Hello everyone! This is my first thread here. I hope you can help me and that maybe in the future I can also help somebody here. I tell you my problem and I hope it's not to confusing.
I have a problem with my gionee elife e7 (32GB). The problem occured without a obvious reason. My girlfriend was using the phone which was running android 4.4 Kitkat (stock). So one day it just stopped booting. There is just a black screen and I can't enter recovery mode or factory mode by pressing buttons on the device. At least I tried unsuccessfully. Anyway the device vibrates If I hold the power button and also it is recognized by my PC. This is why I am hoping to be able to restore the smartphone again by flashing a new rom.
The device is recognized as "gionee android composite adb interface". I tried to flash the ROM with the gionee download tool but unfortunately the tool says "open COM ports fails". So I tried to deinstall all COM-ports on my PC without this problem going away. Sometimes - I don't know why - The tool doesn't show this error. But then the tool doesn't find my device when I plug it in.
Also I tried to get access to the Smartphone via ADB or Fastboot without luck. The PC didn't recognize the device.
I tried everything with Windows 8.1, Windows 7 and Windows XP via Virtualbox.
All in all I have no idea left about how to repair the smartphone. I hope some of you can help me with this. Does anybody know how I can access the smartphone again and reinstall the Android System on it?
Thank you very much
try pressing the power plus volume + and volume - simultaneously, release only the power when the phone vibrates and wait bout 10 secs pressing the volume keys. Then release them and plug the phone to the PC and check if the QLoader driver is loaded. If so try flashing in Emergency Mode.
Let me know how it went...
tried
Wrong description!
Thank you for your help! The result was that the device vibrates constantly every 3 sconds after I stop to press the powerbutton und keep pressing the Volume + and - buttons together. As soon as I release them it stops vibrating. In the Device manager it still shows the "gionee android composite adb interface".
I tried to do the same with the device plugged into a USB. What I then recognized was that the Status-LED was blinking red every second . After 10 seconds of pressing the buttons there was a little break in the blinking (like the device would try to restart or something). As I didn't get any changes in the device-manager I disconnected it. After that it stopped to blink and doensn't blink anymore if I do the exact same thing again. it only vibrates now.
I'm sorry that this might be a tough case! Anyway I am thankfull for your advice!
But do you have access to the via ADB?
RSGI said:
But do you have access to the via ADB?
Click to expand...
Click to collapse
If you have ADB access you can try:
Code:
adb shell
su
setprop sys.usb.config diag,adb
I'm not familiar with ADB but I tried to get access to it via Minimal ADB and Fastboot. Even though the smartphone is recognized as ADB Composite Device in the device manager, it don't get any connection (as shown in the screenshot)
Related
I own an LG G2, i recently got this phone yesterday from a person on craiglist. Don't worry i didn't pay him i gave him my older phone i dont use anymore. SO This phone is practically stuck in Firmware Update (As i read that post) , i spent about a day and half figuring it out and what happens is that.
I CAN get into recovery its TWRP v2.7.0.0 by Turning off the phone first and then Holding Vol UP, Power, Vol Down at the same time until the LG Logo comes up and then i am still holding them down, and it says Recovery Mode please wait and bam TWRP.
But heres the problem i can't mount my OTG and i can't ADB Sideload. So what do i do from here?? this guy rooted this phone and soft bricked it i think? and he wiped the phone but i also did when i had the chance and wiped it completly via recovery.
The only way i got into "Download Mode" / "Firmware Update" was to take the back cover off and unscrew a few screws on the side and unclip the battery for a few seconds and then plugged it back in and then I held the VOl UP button and plugged my USB into the phone and the other end is in my PC. My phone says "Download Mode please wait" and then prompted with the Firmware Update screen. BUT my pc doesnt detect the phone whatso ever and i've already installed drivers and etc from this forum ( http://forum.xda-developers.com/showthread.php?t=2432476 ) its the 2015 method that i downloaded.
so what do i have to do, i havent tried using different usb cables, the port seems fine to be plugged in since in TWRP it says 84+ so i meant its charging right? help me out guys idk what else to do or flash or anything.
