READ THIIS!
*this thread is for m9. it will NOT work on m7,or any older device. please check the general forum for your particular device for a similar thread.
this thread will let you unlock your bootloader without htcdev,or let you change your hboot watermark from relocked or locked back to stock.
advantages
-no hassle with htcdev,tokens,or unlock codes
-no submitting your phones personal info to htc
-the ability to get back to 100% stock without any visual traces or records of having been s off or unlocking your bootloader.
you do NOT need to downgrade your hboot. this simple adb command works without any scary hboot downgrades.
*you must be s off.
*you must have superuser installed
read this:
this will not work if your s on. its not a way to magically unlock
the usual disclaimers:
use this info at your own risk. if it melts your phone into a little pile of aluminum goo,its not my fault.
credits
-beaups for schooling me on echo comand protocol
-strace for originally discovering the location of the lock status flag(check out this thread for more info)
- @Mutasek24 for fearlessly testing all commands
IF you are an advanced user with adb/fastboot set up and some basic knowlede of the cmd window,you can skip to #2
1)set up adb(windows 7 and older)
-download this file
-install drivers: if you have htc sync installed,you should allready have drivers. if not,you can install htc sync,or install these modified htc drivers from revolutionary (driver mirror)
-unzip your miniadb_v1031.zip file. this is native funtionality in windows 7. you otherwise may need a utility such as "7-zip" to extract,or unzip it. place the unzipped folder onto the root of your C drive on your PC. root means the top level,not inside any folders. so just copy and paste,or drag and drop the folder onto C with everything else that is there. you may want to rename it to "miniadb_m7" since youll be putting some device specific files in here.
-open a command window. on windows 7,click the start bubble in the lower left and type "command" in the search box. xp i believe is similar or the same. doing this should open a small black command window.
-change to your miniadb_m7 directory. type the following at the prompt in your cmd window:
cd c:\miniadb_m7
your command promt should change to "c:miniadb_m7>" provided you: 1)unzipped the miniadb_v1031 zip file,and 2)put the folder on your c drive,and 3)entered the name of the folder correctly ("miniadb_m7" in this case)
-now make sure usb debugging is checked in developer options(you will need to turn it on first),and plug your phone into your PC with a usb cable
-make sure your phone is being recognized- type:
adb devices
if your drivers are installed correctly,this should return your phones serial number. you should hear the "found device" noises when you plug your phone in. if it starts installing drivers,wait for it to finish before typing the adb devices command.
if you get your serial number back,then enter this command:
adb reboot bootloader
this should take your phone to the "fastboot" screen,wich is white with colored letters. this is one mode of your bootloaders interactive modes. at the top youll see fastboot devices as confirmation youre in fastboot.
now enter:
fastboot devices
again,this should return your phones serial number. you should hear the "found device" noises when you plug your phone in. if it starts installing drivers,wait for it to finish before typing the adb devices command.
if you get your serial number back,you can enter the following to boot back to the phones OS:
fastboot reboot
and now,youve installed adb/fastboot and tested youre phones drivers. if at either spot,you have trouble and dont get your serial number back,there is some sort of connection issue. use these steps to troubleshoot:
troubleshooting connectivity issues:
-try a reboot of the PC
-try different usb cables and ports
-dont use a usb hub
-dont use usb 3.0
-make sure nothing capable of comunicating with the phone is enabled and running. htc sync,pdanet,easy tether,and even itunes have all been known to cause issues.
-windows 8 has been known to have issues. try a windows 7 or older machine
failing the above,
-i use these drivers for fastboot and adb(donwload and run as admin): http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe (mirror)
failing that,try manually updating the drivers in the following manner:
-put the phone in fastboot mode(select fastboot from the hboot menu)
-open device manager on the PC
-plug in phone,watch for it to pop up in device manager.
-update drivers with device manager,pointing the wizard to the extracted
driver download folder from above
note that you can check the connectivity of the phone,and make sure drivers are working by in the following manner:
-open cmd window. change to directory containing adb/fastboot utilities
-adb with the phone in the booted OS,usb debug enabled,enter:
adb devices in a cmd window
-fastboot with phone in fastboot,enter:
fastboot devices in cmd window
in either case,a properly connected phone with working drivers installed should report back the phones serial number.
Click to expand...
Click to collapse
this process,in your cmd window,should look something like this:
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Scott>[COLOR="red"]cd c:\miniadb_m7[/COLOR]
c:\miniadb_m7>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
FAxxxxxxxxxx device
c:\miniadb_m7>[COLOR="red"]adb reboot bootloader[/COLOR]
c:\miniadb_m7>[COLOR="red"]fastboot devices[/COLOR]
FAxxxxxxxxxx fastboot
c:\miniadb_m7>[COLOR="red"]fastboot reboot[/COLOR]
rebooting...
finished. total time: 0.037s
c:\miniadb_m7>
2)reset your "lock status flag"
to LOCK your bootloader,enter the following:
adb devices
adb shell
su (if needed to get a # prompt)
echo -ne '\x00\x00\x00\x00' | dd of=/dev/block/mmcblk0p2 bs=1 seek=33796
(i would very strongly recomend you copy/paste this)
exit
(exit a second time if you need to to get back to a normal > prompt)
adb reboot bootloader
verify you are now locked
_____________________________________________________________________________________________
to UNLOCK your bootloader,enter the following:
adb devices
adb shell
su (if needed to get a # prompt)
echo -ne "HTCU" | dd of=/dev/block/mmcblk0p2 bs=1 seek=33796
(i would very strongly recomend you copy/paste this)
exit
(exit a second time if you need to to get back to a normal > prompt)
adb reboot bootloader
verify you are now unlocked
other useful threads:
restore software status: original banner: http://forum.xda-developers.com/one-m9/general/how-to-restore-software-status-original-t3092882
change mid: fastbooot oem writemid xxxxxxxxx
change cid: fastboot oem writecid xxxxxxxx
mine
scotty1223 said:
mine
Click to expand...
Click to collapse
Thanks a lot for your very useful information. I have 2 questions??
1) When I am s-on and need to get s-off, then I need to be unlocked and rooted, so to do these still I need to use HTC-dev to unlock and root.
2) Does this method wipe data like when we use HTC-dev?
Nima78600 said:
Thanks a lot for your very useful information. I have 2 questions??
1) When I am s-on and need to get s-off, then I need to be unlocked and rooted, so to do these still I need to use HTC-dev to unlock and root.
2) Does this method wipe data like when we use HTC-dev?
Click to expand...
Click to collapse
1)yes. the first time you root,you will need to use htcdev to unlock the bootloader. the biggest benefit of this is the ability to return to a locked status for warranty. while s on,the best youll be able to do is relocked.
2)no,it will not wipe your data. it just changes the flag that hboot checks in order to decide if its locked,or not.
scotty1223 said:
1)yes. the first time you root,you will need to use htcdev to unlock the bootloader. the biggest benefit of this is the ability to return to a locked status for warranty. while s on,the best youll be able to do is relocked.
2)no,it will not wipe your data. it just changes the flag that hboot checks in order to decide if its locked,or not.
Click to expand...
Click to collapse
Thanks a lot mate. Appreciate for your replying
anyway to get "modified" back to "official" in boot loader?
Thanks @scotty1223. Used your threads for the m7 and m8. Happy to see this here too.
an0ther said:
anyway to get "modified" back to "official" in boot loader?
Click to expand...
Click to collapse
Flash your device RUU.
I am a little confused. How do I unlock my boot loader without root? I have s-off and i'm just messing around with trying to get rid of modified status but how does the "su" work without root?
an0ther said:
I am a little confused. How do I unlock my boot loader without root? I have s-off and i'm just messing around with trying to get rid of modified status but how does the "su" work without root?
Click to expand...
Click to collapse
You don't. This method requires s-off and root. It does say that in the OP BTW.
Behold_this said:
Thanks @scotty1223. Used your threads for the m7 and m8. Happy to see this here too.
Flash your device RUU.
Click to expand...
Click to collapse
I did, it still says modified in boot loader. Do I need to lock boot loader first?
an0ther said:
I did, it still says modified in boot loader
Click to expand...
Click to collapse
Use Sdcard method
Behold_this said:
Use Sdcard method
Click to expand...
Click to collapse
Mine is 64 gig, guess i'll have to get a 32 gig to make it fat32. Dang. Thanks for your help
Thanks for your very important knowledge.This question is not related to this thread, do you know which adb commands we can use to remove tampered flag as such in M7 and M8? I wonder mmcblk0p blocks might be different.
Thanks!
Enviado desde mi HTC One M9
coolberry said:
Thanks for your very important knowledge.This question is not related to this thread, do you know which adb commands we can use to remove tampered flag as such in M7 and M8? I wonder mmcblk0p blocks might be different.
Click to expand...
Click to collapse
The block where the tampered flag is write protected,so it cannot be written to with adb and have the change "stick". We know the command,it just doesn't work.
An ruu won't be available for all variants,so there will still be a work around,it will just be a bit more complicated. I just need to make sure it works and try to make it as user friendly as possible.
an0ther said:
Mine is 64 gig, guess i'll have to get a 32 gig to make it fat32. Dang. Thanks for your help
Click to expand...
