So, Here is YUN OS 3.0.3 For Spice MI509.
Faster and smoother.
Rom Features:
1. Fast and smooth.
2. Have much better 3g speed.
3. Much better camera quality.
4. Online theme support. works flawlessly
5. Added COOL UI roms Music Player.
6. Clear and louder sound.
7. full Yun OS UI.
8. Virtual phone feature.
9. And many more, xplore your self.
DOWNLOADS
YUNOS 3.0.3 SPICE
Gapps
HOW TO FLASH:
1. download above files.
2. reboot to recovery.
3. now wipe data and factory reset.
4. now do format system.
5. now install from sdcard and select yun os 3.0.3 zip file.
6. wait till process completes. and then reboot.
7. when phone reboots, now again reboot to recovery and flash gapps.
8. And gapps start to work on this rom.
BUGS>
Some ui limitations and thus some apps will give Force close like cricbuzz.
HIT THANKS ...
Related
SORRY THE THREAD IS CLOSED......... No more support for this rom, you can try my other roms
BLU Studio Selfie
ATOS - Cm 12.1 based lollipop rom
By Prajwal(Myself)[/B]
Description:
ATOS is the cyanogenmod 12.1 based custom rom that is faster and efficient .... I have added some build.prop tweaks to make it more beautiful and faster ......
Device name : BLU Studio Selfie By Prajwal
Kernel : 3.10.72
Android version : 5.1
Features :
1. Customizable fonts
2. Themer engine
3. Bugless (Everything working fine)
4. Faster and efficient
5. Build.prop tweaks
Whats working:
1.Music player
2.Camera
3.Video recording
4.Wifi
5.Bluetooth
6.GPS
7.Mobile networks
8.Cellular data working fine
Not working:
I have not found anything not working ....
Download link (Rom)
https://drive.google.com/drive/folders/1Wds-Lkbeef_gqy231Opr2ql_su_lobaF?usp=sharing
How to flash:
1.Reboot to twrp
2. Do a full backup of your phone .... I am not responsible for bricked device
3.Do a clean wipe (system , cache , dalvix cache , internal ,data)
4.Install the rom file
5.Then install Gapps (arm- 5.1 - any as your wish)
(To install gapps , its the same just dont wipe anything ....
But after the completion of installing gapps and rom then wipe dalvix cache and only start the rom)
6. Reboot
Now you will be running ATOS rom on your device
Use pitchblack dark red theme from play store ...... it will look the best
Dont forget to leave a comment ...... Thanks
Good Luck !!!!!! :good::good:
1
i installed your rom but when i reboot it, it only blinks and doesnt open?
and zip signature verification failed
Hi, the link is not working anymore. Can you fix it please?
Lineage OS is a OS which has been replaced by the cyanogen OS but it's almost same like cyanogen except the boot animation & the Easter egg game of lineage OS itself. For now they only have nightly & experimental builds available for every device but they are pretty stable & smooth.
For my device Redmi Note 3 Pro I only face the camera bug otherwise the Rom is fully stable.
Steps:-
So first go to the lineage OS site and search for your device and download the Rom file.
So after downloading the ROM, Place the ROM file in your phones internal storage or sd card if you downloaded the file in PC.
Then boot into twrp recovery.
For most of the device you can boot into twrp recovery by pressing the Volume up + power button together But if this doesn't work for you than Google it for your device
Then in twrp go to wipe, advance wipe And select all the partitions except micro SD card & internal storage And then swipe to wipe.
Then go to install and browse to the ROM file And select it.
Then click on add more zip and Then select the gapps file And Then swipe to confirm flash.
Then reboot.
**volte sign will not show but volte is fully working.
Video - https://goo.gl/3b8Knl
Lineage OS- https://goo.gl/UH5RRT
The ROM is pretty much same as the cyanogenmod.
Actually it's exactly same except the boot animation & the Easter egg of lineage os itself.
So that's how you can install lineage os on your Android device. Hope you like it!
Hi guys, I have been testing the GSI AOSP ROM (from @phhusson) on our CC9e and works well most of the functions (maybe is not for daily driver but you can test and decide), except for :
-the FP sensor doesn't work
- the camera preinstalled not adjust to interface and the quality is bad (install gcam instead)
- Maybe other things
For those who want to test the AOSP Q sensation try the next steps:
You need a unlocked bootloader a TWRP working on your device and maybe some knowledge on how TWRP works.
1- Install the latest android 10 xioami.eu rom for cc9e (in order to get the vendor of android 10).
2- Download the latest AOSP 10 gsi system image (thanks to @phhusson ), extract it to get the .img file, copy it to internal memory or a otg device, then back to twrp.
2- Enter to wipe option on twrp, and slide to wipe data and cache partition, then go to install option and flash the .img file in the system partition.
3- Once it is installed just reboot to system and test the sensation of an AOSP rom
fer15 said:
Hi guys, I have been testing the GSI AOSP ROM (from @phhusson) on our CC9e and works well most of the functions (maybe is not for daily driver but you can test and decide), except for :
-the FP sensor doesn't work
- the camera preinstalled not adjust to interface and the quality is bad (install gcam instead)
- Maybe other things
For those who want to test the AOSP Q sensation try the next steps:
You need a unlocked bootloader a TWRP working on your device and maybe some knowledge on how TWRP works.
1- Install the latest android 10 xioami.eu rom for cc9e (in order to get the vendor of android 10).
