I've been having this problem for a while, I've tried many things to fix it, like flashing the baseband, flasing the stock samsung rom, nothing helps though.
No matter what I try it's still stuck on NB1 and it causes a bunch of problems, anyone has any idea how to fix this?
arboy2 said:
I've been having this problem for a while, I've tried many things to fix it, like flashing the baseband, flasing the stock samsung rom, nothing helps though.
No matter what I try it's still stuck on NB1 and it causes a bunch of problems, anyone has any idea how to fix this?
Click to expand...
Click to collapse
Reflash the same firmware 2 times and it solve the problem.
I will try this if no one else gives a simpler solution
Did you power off your phone and then boot up directly into download mode?
Are flashing a full stock image or just the bootloader and modem?
Did Odin give you any errors or did it say everything was successful.
Note: you really haven't provided any information which makes it difficult to help you.
Sent from my SM-N9005
BillGoss said:
Did you power off your phone and then boot up directly into download mode?
Are flashing a full stock image or just the bootloader and modem?
Did Odin give you any errors or did it say everything was successful.
Note: you really haven't provided any information which makes it difficult to help you.
Sent from my SM-N9005
Click to expand...
Click to collapse
+1
Do not "reboot" into download mode when trying to Odin a new firmware or modem. Turn the phone all the way off and boot into download mode using the hardware key combination and the Odin.
Sent from my SM-N910P using Tapatalk
BillGoss said:
Did you power off your phone and then boot up directly into download mode?
Are flashing a full stock image or just the bootloader and modem?
Did Odin give you any errors or did it say everything was successful.
Note: you really haven't provided any information which makes it difficult to help you.
Sent from my SM-N9005
Click to expand...
Click to collapse
I did power off the phone and booted up download mode.
I flashed a full stock image and tried just the bootloader and modem.
And Odin gave no errors during the flash.
Sorry for not giving the required info!
Interesting!
Did you have auto reboot checked when you flashed the stock image?
I've found that you have to have it checked as there's some additional processing that needs to get done when the phone reboots into recovery after flashing the stock image.
Sent from my SM-N9005
So I downloaded the bootloader from here: http://forum.xda-developers.com/galaxy-note-3/general/ref-galaxy-note-3-sm-n9005-gsm-modems-t2842806
Followed the guide, then before booting the phone I flashed the bootloader again following the guide, and boom now I'm on BOA1 xD
The thread can be locked I guess, thanks for all the help!
Related
I bricked it. I had TWRP installed, and running a debloated Odexed version of Stock. I attempted to flash Slim Bean 6.5 Weekly with Aroma addons. The Aroma ended up borking my recovery. It bootloops pre-recovery mode. I can get into Download mode and Odin'd back to Stock, but it's still won't go into recovery and vibrate loops with a black screen.
Anyone know how to fix this? Damn locked bootloader!!!
Did you try and reflash recovery ? Does the phone boot up once you restore via Odin ?
Have you tried flashing twrp via Odin?
I have not tried flashing TWRP with Odin... is there a Odin version of TWRP?
It did not boot after flashing stock. I'd like to Odin TWRP if it's available.
I found an Odin TWRP.tar for SGS3, but nothing for S4, yet. Need a little more help.
Did you try rooting and flashing twrp via goomanager? I had something similar happen to me on my skyrocket and that's how I fixed it.
Aroma does not work on the GS4 yet. At least that is what I have been reading.
Sent from my SAMSUNG-SGH-I337 using xda premium
TheAxman said:
Aroma does not work on the GS4 yet. At least that is what I have been reading.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
This version of CWM claims to work with Aroma on the S4...
http://forum.xda-developers.com/showthread.php?t=2322682
scott14719 said:
This version of CWM claims to work with Aroma on the S4...
well lets take a look see...shall we. thanks
Click to expand...
Click to collapse
came across this thread: http://forum.xda-developers.com/showthread.php?t=2281287
it converts an img to an odin-flashable tar.
i went ahead and converted the latest twrp img for the at&t S4 and have attached it. i have not tested it as i am not near my device at the moment. if you decide to try it, unzip the tar.md5 and flash at your own risk as i have not tested this method by @cabloomi.
False aroma works fine with twrp on a gs4.