IAmTechFreq said:
I own an LG G2, i recently got this phone yesterday from a person on craiglist. Don't worry i didn't pay him i gave him my older phone i dont use anymore. SO This phone is practically stuck in Firmware Update (As i read that post) , i spent about a day and half figuring it out and what happens is that.
I CAN get into recovery its TWRP v2.7.0.0 by Turning off the phone first and then Holding Vol UP, Power, Vol Down at the same time until the LG Logo comes up and then i am still holding them down, and it says Recovery Mode please wait and bam TWRP.
But heres the problem i can't mount my OTG and i can't ADB Sideload. So what do i do from here?? this guy rooted this phone and soft bricked it i think? and he wiped the phone but i also did when i had the chance and wiped it completly via recovery.
The only way i got into "Download Mode" / "Firmware Update" was to take the back cover off and unscrew a few screws on the side and unclip the battery for a few seconds and then plugged it back in and then I held the VOl UP button and plugged my USB into the phone and the other end is in my PC. My phone says "Download Mode please wait" and then prompted with the Firmware Update screen. BUT my pc doesnt detect the phone whatso ever and i've already installed drivers and etc from this forum ( http://forum.xda-developers.com/showthread.php?t=2432476 ) its the 2015 method that i downloaded.
so what do i have to do, i havent tried using different usb cables, the port seems fine to be plugged in since in TWRP it says 84+ so i meant its charging right? help me out guys idk what else to do or flash or anything.
Click to expand...
Click to collapse
I think the methods leave out that you need to change your phone to com port 41 on device manager > ports in order to be detected. Then you need to unplug it and reconnect to computer when the program shows waiting for device, with the phone in download mode already.
Also, to get to recovery you hold vol down and power, when the LG logo comes up release power and hold it again until the reset screen comes up.
To get to download mode you turn the phone off then hold up while plugging the USB cord in with it connected to pc... This launches download mode.
Sent from my LG-VS980 using XDA Free mobile app
Yoinx said:
I think the methods leave out that you need to change your phone to com port 41 on device manager > ports in order to be detected. Then you need to unplug it and reconnect to computer when the program shows waiting for device, with the phone in download mode already.
Also, to get to recovery you hold vol down and power, when the LG logo comes up release power and hold it again until the reset screen comes up.
To get to download mode you turn the phone off then hold up while plugging the USB cord in with it connected to pc... This launches download mode.
Sent from my LG-VS980 using XDA Free mobile app
Click to expand...
Click to collapse
Well you see man , I cant change anything in Device Manager since my phone isn't being detected. It didn't install drivers fully fully since my phone isnt recognized. Even in TWRP or "Download Mode/ Firmware Update" Nothing happens no drivers installing or anything even but it does boot it up to that point....and its just normal boot up i see the LG logo and my led goes from green to blueish in a smooth transition and it doesnt stop until i turn it off. The method i got into recovery is holding all those buttons down its not a problem for me to get into it. I also have another problem it doesn't seem to want to mount my usb otg by samsung.
what do i do
So i tried the otg route but I can't mount it. I have everything connected and once I go into recovery to mount usb-otg, nothing happens.
I just need some way to get a ROM.zip in my phone
Computer does not recognize my phone.
Stuck at LG logo unless I enter recovery.
Sideload doesnt work.
OTG doesnt work.
I've tried at least 4 different guides with no luck.
Why don't you manually install drivers from online?
ive tried
tzzeri said:
Why don't you manually install drivers from online?
Click to expand...
Click to collapse
ive tried that already and it doesnt list anything from the LG folder.
I realized the phone will say start the adb sideload feature. so, when i put the "abd sideload file.zip" command on my pc i just wait a few minutes and it says daemon not running on port 5037 and then start successfuly and then error :device not found.
it can seem to reognize my device wether its in recovery, or download mode or fastboot mode.
Try again in other pc that has never been conected to an LG Phone before. It can perfectly be a conflict with drivers installed in the OS.
