Related
do step by step these Instructions for flashing any ROM on GT-P1000 :
1- first you must install Samsung USB drivers from attachment
2- then you must root your device
you can root p1000 2.3.X with DoomLord V4
download Doomlord then extract into your pc
set your device in USB debugging mode then connect via usb cable into pc
go to folder and run as administrator mode "runme.bat" file
press any key and waiting until your device restarts
if you see "SuperUser" icon in apps root be successful
3- galaxy tab p1000 is an old android device so you cannot flash cwm recovery with "Rom Manager"
you must flash recovery with odin
download Odin 3 v1.7
download recovery file "http://www.mediafire.com/?q8s0wnj1s6109gc"
open odin and unchecked "Re-partion" *** if u check this maybe brick your device!!
http://forum.xda-developers.com/attachment.php?attachmentid=2230439&stc=1&d=1378154387
click on PDA and open recovery file that you download
turn off your device
then hold volume- with power button , go to downloading mode
connect tablet via usb to pc , waiting for installing drivers
goto odin if you see yellow COM text its ok ,,
click on START button and waiting until restarting your device
now recovery cwm is installed
4- download your favorites rom and copy it into your sd card folder
5- turn off the device and hold volume+ with power button for 10-15 sec
up = volume +
down = volume -
select = power
Make a Nandroid backup before you install the new ROM.
go to wipe cash and do it
go to factory reset and do it
go to advanced and wipe calvik and wipe battery stat
then go back and select install zip from sd card
select your ROM file and tap power button , wait for installing rom
after you see Successful text you can reboot device and Enjoy from your new ROM
if you see this error : install aborted (status 7)
go to mount and storage then unmount "/system"
then format "/system" and "/data"
try again and it will be ok !!
View attachment Odin3_v1.7.rar
View attachment DooMLoRD_v4.zip
what files i have to use for p1N?
Stuck at pc ! mobile screen
While doing the steps, after I pressed start Odin said "fail!" with a red square above the yellow com12 square, I disconnected the device and connected it again but ended t this screen with mobile ! pc
thanks
whats is version of this CWM ?
there are thousand of such tuts are here.. atleast provide some roms
even if you dont wipe your data new rom will be installed i tested it
nandroid backup are rubbish just try to restore from nandroid backup and your tab will be bricked( my personal exp 4 days ago)
Is Doomlord handling 2.2 tabs also, or I need 2.3 somehow? Kies is not offering a fw update.
Sent from my GT-P1000 using xda app-developers app
Error
Hey XDA,
I Have a gt-p1000 , i rooted it succesfully using ut methods and wanted to install cwm . I tried by ur method but ended up bricking
I unbricked using ur method and now a prob arises
I get the superuser icon in my laucncher but i have lost root access ..
What to do ... Please Help
U cAN unroot it using xda 's unbrick method
Unfortunately u have bricked ur device but no big issue and i did it so its very easy
evry time i try this i end bricking my device ....
Pls help i wanna install a custom rom on it
Use overcome method. Follow my signature.
Sent from my GT-P1000 using xda app-developers app
If i rooted only the tab will be formatted?
sent from my GT-P1000 using XDA Premium
noo
hamada3381 said:
If i rooted only the tab will be formatted?
sent from my GT-P1000 using XDA Premium
Click to expand...
Click to collapse
no rooting will not delete any data
I think there is a problem with the recovery file
---------- Post added at 11:15 PM ---------- Previous post was at 10:19 PM ----------
If you will use "Installing Stock Rooted Rom" method then it will be formatted, but if it's rooting with some file then i think it's ok
I completed step 3, it said that all completed but now it is stuck in a restart loop, it shows some error colors (see image), then it shows Samsung logo, vibrates 3-4 times and it restarts again.
I cannot seem to get it recovery mode (UP+Power), download mode enters OK (Down+Power).
Any ideas ?
suite?
adrianTNT said:
I completed step 3, it said that all completed but now it is stuck in a restart loop, it shows some error colors (see image), then it shows Samsung logo, vibrates 3-4 times and it restarts again.
I cannot seem to get it recovery mode (UP+Power), download mode enters OK (Down+Power).
Any ideas ?
Click to expand...
Click to collapse
do you have solved this problem? I have the same picture after installed the CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar file.
Thanks
I was able to fix mine using instructions from a different topic, it was about the "Overcome" (images, rom or whatever was that), the file name is "The_Installation_Guide_The_Overcome_Experience.pdf" and at some point it tells you to load around 3 different files in that program, and flash them all.
After this I was able to put Cyanogen images on card and easy install them with the ClockWork mod loader.
Yeah. Do not panic if the video is hosed. I also got strange disruptions when following 'some online guides'.
The closest guide I have found that works to upgrade from Stock reliably, is the process mentioned on https://goo.im/devs/cmwiki/p1/p1c/ (Verizon CDMA P1000). I only have the CDMA version, not the SIM card version.
This is undergoing major revisions. I hope. I can say there are two (2) Verizon SCH-I800 recovery images available now. One that works is the ODIN image from TheCollective.
forum.xda-developers.com/showthread.php?t=2383201
TheCollective repository http://www.theandroidcollective.org/i800/public/
I have tested this image. It works.
I recovered the device after a working 2.3.5 stock was running (from the other viable stock image) and I wanted to flash a modem.bin from heimdall. Mistake. Device locked up at 100% along with heimdall, and a forced reboot (hold power down) only gave the
PHONE - ! - COMPUTER
screen.
It would also work to restore from Download mode, with ODIN and TheCollective stock.
I have never gotten the modem working again, though.