Click to collapse
What does 64gb have to do with anything? Just back it up and reformat
scotty1223 said:
What does 64gb have to do with anything? Just back it up and reformat
Click to expand...
Click to collapse
Not possible. Only cards up to 32gb can be formatted as fat32, it's because above 32gb cards are not SDHC anymore but SDXC and this doesn't work..
devatxda said:
Not possible. Only cards up to 32gb can be formatted as fat32, it's because above 32gb cards are not SDHC anymore but SDXC and this doesn't work..
Click to expand...
Click to collapse
Did a little bit of searching and found a couple references to this:
http://mympx.org/Downloads/p13_sectionid/2/p13_fileid/13
And
http://m.download.cnet.com/EaseUS-Partition-Master-Home-Edition/3000-2248_4-10863346.html
Have you tried either?
Sent from my HTC One max
Behold_this said:
Use Sdcard method
Click to expand...
Click to collapse
im a little confused on what methods reset the flag,and which dont
could someone clarify the results of
-flash 0PJAIMG.zip via download mode from sd card
-flash 0PJAIMG.zip via RUU mode from pc
-run .exe from windows machine
-any other methods??
thanks
scotty1223 said:
im a little confused on what methods reset the flag,and which dont
could someone clarify the results of
-flash 0PJAIMG.zip via download mode from sd card
-flash 0PJAIMG.zip via RUU mode from pc
-run .exe from windows machine
-any other methods??
thanks
Click to expand...
Click to collapse
Ruu.exe worked for me.
Sdcard worked for @Mutasek24, but download mode manual flash did not (as reported in your other thread).
Because all methods are flashing the exact same SIGNED zip, and exe flashes through RUU mode, it's likely that flashing zip manually from RUU mode would reset the flag while using download mode does not. That needs to be tested tho.
Related
[GUIDE] UNLOCK - ROOT - RETURN TO STOCK and/ or UNBRICK your Nexus 7 3G “Nakasig- Tilapia” v4.2.2
- Disclaimer: I don't take any responsibility for anything you do to your tablet, which is to transform it into brick, break, or transform it into coffee machine -
Requirements:
1. You must have the sdk (ADT Bundle for Win) installed on your Pc and you are able to access, and use adb and fastboot.
NOTE: Notice the install location. This defaults to C:\Users\<user name>\AppData\Local\Android\android-sdk the platform tools (adb, fastboot) and usb drivers will be downloaded to this location. This will be referred to from here on as your sdk directory
But in case you haven't install all SDK, you can use only fastboot by the easy way.(Go here if you want to use the easy way to fastboot)
2. You must have ticked USB Debugging mode in your Nexus 7 3G
3 You must download and install - USB DRIVERS r_06 for Windows 7 & 8
4. Download one of both root-tool
CF- Auto-Root by Chainfire - Download link for Version Tilapia - Nakasig
or the Superboot r4 by Paul O’Brien - Actually I'm not sure if Superboot is functionnal for version 4.2.2 - I tested with my Grouper v4.2.2 and I stayed in Google screen with bootloop.
5. Download your recovery special for your Tilapia - Nakasig
CWM (Touch version or not)
TWRP - latest versions
ClockworkMod - Google Nexus 7 (GSM) - Superuser (fixed) for Android 4.2.
and rename your select with the name of the recovery image you chose to download.
6. The factory image for the Nexus 7 3G => 4.2.2 (JDQ39) - nakasig-jdq39-factory-0798439d.tgz - md5: ee8db1ed6ff1c007fe12136d4bc65cd8- size: 279.9MB - The Version Zip if you prefer
Click to expand...
Click to collapse
AND DON'T FORGET THAN IT'S BETTER FOR YOUR SPECIAL N7 3G+
TO USE THE SPECIAL RECOVERIES "TILAPIA - NAKASIG"
and NOT "GROUPER" WHICH ARE DIFFERENTS
Click to expand...
Click to collapse
**********************************************************************************************************************************************************************
Pre-Steps
To make this easier,
1 - you should put the root-tool.zip selected on the folder “fastboot” (if you use the easy way - Goto post #2)
2 – You should put the recovery.img selected on the folder “fastboot”
UNLOCK YOUR NEXUS 7 3G+
Click to expand...
Click to collapse
To unlock your device, you must go to your bootloader. To do that, you have possibilities;
1. Turn your device on while pressing volume down
or
1. Connect your device and go to cmd terminal
Code:
> cd \Users\<user name>\AppData\Local\Android\android-sdk\platform-tools (it's common localization for an auto install)
> adb devices
# the following output should be returned
List of devices attached
<device serial number> device
2. Boot to the bootloader by use adb
Code:
adb reboot bootloader
or
2 Bis. Boot to the bootloader by use fastboot
Code:
fastboot reboot-bootloader
3. Unlock your device* by
Code:
fastboot oem unlock
*You will have to accept and erase all of your data on the tablet.
You are unlocked :good:
By Fastboot only easy way - Unlock you device
Code:
C:\Users\Username>cd c:\fastboot
Code:
c:\fastboot>fastboot oem unlock
**********************************************************************************************************************************************************************
FLASH THE RECOVERY
Click to expand...
Click to collapse
You can choose one of both recoveries - CWM or TWRP
Flash ClockworkMod Recovery as Permanent recovery
Click to expand...
Click to collapse
(You're still inside the bootloader and connected through the usb cable)
1. Flash CWM especially for your N7 3G
Code:
fastboot flash recovery recovery-name of your recovery.img
To make CWM Permanent recovery
2. Boot into recovery by pressing “volume up” and when the menu says ‘recovery mode’ press the power button
3. Go to “Mounts and Storage” menu
4. select “mount system”
5. Type in cmd terminal
Code:
adb shell
cd /system
mv recovery-from-boot.p recovery-from-boot.bak
exit
If you having trouble gaining shell, try
Code:
adb kill-server
then
Code:
adb start-server
. And restart the lines command above
* For some people, it has been reported that you don't have to replace recovery-from-boot.bak. The flash is enough to make the recovery stick.
**********************************************************************************************************************************************************************
Flash TWRP as Permanent recovery
Click to expand...
Click to collapse
(You're still inside the bootloader and connected through the usb cable)
1. Flash TWRP especially for your N7 3G
Code:
fastboot flash recovery recovery-twrp-tilapia-2.4.4.0.img
To make TWRP Permanent recovery
2. Boot into recovery by pressing “volume up” and when the menu says ‘recovery mode’ press the power button
3. Go to “Mounts and Storage” menu
4. select “mount system”
5. Type in cmd terminal
Code:
adb shell
cd /system
mv recovery-from-boot.p recovery-from-boot.bak
exit
**********************************************************************************************************************************************************************
FOR THE ROOT
Click to expand...
Click to collapse
- [2013.02.20][N7 WiFi | N7 3G] CF-Auto-Root
Click to expand...
Click to collapse
What's installed
- SuperSU binary and APK
- Nothing else, that's it.
Installation and usage
- Download the ZIP file (see post below for link)
- Extract the ZIP file (you will see - 2 folders=> images & tools and 3 files: root-windows // root-mac // root-linux)
- Boot your device in bootloader/fastboot mode. Usually this can be done by turning your device off, then holding VolUp+VolDown+Power to turn it on.
- Connect your device to your computer using USB
- Windows:
Code:
Run root-windows.bat
- Linux
Code:
chmod +x root-linux.sh
Code:
Run root-linux.sh
- Mac OS X
Code:
chmod +x root-mac.sh
Code:
Run root-mac.sh
- [ROOT] Superboot - Nexus 7 WiFi / 3G root solution
Click to expand...
Click to collapse
How to use Superboot - Windows, Linux and OSX
- Download the Superboot zip file above and extract to a directory
- Put your device in bootloader mode - Turn off the phone then turn on with the 'volume up' and 'volume down' buttons both pressed to enter the bootloader (as pictured below)
- WINDOWS - double click 'superboot-windows.bat'
- MAC - Open a terminal window to the directory containing the files,
and type
Code:
chmod +x superboot-mac.sh
followed by
Code:
./superboot-mac.sh
- LINUX - Open a terminal window to the directory containing the files,
and type
Code:
chmod +x superboot-linux.sh
followed by
Code:
./superboot-linux.sh
**********************************************************************************************************************************************************************
RETURN TO STOCK and/or UNBRICK your N7 3G+
Click to expand...
Click to collapse
Before you begin, please make sure you have ADB and Fastboot drivers installed and working.
1. Download the factory image for the Nexus 7 3G=> 4.2.2 (JDQ39) - nakasig-jdq39-factory-0798439d.tgz - md5: ee8db1ed6ff1c007fe12136d4bc65cd8- size: 279.9MB - The Version Zip if you prefer
2. Extract the factory image into the same directory as your ADB and Fastboot executables (e.g. "\android-sdk\platform-tools")
3. Plug in your device. If you are booted into Android, open a command prompt to your ADB and Fastboot directory, then type:
Code:
adb reboot bootloader
If your device is powered off, press and hold both volume keys and the power button simultaneously. After holding all three buttons for a couple of seconds, your bootloader should launch. This should reboot you into the bootloader.
