Hey guys.
So after just a week of getting this lovely note 4 the phone fell from pocket about a feet or 2 on a ceramic floor and obtained a threadline crack horizontally across the screen. The digitizer is fine and the phone is totally usable,however i am tempted to change the upper glass covering. Iv done some research and couldn't find any detailed process to do that on youtube,though i read somewhere that it's risky to replace just the glass without digitizer. So has anyone gone through this process before? What are the risks? I am planning to buy d glass from aliexpress. ..thanks
So I'm in the same boat as you now...was hoping you were successful and any pointers/tips and what glass did you get? I've taken the glass off and replaced it on a Note 2 so somewhat familiar with the process.
Well i think i have to tell you some bad news guys. Samsung changed the way they produce displays. Back in the day S1-S4 N1-N3 screens came with a frame attatched on em (official parts that is) but now since the S5 and N4 its only the panel itself, touchscreen+Amoled panel glued together and it's like 3mm thick. So you can imagine how difficult it is to replace em seperatly.
I think it's for the best to leave it like this or if you have the money replace the screen completly.
I myself work in a phone/tablet repair shop so if ur from the Netherlands/Belguim you can stop by and it's fixed in ~30 minutes.
For info about prices: http://www.smartphonerepairs.nl/index.php
( don't know if i'm allowd to post this link if not mod's remove plz)
Related
Well I dropped my G1 the other day and it busted the outer glass part. The LCD is fine and it still works perfect. I have looked everywhere,with no luck of finding any parts for them. So I called HTC and they told me 150-250 to replace the glass!! So I was wondering if any one know anyone that does G1 Repair or if anyone know of another phone that has more ava. parts for it with a 3.17" Screen? Any help is greatly appreciated.
Nope, I got AT&T. Was thinking of taking apart the phone and getting the glass measurements and having a custom cut piece of glass.
i believe its a special type of glass
Pretty much stuck buying the glass from HTC on this one ...sorry
PS... it is glass
iphone 3g - Dream lcd
I read that the same screen is in use on the iphone 3g, I doubt its true they probably meant type or sumthin, maybe worth a check...
on the old palm pdas you could replace just the glass if the layer under it isn't damaged, this may no longer be possible with these screens, once the bigtime flashing begins there will be lots of bricks available pretty cheap, maybe you should keep an eye out for somebody who pooched the dev bootloader install then after you convince them they killed it you could buy it maybe for less than the HTC price...
gotta say, that sucks if you were a tmob customer you'd have a few options...
bhang
Hello. Don't you think It's weird that it happened to me too today?
I've never had a broke phone since my Nokia 8210.
Well, some idiot had placed out one of those kinds of plastic bands you use to seal packages with, a black one.
It was pitch dark and I fell as the plastic ring got snared around my feet. Obviously my Jabra bt3030 got pushed against the screen and it got severely cracked.
My insurance company seems to be covering the whole phone except a small sum. This was from the phone part, but I got to see if I can get something from the health insurance as I hit my head and scratched my hand (though not likely but I can always try)
The touch seems to work most of the time, though it reacts slowly but some times It's just dead.
This really sucks.
I'm dead serious when I'm talking that there was no way that the band could be seen when walking.
http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226&view=unread
Some info there.
aad4321 said:
yeah i dont think it is really even "glass" mabye its a type of plexiglass?
Click to expand...
Click to collapse
It is glass. But you can not simply cut a piece of glass to the same dimension as the touchscreen is integrated into the glass cover. So yes you will need to get a htc or aftermarket replacement part.
The interesting thing is that the repair cost you quoted is identical to the cost of the copay if you go with the Asurion device insurance T-mo offers. So device insurance would just be a waste of money at $5 a month if you end up with broken glass.
Looks like I will just have to hold onto it until aftermarket parts come out. I busted mine by letting it slip out of my hand while talking on it....then it took a 6ft fall to eventually land face first on concrete.....I didnt even wanna pick it up cause i new it was messed up and if it wasnt I was gonna call HTC and give them props! I have a ava. upgrade from AT&T Maybe get a Iphone until this one gets fixed then sale iphone on ebay for 5x wuts its worth.
The iphone's screen seems to crack pretty nice as well.
I hope changing the glass on the G1 isn't as frustrating as on the Iphone.
http://www.youtube.com/watch?v=sT7wRXeYsyg
edit:
Not directing this to the message above, just saying.
