hi...
as the title...
who all are succeded in connecting usb external hdd to iconia ?
cause i tried with two, and booth are not recognized
one is pendrive sense 320gb, second is wd 250gb
all you who can connect, whats your hdd??
fyi, i can connect card reader and usb thumb drive
UPDATE
OKEY..
so i tried connecting my hdd through a powered usb hub, and still no luck,
i tried connect it with a Y cable, one to iconia and onte to powered hub, also no luck ...
is there any other way to try ? tried every thing from usb mount all, ntfs mount, charging while plugging , usb powered, new HDD, fat32 formatted , ntfs HDD and all in vain...
if not then, i am sure my device is defective of something....
How were they formatted? At those sizes, I'm going to guess they were formatted to NTFS which Android cannot read natively. There is, however, a thread in the Development section which includes a driver to enable NTFS support on the A500.
FloatingFatMan said:
How were they formatted? At those sizes, I'm going to guess they were formatted to NTFS which Android cannot read natively. There is, however, a thread in the Development section which includes a driver to enable NTFS support on the A500.
Click to expand...
Click to collapse
the first one have fat32 and nts partition, but the second one have 250gb full of fat32
i have installed ntfs mount and usb mount all, they just are not detected at all..
I just got my tab today, rooted and installed ntfs mount. No problems getting into my 500gig external hdd, formatted in ntfs.
Sent from my A500 using Tapatalk
I tried both 320gb Seagate and 750gb passport worked fine...They both formatted in fat32.
HM.. IT SEEMS , ONLY I CANT Get my hdd TO WORK IN ICONIA...
wonder why
is anyone here in asia or may be in indonesia??
may be this is rom related ?
l live in china ,very far from you .....
i still wait for the 3.1 update.
i am not sure can i receive ota update if i root it.
so i dont root ,and still wait.
well ,if i get the update of 3.1 ,i will come back and reply .
i have a 2T hdd, buffalo.
Okey... So now i have tried at least 6 different hdd and all failed...
I start to think ut is my hardware or rom problem?
Any solution ?
When i first connected a hdd i also thought it didn't work. When i looked at mnt/usb_storage.........no filelist. But when i got a cup of coffee and looked again the filelist was there. Apparantly the Acer needs a time to scan the HDD which can be long when it is large. So l'lle patience.
Sent from my A500 using Tapatalk
urbie47 said:
When i first connected a hdd i also thought it didn't work. When i looked at mnt/usb_storage.........no filelist. But when i got a cup of coffee and looked again the filelist was there. Apparantly the Acer needs a time to scan the HDD which can be long when it is large. So l'lle patience.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
how long actually ??
becauuse if this problem persist, i think i will take my device to the service centre,
btw, do they will know that i am rooted ?
last update : i have connected my hdd to iconia for about an hour without any luck,.
come on, do some one here can make a solution for me please ??
i can connect flash drive and card reader but not hdd, tried 6 different of them
even i asked in local acer forum in my country, everyone dont have problem...
so, what you think my problem here?
do i must do factory reset ?
interqd said:
HM.. IT SEEMS , ONLY I CANT Get my hdd TO WORK IN ICONIA...
wonder why
is anyone here in asia or may be in indonesia??
may be this is rom related ?
Click to expand...
Click to collapse
Are you sure you have power (external) going into your HD? I tried a WD portable and it wouldn't be read by the A500 until I connected it to an external power supply. Then I could read it without any problems.
iCurmudgeon said:
Are you sure you have power (external) going into your HD? I tried a WD portable and it wouldn't be read by the A500 until I connected it to an external power supply. Then I could read it without any problems.
Click to expand...
Click to collapse
how to connect it with external power supply ?
my hdd has only 1 usb slot, not 2 ..
Guy's....just download (HP USB Disk Storage Format Tool) to format your HD's to fat32. I did my 250 & 500GB HD and it work just find. Windows just don't format right...that's why I don't use windows to format my HD's. If you have Linux use Gparted.