Sent from my SGH-I337 using Tapatalk 4 Beta
This happened to me. Use odin to put TWRP back on. You'll be fine.
Sent from my SGH-I337 using Tapatalk 2
Yeah I had this a couple different times trying to get rid of the custom/lock icon boot up. Flash fresh stock rom, root it and install recovery with "Root and Recovery for ATT-TMO GS4-CASUAL-R527b" --> http://forum.xda-developers.com/showthread.php?t=2297900 then flash the recovery you want etc, and restore Nandroid of backed up rom. Worked for me!
Everyone keeps saying to Odin TWRP like it's a common thing. I have yet to find a Odin version of TWRP that's loki'd for the S4. If you have done this, and it worked, please supply a link to the correct file. In this case an Odin version of TWRP. Thank you
JJ5150 said:
I bricked it. I had TWRP installed, and running a debloated Odexed version of Stock. I attempted to flash Slim Bean 6.5 Weekly with Aroma addons. The Aroma ended up borking my recovery. It bootloops pre-recovery mode. I can get into Download mode and Odin'd back to Stock, but it's still won't go into recovery and vibrate loops with a black screen.
Anyone know how to fix this? Damn locked bootloader!!!
Click to expand...
Click to collapse
I had a similar issue. When you hold the key combination to boot into recovery, do it for more than one cycle. Sometime for some reason it doesn't take the first time so keep holding the buttons. After getting into android recovery, clear cache and reset the phone.
JJ5150 said:
Everyone keeps saying to Odin TWRP like it's a common thing. I have yet to find a Odin version of TWRP that's loki'd for the S4. If you have done this, and it worked, please supply a link to the correct file. In this case an Odin version of TWRP. Thank you
Click to expand...
Click to collapse
When I had the problem is sounds like your having I Odined the Stock image back to the phone and then cleared the dalvik and cache with the stock recovery menu, then I was able to boot, I then rooted and used the debloater program found here on the forums and then just downloaded goomanager and installed TWRP, the one it pushes is LOKIed for you.
This is also the only .img file I can find for the our version of TWRP. IIRC you can use Odin to flash it
EDIT: Like trublu said, you may have to do it several times (clearing the caches in the stock recovery after ODIN)
JJ5150 said:
Everyone keeps saying to Odin TWRP like it's a common thing.
Click to expand...
Click to collapse
you are correct in that twrp has not posted tars on their website yet for download. they have, however, posted imgs. find a way or find someone to convert that img to an odin-flashable tar and you'll be all set.
JJ5150 said:
I have yet to find a Odin version of TWRP that's loki'd for the S4.
Click to expand...
Click to collapse
i believe that all s4 recoveries are "loki'd", if you will.
xBeerdroiDx said:
you are correct in that twrp has not posted tars on their website yet for download. they have, however, posted imgs. find a way or find someone to convert that img to an odin-flashable tar and you'll be all set.
i believe that all s4 recoveries are "loki'd", if you will.
Click to expand...
Click to collapse
The Tmo and Sprint variants do not require Loki'd recoveries, as their bootloaders are not locked.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
After trying many options available to me such as, Flashing Stock with Odin and trying to access recovery via the three finger method, and trying to convert a TWRP.img file to a .tar file... which I managed to successfully flash, but to no avail. I'm stuck at the vibrating boot loop dead screen, soft brick scenario.
I found these guys in a similar thread http://mobiletechvideos.com/
I called them and they were really nice and professional. I shipped out my phone for Brick Repair today. I believe I'll be happy with the results from these guys from they way they conduct themselves in their videos.
I'll report back when I have my fixed, unbricked S4 back in my hands
JJ5150 said:
After trying many options available to me such as, Flashing Stock with Odin and trying to access recovery via the three finger method, and trying to convert a TWRP.img file to a .tar file... which I managed to successfully flash, but to no avail. I'm stuck at the vibrating boot loop dead screen, soft brick scenario.
I found these guys in a similar thread http://mobiletechvideos.com/
I called them and they were really nice and professional. I shipped out my phone for Brick Repair today. I believe I'll be happy with the results from these guys from they way they conduct themselves in their videos.
I'll report back when I have my fixed, unbricked S4 back in my hands
Click to expand...
Click to collapse
They do great work..used them 2 years ago. With a mytouch..ouch..
