Is it possible to manage the led notifications?
Like in Kaiser Notification Leds. I wonder if the Leo can do more colors except green amber, does anybody know?
I would also like to know this Id love to change the actual LED to a brighter one.... but I know nothingabout LED hardware
I dunno about the notification LEDs, but you can control the button's LEDs with leoNotify
ok i was wondering... why is there two LEDs on HTC maple and only one is being used
I noticed that too. There's got to be an app that allows you to customize how they blink. I used an old one for HTC phones but is not compatible.
I'm pretty sure the "light" on the right side of the phone is the sensor that automatically dims the backlight if you have the option turned on. I don't think it's an LED at all.
I think that there is only one LED diode exactly on the left side on the right side is a light sensor.
http://forum.xda-developers.com/showthread.php?t=680231
I didn't see anything about the second LED from that link. So does this mean the other LED will not blink?
It's not an LED.
jinbuster said:
ok i was wondering... why is there two LEDs on HTC maple and only one is being used
Click to expand...
Click to collapse
The left side is a bi-colour LED with (maybe tri-colour) but so far I have only seen green and orange. Red maybe the third colour. Unlike the HTC Hermes 200 (Tytn) that had a second LED that was flashed blue when the bluetooth was active, the HTC Maple does not seem to have it. The right lens is actually a light sensor for the keyboard backlight *IF* you wish to use that feature which quite frankly SUCKS as I can't see anything most of the time because it doesn't switch on the backlight when you really need it.
I would prefer if it actually controls screen brightness. I wonder if there's a patch for that?
astrise said:
I would prefer if it actually controls screen brightness. I wonder if there's a patch for that?
Click to expand...
Click to collapse
Doubtful as it only seems to be a on or off command and not a on at level command. I just wish that it would be adjustable for light level setting as it never comes on in low light conditions when it should unless you cover it with a finger.
Hi has anyone found a app that is.compatible with the galaxy tab led.flash light?
I have tried the following but no success so far.
Mobile light
Switch widget pro light widget toggle
Simple light (which claims to be compatible.with galaxy tab)
Led light
A few others that I have since removed.
Cheers
Sent from my GT-P1000 using Tapatalk
bendjlee said:
Hi has anyone found a app that is.compatible with the galaxy tab led.flash light?
I have tried the following but no success so far.
Mobile light
Switch widget pro light widget toggle
Simple light (which claims to be compatible.with galaxy tab)
Led light
A few others that I have since removed.
Cheers
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Use tiny flashlight + led, in the app itself(not working in widget), once the light is on, press on the onscreen button again while the light is still on to keep it on, press that button again to off it.
Meaning, press once to turn it on, press it again while the light is on to keep it on, press 3rd time to turn it off. It's obviously a bug, but great workaround for our overprotective tab
WARNING: Extensive use might damage the hardware as it does create heat.
Thanks,
it doesn't seem to work but i have a suspicion that it may be to do with the Kernel that i am currently on ([OC1.2&1.4GHz][KernelPatch])
might jump back over to modaco's and see what results i get
Yeah I once used LED Light by picolyl , its in market . It worked nice on my JMEv2
Sent from my GT-P1000 using XDA App
Cheers, ive got both the Flash Light apps now and i have just installed the modaco Kernel to see if it resolves my light light issue.
Seems to be working "better" (i.e. the flash light does come on now) but my light goes on and off while using these programs
I wonder if its an issue compatibility issue then. as i am also running overcome rom 1.1.3 + modaco kernel similar to your setup.
bendjlee said:
Cheers, ive got both the Flash Light apps now and i have just installed the modaco Kernel to see if it resolves my light light issue.
Seems to be working "better" (i.e. the flash light does come on now) but my light goes on and off while using these programs
I wonder if its an issue compatibility issue then. as i am also running overcome rom 1.1.3 + modaco kernel similar to your setup.
Click to expand...
Click to collapse
Do as I said previously, and u will have light keeps on instead of couple sec off, remember, when the light is on, press the button again!! Not working in widget mode, please follow instructions to the word before saying it's not working.
Have a look at 'Flashlight' in the market too. Does the LED light, but also has some fun options for the screen. Red/blue flashing lights, Amber warning lights, etc. Works fine on my Tab.
fastcx said:
Use tiny flashlight + led, in the app itself(not working in widget), once the light is on, press on the onscreen button again while the light is still on to keep it on, press that button again to off it.
Meaning, press once to turn it on, press it again while the light is on to keep it on, press 3rd time to turn it off. It's obviously a bug, but great workaround for our overprotective tab
WARNING: Extensive use might damage the hardware as it does create heat.
Click to expand...
Click to collapse
It can't be that damaging, as its on when you record a video
Sent from my Galaxy Tab of awsomeness
natious said:
It can't be that damaging, as its on when you record a video
Sent from my Galaxy Tab of awsomeness
Click to expand...
Click to collapse
just for the sake of warning tho, 1 thing I noticed is that the light density is a bit different from still photo flash vs video light
ukjeeper said:
Have a look at 'Flashlight' in the market too. Does the LED light, but also has some fun options for the screen. Red/blue flashing lights, Amber warning lights, etc. Works fine on my Tab.
Click to expand...
Click to collapse
+1 for flashlight!
There's a kernel patch for phones with back-lit touch buttons called BLN that gives you notification for calls or texts by blinking,
It works for SGS and Also the Nexus S
Can someone apply these patches for SG3?
After all even SG3 has the backlight like the SGS
Kernel developers,
This one's for you,
Link for the patch -> https://github.com/neldar/backlightnotification
Only the i1501 has backlight. The i5800 doesn't.
Humpie said:
Only the i1501 has backlight. The i5800 doesn't.
Click to expand...
Click to collapse
Yeah, For the I5801 maybe?
Is there a way to make notification led to flash when phone registers doubletap2wake?
On stock rom led flashes just before screen turns on when I use knockon.
I don't believe so. I think that would have to be programmed in the kernel with Knock On/DT2W.