4. Type:
Code:
fastboot flash bootloader bootloader-tilapia-4.18.img
5. Type:
Code:
fastboot reboot-bootloader
6. Now type:
Code:
fastboot -w update image-nakasig-jdq39.zip
7. Optional: If you would like to relock your bootloader for warranty or security purposes, make sure you are in your bootloader screen again and type:
Code:
fastboot oem lock
8. If your tablet hasn't already rebooted automatically, you can type
Code:
fastboot reboot
Well done. You should now be back on stock Android 4.2.2
**************************************************************************************************************************************************************************************
These root tools are actually the easy way for rooting your device, so you can use them without problems.
IF YOU NEED MORE ABOUT THE NEXUS 7 3G+ "NAKASIG - TILAPIA" YOU MUST GO HERE
=> [Index]- 29 Dec 2012 - All for NEXUS 7 - "Nakasig/Tilapia" - (GSM/HSPA+)
and
=> NEXUS 7 3G-"nakasig"-For all Your Jelly Bean Discussions, Problems and Solutions
Click to expand...
Click to collapse
For my part I’ve used
the easy way by my fastboot guide for unlock my device,
Adb lines command for flash TWRP as permanent recovery,
Thanks for @mateorod, @Chainfire, @paulobrien and all members who helps for the development about the Nexus 7 3G+
The EASY WAY TO USE FASTBOOT LINES COMMAND
HELP FOR FLASH MORE FASTER WHEN YOU USE FASTBOOT LINE COMMAND
If you have got a problem with your adb or fastboot or recovery....it's very simply and faster
use this:
Download this file "fastboot.zip"
Install this file somewhere in one folder which is named "fastboot" on your PC
=> disk C: root
Unzipped this file on the folder "fastboot" and you will find 3 files:
- adb.exe
- AdbWinApi.dll
- fastboot.exe
and when you need to push something by the bootloader, you can use it.
Don't forget to push on this folder the file that you need. For exemple: boot.img or a recovery.img, etc...
The line command is :
Code:
c:\fastboot>
Enter
Code:
c:\fastboot>fastboot flash recovery recovery.img
Enter
If you want to flash the "recovery.img" file
******************************************************************
******************************************************************
If you want to know all lines of command
Code:
c:\fastboot>fastboot
Code:
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address
-n <page size> specify the nand page size. default: 2048
Reserved in case
Hello, this is my first post on xda.
When i tried use "adb fastboot bootloader" cmd say to me : no device. Where is problem?
piski93 said:
Hello, this is my first post on xda.
When i tried use "adb fastboot bootloader" cmd say to me : no device. Where is problem?
Click to expand...
Click to collapse
Try the easy way on first
Use the post 2.
You can use it for all the install, except for for the permanent recovery where you will have to use ADB line command.
The best you can do, it's to use fastboot easy way and when you have finished, you learn and install correctly your sdk and check all your parameters. And when you will be ready you will be able to use adb lines command easily to install your recovery in a permanent way.
It's too long for a course about sdk, the best you can do it's to to search and read. Go to my index, and read the General guides
Gonna try this later today. Though something is a bit fishy. When I use adb from the fastboot.zip it can't find my device but from the platform-tools dir it seems to work fine. Are they different versions? How big risk is it to brick the device while unlocking/rooting and installing recovery? Pls tell me its unbrickable. cheers
Skickat från min GT-I9300 via Tapatalk 2
znejk said:
Gonna try this later today. Though something is a bit fishy. When I use adb from the fastboot.zip it can't find my device but from the platform-tools dir it seems to work fine. Are they different versions? How big risk is it to brick the device while unlocking/rooting and installing recovery? Pls tell me its unbrickable. cheers
Click to expand...
Click to collapse
I can't says it's unbrickable !!!
The differences between these versions is:
If you use sdk/platform tools it's the more complete install and the easy way for fastboot, that just if you need to use fastboot line command, but it's not more complete for using with adb lines command.
If you go to the post 2, you will see all the lines command for fastboot.
If your sdk install is correct, you can use it without problems.
The easy way by fastboot is just a shotcut
philos64 said:
I can't says it's unbrickable !!!
The differences between these versions is:
If you use sdk/platform tools it's the more complete install and the easy way for fastboot, that just if you need to use fastboot line command, but it's not more complete for using with adb lines command.
If you go to the post 2, you will see all the lines command for fastboot.
If your sdk install is correct, you can use it without problems.
The easy way by fastboot is just a shotcut
Click to expand...
Click to collapse
I tried and everything seemed to work fine ... i Unlocked/flashed twrp then "mv recovery-from-boot.p recovery-from-boot.bak" didnt work cause it couldnt find the file... :/ i continued and flashed superboot and it seemed to work fine. Downloaded latest cm and gapps rebooted inte recovery and flashed them. Now I only have bootloop with cm10.1...
I know it aint bricked cause I think I can get into bootloader.
Edit: After a factory reset it worked! :>
znejk said:
How big risk is it to brick the device while unlocking/rooting and installing recovery? Pls tell me its unbrickable. cheers
Click to expand...
Click to collapse
The Nexus7 is very difficult to brick. It still is possible, but as far as I know there is only one way to do it - remove or destroy the bootloader.
Under normal circumstances, the only time you do anything with the bootloader is unlocking/locking it, which simply does a minor modification. That's perfectly fine. And the normal custom-recovery/root process doesn't touch it, so that's fine too. Doing system updates (even legit OTA ones) might upgrade the bootloader, as might flashing custom roms. But as long as you don't interrupt the process during that critical step, it should be OK.
So outside of erasing the bootloader or flashing a completely incompatible bootloader and rebooting, your N7 should be safe.
adb command line Linux support
Hi All,
Am new to this forum and also to my newly bought N73G. So I am unsure about the complete process though explained step by step. One thing that i wanted to confirm was Does ADT Bundle for linux work the same as that of windows? Cause I run the same on my PC; these command line instructions would they work the same way on Linux terminal?
It's not the same as Windows. You can download the ADT Bundle for Linux.
Sent from my N7 3G between sky and earth
Is there any solution for unlock and root Nexus 7 3G only with Apple Mac assistance? Thank you in advance!!!
foxstam said:
Is there any solution for unlock and root Nexus 7 3G only with Apple Mac assistance? Thank you in advance!!!
Click to expand...
Click to collapse
Can you explain what do you think by Apple Mac Assistance ?
If it's for SDK Tools, you will find here the Apple version => DOWNLOAD FOR OTHER PLATFORMS
I'm not sure which recovery images should be downloaded.
Is this one correct? - recovery-twrp-tilapia-2.3.2.1.img
what does this mean? "rename your select with the name of the recovery image you chose to download."
quote:
Requirements:
...
4. Download:
CWM (Touch version or not) or TWRP and rename your select with the name of the recovery image you chose to download.
thanks
elelab said:
I'm not sure which recovery images should be downloaded.
Is this one correct? - recovery-twrp-tilapia-2.3.2.1.img
what does this mean? "rename your select with the name of the recovery image you chose to download."
Requirements:
4. Download:
CWM (Touch version or not) or TWRP and rename your select with the name of the recovery image you chose to download.
Click to expand...
Click to collapse
Yes, you can use the recovery-twrp-tilapia-2.3.2.1.img without problem
and when I writes "rename your select with the name of the recovery image you chose to download", I mean that you can rename the IMG file by "recovery" simply. It's more faster.
minimum steps to root Nexus7(3G) - for beginners
confused by too much info. on how to root Nexus 7
can this be as simple as:
1 unlock
2 root
question:
1. unlock step - erase all of your data on the tablet
If I don't care my data (I just bought it), after unlocking, can Nexus start as normal?
2. Why do we need flash the recovery?
"Pre-Steps
To make this easier,
1 - ...
2 – You should put the recovery.img selected on the folder “fastboot” (if you use the easy way - Goto post #2)
" fastboot flash recovery recovery-twrp-tilapia-2.3.2.1.img"
does "recovery-twrp-tilapia-2.3.2.1.img" mean the "recovery.img"?
thanks
elelab said:
confused by too much info. on how to root Nexus 7
can this be as simple as:
1 unlock
2 root
question:
1. unlock step - erase all of your data on the tablet
If I don't care my data (I just bought it), after unlocking, can Nexus start as normal?
2. Why do we need flash the recovery?
Click to expand...
Click to collapse
Answers:
1 - Yes, the advert is clear, all of your data will be erased !
2 - If you want to flash a rom custom, you need a recovery
elelab said:
"Pre-Steps
To make this easier,
1 - ...
2 – You should put the recovery.img selected on the folder “fastboot” (if you use the easy way - Goto post #2)
" fastboot flash recovery recovery-twrp-tilapia-2.3.2.1.img"
does "recovery-twrp-tilapia-2.3.2.1.img" mean the "recovery.img"?
Click to expand...
Click to collapse
Yes, it's correct. it's more faster to write: "recovery.img" than "recovery-twrp-tilapia-2.3.2.1.img".
It's the same file, just rename.
This has no effect on the recovery flash
Can I root my device (4.2.2) using Superboot yet ?