Cracked screen replacement with compatible HW from third party --when?
I cracked the LCD of my G1 after about three weeks and have noted that neither PPCTechs nor MobileKangaroo have yet acquired a source for the replacement screen.
My understanding is that HTC currently charges what one thread in another forum (http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226) quoted as "a minimum of $238.00" to make this repair.
I expect this repair to be offered soon by third parties for about $150, likely using a non-HTC screen product to replace the damaged one.
Has anyone heard any reports about forthcoming availability of such hardware? If so, then are there any non-HTC services to make the replacement?
yeah im looking for this too...i dropped mine and then proceeded to step on it day two with the phone.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
WooHoo 2 items left as of this copy paste. $80, not bad price.
Shaggy
They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy
This waht i found out
so have the same issue and this is what I found out
so from my understanding there are 2 part to the lcd the outer glass touch sensor and the inner lcd. if the the screen is just cracked and you can see the image the u have to replace both. attached are the part descriptions fromt he g1 service manual. and below is a link of a site that sells them, but for some reason they sell the touch scrren with the outer bezel making it cost more. i called htc to order just the touch sensor glass but they said the dont sell replacements, they just fix em
link
Shagman68 said:
They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy
Click to expand...
Click to collapse
I contacted the seller of the screen and he/she told me that It's only the screen. If the G1 cracks It's the digitizer glass that cracks first. Then if you are unlucky the screen cracks as well. I managed to only crack the digitizer glass. The screen beneath is totally fine. Unfortunately removing the glass from the digitizer plastic was very painful and I managed to wreck the flat cable of the digitizer so that's beyond repair. Now I tried to disassemble the whole phone but I got stuck at removing the housing. First I had problems with the Torx bits. I have some Torx bits in my sets but the lowest I got was T8. I had to buy a cellphone bits set with a lot of different types of bits. It had Torx all the way down to T4. The T5 and T6 was what I needed. There are 4 T5 to remove and one T6. I have inserted the sharp plastic between the housing and the top case and released all hooks but it seems the front and back part of the housing of the phone is dead stuck.
You have to open the whole damn phone from the back to get to the inside of the screen. Why the screen housing uses standard Philips is also beyond me. I have lots of bad experience with standard Philips screws. The heads always get bad after a while of screwing. I have yet to have a problem with Torx.
Hi all
I have been looking at replacing my gf's galaxy s2 screen glass as she has dropped the phone and broken it. I was looking at the screen replacement guide but dont really want to replace the whole AMOLED if i dont have too, Ive got a new gorilla glass piece for the phone and i was wondering what people advise on how best to replace it. I have attached a picture of the phone tools and screen bellow.
I have seen the following thread which seams to have been a similar issue but im sure how the result turned out and i am PMing the user for more info.
http://forum.xda-developers.com/showthread.php?t=1432032
Im have the same problem dude, and i decided to buy a galaxy nexus. I bought to glass replacement on ebay, but i dont know how to change it
I bought this same piece on ebay, but i can t find a tuto to learn how to change only the gorila glass....result: i have to buy the kit with gorila glass, amoled and touch...cost me 650 brl... About 250 usd with service ... Sorry for mt bad english
my friend had the same issue, he cant find the instructions either
I'm not entirely sure if it's true, but someone at ifixit posted that you can't replace the gorilla glass separately because the "glass, screen, and digitizer are laminated together" and that you'll need to purchase "a new screen assembly" if you want to repair cracks.
source:
http://www.ifixit.com/Answers/View/60978/Can+I+change+just+Gorila+Glass+for+my+phone
If it was me and I was truly desperate, I would disassemble the phone first and try using a hot blow gun to heat it up and try to pry it apart. Maybe put a heat sink on the other side where any electronic parts are cool. I highly do not recommend this, but I would feel that if I needed to replace the assembly anyways, what's the big deal if I break it.
Here is the disassembly instructions:
http://forum.xda-developers.com/showthread.php?t=1253969
Can't u just take it to a warranty centre?
Sent from my GT-I9100 using xda premium
Where can i buy it
I have a galaxy s2
i accidentally hit the glass with my ring and now the screens shattered...
the glass is the only thing damaged ..
the amoled display, the touch, and the softkeys function perfectly...