I've tried man
AFter i cleaned the usb port in one of the chats or forums, i waited a day ovbiously without turning on the phone and cleaned the usb port with alchohal and a q tip and i plugged my phone into my computer and my PC detected something but it only says "Unknown Device" everytime no matter what pc i use it says that. nothing else. but before that none of my pcs would detect theirs a phone plugged in at all.
IAmTechFreq said:
AFter i cleaned the usb port in one of the chats or forums, i waited a day ovbiously without turning on the phone and cleaned the usb port with alchohal and a q tip and i plugged my phone into my computer and my PC detected something but it only says "Unknown Device" everytime no matter what pc i use it says that. nothing else. but before that none of my pcs would detect theirs a phone plugged in at all.
Click to expand...
Click to collapse
Might be a problem with the cord
Sent from my Motorola DynaTAC using XDA Free mobile app
tzzeri said:
Might be a problem with the cord
Sent from my Motorola DynaTAC using XDA Free mobile app
Click to expand...
Click to collapse
No there is no problem with your USB cord or port. You need to do following steps.
http://forum.xda-developers.com/showthread.php?t=2432476
https://www.youtube.com/watch?feature=youtu.be&v=g01Pa7cgdSM&app=desktop
Please let me know if you succeed.
All credit goes to #bender_007
I tried to downgrade from Kitkat to JB via flashtool this morning which I often successfully flashed with the same method. But while the flashing is going on and almost finish the flashing (system.img, userdata.img, etc. are already flashed), there seems to be some problem and popped out that the flashing is fail. And then the device does not boot up. While I tried to reconnect the device to PC, the PC cannot recognize the device as shown in the picture. Unable to process any further method. Does anyone in this forum knows how to recover the bricked device like this?
The phone starts? In a black screen?
If the PC detects it like that the phone has some energy and connection...
Does anything apears on the screen? Can you go to the Recovery Mod?
Have you tried to force the driver installation on that USB item that appears on device manager?
Do you have access via ADB or fastboot?
Did you nottest in what partition did the error message appeared?
Please provide some answers to these questions so i can try to help you...
RSGI_PT said:
The phone starts? In a black screen?
If the PC detects it like that the phone has some energy and connection...
9Does anything apears on the screen? Can you go to the Recovery Mod?
Have you tried to force the driver installation on that USB item that appears on device manager?
Do you have access via ADB or fastboot?
Did you nottest in what partition did the error message appeared?
Please provide some answers to these questions so i can try to help you...
Click to expand...
Click to collapse
Nothing on the screen. Not able to boot into recovery or adb is not working. The phone is just death. But, when I insert the usb cable, the pc can detect it. I even approach the Customer Care here in Aizawl, but they cannot fixed. Even when I followed the instruction as per one xda member posted here, The qualcom hs - 9006/8 is displayed on the device manager and when I tried to flashed it with emergency mode, the result always the same. FAILS
hruaiapunte said:
Nothing on the screen. Not able to boot into recovery or adb is not working. The phone is just death. But, when I insert the usb cable, the pc can detect it. I even approach the Customer Care here in Aizawl, but they cannot fixed. Even when I followed the instruction as per one xda member posted here, The qualcom hs - 9006/8 is displayed on the device manager and when I tried to flashed it with emergency mode, the result always the same. FAILS
Click to expand...
Click to collapse
Try this:
- Start GNQC with the phone disconnected
- Connect the Phone and see GNQC recognizes the QLoader
- If so, press power button until the phone vibrates
- Wait for the GNQC recognizes again the QLoader and press Download on Emergency Mode
Use this KIKAT ROM: https://docs.google.com/uc?id=0B8H5JoBDpTnJMGE2QTJPR0FWX0E
This worked for me, i had the phone completly died, not even recognized by the PC, waited a day and tried again.
Once the QLoader is recognized your good to go!!
I'm having another problem after that, now theres no GSM/3G signals....