Re: [GUIDE] - Updated 08 Feb - Unlock and Root a Nexus7 3G “Nakasig- Tilapia”
I received 4.2.2 update today. I haven't installed it for fear of losing root. Should i repeat the procedure to root again after updating my n7. Will i again loose my data? Or the bootloader will remain unlocked? Please help
Sent from my Nexus 7 using xda app-developers app
sukhjit_bhullar said:
I received 4.2.2 update today. I haven't installed it for fear of losing root. Should i repeat the procedure to root again after updating my n7. Will i again loose my data? Or the bootloader will remain unlocked? Please help
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I can flash UPDATE-SuperSU-v1.04.zip in CWM/TWRP recovery to get root after update from 4.2.1
You will not loose any data.
Your bootloader will upgrade to 4.18 and still unlocked.
*this thread is for m7. it will not work on m8,m9, or any other newer devices! search m8 general for the thread there(same name)
this thread will let you unlock your bootloader without htcdev,or let you change your hboot watermark from relocked or locked back to stock.
originally,we used a zip file flashable in recovery. i have found it to work on gsm devices with 1.44 hboot and CW recovery. it did not work with twrp. if the following is too scary,feel free to test the zip files. that thread,info,and downloads can be found here. since not all recoverys are working,these values can be changed with simple adb commands.
advantages
-no hassle with htcdev,tokens,or unlock codes
-no submitting your phones personal info to htc
-the ability to get back to 100% stock without any visual traces or records of having been s off or unlocking your bootloader.
you do NOT need to downgrade your hboot. this simple adb command works without any scary hboot downgrades.
*you must be s off.
*you must have superuser installed(seethis post] if you need help installing a recovery so you can install superuser)
read this:
this will not work if your s on. its not a way to magically unlock
the usual disclaimers:
use this info at your own risk. if it melts your phone into a little pile of aluminum goo,its not my fault.
credits
-beaups for giving me the echo comand,so yall didnt need to dump,edit with a hex editor,and copy back
-strace for originally discovering the location of the lock status flag(check out this thread for more info)
-kdj67f for fearlessly testing on vzw m7_wlv and putting up some screenshots in post 2. thanks!
-matthew0776 for fearlessly testing for sprint m7_wls
IF you are an advanced user with adb/fastboot set up and some basic knowlede of the cmd window,you can skip to #2
1)set up adb
-download this file
-install drivers: if you have htc sync installed,you should allready have drivers. if not,you can install htc sync,or install these modified htc drivers from revolutionary (driver mirror)
-unzip your miniadb_v1031.zip file. this is native funtionality in windows 7. you otherwise may need a utility such as "7-zip" to extract,or unzip it. place the unzipped folder onto the root of your C drive on your PC. root means the top level,not inside any folders. so just copy and paste,or drag and drop the folder onto C with everything else that is there. you may want to rename it to "miniadb_m7" since youll be putting some device specific files in here.
-open a command window. on windows 7,click the start bubble in the lower left and type "command" in the search box. xp i believe is similar or the same. doing this should open a small black command window.
-change to your miniadb_m7 directory. type the following at the prompt in your cmd window:
cd c:\miniadb_m7
your command promt should change to "c:miniadb_m7>" provided you: 1)unzipped the miniadb_v1031 zip file,and 2)put the folder on your c drive,and 3)entered the name of the folder correctly ("miniadb_m7" in this case)
-now make sure usb debugging is checked in developer options(you will need to turn it on first),and plug your phone into your PC with a usb cable
-make sure your phone is being recognized- type:
adb devices
if your drivers are installed correctly,this should return your phones serial number. you should hear the "found device" noises when you plug your phone in. if it starts installing drivers,wait for it to finish before typing the adb devices command.
if you get your serial number back,then enter this command:
adb reboot bootloader
this should take your phone to the "fastboot" screen,wich is white with colored letters. this is one mode of your bootloaders interactive modes. at the top youll see fastboot devices as confirmation youre in fastboot.
now enter:
fastboot devices
again,this should return your phones serial number. you should hear the "found device" noises when you plug your phone in. if it starts installing drivers,wait for it to finish before typing the adb devices command.
if you get your serial number back,you can enter the following to boot back to the phones OS:
fastboot reboot
and now,youve installed adb/fastboot and tested youre phones drivers. if at either spot,you have trouble and dont get your serial number back,there is some sort of connection issue. use these steps to troubleshoot:
troubleshooting connectivity issues:
-try a reboot of the PC
-try different usb cables and ports
-dont use a usb hub
-dont use usb 3.0
-make sure nothing capable of comunicating with the phone is enabled and running. htc sync,pdanet,easy tether,and even itunes have all been known to cause issues.
-windows 8 has been known to have issues. try a windows 7 or older machine
failing the above,
-i use these drivers for fastboot and adb(donwload and run as admin): http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe (mirror)
failing that,try manually updating the drivers in the following manner:
-put the phone in fastboot mode(select fastboot from the hboot menu)
-open device manager on the PC
-plug in phone,watch for it to pop up in device manager.
-update drivers with device manager,pointing the wizard to the extracted
driver download folder from above
note that you can check the connectivity of the phone,and make sure drivers are working by in the following manner:
-open cmd window. change to directory containing adb/fastboot utilities
-adb with the phone in the booted OS,usb debug enabled,enter:
adb devices in a cmd window
-fastboot with phone in fastboot,enter:
fastboot devices in cmd window
in either case,a properly connected phone with working drivers installed should report back the phones serial number.
Click to expand...
Click to collapse
this process,in your cmd window,should look something like this:
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Scott>[COLOR="red"]cd c:\miniadb_m7[/COLOR]
c:\miniadb_m7>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
FAxxxxxxxxxx device
c:\miniadb_m7>[COLOR="red"]adb reboot bootloader[/COLOR]
c:\miniadb_m7>[COLOR="red"]fastboot devices[/COLOR]
FAxxxxxxxxxx fastboot
c:\miniadb_m7>[COLOR="red"]fastboot reboot[/COLOR]
rebooting...
finished. total time: 0.037s
c:\miniadb_m7>
2)reset your "lock status flag"
to LOCK your bootloader,enter the following:
adb devices
adb shell
su (if needed to get a # prompt)
echo -ne '\x00\x00\x00\x00' | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
(i would very strongly recomend you copy/paste this)
exit
(exit a second time if you need to to get back to a normal > prompt)
adb reboot bootloader
verify you are now locked
_____________________________________________________________________________________________
to UNLOCK your bootloader,enter the following:
adb devices
adb shell
su (if needed to get a # prompt)
echo -ne "HTCU" | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
(i would very strongly recomend you copy/paste this)
exit
(exit a second time if you need to to get back to a normal > prompt)
adb reboot bootloader
verify you are now unlocked
*i have tested this on my gsm htc one. if someone wants to test on vzw,ill add you to the credits
99% is good enough for me haha! Phone just hut 50% charged, give me a minute. Will post back with pictures.
Sent from my HTC6500LVW using XDA Premium 4 mobile app
---------- Post added at 08:56 PM ---------- Previous post was at 08:41 PM ----------
Confirmed, code working. Flags set/reset. Phone even reboots and works will upload pics/screenshots.
Thanks!
Starting out unlocked:
Locking:
Locked:
Unlocking:
Re-unlocked:
Very good work!
Any idea how you would get rid of the tampered flag?
Sent from my HTC One using xda app-developers app
akuma24 said:
Any idea how you would get rid of the tampered flag?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2477792
Is this intended for people who got S-OFF and didn't use revone to unlock their bootloader at the same time? What would be the motivation for people doing that (not unlocking)?
will this also remove the "Tampered" flag once S-on has been returned?
deeevan said:
Is this intended for people who got S-OFF and didn't use revone to unlock their bootloader at the same time? What would be the motivation for people doing that (not unlocking)?
Click to expand...
Click to collapse
it can be used for that,with the advantage of being able to unlock without having to submit ones perosnal phone info to htcdev for an unlock code(i.e. no record of having unlocked)
however,it is moreso intended for folks who are unlocked to get back to 100% stock locked. fastboot oem lock gets you relocked and before anyone can suggest it,using the bootloader modifier to just change the banner is IMO fraud.
if you need to return a phone for a legitimate warranty claim,its easy to make it 100% correct in case it makes it back out into the public
broli-zn said:
will this also remove the "Tampered" flag once S-on has been returned?
Click to expand...
Click to collapse
once s on,youll have to run an ruu. prior to s on,you can use the link mentioned above(this one) to reset the tampered flag and remove that banner
scotty1223 said:
it can be used for that,with the advantage of being able to unlock without having to submit ones perosnal phone info to htcdev for an unlock code(i.e. no record of having unlocked)
Click to expand...
Click to collapse
My question is, Can't both of these be achieved with revone -u and revone -l? I unlocked using revone, I never requested an unlock code from htcdev. If you need to be S-OFF ie, use revone, why wouldn't someone just add the extra -u parameter and unlock bootloader at the same time?
The lock command is definitely useful for those on a revone incompatible hboot (most).
Just tried this and it worked just fine, thanks very much.:good:
Cool
Much better than using revone to do this, as it leaves no tracks. Kudos 2 u.
i never claimed this was a major breakthru. this is just anotehr way to skin the cat. if revone is still working and your more comfortable using that,by all means do so.
thanks for all the comments,im glad some are finding it useful
Could you tell me if this method to lock/unlock bootloader wipes phone data like the method via htcdev?