Hi there, where can I get a superuser flashable zip for P1000? I changed from cyanogenmod to omnirom and I have lost root access.
Are you sure? I am using Omnirom and I have super user.
You mean you don't have the SuperSu or whatever icon in app tray.
Go to Settings, scroll down all the way, above "about tablet" and performance, is there a SuperSu option?
Sent from my GT-P1000 using XDA Free mobile app
i opened downloading mode but Odin is not showing anything i install given or i download latest usb driver
Galaxy Tab S2 - Root, Recovery, ROMs
Index
Post 1
Root
Recovery
Post 2
Flashing ROMs
FAQ
Congratulations! You bought a Galaxy Tab 2 and you want to root. Follow these instructions and you will be well on your way!
I recommend you be on the latest firmware.
Current FW: OH7 5.1.1
Rooting Your Device
Step 1
Download Necessary Files
You will need to download ODIN 3.10.7 from here: ODIN 3.10.7
-Extract the files
You will need to download the correct cf-autoroot from here: [ROOT] CF-autoroot - Galaxy Tab S2 - SM-T810/T710/T715 [19/9/15]
-Please read the entire OP to determine which package you need for your specific device.
If you're on 5.1.1, you will need to flash a permissive custom kernel from here: [KERNEL] Permissive Lollipop 5.1.1 kernel for T710/T810
Step 2 - ONLY IF YOU ARE ON 5.1.1 - If not, continue to Step 3
Flash a custom, SE Linux permissive kernel
-Start your tablet in Download Mode
--Power off
--Press POWER + VOL DOWN + HOME simultaneously until you see a teal screen warning about custom OSs. Press VOL UP to continue into Download Mode
-Plugin your tablet via USB
-Run Odin3 v3.10.7.exe as administrator (right click --> Run As Administrator)
-Under Files [Download] section, click AP and select the kernel package you downloaded earlier.
-Click the Options tab and make sure Auto Reboot and F. Reset Time are the ONLY items checked. DO NOT CHECK Re-Partition!!
-Click start, wait about 10 seconds and your tablet will reboot automatically.
Step 3
ROOT your tablet
-Start your tablet in Download Mode
--Power off
--Press POWER + VOL DOWN + HOME simultaneously until you see a teal screen warning about custom OSs. Press VOL UP to continue into Download Mode
-Plugin your tablet via USB
-Run Odin3 v3.10.7.exe as administrator (right click --> Run As Administrator)
-Under Files [Download] section, click AP and select the cf-autoroot package you downloaded earlier
-Click the Options tab and make sure Auto Reboot and F. Reset Time are the ONLY items checked. DO NOT CHECK Re-Partition!!
-Click start, wait about 20 seconds and your tablet will reboot automatically. It will boot into a recovery screen with a red pirate android. This process will root your device and reboot automatically.Congratulations! You're now rooted!
Custom Recovery
Step 1
Download Necessary Files
You will need to download ODIN 3.10.7 from here: ODIN 3.10.7
-Extract the files
You will need to download the correct TWRP for your device here: [RECOVERY] TWRP 2.8.7.x Lollipop 5.0.2/5.1.1 - SMT810/T710
-Please read the entire OP to determine which package you need for your specific device.
Step 2
Flash a custom recovery
-Start your tablet in Download Mode
--Power off
--Press POWER + VOL DOWN + HOME simultaneously until you see a teal screen warning about custom OSs. Press VOL UP to continue into Download Mode
-Plugin your tablet via USB
-Run Odin3 v3.10.7.exe as administrator (right click --> Run As Administrator)
-Under Files [Download] section, click AP and select the recovery package you downloaded earlier.
-Click the Options tab and make sure Auto Reboot and F. Reset Time are the ONLY items checked. DO NOT CHECK Re-Partition!!
-Click start, wait about 20 seconds and your tablet will reboot automatically.Congratulations! You now have a custom recovery!
section is incomplete
Flashing Custom ROMs
Step 1
Download Custom ROMs
Custom ROMs are usually found in the Development sub-forum located here: Galaxy Tab S2 Android Development
Find the ROM you want and make sure the ROM supports your particular device. Download the ROM to your tab's SD Card.
Step 2
Backup Your Current ROM
-Start your tablet in Recovery mode
--Power off
--Press POWER + VOL UP + HOME simultaneously until you see the Samsung Galaxy Tab S2 boot screen and red letters on the top that states: Recovery is not seandroid enforcing
---Let go of all buttons and wait for recovery to boot
--It's ALWAYS a good idea to backup your current ROM. Don't ask why, just do it. Using your recovery of choice, follow the screen prompts to backup your ROM and select DATA, SYSTEM, and BOOT.
Step 3
Flash a Custom ROM
-If you want to "clean flash" (RECOMMENDED)
--Select the option in your recovery of choice to WIPE or FACTORY RESET
-If you want to "dirty flash"
mine
Updated OP with instructions for ROOT and Recovery. Other sections will come in the following days. If you find any errors, please let me know.
so now its a matter of time Custom ROMs such as CM12 comes for the Tab S2. Hoping it comes soon.
slavehunter105 said:
so now its a matter of time Custom ROMs such as CM12 comes for the Tab S2. Hoping it comes soon.
Click to expand...
Click to collapse
Well I'm working on a stock based ROM right now. CM will have to be somebody much more talented than myself.
Is root compatible with the 9.7" LTE (T815)? It's basically the same hardware as the T715 so should work but would love a confirmation on this as I don't see it listed the top section of the thread. Thanks much
VeEuzUKY said:
Is root compatible with the 9.7" LTE (T815)? It's basically the same hardware as the T715 so should work but would love a confirmation on this as I don't see it listed the top section of the thread. Thanks much
Click to expand...