I need a EFS backup with the TWRP recovery.... No one seems to have
RSGI_PT said:
Try this:
- Start GNQC with the phone disconnected
- Connect the Phone and see GNQC recognizes the QLoader
- If so, press power button until the phone vibrates
- Wait for the GNQC recognizes again the QLoader and press Download on Emergency Mode
Use this KIKAT ROM: https://docs.google.com/uc?id=0B8H5JoBDpTnJMGE2QTJPR0FWX0E
This worked for me, i had the phone completly died, not even recognized by the PC, waited a day and tried again.
Once the QLoader is recognized your good to go!!
I'm having another problem after that, now theres no GSM/3G signals....
I need a EFS backup with the TWRP recovery.... No one seems to have
Click to expand...
Click to collapse
my e7 died. you are stuck using flash tools. is not even recognized by most PCs. maybe it drain? I can do? help me
I have the same problem, screen is completely black after trying to instal newer official rom. When I connect it to PC, it detects "hid device". I tried power + volume buttons combinations, but nothing changes. Sometimes notification led turn red for a few seconds but nothing else. And once win xp randomly detected phone as that "q..." thing, but it doesn't anymore. What else can I do?
Can anyone help me? I tried everything and my phone is still hardbricked.
Hello guys
Today i received my E7 and i tried to update via the tool unfortunately something went wrong and now i cant open it nor fastboot or recovery. Some hours ago i tried to connect via usb and appeared on the GNQC but later it showed as unknow device. It was my first day with the phone. Right when i connect /disconnect the usb i can hear the sound but i cant do anything. Is it dead or i can revive it somehow?
It was the first day:crying::crying:
Reinstall the drivesbob the PC, press 30 secs on the power button than connect the phone to the PC. If appears a QLoader port use emergency download on gnqc 1.6.9.0
RSGI said:
Reinstall the drivesbob the PC, press 30 secs on the power button than connect the phone to the PC. If appears a QLoader port use emergency download on gnqc 1.6.9.0
Click to expand...
Click to collapse
PLZ HELP i try to update using this http://www.needrom.com/download/gionee-elife-e7-32g/comment-page-2/#comment-165291 but now my phone doest enen boot or fast boot or anything.. in the proces it said "firehose ping phone fail" and stopped updating since then my phone isnt booting or anything and my pc dont recognize it any more.. plz help
---------- Post added at 15:32 ---------- Previous post was at 15:29 ----------
RSGI_PT said:
The phone starts? In a black screen?
If the PC detects it like that the phone has some energy and connection...
Does anything apears on the screen? Can you go to the Recovery Mod?
Have you tried to force the driver installation on that USB item that appears on device manager?
Do you have access via ADB or fastboot?
Did you nottest in what partition did the error message appeared?
Please provide some answers to these questions so i can try to help you...
Click to expand...
Click to collapse
plz help...
PLZ HELP i try to update using this http://www.needrom.com/download/gion...comment-165291 but now my phone doest enen boot or fast boot or anything.. in the proces it said "firehose ping phone fail" and stopped updating since then my phone isnt booting or anything and my pc dont recognize it any more.. plz help
thianpa he thil hi i solve thei toh m
Hi all!
First of all I would like to give small heads up - I've been searching XDA and web for two days and ended with no working solution.
Situation:
Suddenly my Nexus 7 (2012) just died. No charging signs, nothing. So i tried Google described and random hardware resets using buttons with no luck.
I ended with situation:
device is not turning on - no screen flickering, not even small amount of pixel light visible,
ADB - no devices found,
fastboot - no diveces found,
nvflash - only my GeForce PC card found
when I connect device to PC I have to hold power button for ~10sec and there I hear "boing" (USB dev. disconnected), "boing" (USB device connected) sounds.
device is visible as APX device with "!" mark
I've tried:
hardware reset by pressing: power button, power+volume's buttons for different amount of time,
taking back and disconnecting battery,
using different software to discover device,
editing driver .inf file to recognize my device as ADB device. It did but still no visibility via ADB or fastboot (URL: http://blog.dantup.com/2012/10/fixing-adb-device-not-found-with-nexus-7-in-recovery-mode/),
read and tried to use things from: http://forum.xda-developers.com/nexus-7-2013/general/rd-thread-trying-to-solve-ota-brick-t3117495.