Simple and easy guide much obliged Scotty ?
Skickat från min HTC One med Tapatalk
Can I relock It this way if I unlocked it through htc dev, and get the status locked instead of relocked?
Sent from my HTC One using xda premium
piterk said:
Could you tell me if this method to lock/unlock bootloader wipes phone data like the method via htcdev?
Click to expand...
Click to collapse
no,it does not erase data.
the flashing of unlock code,and relock command initiate hboot to factory reset. this is only changing the flag that hboot checks.
jaypeg123 said:
Can I relock It this way if I unlocked it through htc dev, and get the status locked instead of relocked?
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
yes. thats the whole point- no relocked watermark
Yes this is outstanding. Thank you :thumbup::thumbup::thumbup::thumbup:
Sent from my HTC One using xda premium
if we have installed a modified hboot to remove the red text, can we use this method to lock or it will brick it?
Nikos2k said:
if we have installed a modified hboot to remove the red text, can we use this method to lock or it will brick it?
Click to expand...
Click to collapse
you are fine. this mod has nothing to do with hboot.
@scotty1223
I tried to copy mmcblk0p3 from /dev/block/ to /data/local/tmp and verify that all is done OK..
However, after command
Code:
echo -ne '\x00\x00\x00\x00' | dd of=/data/local/tmp/mmcblk0p3 bs=1 seek=33796
I noticed that size of mmcblk0p3 in /data/local/tmp instead of 127 Mb changed to 33800 b (ie 33796 + 4 b).
Where is mistake? I have or have you? Check your mmcblk0p3 in /dev/block/
There are should be no all 00 after offset 0x8408.
Thank you!!!
Golv said:
@scotty1223
I tried to copy mmcblk0p3 from /dev/block/ to /data/local/tmp and verify that all is done OK..
However, after command
Code:
echo -ne '\x00\x00\x00\x00' | dd of=/data/local/tmp/mmcblk0p3 bs=1 seek=33796
I noticed that size of mmcblk0p3 in /data/local/tmp instead of 127 Mb changed to 33800 b (ie 33796 + 4 b).
Where is mistake? I have or have you? Check your mmcblk0p3 in /dev/block/
There are should be no all 00 after offset 0x8408.
Thank you!!!
Click to expand...
Click to collapse
im not sure what youve got going on with the filesize,but he 33796 is an address,not a size.
the command is writing only 4 bytes,at 8404,8405,8406,8407. if you wish to verify your HTCU or HTCL has been overwritten,dump it to your sd card: dd if=/dev/block/mmcblk0p3 of=/sdcard/mmcblk0p3 then pull it,and open it with a hex editor.
if youre working with a different device,pull mmcblk0p3 first,before issueing any commands,open with a hex editor,and verify the location of the lock flag.
the rest of 8400 is in fact all nulls, or 00
hope that answers your questions. i think youve just found some funky data becasue of the way youre attempting to verify it.
this thread is for m7. it will not work on m8. please check the general section of your device forums if you do NOT have m7
if you have recently s-off'ed using a java card,or some other exploit that did not remove your tampered banner from the bootloader screen,then this thread is for you.
you do NOT need to downgrade your hboot. this simple adb command works without any scary hboot downgrades.
*you must be s off.
*you must have superuser installed(see this thread if you need help installing superuser)
read this:
this will not work if your s on
the usual disclaimers:
i have tested this my my m7_ul t mobile variant,but use this info at your own risk. if it melts your phone into a little pile of aluminum goo,its not my fault.
credits
-beaups for giving me the echo comand,so yall didnt need to dump,edit with a hex editor,and copy back
-andybones for testing it on m7_wlv
IF you are an advanced user with adb/fastboot set up and some basic knowlede of the cmd window,you can skip to #2
1)set up adb
-download this file
-install drivers: if you have htc sync installed,you should allready have drivers. if not,you can install htc sync,or install these modified htc drivers from revolutionary (driver mirror)
-unzip your miniadb_v1031.zip file. this is native funtionality in windows 7. you otherwise may need a utility such as "7-zip" to extract,or unzip it. place the unzipped folder onto the root of your C drive on your PC. root means the top level,not inside any folders. so just copy and paste,or drag and drop the folder onto C with everything else that is there. you may want to rename it to "miniadb_m7" since youll be putting some device specific files in here.
-open a command window. on windows 7,click the start bubble in the lower left and type "command" in the search box. xp i believe is similar or the same. doing this should open a small black command window.
-change to your miniadb_m7 directory. type the following at the prompt in your cmd window:
cd c:\miniadb_m7
your command promt should change to "c:miniadb_m7>" provided you: 1)unzipped the miniadb_v1031 zip file,and 2)put the folder on your c drive,and 3)entered the name of the folder correctly ("miniadb_m7" in this case)
-now make sure usb debugging is checked in developer options(you will need to turn it on first),and plug your phone into your PC with a usb cable
-make sure your phone is being recognized- type:
adb devices
if your drivers are installed correctly,this should return your phones serial number. you should hear the "found device" noises when you plug your phone in. if it starts installing drivers,wait for it to finish before typing the adb devices command.
if you get your serial number back,then enter this command:
adb reboot bootloader
this should take your phone to the "fastboot" screen,wich is white with colored letters. this is one mode of your bootloaders interactive modes. at the top youll see fastboot devices as confirmation youre in fastboot.
now enter:
fastboot devices
again,this should return your phones serial number. you should hear the "found device" noises when you plug your phone in. if it starts installing drivers,wait for it to finish before typing the adb devices command.
if you get your serial number back,you can enter the following to boot back to the phones OS:
fastboot reboot
and now,youve installed adb/fastboot and tested youre phones drivers. if at either spot,you have trouble and dont get your serial number back,there is some sort of connection issue. use these steps to troubleshoot:
troubleshooting connectivity issues:
-try a reboot of the PC
-try different usb cables and ports
-dont use a usb hub
-dont use usb 3.0
-make sure nothing capable of comunicating with the phone is enabled and running. htc sync,pdanet,easy tether,and even itunes have all been known to cause issues.
-windows 8 has been known to have issues. try a windows 7 or older machine
failing the above,
-i use these drivers for fastboot and adb(donwload and run as admin): http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe (mirror)
failing that,try manually updating the drivers in the following manner:
-put the phone in fastboot mode(select fastboot from the hboot menu)
-open device manager on the PC
-plug in phone,watch for it to pop up in device manager.
-update drivers with device manager,pointing the wizard to the extracted
driver download folder from above
note that you can check the connectivity of the phone,and make sure drivers are working by in the following manner:
-open cmd window. change to directory containing adb/fastboot utilities
-adb with the phone in the booted OS,usb debug enabled,enter:
adb devices in a cmd window
-fastboot with phone in fastboot,enter:
fastboot devices in cmd window
in either case,a properly connected phone with working drivers installed should report back the phones serial number.
Click to expand...
Click to collapse
this process,in your cmd window,should look something like this:
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Scott>[COLOR="red"]cd c:\miniadb_m7[/COLOR]
c:\miniadb_m7>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
FAxxxxxxxxxx device
c:\miniadb_m7>[COLOR="red"]adb reboot bootloader[/COLOR]
c:\miniadb_m7>[COLOR="red"]fastboot devices[/COLOR]
FAxxxxxxxxxx fastboot
c:\miniadb_m7>[COLOR="red"]fastboot reboot[/COLOR]
rebooting...
finished. total time: 0.037s
c:\miniadb_m7>
2)reset your "tampered flag"
enter the following:
adb devices
adb shell
su (if needed to get a # prompt)
echo -ne '\x00' | dd of=/dev/block/mmcblk0p7 bs=1 seek=4265988
(i would very strongly recomend you copy/paste this)
exit
(exit a second time if you need to to get back to a normal > prompt)
adb reboot bootloader
verify tamered is gone
other useful threads:
how to lock/unlock your bootloader without htcdev(s-off required)
if this does not work for you
*first reread this thread in its entirety. make sure you have met the prerequisites,and double check your code and make sure you have not forgotten a step,or screwed something up trying to type it (especially if using a terminal emulator),and check that you have not gotten any errors.
if youre still confident you did things correctly,you need to PM me:
1)the results of: fastboot getvar all
2)a link to an uploaded p7.
you get fastboot getvar all by:
-place phone in fastboot
-enter in fastboot getvar all right click,click mark,highlight in white,hit enter or right click to copy
you dump p7 by:
adb shell
su (if needed to get a #)
dd if=/dev/block/mmcblk0p7 of=/sdcard/mmcblk0p7
transfer the file on internal storage to your pc and upload it
im not trying to be a ****,but its not helpful to post "didnt work" if you screwed something up,or if your not willing to help find a solution. especially if others have found it to work on their same variant.
important:
from now on,i will need a copy of your cmd window as well if we want to get to the bottom of whats happening. some folks seem to be simply writing extra bytes,wich is screwing up the flag location. please make sure this shows an entire session,not just a last part where it looks correct. we cant figure it out if you only show part of what you did.
mine
or you can use revone
zaphodbeeb said:
or you can use revone
Click to expand...