Click to collapse
Why not just click the link and visit the original thread?
Is there a root for SM-T817T running 5.1.1 build LMY47X.T817TUVUIAOG8?
live4thamuzik said:
Is there a root for SM-T817T running 5.1.1 build LMY47X.T817TUVUIAOG8?
Click to expand...
Click to collapse
You can use the t810 root. The only issue is that your stock recovery will say t810. Irrelevant if you install twrp or just root with twrp itself.
Sorry for the complete noob question, but I am running the verizon version of the tablet Model SM-T817V android version 5.1.1.
Is this just like live4thamuziks S2 and my S2 is fully compatible to root using this method? I would reallly not like to brick my device!
Mckitty07 said:
Sorry for the complete noob question, but I am running the verizon version of the tablet Model SM-T817V android version 5.1.1.
Is this just like live4thamuziks S2 and my S2 is fully compatible to root using this method? I would reallly not like to brick my device!
Click to expand...
Click to collapse
Nope. You cannot use this method.
Hi,everyone!
Please advise would CF-Autoroot and TWRP work on SM-T815Y?
Thanks, However I think I am going to hold off until there is a root specifically for the t817t on 5.1.1 AOG8 cause I've read that a lot of people who flash the t810 root have bootloop issues, cannot use 4G LTE and cant go back to the stock t817.
live4thamuzik said:
Thanks, However I think I am going to hold off until there is a root specifically for the t817t on 5.1.1 AOG8 cause I've read that a lot of people who flash the t810 root have bootloop issues, cannot use 4G LTE and cant go back to the stock t817.
Click to expand...
Click to collapse
The ONLY people having bootloop issues are the ones that don't read instructions properly!
Flashing a t810 kernel on an LTE device will lose LTE connectivity.
There won't be a specific root for T817T as it's the same as the t815.
Worked perfectly! Successfully rooted my new S2 last weekend. Thank you. Was able to FREEZE 40+ running applications via Titanium Root which has had a magnificent impact on battery life. Life is good on the other (rooted) side!
ajindy said:
Worked perfectly! Successfully rooted my new S2 last weekend. Thank you. Was able to FREEZE 40+ running applications via Titanium Root which has had a magnificent impact on battery life. Life is good on the other (rooted) side!
Click to expand...
Click to collapse
Which ones did you feeeze?
RECOVERY IS NOT SEANDROID ENFORCING boot loop
Dear all,
Reeally appricite your effort getting full control of our tab S2!
Clearly I have done something very wrong while rooting, and updating my S2 from LL 5.0.2; I'm now at the point where my 810 tab are in a "endless" booting loop what the top-right corner of the boot screen are showing "RECOVERY IS NOT SEANDROID ENFORCING", looks like there is an attempt to boot, but it don't succeed.
Before I go further and make things even worse I wonder if you have hints or ideas that can help me get the tab s2 running andirod agian? (please...)
This is what I did:
from factory state wiht 5.0.2 on smt810:
I rooted : smt810_cf_autoroot.tar - booted -root working
I twrp - t810_twrp_LL_5.0.2.tar - booting - all working
I updated the sw : 810_oh7_fw_BigBot96.tar.md5 -- and is **** here, in the RECOVERY IS NOT SEANDROID ENFORCING loop
Clearly I'm not a expert, that have done something wrong - agian, truly appriciate any hints.
Allan
Allan68 said:
Dear all,
Reeally appricite your effort getting full control of our tab S2!
Clearly I have done something very wrong while rooting, and updating my S2 from LL 5.0.2; I'm now at the point where my 810 tab are in a "endless" booting loop what the top-right corner of the boot screen are showing "RECOVERY IS NOT SEANDROID ENFORCING", looks like there is an attempt to boot, but it don't succeed.
Before I go further and make things even worse I wonder if you have hints or ideas that can help me get the tab s2 running andirod agian? (please...)
This is what I did:
from factory state wiht 5.0.2 on smt810:
I rooted : smt810_cf_autoroot.tar - booted -root working
I twrp - t810_twrp_LL_5.0.2.tar - booting - all working
I updated the sw : 810_oh7_fw_BigBot96.tar.md5 -- and is **** here, in the RECOVERY IS NOT SEANDROID ENFORCING loop
Clearly I'm not a expert, that have done something wrong - agian, truly appriciate any hints.
Allan
Click to expand...
Click to collapse
It quite clearly states in this thread and MY original root thread that you must install the permissive kernel and the updated twrp for lollipop 5.1.1.
Yahoo!
ashyx said:
It quite clearly states in this thread and MY original root thread that you must install the permissive kernel and the updated twrp for lollipop 5.1.1.
Click to expand...
Click to collapse
Yahoo - Yet a example it helps to read before doing. Thanks a zillion!
SAMSUNG GALAXY TAB S2 (SM-T715) ROOTING METHOD
Hi guys, i'm here to show to everyone interested in, how to achieve root for a Galaxy Tab S2 with SM-T715 model ONLY.
First of all i should tell you some things before we begin. This rooting method is known as "Systemless root" wich means that you will be able to get root, but if you factory reset your device you will lost it and you'll have too make the whole process again if you want to root again. Unfortunately at the moment is the only working root method i've found and testes (thanks to Chainfire). Another important thing is that this root method has been only tested with SM-T715 model (LTE+Wifi version), it should work for other variants too, but i've not tested. Feel free to try.