No result at all...
One more - when I unplug and then plug in battery while having back taken I can hear sound that something is "running".
Please help!
@kepisty89 You can check here. Install the driver and check your device is detecting or not, actually you've a fried bootloader.
Tahnk you @DutchMan_1990, I tried this and now ended with my device recognized as "Asus Transformer Prime APX Interface". Nothing else happened.
Any ideas?
kepisty89 said:
Tahnk you @DutchMan_1990, I tried this and now ended with my device recognized as "Asus Transformer Prime APX Interface". Nothing else happened.
Any ideas?
Click to expand...
Click to collapse
Hi, kepisty89...
Unfortunately, APX mode is generally never good news .
It usually indicates that the Nexus 7's bootloader has either become corrupted or has been erased, and effectively hardbricking the device.
-----
See here, for a post I wrote for another XDA member with similar issues to yours, back in December 2014, where I elaborate further on this problem.
-----
I suspect your Nexus 7 will require a motherboard replacement .
Rgrds,
Ged.
I have similar issue, but mine I can get to bootloader but that's it, if I try to power it on all I get is the Google and unlock padlock, can't get to recovery, but my device is seen via fastboot ADB Wugfresh NRT, but as soon as I try to write to it ie flash files or try to restore device, ADB locks up, and when it says rebooting device my nexus tries to reboot but I get a black screen and Wugfresh says waiting for device, I have to force reboot bootloader hold power button vol down for NRT to see it again in fastboot. I can also boot tempery recovery via NRT but when I select mount it pops up on PC but I can't copy anything to it, also it says I have no OS installed.
Sent from my Nexus 6 using Tapatalk
hi!
So i've messed up my phone. I was formatting my data and as twrp was stuck for 15 minutes at done i forced rebooted my phone. after that i can only boot into twrp (not even edl mode) no matter which button combos i use. But the thing is, twrp is stuck at the loading screen. the phone is recognized in adb but it is recognized in recovery and trying to use the command "adb reboot edl" doesn't work, nothing happens.
What can i do? I was thinking about using some commands where the phone is recognized in adb as in recovery but i have no idea what to do.
senny22 said:
hi!
So i've messed up my phone. I was formatting my data and as twrp was stuck for 15 minutes at done i forced rebooted my phone. after that i can only boot into twrp (not even edl mode) no matter which button combos i use. But the thing is, twrp is stuck at the loading screen. the phone is recognized in adb but it is recognized in recovery and trying to use the command "adb reboot edl" doesn't work, nothing happens.
What can i do? I was thinking about using some commands where the phone is recognized in adb as in recovery but i have no idea what to do.
Click to expand...
Click to collapse
both volume buttons + plug the wire doesn't work?
senny22 said:
hi!
So i've messed up my phone. I was formatting my data and as twrp was stuck for 15 minutes at done i forced rebooted my phone. after that i can only boot into twrp (not even edl mode) no matter which button combos i use. But the thing is, twrp is stuck at the loading screen. the phone is recognized in adb but it is recognized in recovery and trying to use the command "adb reboot edl" doesn't work, nothing happens.
What can i do? I was thinking about using some commands where the phone is recognized in adb as in recovery but i have no idea what to do.
Click to expand...
Click to collapse
I have exactly the same problem, could you solve it? I'm very worried about my phone
ale0796 said:
I have exactly the same problem, could you solve it? I'm very worried about my phone
Click to expand...