Click to collapse
it is my understanding that revone does not work on hboots greater than 1.44,so you need to downgrade hboot to have that option.
use whatever means you wish,this is another way to skin the cat.
scotty1223 said:
it is my understanding that revone does not work on hboots greater than 1.44,so you need to downgrade hboot to have that option.
use whatever means you wish,this is another way to skin the cat.
Click to expand...
Click to collapse
I can use revone to do this also on 1.54 without a problem. This method is much easier however, and leaves no tracks. Any chance of a script to do this. More Kudos 2 u.
is it possible to do the same with the "Locked" "Relocked" ?
russel5 said:
is it possible to do the same with the "Locked" "Relocked" ?
Click to expand...
Click to collapse
It should, since the lock state is also part of the misc partition. it is just a different offset.
Can someone who has unlocked or relocked state provide me with a dump of mmcblk0p7 ?
russel5 said:
is it possible to do the same with the "Locked" "Relocked" ?
Click to expand...
Click to collapse
Yes. There is a thread for that here , and in the verizon and sprint forums
Sent from my HTC One VX using Tapatalk
theq86 said:
It should, since the lock state is also part of the misc partition. it is just a different offset.
Can someone who has unlocked or relocked state provide me with a dump of mmcblk0p7 ?
Click to expand...
Click to collapse
The lock flag is in p3, not p7. Again, there is a thread for that already
Sent from my HTC One VX using Tapatalk
wooow its cool :laugh: :good:
I will do it when i get s-off
scotty1223 said:
Yes. There is a thread for that here , and in the verizon and sprint forums
Sent from my HTC One VX using Tapatalk
Click to expand...
Click to collapse
can you give me the link for this thread pleace ?
killer18 said:
wooow its cool :laugh: :good:
I will do it when i get s-off
can you give me the link fot this thread pleace ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=46301380
Sent from my HTC One VX using Tapatalk
ok i am back now after s-off my phone
and i do every thing but the tampered banner is still there !!
what the problem ?
:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\alhomoud>cd c:\miniadb_m7
c:\miniadb_m7>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
FAXXXXXXXXXXXXXX device
c:\miniadb_m7>adb reboot bootloader
c:\miniadb_m7>fastboot devices
FAXXXXXXXXXXXXX fastboot
c:\miniadb_m7>fastboot reboot
rebooting...
finished. total time: 0.040s
c:\miniadb_m7>
Click to expand...
Click to collapse
Thank you. i was removed the tampered. HBOOT 1.54. Easy and fast. Thanks also for beaups!!
killer18 said:
ok i am back now after s-off my phone
and i do every thing but the tampered banner is still there !!
what the problem ?
:
Click to expand...
Click to collapse
Errr... Because you haven't execute the command to reset it yet? Read the first post carefully.
All you've done there is just checking connected device via fastboot command then reboot your phone, not resetting the tempered flag.
EDIT: quoted the first post.
scotty1223 said:
2)reset your "tampered flag"
enter the following:
adb devices
adb shell
su (if needed to get a # prompt)
echo -ne '\x00' | dd of=/dev/block/mmcblk0p7 bs=1 seek=4265988
(i would very strongly recomend you copy/paste this)
exit
(exit a second time if you need to to get back to a normal > prompt)
adb reboot bootloader
verify tamered is gone
Click to expand...
Click to collapse
Sent via HTC One™ using Tapatalk Pro
Is this guide somehow firmware dependatnt? - will this work for 3.57.401.500 ?
thanks
maarawoe said:
Is this guide somehow firmware dependatnt? - will this work for 3.57.401.500 ?
thanks
Click to expand...
Click to collapse
The flag location should not change,so it should work on any firmware.
Sent from my HTC One using Tapatalk
scotty1223 said:
The flag location should not change,so it should work on any firmware.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Works Thx!
I did the S OFF and was curious.
On the boot screen is some red writing about it being a development release etc etc. Is this for that also?
Thanks for any help.
zach181 said:
I did the S OFF and was curious.
On the boot screen is some red writing about it being a development release etc etc. Is this for that also?
Thanks for any help.
Click to expand...
Click to collapse
No, you need to flash a modified hboot in order to remove the red text, check the dev section
Jonny said:
No, you need to flash a modified hboot in order to remove the red text, check the dev section
Click to expand...
Click to collapse
Thanks. I'll go and have a read.
*this thread is for m8. it will NOT work on m7(or anything older). search your device general forum for a specific thread
if you have recently s-off'ed using an exploit that did not remove your tampered banner from the bootloader screen,then this thread is for you.
*note: if you are on hboot 3.19.0.0000 this thread will change software status: modified banner to: software status: official. to my knowledge,this banner is not completely removable (more info)
you do NOT need to downgrade your hboot. this simple adb command works without any scary hboot downgrades.
*you must be s off.
*you must have superuser installed
read this:
this will not work if your s on
the usual disclaimers:
i have tested this my my m8_ul t mobile variant,but use this info at your own risk. if it melts your phone into a little pile of aluminum goo,its not my fault.
credits
-beaups for schooling me on echo command protocol
-andybones for testing it on m7_wlv
*WorldIRC and brar.arsh for testing on m8
IF you are an advanced user with adb/fastboot set up and some basic knowlede of the cmd window,you can skip to #2
1)set up adb(windows 7 and lower)
-download this file
-install drivers: if you have htc sync installed,you should allready have drivers. if not,you can install htc sync,or install these modified htc drivers from revolutionary (driver mirror)
-unzip your miniadb_v1031.zip file. this is native funtionality in windows 7. you otherwise may need a utility such as "7-zip" to extract,or unzip it. place the unzipped folder onto the root of your C drive on your PC. root means the top level,not inside any folders. so just copy and paste,or drag and drop the folder onto C with everything else that is there. you may want to rename it to "miniadb_m7" since youll be putting some device specific files in here.
-open a command window. on windows 7,click the start bubble in the lower left and type "command" in the search box. xp i believe is similar or the same. doing this should open a small black command window.
-change to your miniadb_m7 directory. type the following at the prompt in your cmd window:
cd c:\miniadb_m7
your command promt should change to "c:miniadb_m7>" provided you: 1)unzipped the miniadb_v1031 zip file,and 2)put the folder on your c drive,and 3)entered the name of the folder correctly ("miniadb_m7" in this case)
-now make sure usb debugging is checked in developer options(you will need to turn it on first),and plug your phone into your PC with a usb cable
-make sure your phone is being recognized- type:
adb devices
if your drivers are installed correctly,this should return your phones serial number. you should hear the "found device" noises when you plug your phone in. if it starts installing drivers,wait for it to finish before typing the adb devices command.
if you get your serial number back,then enter this command:
adb reboot bootloader
this should take your phone to the "fastboot" screen,wich is white with colored letters. this is one mode of your bootloaders interactive modes. at the top youll see fastboot devices as confirmation youre in fastboot.
now enter:
fastboot devices
again,this should return your phones serial number. you should hear the "found device" noises when you plug your phone in. if it starts installing drivers,wait for it to finish before typing the adb devices command.
if you get your serial number back,you can enter the following to boot back to the phones OS:
fastboot reboot
and now,youve installed adb/fastboot and tested youre phones drivers. if at either spot,you have trouble and dont get your serial number back,there is some sort of connection issue. use these steps to troubleshoot:
troubleshooting connectivity issues:
-try a reboot of the PC
-try different usb cables and ports
-dont use a usb hub
-dont use usb 3.0
-make sure nothing capable of comunicating with the phone is enabled and running. htc sync,pdanet,easy tether,and even itunes have all been known to cause issues.
-windows 8 has been known to have issues. try a windows 7 or older machine
failing the above,
-i use these drivers for fastboot and adb(donwload and run as admin): http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe (mirror)
failing that,try manually updating the drivers in the following manner:
-put the phone in fastboot mode(select fastboot from the hboot menu)
-open device manager on the PC
-plug in phone,watch for it to pop up in device manager.
-update drivers with device manager,pointing the wizard to the extracted
driver download folder from above
note that you can check the connectivity of the phone,and make sure drivers are working by in the following manner:
-open cmd window. change to directory containing adb/fastboot utilities
-adb with the phone in the booted OS,usb debug enabled,enter:
adb devices in a cmd window
-fastboot with phone in fastboot,enter:
fastboot devices in cmd window
in either case,a properly connected phone with working drivers installed should report back the phones serial number.
Click to expand...
