extract, md5 file CF-Auto-Root-m0-m0xx-gti9300: link
3. Install - run "Odin" from extracted md5 file!
4. Setup your Samsung Galaxy S3 to use usb debug mode, from > Settings > About device, tap couple of times on Build number to activate your Developers options then, activate usb debug mode!
5. Shutdown your phone, and then press volume down + home + power button, to load bootloader, after loading press volume up!
6. Connect your phone with usb cable in to your computer, and wait to displaying message from Odin software, for openly device!
7. Click on PDA button from Odin software, and load CF-Auto-Root-m0-m0xx-gti9300.tar.md5 from already done extract, md5 file.
8. Press Start button from Odin software, and wait little time...
9. After finish, the phone will to reboot automatically, and you are finished. Congratulation, you are owner on your phone!!!
---------------------------------------------------------
0. After rooted:
1. Install SuperSU
2. Install busybox
3. Install Terminal emulator - for advanced users
4. Flash with TWRP recovery, if you want repeat step 7. But you have to load TWRP file (twrp-3.0.2-1-i9300.img.tar) in to "PDA" TWRP. Press volume up + home + power button if you want to use TWRP bootloader
5. NOTE: When you decide to install custom ROM, you have to use TWRP recovery!

nu11secur1ty said:
Steps:
1. Download Samsung driver: link, and install it.
2. Download and extract, md5 file CF-Auto-Root-m0-m0xx-gti9300: link
3. Install - run "Odin" from extracted md5 file!
4. Setup your Samsung Galaxy S 3 to use usb debug mode, from > Settings > About device, tap couple of times on Build number to activate your Developers options!
5. Shutdown your phone, and then press volume down + home + power button, to load bootloader!
6.
Click to expand...
Click to collapse
Not sure but this thread is as useless as tits on a fish. Really. There are dozens of threads similar to this one. Sorry.

Root problem
Alexander_the_B0ss said:
Not sure but this thread is as useless as tits on a fish. Really. There are dozens of threads similar to this one. Sorry.
Click to expand...
Click to collapse
When I root my phone, the root checker did not root

trujulu said:
When I root my phone, the root checker did not root
Click to expand...
Click to collapse
I don't have enough time, to explain in everyone! Please look at description in the top of this post!!!
Best Regards.

Alexander_the_B0ss said:
Not sure but this thread is as useless as tits on a fish. Really. There are dozens of threads similar to this one. Sorry.
Click to expand...
Click to collapse
Yes i see, you are not sure.
BR

nu11secur1ty said:
Yes i see, you are not sure.
BR
Click to expand...
Click to collapse
Yea...
Now I am sure.

Alexander_the_B0ss said:
Yea...
Now I am sure.
Click to expand...
Click to collapse

imo its useless, on forum you can find