I have
http://forum.xda-developers.com/showpost.php?p=14129262&postcount=8
I also have a 250gb that I can't get to read but then it needs dual-powered cable to be read on my laptop so I expected that. But my 320gb Buffalo, my 32gb Patriot and my 80gb Maxtor read just fine. All are NTFS. I have a 160gb from work that I will try tomorrow.
Connect it to windows and pull up the disk administrator (where you create partitions) and see if the disk is basic or dynamic? Just a hunch... have you tried different cables? And finally I want to be sure you are plugging it into the full sized USB pert and not the micro USB.
Sent from my A500 using Tapatalk
Euclid's Brother said:
Connect it to windows and pull up the disk administrator (where you create partitions) and see if the disk is basic or dynamic? Just a hunch... have you tried different cables? And finally I want to be sure you are plugging it into the full sized USB pert and not the micro USB.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
i am using mac, not windows, my hdd connect fine to mac, how to do this on mac?
not only different cables, yesterday i went to an it mall, there i tried almost 5 different 500gb hdd 2.5 inch, all failed, all have fat32 format, cause i checked them on my mac beforehand
yeah, of course i connect it to the usb 2.0 port..
this is what i dont understand, everyones hdd work fine in the iconia, why my iconia just cant read?
mine don't work either. I have a 1 TB western digital hard drive.
i use ntfs mount,first time install that ntfs mount apk...cant read my hdd but aftter reboot my iconia all partition on hdd can read and walk normal like on my laptop
I'm in Jakarta, so I don't think it can be a rom thing. Are you using NTFS mount, or just trying to plug the HDD into your tab and use the built-in software? Try this and it should fix the problem.
Hello guys so here is the issue
None of the usb 3.0 device seems to work In otg mode(all usb 3.0 devices are reverse compatible to usb 2.0) i plugged my 500gb hdd with externa power then a 16 gb usb 3.0 pendrive with no success as soon as the device get recognised i see usb safe to remove notification and then no udisk in explorer.
I seriously need a solution as all my usb devices are usb 3.0
Also when the hardware is capablr of usb 3.0 why did gionee crippled it to usb2.0 only?
dhirajranger said:
Hello guys so here is the issue
None of the usb 3.0 device seems to work In otg mode(all usb 3.0 devices are reverse compatible to usb 2.0) i plugged my 500gb hdd with externa power then a 16 gb usb 3.0 pendrive with no success as soon as the device get recognised i see usb safe to remove notification and then no udisk in explorer.
I seriously need a solution as all my usb devices are usb 3.0
Also when the hardware is capablr of usb 3.0 why did gionee crippled it to usb2.0 only?
Click to expand...
Click to collapse
Usb 3.0 port differs from 2.0 see the usb port of note 3 so it might be a problem to include it....since some HDD consume more power they will not work..ive tried with OTG and a trancend usb 3.0 8gb pendrive and it worked flawlessly
GTARaja said:
Usb 3.0 port differs from 2.0 see the usb port of note 3 so it might be a problem to include it....since some HDD consume more power they will not work..ive tried with OTG and a trancend usb 3.0 8gb pendrive and it worked flawlessly
Click to expand...
Click to collapse
yeah i know the port differs but since the soc is same i think we can solder a usb 3.0 with some tweaking. anyways i provided hdd with esternal power with the help of a cable i modified. also did you tried any 16gb pendrive? i think size may have been a problem too?
also pls can you try an external hddso that i woud be certain that this is not a issue with my phone only. thanks in advance
anybody else getting same issue? (notification saying usb safe to remove..)
dhirajranger said:
yeah i know the port differs but since the soc is same i think we can solder a usb 3.0 with some tweaking. anyways i provided hdd with esternal power with the help of a cable i modified. also did you tried any 16gb pendrive? i think size may have been a problem too?
also pls can you try an external hddso that i woud be certain that this is not a issue with my phone only. thanks in advance
anybody else getting same issue? (notification saying usb safe to remove..)
Click to expand...
Click to collapse
All you have to do is install Paragon NTFS & HFS+ on your phone & grant it superuser permission. Now use ES File Explorer to go to the /mount directory & you will find your hard disk partition there.