Click to collapse
this process,in your cmd window,should look something like this:
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Scott>[COLOR="red"]cd c:\miniadb_m7[/COLOR]
c:\miniadb_m7>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
FAxxxxxxxxxx device
c:\miniadb_m7>[COLOR="red"]adb reboot bootloader[/COLOR]
c:\miniadb_m7>[COLOR="red"]fastboot devices[/COLOR]
FAxxxxxxxxxx fastboot
c:\miniadb_m7>[COLOR="red"]fastboot reboot[/COLOR]
rebooting...
finished. total time: 0.037s
c:\miniadb_m7>
2)reset your "tampered flag"
enter the following:
adb devices
adb shell
su (if needed to get a # prompt)
echo -ne '\x00' | dd of=/dev/block/mmcblk0p6 bs=1 seek=5314564
(i would very strongly recomend you copy/paste this)
exit
(exit a second time if you need to to get back to a normal > prompt)
adb reboot bootloader
verify tamered is gone
your cmd window should look like this(red= my inputs,blue=additional comments):
Code:
c:\miniadb_m8>[COLOR="Red"]adb shell[/COLOR]
[email protected]_m8:/ $ su
su
[email protected]_m8:/ # [COLOR="red"]echo -ne '\x00' | dd of=/dev/block/mmcblk0p6 bs=1 seek=5314564[/COLOR]
ock/mmcblk0p6 bs=1 seek=5314564 <
1+0 records in [COLOR="Blue"][COLOR="red"]adb reboot bootloader[/COLOR]
c:\miniadb_m8>[COLOR="red"]fastboot reboot[/COLOR]
rebooting...
finished. total time: 0.022s
c:\miniadb_m8>
other useful threads:
lock/unlock without htcdev: http://forum.xda-developers.com/showthread.php?t=2708571
change mid without eng hboot: http://forum.xda-developers.com/showthread.php?t=2708581
if this does not work for you
*first reread this thread in its entirety. make sure you have met the prerequisites,and double check your code and make sure you have not forgotten a step,or screwed something up trying to type it (especially if using a terminal emulator),and check that you have not gotten any errors.
if youre still confident you did things correctly,you need to PM me:
1)the results of: fastboot getvar all
2)a link to an uploaded p6.
you get fastboot getvar all by:
-place phone in fastboot
-enter in fastboot getvar all right click,click mark,highlight in white,hit enter or right click to copy
you dump p6 by:
adb shell
su (if needed to get a #)
dd if=/dev/block/mmcblk0p6 of=/sdcard/mmcblk0p6
transfer the file on internal storage to your pc and upload it
im not trying to be a ****,but its not helpful to post "didnt work" if you screwed something up,or if your not willing to help find a solution. especially if others have found it to work on their same variant.
important:
from now on,i will need a copy of your cmd window as well if we want to get to the bottom of whats happening. some folks seem to be simply writing extra bytes,wich is screwing up the flag location. please make sure this shows an entire session,not just a last part where it looks correct. we cant figure it out if you only show part of what you did.
if you have other questions:
first and foremost: DO NOT quote this post in its entirety. doing so will result in your questions being ignored
next: please search the thread for answers before blindly jumping to the end and posting. by now its unlikely that you have experienced a unique issue
mine too
Will share my screens if you need.. Will try this shortly..
Sent from my HTC One_M8 using Tapatalk
I can confirm this works on M8! Thanks OP!
works on my dev edition m8
Worked perfectly on my at&t m8.
So this should work on international unlocked version?
Skickat från min HTC One_M8 via Tapatalk
E_n_T said:
So this should work on international unlocked version?
Skickat från min HTC One_M8 via Tapatalk
Click to expand...
Click to collapse
Yes. It should.
Sent from my HTC6435LVW using Tapatalk
scotty1223 said:
Yes. It should.
Sent from my HTC6435LVW using Tapatalk
Click to expand...
Click to collapse
Thanks. Then i perhaps should root now then. Been w8ing for this. ?
Skickat från min HTC One_M8 via Tapatalk
Edit: nevermind I got it.
Works like a charm on Rogers M8.
Worked
Thanks for this much appreciated!
Worked from android terminal emulator perfectly at&t m8
Sent from my HTC One_M8 using xda app-developers app
Just did it in terminal emulator. 20 seconds and done. Thank you. ?
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Great! Worked perfectly, thanks.
Also, does anyone know how to remove the red "development only" words that appear on the HTC screen? I think s-off makes this possible?
another sprint good to go, very much appreciated!
florelui001p said:
Great! Worked perfectly, thanks.
Also, does anyone know how to remove the red "development only" words that appear on the HTC screen? I think s-off makes this possible?
Click to expand...
Click to collapse
The only way to do this is with a custom hboot,wich basically replaces the text with all spaces.
Sent from my HTC PG09410 using xda app-developers app
scotty1223 said:
The only way to do this is with a custom hboot,wich basically replaces the text with all spaces.
Sent from my HTC PG09410 using xda app-developers app
Click to expand...
Click to collapse
And that would mean we'd have to flash/replace the hboot, yes? I've also seen people "mask" these flags. Unlocked bootloader can be masked as Locked.
Something like shown in here: http://forum.xda-developers.com/showpost.php?p=45364513&postcount=1
hidea said:
And that would mean we'd have to flash/replace the hboot, yes? I've also seen people "mask" these flags. Unlocked bootloader can be masked as Locked.
Something like shown in here: http://forum.xda-developers.com/showpost.php?p=45364513&postcount=1
Click to expand...
Click to collapse
correct,youll need a new hboot. its not something i personally do,or even understand. i like to proudly display my s off,unlocked bootloader,i dont understand the desire for it to show locked and s on. the usual argument is "needs to be stock" but a modified hboot can cause the next user issues down the road,and it is easy enuff to go back to 100% legitimate stock,IMO there is no excuse not to if you need to turn the phone or have warranty work done.
just my 2 cents
i rather like my red text as well
Please note, I can only speak with any degree of certainty about devices bought from Play / Moto. I cannot attest to the accuracy of this information for US carrier versions etc. Anything you do is at your own risk
Contents / Thread overview
Introduction
What is Fastboot?
What is adb?
How to install adb and fastboot
How to test adb and fastboot work
OK Gimme some useful fastboot commands please!
OK Gimme some useful adb commands please!
A little more about using Windows command prompt
Myth Busters
Introduction
adb and fastboot are very useful command line tools. They can be used from Windows, Linux or Mac to carry out tasks on your android device, such as moving and backing up files, rooting and restoring your phone to it's factory state. Understanding how to use these tools could save your phone when you get yourself in trouble. This is especially true of rooted users. Particularly those of you who are "new to the scene". You definitely should read and understand this thread before you do ANYTHING root related.
This thread is not intended to be a non-exhausted reference. It is merely here to give an overview of the most basic of basics
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is fastboot?
Fastboot comprises of 2 components.
1) Fastboot mode on the phone (The Bootloader)
2) Fastboot tool on your computer
Fastboot is a small command line tool that you can use from your computer whilst the phone is connected via USB and you are booted into the bootloader. The most common uses for fastboot are:
Unlocking the bootloader - needed as part of the rooting process
Flashing a custom recovery to the device - needed as part of the rooting process
Flashing factory images - used for saving / trestoring your device back to stock
Being able to do these 3 things are essential before rooting. Many new users skip learning these and use a toolkit to root. As a result, when they mess up and we try to explain what they need to do to fix their issues, it becomes very difficult for us to help as fastboot is not understood. It is YOUR responsibility to understand these things BEFORE you mess up.
What is adb?
adb is another small command line tool that stands for "Android Debugging Bridge". Again, it can be used from a computer connected via USB to your android device. It can be used whilst the device is booted into Android or (if you have a custom recovery), it can be used in recovery too, unlike fastboot (yes, adb and fastboot are NOT the same thing) which can only be used in the bootloader.
adb can be used to push files to (or pull files from) your phone. It can also be used to execute many of the commands available in Linux terminals (Or Android terminal emulators) on the device itself. We're not here to cover all these commands however. We just want to cover the basics.
How to install adb and fastboot
adb and fastboot are very easy to install and can be installed on Windows, Linux and MAC computers. The Windows install can be a little bit more complicated than the other 2 and may need additional drivers installing too.
Windows.
There is a very handy tool that can install adb and fastboot in 15 seconds. It is recommended that you use this to install adb and fastboot. Please see the link immediately below for that tool:
ADB, Fastboot and Drivers - 15 seconds ADB Installer - Really quick and easy way to install adb and fastboot (by @Snoop05). Download links are at the bottom of post 1.
This tool asks if you want to install adb and fastboot (to which you should answer Y) and then creates c:\adb\adb.exe and c:\adb\fastboot.exe
It then asks if you want to install it system wide .. This is asking to install for all windows users. < 15 second installer needs updating to SDK 23, which is required for latest Android versions.
Download the latest SDK (adb and fastboot) versions here: https://developer.android.com/sdk/index.html (Scroll down to SDK tools only) then download the Windows *Installer*.
Open the installer and select "Platform-tools" and install the packages. This should create "C:\Program Files (x86)\Android\android-sdk\platform-tools"
Now we want to set this path as a Windows Environment variable PATH to make the executables work system wide:
right-click computer > properties > advanced > environment variables.
under system variables click "path" and click "edit"
at the end of the line, add the below:
Code:
;C:\Program Files (x86)\Android\android-sdk\platform-tools
Please note, the semi-colon ; is VERY important.
You may also need to install drivers.
Here is a link to the Google USB Driver: DOWNLOAD THIS
Code:
To install on Windows 7:
- Ensure existing drivers are uninstalled first*
- Extract the zip to c:\adb (created earlier by the installer)
- Right-click "Computer" > Manage in windows and choose "Device Manager"
- Boot the Nexus 6 to the bootloader (Volume down + Power) and connect the USB Cable
- Watch for any new devices with exclamation marks appearing
- Right-Click the new device > Update driver software
- Choose the "browse" method and browse to c:\adb, find teh folder you extracted then follow the wizard to the end - using amd6 64 if you're on a 64 bit system and i386 if you're on a 32 bit system.