Sent from my SAMSUNG-SGH-I337 using xda premium
JJ5150 said:
After trying many options available to me such as, Flashing Stock with Odin and trying to access recovery via the three finger method, and trying to convert a TWRP.img file to a .tar file... which I managed to successfully flash, but to no avail. I'm stuck at the vibrating boot loop dead screen, soft brick scenario.
I found these guys in a similar thread http://mobiletechvideos.com/
I called them and they were really nice and professional. I shipped out my phone for Brick Repair today. I believe I'll be happy with the results from these guys from they way they conduct themselves in their videos.
I'll report back when I have my fixed, unbricked S4 back in my hands
Click to expand...
Click to collapse
It's called Jtag repair. And the guys you mentioned have saved many a ass with it. I've seen several good results. Unless something else is found, it is the only way I know of to fix a truly bricked phone. Some people (those who flash a lot and Dev a lot) have their own Jtag boxes.
BTW, which tool / method did you use to convert the .img to a TAR? I've seen a couple of methods and a tool or two but I was wondering if you used something I don't know about? TIA.
I updated CM10.2 this morning to the latest nightly and since have not been able to access the recovery or boot to android. I have tried flashing a new recovery and stock image using Odin3 v1.85 but have not had any results. Any recommendations as to what I can do to fix this?
ferrerj said:
I updated CM10.2 this morning to the latest nightly and since have not been able to access the recovery or boot to android. I have tried flashing a new recovery and stock image using Odin3 v1.85 but have not had any results. Any recommendations as to what I can do to fix this?
Click to expand...
Click to collapse
First of all we need more information than this. For example, what files you downloaded and trying to use in odin and such and pics of odin error would mostly help us out more. Since you basically saying you cant boot to recovery nor you can odin back to stock. We get stumped and theres no way to help and just randomly telling you things to do. So the more info you can provide the better and faster solution we can provide you. Thanks
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
First of all we need more information than this. For example, what files you downloaded and trying to use in odin and such and pics of odin error would mostly help us out more. Since you basically saying you cant boot to recovery nor you can odin back to stock. We get stumped and theres no way to help and just randomly telling you things to do. So the more info you can provide the better and faster solution we can provide you. Thanks
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I am actually not getting any errors from Odin. Its just the fact that my phone will boot loop continuously. I've tried letting it sit for ~20 min but it just says Samsung. I have tried booting to the recovery but the phone will then just reboot and try loading the system which does not load past the Samsung boot animation. I have been trying to flash the following stock tar file:
L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5
as found in this thread:
http://forum.xda-developers.com/showthread.php?t=2259513&highlight=odin
I have also tried flashing the TWRP version 2.6.1.0 and 2.6.0.0 tar files using Odin also without any luck.
Does this help?
ferrerj said:
I am actually not getting any errors from Odin. Its just the fact that my phone will boot loop continuously. I've tried letting it sit for ~20 min but it just says Samsung. I have tried booting to the recovery but the phone will then just reboot and try loading the system which does not load past the Samsung boot animation. I have been trying to flash the following stock tar file:
L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5
as found in this thread:
http://forum.xda-developers.com/showthread.php?t=2259513&highlight=odin
I have also tried flashing the TWRP version 2.6.1.0 and 2.6.0.0 tar files using Odin also without any luck.
Does this help?
Click to expand...
Click to collapse
Yes it does. Now what happens when you odin mdc file?
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
Yes it does. Now what happens when you odin mdc file?
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
That did the trick. Thanks.
RESOLVED:
- Flashed a stock firmwire image from Sammobile using Odin. (AMDL)
- Did a factory reset in the stock recovery TWICE to get it to finally boot.
- Rooted with motochopper
- Installed TWRP
- Back to Task650.
Okay, so I'm a bit stuck. I was running the newest Task650 rom and KT's 9/17 kernel.
I updated to the 10/20 kernel as soon as it was released and it bugged my phone. Blew up everything, glitched my DPI and colors. It was unusable, however the weirdest part is that my custom recovery was removed so I can't seem to flash the old kernel to get my device back to normal.
I tried using odin but it just keeps failing, so I really am unsure what to do now. If I could get the previous kernel back onto it, it would be fine.