Click to collapse
Hi! When I held both volume buttons and the power I dunno in what mode I was in but while my phone was on this mode and plugged in to my PC it was recognized in device manager as ADB something (I don't remember). I was shocked when I saw that my PC would recognize the phone because no LEDs was lit (not even the red LED you get in edl mode) and also my phone would start instantly with pressing the power button, (in edl it takes about 10 to restart the phone). Anyway so I tried zadig, Qualcomm drivers and even a different pc but it would still connect as ADB something. Lastly I disabled automatic driver updates in windows and installed the qualcomm axon 7 firmware driver (Google it). After that I rebooted and my phone was now recognized as "qualcomm hs loader" something and so I could use Miflash to flash a stock firmware. Miflash would work right away though but after maybe 15 tries and lots of reboots it then worked for some reason I don't know. After that I had a stock recovery back and it was all going smooth again from there.
senny22 said:
Hi! When I held both volume buttons and the power I dunno in what mode I was in but while my phone was on this mode and plugged in to my PC it was recognized in device manager as ADB something (I don't remember). I was shocked when I saw that my PC would recognize the phone because no LEDs was lit (not even the red LED you get in edl mode) and also my phone would start instantly with pressing the power button, (in edl it takes about 10 to restart the phone). Anyway so I tried zadig, Qualcomm drivers and even a different pc but it would still connect as ADB something. Lastly I disabled automatic driver updates in windows and installed the qualcomm axon 7 firmware driver (Google it). After that I rebooted and my phone was now recognized as "qualcomm hs loader" something and so I could use Miflash to flash a stock firmware. Miflash would work right away though but after maybe 15 tries and lots of reboots it then worked for some reason I don't know. After that I had a stock recovery back and it was all going smooth again from there.
Click to expand...
Click to collapse
THANK YOU SO MUCH, after 30 more attempts, I get the xiaomi miflash flashed my device, the last thing I tried was to disconnect the phone, keep the power button for 10 seconds and then connect it. The device was recognized as "Qualcomm HS-USB QDLoader 9008" download this rom https://build.nethunter.com/misc/axon7/A2017U_B15-NEW_FULL_EDL.zip unzip it and select the folder with miflash and flash it. Miflash did not send me the "can not get hello package" message anymore. I really appreciate it a lot, without your message I would probably have kept my phone in a box and forget it. I hope all people can read this comment and solve this problem. THANK YOU
ale0796 said:
THANK YOU SO MUCH, after 30 more attempts, I get the xiaomi miflash flashed my device, the last thing I tried was to disconnect the phone, keep the power button for 10 seconds and then connect it. The device was recognized as "Qualcomm HS-USB QDLoader 9008" download this rom https://build.nethunter.com/misc/axon7/A2017U_B15-NEW_FULL_EDL.zip unzip it and select the folder with miflash and flash it. Miflash did not send me the "can not get hello package" message anymore. I really appreciate it a lot, without your message I would probably have kept my phone in a box and forget it. I hope all people can read this comment and solve this problem. THANK YOU
Click to expand...
Click to collapse
Really glad I could help
Hi, Just got the amazon ads Nokia TA-1025, I'm trying to get ADB working but even if phone detect the USB connection it will never ask for grant permission for PC thru ADB, deleveloper options is active as well as USB debug, tried using universal ADB drivers, included drivers and nokia 3 drivers with no luck, what I want to do is try to flash TA-1021 software or at least get into fastboot, thank you in advance for any advise!
SiulX86 said:
Hi, Just got the amazon ads Nokia TA-1025, I'm trying to get ADB working but even if phone detect the USB connection it will never ask for grant permission for PC thru ADB, deleveloper options is active as well as USB debug, tried using universal ADB drivers, included drivers and nokia 3 drivers with no luck, what I want to do is try to flash TA-1021 software or at least get into fastboot, thank you in advance for any advise!
Click to expand...
Click to collapse
For fastboot
1. Switch of your device
2. Connect your charger either via power or computer, your choice
3. Don't start your device just let it show that the phone is charging in power off mode
4. When you saw the bettery animation of power off charging, press and hold power button+volume plus button together and release only power button when you see android boot logo
5. Keep holding your volume plus button until you see recovery menu
6. In recovery menu you will find reboot to bootloader, select the option and hit power button to get into bootloader
7. Now you can install Mena firmware from Rom thread post of the nokia 6.
Enjoy
Hit thanks button if you find this helpful
Happy flashing
These have locked bootloaders. You are going to brick your phone. Geesh man. Read more before you try stuff like this .