2- Download the latest AOSP 10 gsi system image (thanks to @phhusson ), extract it to get the .img file, copy it to internal memory or a otg device, then back to twrp.
2- Enter to wipe option on twrp, and slide to wipe data and cache partition, then go to install option and flash the .img file in the system partition.
3- Once it is installed just reboot to system and test the sensation of an AOSP rom
Click to expand...
Click to collapse
Very nice.Thank you much more.
NO GOOGLE OMNI
So i wanted to make a rom but since im 12 im dumb so this is the best i could make. Its just omni 6 with some apps. It was annoying to install all my apps back again after flashing and i was bored. If there are any bugs go here because i didnt even make the rom itself.
(https://forum.xda-developers.com/galaxy-tab-2/galaxy-tab-2-unified/rom-omnirom-t3405125)
====================================================================================================
Here is the original rom
(https://androidfilehost.com/?w=files&flid=52727&sort_by=date&sort_dir=DESC)
====================================================================================================
Your warranty is gone if you flash this. Even though it probably already ended.
Don't do this if you don't know what you are doing.
If you brick your tab it's not my fault
====================================================================================================
This ROM is meant to be used without GApps (Google Services) If you want to install gapps download the original rom and flash them
====================================================================================================
Download the zip
Download Magisk for root (Optional)
Boot into you recovery (TWRP,CWM)
Wipe Cache, Dalvik, Data, System (I wipe internal too because all my roms are on my SD card)
Flash the ROM
Flash Magisk
Reboot
Done (First boot will be fast but it will have to optimize apps so it will take 2 minutes max to boot completly)
====================================================================================================
Apps included:
NewPipe (Youtube)
Youtube Vanced (Youtube)
Sony Music Player (Music)
Trebuchet (CyaogenMod launcher)
Aurora Store(App Store)
GBoard (Keyboard)
Wallpapers
====================================================================================================
Downloads
ROM: http://www.mediafire.com/file/se97cu0m20l7d9z/NG-Omni_6.0.1.zip/file
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
====================================================================================================
cool
Mithil17 said:
cool
Click to expand...
Click to collapse
Thanks
• Introduction
Samsung Galaxy J4 is a phone based on Exynos 7570 with 720x1280 resolution, ARM Mali T720 GPU, Cortex A53 Quad-core CPU. This phone released in 2018 with Android 8 shipped out-of-box, and available OS update until Android 10.
But, since it already 2 years (in 2020) from launched, this phone only have developer that can be counted on one hand. There is no custom rom for this device, and custom kernel only 1 or 2 or 3 (I'm building this kernel right now, but I'll release it when I have enough post count )
The good news is, this device is Treble supported! So we can install most of available GSI, even without any vendor or kernel required.
• Stock ROM vs GSI
What's the different? In my opinion, very much! As we know, GSI is based on AOSP, which is pure android, and almost no bloatware. And, for other GSI, like Havoc or Lineage or any GSI like that, have cool theme and animation. Why not giving a try?
• Warning
Although this is cool, but, remember this is GSI, bugs are widely open. Bugs I found are in below.
Second thing, your warranty is void! This is sure, you unlock bootloader, Install TWRP, even install GSI, that surely will trip knox and voiding warranty.
And, last one, backup ALL of your data. This process will wipe your data partition.
• Bugs
As far as I use Havoc-OS GSI 3.7 Android 10, I feel these bugs:
1. Camera Streching, use Open Camera
2. Video recording, use Open Camera too
3. Camera in Whats'App
4. I forgot
If you feel other bugs, please write it in below.
• Steps
Since currently this phone have Android 9 Android 10 update, the steps will be different. Dont worry, I'll write all the steps
From Android 9 stock :
1. Download TWRP 3.2 and 3.4
2. Copy to your PC
3. You must have Odin
4. Download GSI image A64 A-ONLY / ARM32_BINDER64 and put it in your Micro SD card or USB (for OTG)
5. Download Gapps (optional if you want google apps installed) nano / pico ARM-10.0
6. Download Magisk if you want root
7. Dont forget to copy downloaded zip file to Micro SD Card or USB (For OTG)
8. Flash TWRP 3.2 via odin, then reboot recovery
9. Wipe - format data - yes
10. Wipe - advanced wipe - choose system, data, internal, cache / dalvik cache
11. Install - install image - choose gsi image you downloaded - choose system image
12. reboot recovery
13. mount - system
14. wipe - advanced wipe - choose system - repair filesystem - resize
15. install - install gapps zip
16. reboot download
17. flash TWRP 3.4
18. reboot recovery
19. flash magisk (optional)
20. flash zygotefix
21. reboot and complete setup
From Android 10 stock :
1. Download TWRP 3.2 or OrangeFox
2. Download any a64 A/B (arm32_binder 64) xz decompress it* and put it in your Micro SD card or USB (for OTG) or internal memory
3. extract it with any extractor app
5. Download Gapps (optional if you want google apps installed, some have it included)
6. Reboot recovery
7. wipe. advance wipe. system, data, dalvick cache.
8. Flash the extracted GSI
9. Flash Gapps if they are not included
10. Flash magisk (optional)
11. Reboot system
And Done!
If you have anything you ask, feel free to join our Telegram group : t.me/SamsungGalaxyJ4
Or PM me in Telegram : t.me/hendramanudinata
Cheers!