Any help? I can't seem to find a .tar.md5 file for TWRP or clockworkmod to flash a new recovery in Odin. I tried Philz .tar.md5 files but it fails as well.
Click to expand...
Click to collapse
As long as your not MF3
try goo manager for TWRP
or
Try ROM manager just to flash CWM
Note: do not use ROM manager for nothing else if you didn't already know.
Sent from my GT-I9505G using xda premium
jball said:
As long as your not MF3
try goo manager for TWRP
or
Try ROM manager just to flash CWM
Note: do not use ROM manager for nothing else if you didn't already know.
Sent from my GT-I9505G using xda premium
Click to expand...
Click to collapse
I cannot use the Google Playstore.. my entire screen is over scaled and impossible to navigate.
So no use of DPI settings.can you use ADB or terminal emulator
Sent from my SAMSUNG-SGH-I337 using xda premium
when you say you tried odin, are you saying you tried flashing the stock rom (MDL), tried flashing a custom recovery tar, or both? what error is it giving?
unfortunately i think kt accidentally uploaded a 4.2.2 kernel and thats what you downloaded. check out his thread and see what anyone else in your situation may have done already to remedy this. good luck
Can you reroot by flashing an autorooter through download mode? Doing so might enable you to flash kernels again.
Is factory reset an option?
xBeerdroiDx said:
when you say you tried odin, are you saying you tried flashing the stock rom (MDL), tried flashing a custom recovery tar, or both? what error is it giving?
unfortunately i think kt accidentally uploaded a 4.2.2 kernel and thats what you downloaded. check out his thread and see what anyone else in your situation may have done already to remedy this. good luck
Click to expand...
Click to collapse
I managed to get the latest stock firmwire (AMDL 4.2.2) off of Sammobile. I did successfully flash the stock .tar.md5 image through Odin, using the PDA slot. Phone seemed to restart and boot right up, but now gets stuck at the AT&T logo. It makes the boot sound and than BAM; frozen.
Now I am truly stuck. Seems flashing the stock image didn't work.. unless I did it wrong through Odin but I doubt it. These are the steps I took,
- Start Odin
- Connect phone in downloaded mode
- Click PDA (select the I337UCUAMDL_I337ATTAMDL_ATT.tar.md5 file)
- Wait for it to confirm the firm, than hit start.
- After waiting about 5 minutes it's successful.
Am I doing ANYTHING wrong?
Te3k said:
Can you reroot by flashing an autorooter through download mode? Doing so might enable you to flash kernels again.
Is factory reset an option?
Click to expand...
Click to collapse
Do a factory reset in the stock recovery after you flash with Odin. It'll get you past the boot loop.
jd1639 said:
Do a factory reset in the stock recovery after you flash with Odin. It'll get you past the boot loop.
Click to expand...
Click to collapse
Did a Factory reset in the stock recovery, wiped all data etc. Still gets stuck at the AT&T logo.
EDIT: Did it twice and it worked!
Br4nd3n said:
Did a Factory reset in the stock recovery, wiped all data etc. Still gets stuck at the AT&T logo.
EDIT: Did it twice and it worked!
Click to expand...
Click to collapse
How long have you given the boot? The first boot can take a long time. 5 minutes or more isn't unheard of.
jd1639 said:
How long have you given the boot? The first boot can take a long time. 5 minutes or more isn't unheard of.
Click to expand...
Click to collapse
Gave it about 2 hours the first time.. knew it was stuck. However I did the factory reset twice in a row, and it finally booted. Just did a quick root through Motochopper, installed TWRP and now I'm back and running on Task650 :good:
Good deal
Sent from my GT-I9505 using xda premium
Br4nd3n said:
Gave it about 2 hours the first time.. knew it was stuck. However I did the factory reset twice in a row, and it finally booted. Just did a quick root through Motochopper, installed TWRP and now I'm back and running on Task650 :good:
Click to expand...