* One last thing. The method that i'm going to show here is intended for information purpose only. If you want to try it then YOU are the only one responsable for your actions, because you are choosing to do, it not me. . *
So, let's begin. Here's what is needed:
- A backup of your ROM (just in case something goes wrong)
- Our Galaxy Tab S2 (obviously)
- PC
- Smart Switch (to install drivers)
- Odin
- A working brain (seriously)
1. First of all, install Smart Switch in your pc (if you have already installed it, skip this and go to the next step) then follow the installer instruction. It's just that easier. During the installation you will be prompt to plug in your Galaxy Tab S2 to install drivers (USB debugging must be ON). When finished, you'll have installed all the needed drivers and so you're ready to go to the next step. You can download Smart Switch by following this link for Windows :
http://www.samsung.com/global/download/smartswitchwin
or this link for MAC :
http://www.samsung.com/global/download/smartswitchmac
* As suggested by Ashyx, for those wich doesn't want to use SmartSwitch, you can download the Samsung USB drivers directly from here :
http://developer.samsung.com/technical-doc/view.do?v=T000000117#none
2. Now, you'll have to install the TWRP custom recovery, otherwise you won't be able to flash anything. To do so, first open Odin as administrator and uncheck "auto reboot" option, then load the TWRP recovery tar file into AP (for newer Odin versions) or PDA (for older Odin versions). At this point you have to shut down your Galaxy Tab S2 and then put it into recovery mode by holding POWER + HOME + VOL DOWN. When in Download mode, just plug in your usb cable and press VOL UP, (you can read it on your device display) Odin should recognize your device. If you can see a yellow or cyano "COM" port, then you're ready to press Start, otherwise repeat the step 2. You can download Odin by following this link :
http://ul.to/qg65aywo
or this link :
http://turbobit.net/ftzryv5mtc39.html
You can download the TWRP recovery (Thanks to Ashyx, all credits to him) by following this link :
http://forum.xda-developers.com/showthread.php?t=3205686
*BE CAREFUL, WHEN ODIN FINISHES THE FLASHING PROCESS, YOU'LL HAVE TO MANUALLY REBOOT INTO RECOVERY BY PRESSING POWER + HOME + VOL UP AFTER SHUTTING DOWN. IF YOU DON'T DO THIS, THE CUSTOM RECOVERY WILL BE REPLACED BY THE STOCK ONE AT THE NEXT REBOOT*
3. Now that you've rebooted into TWRP, reboot your device and if you'll be prompt to install Supersu because you're not rooted click "NO", we'll have to do it manually. Place the SuperSu zip file into your Galaxy Tab S2 storage (internal or external doesn't matter) then reboot again into recovery. At this time choose the "Install" button and after you've located it and then flash it. Reboot system and you're done. You can download SuperSu ( Thanks to Chainfire, all credits to him) by following this link:
http://download.chainfire.eu/supersu
Now you're rooted
If i helped, just hit the "THANKS" button, i'll really apprecciate it!
OK 3 things here.
1. You should tell people to install the Samsung USB drivers not Smartswitch as it doesn't play nice with Odin.
http://developer.samsung.com/technical-doc/view.do?v=T000000117
2. I specifically ask that no direct links are posted to my stuff(there is good reason for this, one of them being updates) so please use this link instead:
http://forum.xda-developers.com/showthread.php?t=3205686
3. You have also posted a link to an old twrp version. See point 2.
The latest version is 3.0.2-1.
Thanks.
ashyx said:
OK 3 things here.
1. You should tell people to install the Samsung USB drivers not Smartswitch as it doesn't play nice with Odin.
http://developer.samsung.com/technical-doc/view.do?v=T000000117
2. I specifically ask that no direct links are posted to my stuff(there is good reason for this, one of them being updates) so please use this link instead:
http://forum.xda-developers.com/showthread.php?t=3205686
3. You have also posted a link to an old twrp version. See point 2.
The latest version is 3.0.2-1.
Thanks.
Click to expand...
Click to collapse
Hi, sorry for the link, i will change it after this comment. As concerns for Usb drivers, i've installed it using smartswitch and after that i've uninstalled the program, so didn't know that could cause problem with Odin. In the last, i've linked to an "old" TWRP version because it was the latest version for SM-T715 when i made this thread. Even if the TWRP for SM-T710 or 815 works fine with this model, i preferred to link to a specify version. Hope you understand. Thank you
Hi,
What about Knox flag tripping?
Point 2) of the guide would trip the flag, am I right?
Inviato dal mio SM-T715 utilizzando Tapatalk
Giuskiller said:
2. Now, you'll have to install the TWRP custom recovery, otherwise you won't be able to flash anything.
Click to expand...
Click to collapse
Do you need to wipe /data on this device? It's not clear to me whether it's encrypted on this device.
Sent from my Galaxy S7 Edge using Tapatalk.
ianmacd said:
Do you need to wipe /data on this device? It's not clear to me whether it's encrypted on this device.
Sent from my Galaxy S7 Edge using Tapatalk.
Click to expand...
Click to collapse
Hi, you don't need to wipe anything. Just follow the instruction if you have problems pm me
Giuskiller said:
Hi, you don't need to wipe anything. Just follow the instruction if you have problems pm me
Click to expand...
Click to collapse
I've actually got an SM-T710, but I'm sure your instructions will work. I'm waiting for an official Dutch Marshmallow ROM to be released for the device before I take the plunge.
My question about /data was because it needs to be wiped on the S6 and S7, because those devices use Samsung encryption. I thought the situation was probably the same on the S2 Tab, but I gather from what you say that it isn't.