I need to purchase a new glass...
the service centre suggests that i buy the whole panel...
which would be a bit too expensive for me...
if anyone knows where i could buy another glass... please pm me fast!!
http://www.youtube.com/watch?v=QKztg1ra4-0
My Ex droped her Phone and it had Spider Webs all accross. Her Provider send it in to see what it would cost to fix. The Phone also would stop working correctly in the middle of calls.
It turns out buying a new one would have come cheaper atleast thats what came back as a answear.
So I decided to bite the apple and try replacing the Screen myself. My Ex was not happy because she thought with the second Problem it is not worth the effort to fix the Screen and maybe loose everything. My reasoning was that when the Spider Web Screen touches the Digitizer it will react strangely. So I went ahead and searched the web on how to do it. I ordered a Screen for $9 on ebay (free shipping) which came with a couple of Tools. More on those later.
One of the first Problems I found was that all instructions that I found showed the beginning and the end. But in the middle how the phone will look like when the glass is finaly taken off, I was unable to find much Information about it. Also doing it Redneck style without Special liquids and or a heat guns was no where to be found.
I decided to just try it. Disasembly is well documented and easy enough to do on this device. Atleast to the Point where most electronics are removed so that you can apply heat without too much problems. I decided on using a blow dryer to heat up the Display. I layed the Blow Dryer on the Counter turned it on and Held the phone up to it. Thinking if my fingers get too hot chances are it is too hot for the Display too.. Might be a little incaccurate to read the temperature like that but hey it worked. But soon after I started to remove the first pieces of broken glass I ran into Problems.
As per instructions I found, I put a Piece of tape accros the Screen so that the individuall pieces stayed ogether. That did not work at all for me. It just made the individual pieces push against the valuable digitizer below it. My next Problem was that the Tools that came with the replacement glass, especially the Little plastic Tools did not hold up to the Job und the tip was soon useless. I had to Switch to a Raizor blade. A couple of times I sliped and hit the Digitizer. Thinking oh well I guess I Need to get a new one. Luckely on the end it all worked out much better then I would have hoped. The left over glue I rubbed mostly off with my finger which worked out nicely. To clean it completely from ist glue took some time. The black rubber allong the side of the phone allso suffered. You might want to look out that that does not get riped out completely. I had enough left over so that the glass would sit on it good enough luckely.
Take a look at these Pictures and remember it works perfectly again for $9. While it is not for everyone to seperate a Glass from a Digitizer it is acctualy less fragile as you might think. The third Picture Shows you how it looked with all the scuff marks from taking off the glass. You can still see a few little marks on the end but hard to notice and much better then before. I am sure next time I will be more carefull and use the blade from the beginning on.
I got more Pictures and will improve this Thread for others that have to go through it. Feel free to PM me if you have any Questions. A list of other resources will also be included. This is only to explain and Show the bare state.
Reserved for links
Additional Screen Replacement Links:
Do you know if we can replace the metal frame on the side?
My device is bent. I mean. I fell on a rock with my device in my pocket and the rock directly hit the phone. Luckily I had a hsrd case and the device is still alive.
Sent from my GT-I9300 using Tapatalk
supreethms said:
Do you know if we can replace the metal frame on the side?
My device is bent. I mean. I fell on a rock with my device in my pocket and the rock directly hit the phone. Luckily I had a hsrd case and the device is still alive.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
You should be able to find a new Frame for a resonable Price. Now to remove the digitizer from the Frame that is another Story. Not sure if it was the Glue or what Held it in place but I could not figure out how to get that out. luckely the two Buttons at the bottom survived the Screen removal and so I did not hat to take the Digitizer out.
Useful information and explains why repair shops will usually only replace the complete assembly. Read many complaints that those cheap ebay screens are plastic and easily scratched, not genuine gorilla glass replacements?
Sent from my GT-I9300 using Tapatalk
http://www.ebay.co.uk/itm/150998824149?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
I've ordered one of these as mines a bit scuffed and what looks like a small crack in it.
boomboomer said:
Useful information and explains why repair shops will usually only replace the complete assembly. Read many complaints that those cheap ebay screens are plastic and easily scratched, not genuine gorilla glass replacements?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
It is definetly cheaper then the original but if you have done it once. Chances are You will be able to do it again much easier. So if the $9 Glass only holds for example a Year. You can just replace it again. Or spend a little more for a original replacement glass.