Click to collapse
:good:
So, I'm having a big problem with my S4 at the moment. After having some problems with several apps, being that I couldn't properly open, restore, or uninstall them (I think it has to do with Foldermount), I decided to format my external SD card, and perform a factory reset. Everything seemed like it was working well, and when it rebooted and asked if I wanted to repair root access, I said 'yes' (not sure if that has anything to do with the issue). Then, after some time, it went on with the boot up. However, it was stuck at the samsung logo. So, I tried to go into download mode, like people were suggesting. I held down UP volume, and the power button, but all this does for me is turn off the device. I can't seem to get into recovery mode to perform another reset, and I can't even get into download mode. Also, when I try to turn off my phone using the power button, while it's in the seemingly infinite boot up, it instantly turns back on. The only way I can turn it off is by removing the battery. So, any help would be greatly appreciated, I have no idea what to do. Thanks in advance
To get into download mode hold vol down, power, and home buttons. You might have to flash the stock firmware in Odin at this point. What recovery are you using?
Sent from my Nexus 5 using XDA Free mobile app
Huh, well, download mode works. Could've sworn I'd already tried that combination. I guess I'll try using Odin. Sorry, what do you mean by 'what recovery'?
Update: Just tried the flash recovery with Odin. I think I did it right. I then went into recovery mode (turns out was doing it wrong), and cleared the caches, did another factory reset, then did the recovery reboot. Even after that, I still can't get past the infinite boot up load screen. Any suggestions? Thanks
lordcrunch said:
Update: Just tried the flash recovery with Odin. I think I did it right. I then went into recovery mode (turns out was doing it wrong), and cleared the caches, did another factory reset, then did the recovery reboot. Even after that, I still can't get past the infinite boot up load screen. Any suggestions? Thanks
Click to expand...
Click to collapse
What recovery are you trying to flash in Odin? And do you know what firmware version your device is on? my guess is that you're on a firmware version that you can't use a custom recovery other than safestrap. You're most likely going to have to flash the stock firmware in Odin to get your device to work.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
What recovery are you trying to flash in Odin? And do you know what firmware version your device is on? my guess is that you're on a firmware version that you can't use a custom recovery other than safestrap. You're most likely going to have to flash the stock firmware in Odin to get your device to work.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I'm currently trying to find a proper download link for the stock firmware for my phone. My version is 4.4.2 by default. I was trying to flash the wrong recovery at first, and then I tried a clockworkmod touch recovery, which hasn't helped. Unfortunately, I can't find a legit download for the stock firmware. I337MVLUFNI2 – TLS, it's the name of the stock version of my phone, while using the latest 4.4.2
lordcrunch said:
I'm currently trying to find a proper download link for the stock firmware for my phone. My version is 4.4.2 by default. I was trying to flash the wrong recovery at first, and then I tried a clockworkmod touch recovery, which hasn't helped. Unfortunately, I can't find a legit download for the stock firmware. I337MVLUFNI2 – TLS, it's the name of the stock version of my phone, while using the latest 4.4.2
Click to expand...
Click to collapse
You have an i337m. Go to sammobile.com for the stock firmware.
Sent from my Nexus 5 using XDA Free mobile app
Your not using the right stock firmware do as above said.
So my beloved note 4 is very poorly and I'm unsure of how to fix her
Phone turns on and boots, sometimes takes longer than others, and I can get to Download mode and recovery.... So maybe there's hope?
It's back on stock kit kat..... Here are it's issues.
Random freezes and reboots,
Sometimes the imei is unknown, pulling sim and rebooting and dialling *#06# brings it back temporarily.
This all happened very suddenly after a MM OTA update but maybe just a coincidence.
What I've tried so far, flashed stock KK with odin and wiped in recovery, none helped.
I've downloaded the n910f 4 file repair firmware that was kindly posted in another thread, but I've read conflicting advice about ticking the repartition option in odin.... Some said do it and someone else said this would wipe my imei... Which would be obviously bad.
Has anyone had similar issues to me and found a solution? I'd be eternally grateful for any help, I love this phone and want to save it. Please help.
Kind regards steve.
Sent from my SM-T800 using Tapatalk
Odin it to 6.0
Ghanaboy said:
Odin it to 6.0
Click to expand...
Click to collapse
Thanks for the reply, I've tried that already but the flash failed in odin, KK will flash. I thought this strange but after I reset the phone when the issues first started it went from MM back to its original firmware KK. Now only KK will flash successfully.
I'm open to all solutions.
Sent from my SM-T800 using Tapatalk
gingerdude said:
Thanks for the reply, I've tried that already but the flash failed in odin, KK will flash. I thought this strange but after I reset the phone when the issues first started it went from MM back to its original firmware KK. Now only KK will flash successfully.