TWRP is too much trouble on the S6 and S7, so I used CF Auto Root on those devices. It's nice to know that TWRP is a viable option on the S2 Tab, however.
ianmacd said:
I've actually got an SM-T710, but I'm sure your instructions will work. I'm waiting for an official Dutch Marshmallow ROM to be released for the device before I take the plunge.
My question about /data was because it needs to be wiped on the S6 and S7, because those devices use Samsung encryption. I thought the situation was probably the same on the S2 Tab, but I gather from what you say that it isn't.
TWRP is too much trouble on the S6 and S7, so I used CF Auto Root on those devices. It's nice to know that TWRP is a viable option on the S2 Tab, however.
Click to expand...
Click to collapse
Yes i know, but it's different from S6/S7. Obviously i've tested it without wiping so i can tell you for sure . I think that MM will be avaible shortly because the rollout for your device has already started
Giuskiller said:
Yes i know, but it's different from S6/S7. Obviously i've tested it without wiping so i can tell you for sure . I think that MM will be avaible shortly because the rollout for your device has already started
Click to expand...
Click to collapse
Thanks for confirming. And thanks for putting together this guide.
gio90b said:
Hi,
What about Knox flag tripping?
Point 2) of the guide would trip the flag, am I right?
Inviato dal mio SM-T715 utilizzando Tapatalk
Click to expand...
Click to collapse
+1
~ Does this method trip Knox / burns the eFuse-Chip?
Hi guys! I can't root my SM-N910C. I followed Max Lee's steps in youtube via TWRP and I was able to do all the steps properly. But once I'm about to do the step wherein I will flash the kernel and I'll go to recovery mode it doesn't give the TEAM WIN screen. Instead, it'll say "Installing System Update" then will go to "No command" screen " then will give me the regular recovery mode. what shall I do? I've done the steps like 3 times now. and everytime I checked the software update in the about device it keeps telling me that there's an availble update for like 66.3mb.However, I've installed it so many times. it's not stopping. what shall I do to root my phone? please help me!
It works fine with CF-Root for N910C for me.
evonition said:
Hi guys! I can't root my SM-N910C. I followed Max Lee's steps in youtube via TWRP and I was able to do all the steps properly. But once I'm about to do the step wherein I will flash the kernel and I'll go to recovery mode it doesn't give the TEAM WIN screen. Instead, it'll say "Installing System Update" then will go to "No command" screen " then will give me the regular recovery mode. what shall I do? I've done the steps like 3 times now. and everytime I checked the software update in the about device it keeps telling me that there's an availble update for like 66.3mb.However, I've installed it so many times. it's not stopping. what shall I do to root my phone? please help me!
Click to expand...
Click to collapse
https://forum.xda-developers.com/no...wrp-treltexx-unofficial-t3541190/post70628182
evonition said:
Hi guys! I can't root my SM-N910C. I followed Max Lee's steps in youtube via TWRP and I was able to do all the steps properly. But once I'm about to do the step wherein I will flash the kernel and I'll go to recovery mode it doesn't give the TEAM WIN screen. Instead, it'll say "Installing System Update" then will go to "No command" screen " then will give me the regular recovery mode. what shall I do? I've done the steps like 3 times now. and everytime I checked the software update in the about device it keeps telling me that there's an availble update for like 66.3mb.However, I've installed it so many times. it's not stopping. what shall I do to root my phone? please help me!
Click to expand...
Click to collapse
I had the same issue with my N9100 and I followed the instruction below. I worked for me hope this help you also
Quote:
Originally Posted by rjma
Hi. It has been some time since I rooted but try this:
1) After root finishes in odin, don't reboot to system
2) Install TWRP in odin and don't boot to system. from download mode boot directly to recovery
3) Install the custom rom you want in TWRP
Sry, I cant help you with that
MrDSM said:
It works fine with CF-Root for N910C for me.
Click to expand...
Click to collapse
what's CF root?
CF-Root explanation
evonition said:
what's CF root?
Click to expand...
Click to collapse
CF-Root / CF-Autoroot is a flashable file created by the renowed developer Chainfire.
Once flashed into your phone it installs the root-manager app "SuperSU" (also from Chainfire) and does a few other mods for you to get root access.
It is important that your flash exactly the CF-Root file version corresponding to your phone model (SM-N910C) and Android version . For example, if you are using Android 6.0.1, you can get the file here:
https://download.chainfire.eu/559/CF-Root/CF-Auto-Root/CF-Auto-Root-trelte-treltexx-smn910c.zip
In case you cannot find the CF-Root file ready for installation for your phone model AND your Android version, then you can generate one by yourself in the main webpage, here:
https://desktop.firmware.mobi/
Please note in this last page you can create different "types" of file, and if you flash other that the "systemless" type you will lose your phones warranty.
Good luck !
Im not New to rooting phones Iam new to rooting Samsung phones and Odin Software.
some specs of SM-S737TL:
Carrier: WMFM
OS: Android 7.0
Model #: SM-S737TL
Device Name: Galaxy J7 Sky Pro
CPU: Exynos Octa 7870
Architecture: 8x Arm cortex-A53 @ 1.59 GHz
Board: Universal7870
Ram: 2G but actually is 1.85G "but who's counting right!?"
Internal Storage: 16G
Security KNOX
few things about this phone:
-In developer options there is NO option for OEM UNLOCK "My first phone without that option"
-FRP LOCK is ENABLED
-In this phone's recovery the top line reads "samsung/j7popeltetfntmo/j7popeltetfntmo7.0/NRD90M/S737TLUDU1AQF2 user/release-keys" My issue here is "TMO" Im guessing that that means T-Mobile???