Now I should Point out if the rubber seal around it gets damaged in the process and if the 3M Tape that should come with the Screen is placed wrong it will Impact the sensitivity of the sreen touches. I guess I did it right because my Ex is happy how it performs and that is saying allot.
madmackem said:
http://www.ebay.co.uk/itm/150998824149?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
I've ordered one of these as mines a bit scuffed and what looks like a small crack in it.
Click to expand...
Click to collapse
If you get down to removing the digitizer from the Frame take a couple of Pictures and post them here.
http://www.myfixguide.com/manual/samsung-galaxy-s6-teardown/
Doesn't quite show if the Modem is a separate chip or onboard the 7420.
my 2 cents
Was just about to post this. Thanks!
The battery seems cumbersome to replace. I hate heating things up and removing the glass in fear of cracking it. However, once past that, it looks pretty standard. I'm glad there's no more glue underneath that all.
Being careful, it can be "easy" to change the battery
There is a YouTube video about The Galaxy S6 teardown
https://www.youtube.com/watch?v=_rXLJ2uJWnw&ab_channel=ETradeSupply
they also uploaded to ifixit
https://www.ifixit.com/Teardown/Galaxy+S6+Teardown/38636
Removed some teardown pictures because risk of being reported to sammy.
Exploded
Parts list for SM-G920I
I wish it was a little easier to repair, ala the Nexus 4, which was rather simple to take apart. But really, anyone who has taken apart phones before shouldn't find it too difficult to repair this device. But it looks like most everything is soldered to the motherboard. What will happen if the usb port breaks?
Hi. I just broke my S6 display, just the protection glass ,the touch is working flawlessly even where the display is cracked. I was wondering what do you suggest, to change only the glass (Oca glue /gel ?) or to replace the whole display meaning glass and touch? Please help guys. Later today I will post a picture with the display. Thank you.
demoskino said:
Hi. I just broke my S6 display, just the protection glass ,the touch is working flawlessly even where the display is cracked. I was wondering what do you suggest, to change only the glass (Oca glue /gel ?) or to replace the whole display meaning glass and touch? Please help guys. Later today I will post a picture with the display. Thank you.
Click to expand...
Click to collapse
I only had mine for 5 days, dropped it, and cracked the glass.... a week later, dropped it again, and cracked it even more! I can't believe how slippery the G6 is. Anyhow, I ordered a good case the same day I got the phone, but it's stuck at friggen customs for over a month now... Soon as I get it, going to get er fixed. It's $210 locally rite now to get the glass replaced, or $150 for an insurance replacement. Regardless, going to stick with the messed up screen til I get the case, still works great.
Hi. I found to replace the glass and touch together with 150 . Replacing just the screen I think it's cheaper but I didn't hear good things about this procedure (high possibility to crack the touch or the gluing of the touch and glass it's very hard to get like new). Where are you from? http://www.amazon.co.uk/gp/aw/d/B00...y+s6+parts&dpPl=1&dpID=51nFR7qIK9L&ref=plSrch
I bought a Samsung Galaxy S6. The other day, I happened to break the front glass. The LCD is still fine and the phone works, but the glass is all cracked and a little sharp. So I got a Samsung Galaxy S6 replacement and then followed the video guide to fix it. Now the phone just like a brand new phone.
Hello all. I'm almost going to buy this with a cracked screen. I went through youtube and saw videos where people ruin the lcd while trying to fix the glass only repair. Is it always this hard? Is there a sure way to replace the glass only? Or one would need to replace the whole lcd (which is really expensive)
Thank you
jazzdglass said:
Hello all. I'm almost going to buy this with a cracked screen. I went through youtube and saw videos where people ruin the lcd while trying to fix the glass only repair. Is it always this hard? Is there a sure way to replace the glass only? Or one would need to replace the whole lcd (which is really expensive)
Thank you
Click to expand...
Click to collapse
Better to just replace the whole thing I just got mine replaced almost paid about 200 dollars the screen and the lcd is glued together I asked my cell phone repair man and he should me the screen and why it usually doesn't work out its because they are literally glued very very closely together trust it's not worth just getting the screen replaced because u will most likely have touchscreen issues yellowing issues etc ...... If u don't plan on upgrading your phone anytime soon I would say go for it I just did it because I plan on using my note 4 a little longer we have a lot of good development and marshmallow is near mate soon. ...
Yeah, you are better off replacing the entire front panel of the Note 4 or any Samsung flagship device. As the screen and display on Samsung flagships are all glued to together so replacing just the screen is a very hard job.