Sometimes you may get an error while trying to access the files in the secondary partitions. For this issue you will have to manually unmount those partitions in Paragon app and mount them to a location of your choice.
Hope this helps.
Hubriss said:
All you have to do is install Paragon NTFS & HFS+ on your phone & grant it superuser permission. Now use ES File Explorer to go to the /mount directory & you will find your hard disk partition there.
Sometimes you may get an error while trying to access the files in the secondary partitions. For this issue you will have to manually unmount those partitions in Paragon app and mount them to a location of your choice.
Hope this helps.
Click to expand...
Click to collapse
thanks bro it worked like charm.
Hi Guys,
does anyone know if there are any issues with the OTG on the stock Galaxy S4 (i9506 Telstra)?
I purchased a Sandisk Dual USB OTG drive 64GB and for some reason after it detects it and says "USB Connector Connected", it comes up with "USB Mass Storage Safely Removed" straight away.
I have checked few of the apps on the market that check if OTG works, and they all show it is enabled on the device.
I have also formated the drive exFat and tried FAT32, and neither of them work.
any ideas why the drive unmounts automatically?
@AntaresOne. Throw some light here!
"If someone helps, never forget to hit thanks ? "
@stormleader
Hello,
First, FAT32 is made to be used on disks of max 32GB (you can also use exFAT on this size as I currently do), and starting from 64GB you should always use exFAT.
Are you sure that device's USB connector is not dirty? If may be, clean it with a toothpick.
If this doesn't solve your problem, see if there are software updates for your device (could be a software issue), try also an other OTG device (a simple pendrive+OTG cable is enough)
Inviato dal mio GT-I9505
AntaresOne said:
@stormleader
Hello,
First, FAT32 is made to be used on disks of max 32GB (you can also use exFAT on this size as I currently do), and starting from 64GB you should always use exFAT.
Are you sure that device's USB connector is not dirty? If may be, clean it with a toothpick.
If this doesn't solve your problem, see if there are software updates for your device (could be a software issue), try also an other OTG device (a simple pendrive+OTG cable is enough)
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
cool, thanks. didn't know about the FAT32 limitation. and Yes my USB connector is clean and all. it doesn't seem to be hardware problem. I've got the latest stock 4.3.
I'll try on another S4 when I get the chance. I might need to get OTG cable, will come in handy one day. All I have right now is that Sandisk USB stick (which is very handy to have when it works )
I"ll try few more things and report back. I just wanted to check if anyone has OTG USB drive that works with the S4.
I just figured it out. I had encryption enabled on my phone memory and SD card. Not sure why this interferes with reading the USB.
It worked perfectly as soon as I disabled the decryption on the phone and SD card.
Hello guys!
I got my Y OTG CABLE yesterday and I wanted to plug my external HDD into my phone. I tried everything yesterday but i couldn't make it work. The disc was turned on but I couldn't see it on my phone. I tried many apps that they were supposed to do the job (like stickmount) but no luck.Can you help me fix it? I have This Kernel and I'm on Android L
Solved! Checked usb otg option on Synapse app that comes with kernel, saved changes, installed stickmount and plugged my external hdd on otg. Note: i checked su on boot on supersu because some times was kinda hard to connect external devices.
Hello everyone, i hope i'm in the right section of the forum.
I'm trying to load a Toshiba Canvio Basic via otg with my zenfone2 laser, but it won't start. Can you see the white led and ear the hd start but nothing happend on the phone.
Instead an old Samsung S2 plus, works perfecty (a little slowly), any one knows how and why?
Is there some limitation by lollipop?
ps : the Zenfone2 is stock, the only mod that i've do is the root, same thing on the S2 Plus
Lollipop cant read ntfs partition. Also you should use some externally powered USB hub if you are going to use external HDD.
souravipc53 said:
Lollipop cant read ntfs partition. Also you should use some externally powered USB hub if you are going to use external HDD.
Click to expand...
Click to collapse
The hd is fat32 formatted, and readed by an old samsung s2plus without any external powebank or usb hub, only connected to the phone....i'm going crazy