-I feel like the Internal Storage was Auto Encrypted without asking the user and without an option to encrypt internal storage. The only option for Encryption is individual file encryption. I say this because battery life is horrible I have seen this on other phones that have encryption enabled. Or is it KNOX doing the battery drain?
-Odin download mode with VOL Dwn+Home Key+PWR
The Sky Pro is recognized by Odin with the Samsung USB Drivers
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Cf Autoroot supersu files
https://autoroot.chainfire.eu/
Odin Versions 1.3 to version 3.10.7 All in one
https://www.droid-developers.com/samsung-odin-downloader/
Odin Latest versions "3.12.10"
https://forum.xda-developers.com/showthread.php?t=2711451
Questions:
1. Is the Samsung J7 Sky Pro just a Rebranded
Samsung galaxy Wide
Samsung Galaxy Prime
2. Could we use a root method from a similar rebranded phone?
3. Could we use a SuperSU from the rebranded or Super similar phone? "i kinda know the answer but I ask anyway"
4. Could we just flash the latest SuperSU using CF auto-root w/Odin or Just typical ADB commands and gain root like that?
5. Notice the line at the recovery of this phone it says "j7popeltetfntmo" TMO usually means T-Mobile. So whats up with that???
6. Odin Mode easy to get to Rumor is Tracfone Doesnt lock bootloaders Does this mean the Sky Pro Tracfone Varient has a Unlocked bootloader out of box? I assume yes because we can get to bootloader, Odin Mode, and Recovery without hax/mods
Model Versions of Sky Pro
Family Mobile SM-S737TL
Straight Talk SM-S727VL
Total Wireless S727VL4G LTE
Tracfone SM-J727V (cdma)
I'm waiting on that too I bought two on black Friday to send to relatives in Mexico and so far no root no unlocking, waiting on Odin or that other root software to get er done
Sent from my HTC One M9 using XDA Free mobile app
this is op. Look for crom sevice on xda download install. I believed it oem unlucked my phone. Check it out guys. Get back to me let me know what you think. now if we have oem unlock we just need stock rom.
With this phone the way to root it would be Reset to factory then not letting the phone to load and run stock install WE HAVE TO AVOID ENCRYPTION WHICH THIS PHONE FORCES! SO WE FACTORY RESET AND GO IMMEDIETLY TO BOOTLOADER
Oh I should tell you I installed crom service but the phone didnt reset and apply update immedietly it was like 1 or 2 days later. I just left it installed figured if it didnt do anything right then it doesnt work. I Got distracted with a phone call and forgot to uninstall crom. Thats the story I want root for my phone
Com service
hotboi21 said:
Com service
Click to expand...
Click to collapse
My friends around the world
@hotboi21 @illiam1 and @regio81
i searched and analise the root for j727 j737 variants
i found this test method and share
*** remember ***
Install this at your own risk
I am not responsible for any damage to your device
*** steps ***
1. Download your official rom if root fail
2. Download odin and samsung drivers
3. Download TWRP and SuperSu 2.82 this release disable knox and security i tested
****3.1 (ExternalSD) Copy SuperSu 2.82 to ExternalSD i recomend
****3.2 InternalSD is formated with factory reset and if you restart mobile this encrypt your SD ok
4. Enable developer options in your phone and select USB debugging
5. Enter in stock recovery and start factory reset in your mobile [remove encrypt] Remember this reset is required
6. Reboot directly in download mode at this point
7. Open Odin and unselect AutoReboot
8. Flash TWRP after flash reboot mobile - press power + vol down
9. imediatly after enter recovery TWRP to flash SuperSu
10. Flash Supersu and Reboot with Root
11. if your root fail flash your official ROM
12. if your root is perfect press Thanks i am happy
*** files ***
Samsung drivers
https://drive.google.com/folderview?id=0B6O3B5Tc7Wr9ZzgxQmcyNmNoX00
Odin 3
https://devfiles.co/download/mhjr5aI8/Odin3_v3.13.1.zip
Recovery TWRP 3.1.1.0
https://www.androidfilehost.com/?fid=889764386195925101
SuperSu 2.82 Tested on Android 7.0 and Galaxy j7 PRO April 2018
https://www.androidfilehost.com/?fid=673956719939815322
hacker812c said:
My friends around the world
@hotboi21 @illiam1 and @regio81
i searched and analise the root for j727 j737 variants
i found this test method and share
*** remember ***
Install this at your own risk
I am not responsible for any damage to your device
*** steps ***
1. Download your official rom if root fail
2. Download odin and samsung drivers
3. Download TWRP and SuperSu 2.82 this release disable knox and security i tested
****3.1 (ExternalSD) Copy SuperSu 2.82 to ExternalSD i recomend
****3.2 InternalSD is formated with factory reset and if you restart mobile this encrypt your SD ok
4. Enable developer options in your phone and select USB debugging
5. Enter in stock recovery and start factory reset in your mobile [remove encrypt] Remember this reset is required
6. Reboot directly in download mode at this point
7. Open Odin and unselect AutoReboot
8. Flash TWRP after flash reboot mobile - press power + vol down
9. imediatly after enter recovery TWRP to flash SuperSu
10. Flash Supersu and Reboot with Root
11. if your root fail flash your official ROM
12. if your root is perfect press Thanks i am happy
*** files ***
Samsung drivers
https://drive.google.com/folderview?id=0B6O3B5Tc7Wr9ZzgxQmcyNmNoX00
Odin 3
https://devfiles.co/download/mhjr5aI8/Odin3_v3.13.1.zip
Recovery TWRP 3.1.1.0
https://www.androidfilehost.com/?fid=889764386195925101
SuperSu 2.82 Tested on Android 7.0 and Galaxy j7 PRO April 2018
https://www.androidfilehost.com/?fid=673956719939815322
Click to expand...