I'm open to all solutions.
Sent from my SM-T800 using
grab 4 files lollipop repair firmware with pit file from www.tsar3000.com.
Flash in odin.
Once complete do factory reset.
Now go ahead and flash MM firmware with pit file that you get from repair firmware.
Again factory reset.
Done.
Click to expand...
Click to collapse
Trex888 said:
gingerdude said:
Thanks for the reply, I've tried that already but the flash failed in odin, KK will flash. I thought this strange but after I reset the phone when the issues first started it went from MM back to its original firmware KK. Now only KK will flash successfully.
I'm open to all solutions.
Sent from my SM-T800 using
grab 4 files lollipop repair firmware with pit file from www.tsar3000.com.
Flash in odin.
Once complete do factory reset.
Now go ahead and flash MM firmware with pit file that you get from repair firmware.
Again factory reset.
Done.
Click to expand...
Click to collapse
thank you for the reply....do I click re partition in odin when flashing the repair firmware? it won't erase imei will it. sorry for lame questions but I just want to be sure .
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
gingerdude said:
Trex888 said:
thank you for the reply....do I click re partition in odin when flashing the repair firmware? it won't erase imei will it. sorry for me questions but I just want to be sure .
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
In odin options dont tick on "erase imei"
Just tick on re partition , nand erase all & auto reboot.
Make sure do factory reset & wipe cache from stock recovery after flash.
Click to expand...
Click to collapse
Trex888 said:
gingerdude said:
In odin options dont tick on "erase imei"
Just tick on re partition , nand erase all & auto reboot.
Make sure do factory reset & wipe cache from stock recovery after flash.
Click to expand...
Click to collapse
Firstly I'd like to thank you for your time and help.
Thought I'd share what happened. I flashed the 4 files and pit file and it failed right at the end, tried 2 different odin versions with same results. This left me without recovery and the triangle of death saying please connect to kies.
I could still get into download mode so I flashed just the ap file from the recovery firmware, It passed but the boot took 20 minutes and at that point I pulled the battery and got Into recovery and after 2 minutes or so the blue line went by itself and it rebooted to lollipop 5.0.1
I can make phone calls and install apps, it's just a little laggy but may improve after it settles down.
Do you think I should quit while ahead? Flash MM In odin or let the phone OTA update?
Thanks again and any further thoughts appreciated.
Cheers
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
gingerdude said:
Trex888 said:
Firstly I'd like to thank you for your time and help.
Thought I'd share what happened. I flashed the 4 files and pit file and it failed right at the end, tried 2 different odin versions with same results. This left me without recovery and the triangle of death saying please connect to kies.
I could still get into download mode so I flashed just the ap file from the recovery firmware, It passed but the boot took 20 minutes and at that point I pulled the battery and got Into recovery and after 2 minutes or so the blue line went by itself and it rebooted to lollipop 5.0.1
I can make phone calls and install apps, it's just a little laggy but may improve after it settles down.
Do you think I should quit while ahead? Flash MM In odin or let the phone OTA update?
Thanks again and any further thoughts appreciated.
Cheers
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
Did you wip cache & factory reset after flash ?
Yes you can flash mm with pit file but must do factory reset after every flash to get clean operating system and avoid bootloops.
I suggest flash in odin mm instead of ota to avoid any issues.
Once your phone boot do not touch just let it rest for atleast 10 minutes to settle down.
Click to expand...
Click to collapse
Trex888 said:
gingerdude said:
Did you wip cache & factory reset after flash ?
Yes you can flash mm with pit file but must do factory reset after every flash to get clean operating system and avoid bootloops.
I suggest flash in odin mm instead of ota to avoid any issues.
Once your phone boot do not touch just let it rest for atleast 10 minutes to settle down.
Click to expand...
Click to collapse
just a quick update...when I flashed the repair lollipop firmware and it failed right at the end and I flashed stock lollipop and it booted .....the phone runs smoothly now and no crashes but I've got a another issue....the baseband is unknown and imei is null. d'oh
I've flashed MM and all is working great except I've still got the unknown baseband imei null.....
do you think it's missing it's modem....cp file or corrupted ems folder?
is there a fix apart from service center?
any help you could offer would be great.. cheers.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse