Hello guys,
my son has a ZTE A7, and he was dumb enough to set lock screen with a complicated pattern which he forgot.
When he tried to unlock the phone, he wasn't able to do it and now it is locked.
He gets a message saying that there where too many failed attempts to unlock the phone, and the it asks for the gmail user and pwd. This would be great if wi-fi or 3g was active, which is not the case.
I've searched and found some ways to unlock the phone, but I'm stuck because phone isn't rooted usb debugging may or may not be enabled.
Any suggestion on how to workaround this? Or does he owns now a nice brick?
Thanks a lot if anyone can give an idea.
vmatias said:
Hello guys,
my son has a ZTE A7, and he was dumb enough to set lock screen with a complicated pattern which he forgot.
When he tried to unlock the phone, he wasn't able to do it and now it is locked.
He gets a message saying that there where too many failed attempts to unlock the phone, and the it asks for the gmail user and pwd. This would be great if wi-fi or 3g was active, which is not the case.
I've searched and found some ways to unlock the phone, but I'm stuck because phone isn't rooted usb debugging may or may not be enabled.
Any suggestion on how to workaround this? Or does he owns now a nice brick?
Thanks a lot if anyone can give an idea.
Click to expand...
Click to collapse
I've googled for a hard reset solution and found it: using emergency call just had to do the following:
Remove battery and reinsert it.
Remove memory card
Touch emergency call
Key in *983*987#
dial
Done, problem solved!
Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Follow the steps shown in link below;
https://cyngn.com/support/
http://forums.yuplaygod.com/threads/factory-images-and-flashing-tools-official.2178/
But my phone does not boot into fastboot
Search at play god forum, there are some procedures given there which may solve your prob. http://forums.yuplaygod.com/threads/help-completely-bricked.4641/#post-45794
HI thanks for help but in all above cases they were soft bricked ..i.e their phones booted in fastboot but mine isnt.
Hmmm ... seriously worried situation haan. {Kiya kya tumne}
If you can tell us what exactly you did, may be then we can help.
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Exactly me too flashed miui of f2 without boot.img..Was trying to port...
@ Suhas Is the new phone same as old one or a used one??
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Video Tutorial HOW TO UNBRICK YUREKA
Srry i cant post the youtube link as i am new here
Just go to youtube
Search kanwal deep unbrick yureka
And watch the video
To go in fastbool mode remove battery insert again and press vol up while connecting usb
quakze said:
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Click to expand...
Click to collapse
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
suhas.holla said:
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
Click to expand...
Click to collapse
I have got rom of Huawei C199s (MSM8939), which has many file packed into UPDATE.APP.
I have unpacked it, but the file name and extensions are unknown.
At present I am trying to identify the msimage.mbm and mprg files.
The rom link is http://www.needrom.com/wp-content/uploads/2015/03/C199s-V100R001C92B260-Telecom.zip
Shrihari007 said:
Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Click to expand...
Click to collapse
ask for replace in customer care. as they told they will replace your mobile even after unlocking boot loader, root.
my device also gone hard bricked not get into the fastboot mode..
and no customer care no. to contact not correct > this one 18602122122
any help
thnks..
You guys can take a look at this thread -
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Hit thanks to the creator and me if helped.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
What did you tell the customer support about your phone getting bricked.
I tried calling the support, but they said that they will chargers. 3000 for replacing .
please help
my device got bricked 2 days ago and now there is no fastboot mode and not even the led lights showing up if the device is connected to the pc!! and whats even worse the cc is not picking up the calls
my mobile also hard bricked.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
hi.... my yu yureka also get hard bricked after installing lollipop update from yu.. please tell me the steps you followed to replace your yureka...... please reply fast...
:crying::crying::crying:
issue regarding in functionality in yu yureka after upgrading with lpllipop
dear sir,
my name is anurag. i am using yureka ao 5510 phone after launching official update for phone i upgrade my phone.
i faced sevral problem after updating. the list are provided below.
1) overheating device than normal one while comparing with kitkat.
2) automatically turned off and un- responsive and on screen multicolor circle appeared wih cross over circle, its upto 5-6 hrs after that suddenly screen appeared after turning on mobile and start working.(in this process sevral times i remove battery & reinsert and trying to start it normally).
3) when phone connecting to wi-fi hotspot network (apple tablet over 3g) and i am trying to update apps from playstore its not updated(google play services unfortunately stopped) over wi fi network, but its working good on mobile data.
4) now currently issue in brightnesss control and in setting < storage option < USB computer connection the checkbox option are not apperared & phone not connected to computer(using windows 8.1 ),
please kindly fix this buges...
and provide some patch or system updates as earliar as possible to overcomethis issue.
Hello dear communtiy,
i think i have a quite serious problem: I unlocked the bootloader on my Huawei p8 lite 2017, and it started an obligatory factory reset (because of possible data theft...). Well, after rebooting i find myself without a keyboard to enter my password. I normally use the fingerprint sensor to unlock it, but when you restart it you have to enter a password. There is a numpad for entering the PIN after restart, but just no way of entering anything into the password box. Its a text password with 13 letters (if thats any important). Of course i searched for solutions on the internet and tried almost all of them:
Idea 1: Boot into safe mode: No keyboard in safe mode
Idea 2: Use Huawei erecovery: No keyboard after whats effectively another factory reset (at least thats what i think it is)
Idea 3: Use Google Play on the PC to remotely install a keyboard: Google Play now says a keyboard app is installed, but theres still no keyboard on the phone
Idea 4: Use ADB to somehow do something: USB debugging IS enabled, but my phone is stuck at using USB only to charge
Idea 5: Use a USB keayboard with a micro usb adapter: havent tried that yet, but i am not sure if it will even allow me to enter anything via USB before the phone is unlocked
Idea 6: I have made a Backup of Apps and such via Huawei HiSuite before unlocking the bootloader, but i cant figure out a way to apply it. Maybe it will bring back some form of keyboard when applied.
Im currently doing another Huawei erecovery just because i hope it will do something, but i dont think it will. I am in desperate need of my phone and beg for immediate help. I didnt flash anything onto it, i just unlocked the bootloader with this code you get. I am less than a beginner at screwing with phones. I feel really scared at the moment, since i only had this phone for a couple of weeks. Is there any hope for it?
Again, im begging for it to work,
Kalle
Edit: After in total 3 "resets" theres still personal data on the phone, because i see my old wallpaper on the locked screen.
kallehoeh said:
Hello dear communtiy,
i think i have a quite serious problem: I unlocked the bootloader on my Huawei p8 lite 2017, and it started an obligatory factory reset (because of possible data theft...). Well, after rebooting i find myself without a keyboard to enter my password. I normally use the fingerprint sensor to unlock it, but when you restart it you have to enter a password. There is a numpad for entering the PIN after restart, but just no way of entering anything into the password box. Its a text password with 13 letters (if thats any important). Of course i searched for solutions on the internet and tried almost all of them:
Idea 1: Boot into safe mode: No keyboard in safe mode
Idea 2: Use Huawei erecovery: No keyboard after whats effectively another factory reset (at least thats what i think it is)
Idea 3: Use Google Play on the PC to remotely install a keyboard: Google Play now says a keyboard app is installed, but theres still no keyboard on the phone
Idea 4: Use ADB to somehow do something: USB debugging IS enabled, but my phone is stuck at using USB only to charge
Idea 5: Use a USB keayboard with a micro usb adapter: havent tried that yet, but i am not sure if it will even allow me to enter anything via USB before the phone is unlocked
Idea 6: I have made a Backup of Apps and such via Huawei HiSuite before unlocking the bootloader, but i cant figure out a way to apply it. Maybe it will bring back some form of keyboard when applied.
Im currently doing another Huawei erecovery just because i hope it will do something, but i dont think it will. I am in desperate need of my phone and beg for immediate help. I didnt flash anything onto it, i just unlocked the bootloader with this code you get. I am less than a beginner at screwing with phones. I feel really scared at the moment, since i only had this phone for a couple of weeks. Is there any hope for it?
Again, im begging for it to work,
Kalle
Edit: After in total 3 "resets" theres still personal data on the phone, because i see my old wallpaper on the locked screen.
Click to expand...
Click to collapse
Keyboard Method WORKED with OTG adapter cable!
HELLO TO EVERYONE
So this is my little sister phone and she somehow reset it and now its in google account lock (she does not know the google account anymore)
so far I tried every tutorial to bypass none was sucefully (every tutorial on hardreset,youtube ) I tried for months (its been six months since it got lock)
Today my sister crashed her new phone and she cryes and now I m trying again to unlock this **** google account
can anyone help ?
lately I tried to flash stock room using lg flash tool and fastboot mode but after i press start to flash it says device not detected
whatever I do the lg k8 will not be detected in my pc (i tried several other pcs and all the usb drivers i could fiind)
any help ? I will donate few $ if anyone could help me
I guess what happened is that she factory reseted the phone and frp come up and ask for password of old account? If that is the case than you should search 'how to bypass frp on *device model*' frp should go away if bootloader is unlocked but I guess you can't do that now. However if this mentioned is the case let me know I'm pretty sure I saw couple of tutorials on youtube (can't look for them right now) or you can search it yourself.
Does anyone know where a G950U1UES5DSF3 combination file is? I haven't had any luck finding one, and my phone got FRP locked. In order to use my phone (since I got water in my digitizer ) I need to use USB debugging. Well, the problem is, my phone is stuck on the setup screen and I cannot get passed it without enabling ADB somehow, because I flashed the new stock rom. Please, send help!