Click to collapse
Well done, wasnt sure if i could say anything yet. pointed in the Crom direction on another thread. I need to read all the rules. I am new at this but love it.
@whitebeardedtrimmer
Thanks for reply your status
I m happy
Ok. Before I even say anything, I have no idea what half of the things that are said on here means. All I want is to be able to use my phone as a mobile hotspot/tethering. But that setting is not on this phone. I have the j727vl. I downloaded a app that lets me access the setting but it's blank. Does that make sense? Anyways. I Googled ?how I could possible get my phone to let me do that, and i cane across rooting it. I've tries kingroot and one other thing (forgot what it's called ?) so please if someone can explain what to do (in a language I can understand) id be forever grateful. I just want to be able to watch Netflix again ??
crystalking1 said:
Ok. Before I even say anything, I have no idea what half of the things that are said on here means. All I want is to be able to use my phone as a mobile hotspot/tethering. But that setting is not on this phone. I have the j727vl. I downloaded a app that lets me access the setting but it's blank. Does that make sense? Anyways. I Googled ?how I could possible get my phone to let me do that, and i cane across rooting it. I've tries kingroot and one other thing (forgot what it's called ?) so please if someone can explain what to do (in a language I can understand) id be forever grateful. I just want to be able to watch Netflix again ??
Click to expand...
Click to collapse
You don't need an app to be able to use your phone as a hotspot
All you have to do is go to connections and then Mobile Hotspot and tethering
amdsam95 said:
You don't need an app to be able to use your phone as a hotspot
All you have to do is go to connections and then Mobile Hotspot and tethering
Click to expand...
Click to collapse
I cant. That is not even an option on this phone, or atleast not the one I have. I have read that the carrier may have that setting blocked.
illiam1 said:
Im not New to rooting phones Iam new to rooting Samsung phones and Odin Software.
some specs of SM-S737TL:
Carrier: WMFM
OS: Android 7.0
Model #: SM-S737TL
Device Name: Galaxy J7 Sky Pro
CPU: Exynos Octa 7870
Architecture: 8x Arm cortex-A53 @ 1.59 GHz
Board: Universal7870
Ram: 2G but actually is 1.85G "but who's counting right!?"
Internal Storage: 16G
Security KNOX
few things about this phone:
-In developer options there is NO option for OEM UNLOCK "My first phone without that option"
-FRP LOCK is ENABLED
-In this phone's recovery the top line reads "samsung/j7popeltetfntmo/j7popeltetfntmo7.0/NRD90M/S737TLUDU1AQF2 user/release-keys" My issue here is "TMO" Im guessing that that means T-Mobile???
-I feel like the Internal Storage was Auto Encrypted without asking the user and without an option to encrypt internal storage. The only option for Encryption is individual file encryption. I say this because battery life is horrible I have seen this on other phones that have encryption enabled. Or is it KNOX doing the battery drain?
-Odin download mode with VOL Dwn+Home Key+PWR
The Sky Pro is recognized by Odin with the Samsung USB Drivers
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Cf Autoroot supersu files
https://autoroot.chainfire.eu/
Odin Versions 1.3 to version 3.10.7 All in one
https://www.droid-developers.com/samsung-odin-downloader/
Odin Latest versions "3.12.10"
https://forum.xda-developers.com/showthread.php?t=2711451
Questions:
1. Is the Samsung J7 Sky Pro just a Rebranded
Samsung galaxy Wide
Samsung Galaxy Prime
2. Could we use a root method from a similar rebranded phone?
3. Could we use a SuperSU from the rebranded or Super similar phone? "i kinda know the answer but I ask anyway"
4. Could we just flash the latest SuperSU using CF auto-root w/Odin or Just typical ADB commands and gain root like that?
5. Notice the line at the recovery of this phone it says "j7popeltetfntmo" TMO usually means T-Mobile. So whats up with that???
6. Odin Mode easy to get to Rumor is Tracfone Doesnt lock bootloaders Does this mean the Sky Pro Tracfone Varient has a Unlocked bootloader out of box? I assume yes because we can get to bootloader, Odin Mode, and Recovery without hax/mods
Model Versions of Sky Pro
Family Mobile SM-S737TL
Straight Talk SM-S727VL
Total Wireless S727VL4G LTE
Tracfone SM-J727V (cdma)
Click to expand...
Click to collapse
Here is the SM-S737TL stock firmware I am not sure if I can post links. But will try both normal and one with a space.
https://mega.nz/#!mPJ2ULBL!WL62OzZynfPSviSQPDRihJl7WQBXlG3xUwYUy7CdUi8
https :// mega.nz /#!mPJ2ULBL!WL62OzZynfPSviSQPDRihJl7WQBXlG3xUwYUy7CdUi8
Remove spaces Link should be good.
Here is SM-S737TL stock firmware. It contains the 5 files listed below.
AP_S737TLUDU1AQF2_CL11476814_QB13814489_REV01_user_low_ship_meta.tar.md5
BL_S737TLUDU1AQF2_CL11476814_QB13814489_REV01_user_low_ship.tar.md5
CP_S737TLUDU1AQF2_CP6659865_CL11476814_QB13814489_REV01_user_low_ship.tar.md5
CSC_TFN_S737TLTFN1AQF2_CL11476814_QB13814489_REV01_user_low_ship.tar.md5
HOME_CSC_TFN_S737TLTFN1AQF2_CL11476814_QB13814489_REV01_user_low_ship.tar.md5
SM-S737TL COMBINATION File
Here is the combination file for the SM-S737TL.
COMBINATION_TFN_FA70_S737TLUDU1AQD2.7zr contains COMBINATION_TFN_FA70_S737TLUDU1AQD2_TFNFAC_CL11263326_QB13338441_REV01_user_mid_noship.tar.md5
Link with spaces.
https :// mega.nz /#!jKhE2arK!M0kxFVJjG7zjNJ3h66qb5y7WxJW-jH521BnuweyTThw
I tried the root method but odin alway fails and in the phone says security check failed
reggiet1 said:
Here is the combination file for the SM-S737TL.
COMBINATION_TFN_FA70_S737TLUDU1AQD2.7zr contains COMBINATION_TFN_FA70_S737TLUDU1AQD2_TFNFAC_CL11263326_QB13338441_REV01_user_mid_noship.tar.md5
Link with spaces.
https :// mega.nz /#!jKhE2arK!M0kxFVJjG7zjNJ3h66qb5y7WxJW-jH521BnuweyTThw
Click to expand...
Click to collapse
sir where is the link for combination
hacker812c said:
My friends around the world
@hotboi21 @illiam1 and @regio81
i searched and analise the root for j727 j737 variants
i found this test method and share
*** remember ***
Install this at your own risk
I am not responsible for any damage to your device
*** steps ***
1. Download your official rom if root fail
2. Download odin and samsung drivers
3. Download TWRP and SuperSu 2.82 this release disable knox and security i tested
****3.1 (ExternalSD) Copy SuperSu 2.82 to ExternalSD i recomend
****3.2 InternalSD is formated with factory reset and if you restart mobile this encrypt your SD ok
4. Enable developer options in your phone and select USB debugging
5. Enter in stock recovery and start factory reset in your mobile [remove encrypt] Remember this reset is required
6. Reboot directly in download mode at this point
7. Open Odin and unselect AutoReboot
8. Flash TWRP after flash reboot mobile - press power + vol down
9. imediatly after enter recovery TWRP to flash SuperSu
10. Flash Supersu and Reboot with Root
11. if your root fail flash your official ROM
12. if your root is perfect press Thanks i am happy
*** files ***
Samsung drivers
Odin 3
Recovery TWRP 3.1.1.0
SuperSu 2.82 Tested on Android 7.0 and Galaxy j7 PRO April 2018
Click to expand...
Click to collapse
So this method works for this mobile?
my model is Samsung sm-s727vl
which is from StraightTalk
Does this also sim unlocks the phone?
I don't really want to try this without someone saying this method worked.
Anything so Far?
Anything so Far? I tried to root my phone but when following instructions but I can't flash anything. I tried going in control panel, update drivers etc. but no luck. Help me and if anyone has successfully rooted the SM-S737TL then let me know how you did it. Thanks in advance. Will the other versions work with SM-S737TL? (eg. SM-J727V OR SM-S737VL)
Root didn't work for sm-s737tl
I love this Walmart family mobile phone but would like to root it. I bought the same phone for my mom because it's a great phone for the price. I tried the root as outlined but the result was FAIL! ODIN found the phone and connected but the end result was Complete (Write) operation failed and the download screen said something about a security check failing.
I'm assuming I'm missing an OEM unlock but don't see it in developer options menu.
My baseband version is s737tlud1aqf2
I really want to root this phone!
Hlp I have no computer can I root it ?????
I have no computer but I'm working on borrowing one I really hope this works I've been waiting on this for a long time thank you in advance:fingers-crossed:
hacker812c said:
My friends around the world
@hotboi21 @illiam1 and @regio81
i searched and analise the root for j727 j737 variants
i found this test method and share
*** remember ***
Install this at your own risk
I am not responsible for any damage to your device
*** steps ***
1. Download your official rom if root fail
2. Download odin and samsung drivers
3. Download TWRP and SuperSu 2.82 this release disable knox and security i tested
****3.1 (ExternalSD) Copy SuperSu 2.82 to ExternalSD i recomend
****3.2 InternalSD is formated with factory reset and if you restart mobile this encrypt your SD ok
4. Enable developer options in your phone and select USB debugging
5. Enter in stock recovery and start factory reset in your mobile [remove encrypt] Remember this reset is required
6. Reboot directly in download mode at this point
7. Open Odin and unselect AutoReboot
8. Flash TWRP after flash reboot mobile - press power + vol down
9. imediatly after enter recovery TWRP to flash SuperSu
10. Flash Supersu and Reboot with Root
11. if your root fail flash your official ROM
12. if your root is perfect press Thanks i am happy
*** files ***
Samsung drivers
https://drive.google.com/folderview?id=0B6O3B5Tc7Wr9ZzgxQmcyNmNoX00
Odin 3
https://devfiles.co/download/mhjr5aI8/Odin3_v3.13.1.zip
Recovery TWRP 3.1.1.0
https://www.androidfilehost.com/?fid=889764386195925101
SuperSu 2.82 Tested on Android 7.0 and Galaxy j7 PRO April 2018
https://www.androidfilehost.com/?fid=673956719939815322
Click to expand...
Click to collapse
It doesn't work on this device:
Samsung Galaxy J7 Prime
Model: SM-J727T
Baseband version: J727TUVU3BRH3
I get to step
8. Flash TWRP after flash reboot mobile - press power + vol down
Click to expand...
Click to collapse
and flash with odin fails and "SECURE CHECK FAIL (RECOVERY)" is displayed in the upper left hand corner of the screen. Just FYI for others trying to flash same model phone as me.