*To uninstall existing drivers, boot into Android and connect the USB cable. Monitor device manager for the device showing up. To uninstall the device, right-click it to uninstall it. At the prompt, ensure you also choose to delete the driver. Repeat this for bootloader and recovery.
Code:
To Install on Windows 8, you may need to additionally disable driver enforcement
- From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the - -- pop-out bar to appear, then click the Gear icon).
- Click ‘More PC Settings’.
- Click ‘General’.
- Scroll down, and click ‘Restart now’ under ‘Advanced startup’.
- Wait a bit.
- Click ‘Troubleshoot’.
- Click ‘Advanced Options’
- Click ‘Windows Startup Settings’
- Click Restart.
Once that is done, your Windows computer is configured for adb and fastboot.
In device manager, the device should show up as below, depending whether you are booted into recovery or bootloader...
Recovery - Android Device > Google Nexus 4 ADB Interface
Bootloader - Android Device > Google Nexus 4 Bootloader Interface
If it shows as something different, either you have existing drivers in the way or something went wrong.
Linux and Mac
Here is a really simple tool to install adb and fastboot on the above OS. The only expectation is you know how to open and run a terminal command. Please see the link immediately below:
Nexus Tools 2.2 (Featured by XDA) - adb and fastboot installer for Linux and Mac (by @corbin052198)
Once you have installed adb and fastboot from the above link, you're ready to go.
How to test adb and fastboot work
As previously mentioned, adb and fastboot are both command line tools. That means you must run these tools from command prompt (cmd in Windows) or Terminal (Linux and Mac).
Remember earlier, I mentioned that fastboot can only be used in bootloader? and adb can only be used in Android (or custom recovery - lets cover that later)? We can use the command "fastboot devices" and "adb devices to see if we have adb and fastboot working correctly.
Lets try it.
Boot your phone into android
Connect it to your computer via USB
Open cmd (start > type "cmd" on Windows) or Terminal (Mac/ Linux
Type in the windows "adb devices" and press enter
Here is what we don't want to see:
Notice how there is nothing underneath where it says "List of attached devices" That means it cannot see any device
Here is what we DO want to see:
We can see that there is now a device listed.
OK lets test fastboot. Unplug the USB and turn off the phone. When it is off, hold down Volume down + power until you feel the vibrate. You will now be in the bootloader. Reconnect the USB cable.
In the same window (cmd or terminal) we're going to now type "fastboot devices".
Again, here is an example of what we don't and do want to see:
If in both modes, you can see your devices "Serial Number", then you know they are both working.
Please note that if you cannot get adb and fastboot to work "system wide", you can open the command prompt to the location of the adb and fastboot executables exist and try from there.
OK Gimme some useful fastboot commands please!
Here are some of the most useful fastboot commands you will come across. Fastboot is used mostly for flashing images to the devices partitions on the internal memory.
Code:
fastboot oem unlock
This unlocks your bootloader and allows you to flash a recovery to root. WARNING, this will wipe your device. Rooting the N6 is essentially unlocking the bootloader, flashing a recovery and then putting the SuperSU zip on your sdcard and flashing it via the recovery. This thread covers rooting: [HOW-TO] The Nexus 6 All-In-One Beginner's Guide by @xBeerdroiDx
Code:
fastboot flash recovery recovery.img
This will flash a recovery.img to the recovery partition. The command is broken down into "fastboot flash" (what to do) "recovery" (where to flash to) "recovery.img" what to flash there. In the terminal or command prompt, you cannot just type "recovery.img" though. It has to be the path to where the recovery image is. For example, if my recovery image is on my desktop, I would have to type:
Code:
fastboot flash recovery c:\users\rootsu\desktop\recovery.img
It is worth noting, that it IS case sensitive, meaning if your file is called Recovery.img, you must type the capital R...
Other things you would flash:
Code:
fastboot flash system system.img
fastboot flash boot boot.img
These will flash the system image (ROM) and boot image (kernel) as you would if you were returning to stock.
A full guide to returning to stock can be found here: [TUTORIAL][GUIDE][HOW TO] Flash Factory Images || Unroot || Relock bootloader by @Mr hOaX
You can also boot into a recovery.img without flashing it...
Code:
fastboot boot c:\users\rootsu\desktop\recovery.img
which is "fastboot boot" (what to do) "c:\users\rootsu\desktop\recovery.img" what to do it with. As you may have noticed, we did not define the recovery partition in this command, that's because we're not flashing it....
OK Gimme some useful adb commands please!
At the moment, we are going to assume you have a custom recovery and you have booted into recovery. The reason for this is using adb in recovery can be much simpler.
Here are some useful scenarios for using adb.
Backup your sdcard to your PC
Code:
adb shell
mount data
exit
adb pull data/media/0 c:\MyBackup
**Please note, some recoveries may "mount data" automatically on boot, so don't be disheartened if you get an error stating device or resource busy. This probably just means you can't mount what is already mounted**
/data/media/0 is the real location of /sdcard for your information. Also referred to as "The mount point". What we have done here is "adb pull" (what to do) "data/media/0" (what to move) "c:\MyBackup" (where to move it to)
Push a zip file from your PC to your sdcard (useful if you wiped your sdcard and rom)
Code:
adb shell
mount data
exit
adb push c:\rom.zip data/media/0
What we have done here is "adb push" (what to do) "c:\rom.zip" (what to move) "data/media/0" (where to move it to)
You can of course also use adb to push and pull files to and from /system too. You just need to:
Code:
adb shell
mount system
exit
I mentioned earlier that using custom recovery is much easier for adb than whilst booted into Android. You need to ensure you have a kernel that allows insecure adb before you do anything with system and data partitions. You also need to ensure that USB debugging has been enabled in developer options.
For example, to mount system to pull files whilst android is running you have to:
Code:
adb root
adb shell
mount -o rw,remount /dev/block/platform/msm_sdcc.1/by-name/system /system
...which is clearly a little bit more involved, so I recommend you use recovery for adb push and pull. You can find more detailed information on adb here: http://developer.android.com/tools/help/adb.html
A little more about using Windows command prompt
One thing to understand is that like Windows, command prompt (cmd.exe) works with directories (or folders if you like). The Linux and Mac terminals are the same, but most linux users, we expect you would already know this.
Here you will see I have downloaded a recovery image that I want to flash using fastboot.
As you can see, the recovery.img is located in C:\users\rootSU\Desktop
Usually when you open the command prompt from the start menu, or run command, the command prompt will default to your user location as seen below:
So lets try and fastboot flash recovery recovery.img...
It fails with a not-too-accurate error message. It has failed because you have not told it where the recovery image is. It assumes it is in the directory as listed in the prompt
So, how do we deal with this? Well, there are 3 ways.
1) We tell the command prompt where the recovery.img actully is in the command itself
Success! As you can see, we have told the command that the location for the file is Desktop\recovery.img
2) We can change the directory in command prompt to the directory where the file is. In this example, we change directory to "Desktop". The change directory command is "cd " or in this case "cd Desktop"
3) ...and possibly the simplest method. We hold shift whilst we right-click on the folder we want to change directory to, and directly open a command prompt there:
Another point to make with command prompt or terminals, is if you do a particular command, it is "pre-programmed" to "expect" a particular format of that command.
For example, we know that adb push as a command expects after it . This means the command is actually
Code:
adb push
BUT if you put something AFTER , for example -
Code:
adb push somethingelse
, it will assume that the "somethingelse" is a bad parameter, and the command will fail. It will probably display (or "print" which is the technical term in a terminal) a helpful guide of how the command should be used instead of trying to run the command which it does not understand.
You're probably wondering why I am telling you this. Well quite simply, it is a warning about folder names. Imagine you have c:\users\rootSU\My Documents as a folder. You assume the command is then
Code:
adb pull /data/media/0 c:\users\rootSU\My Documents
but it is not... There is a space in between My and Documents. What you have actually done is
Code:
adb pull Documents
because it uses a space to signify the end of a command or parameter. It is best to avoid using folders with spaces in them. Avoid as much as you can. In the event it is unavoidable (Although when is it ever>) then please surround the path with quotation marks,
Code:
adb pull /data/media/0 "c:\users\rootSU\My Documents"
so that way, it sees everything between the " " as a single parameter.
Myth Busters
Myth 1: You need USB debugging on to use adb and fastboot
If you cannot boot into Android, it doesn't matter. You DO NOT need USB Debugging turned on to use adb outside of android. USB Debugging is an Android ONLY setting. Fastboot obviously also does not need debugging either as this too is outside of Android
Myth 2: to adb push or fastboot flash files, they must be in the same folder as adb or fastboot executables. Sorry but this is rubbish. You can pass the full path of the image you're flashing or file you're pushing in the command and fastboot / adb can be called system wide if you've set them as an environment variable or used the 15 second installer
thanks(im out of thanks). but ill be back to leave one here!!!!!
simms22 said:
thanks(im out of thanks). but ill be back to leave one here!!!!!
Click to expand...
Click to collapse
No worries. Just putting it here for info. It's not a new work, just a slightly amended version of my N5 thread. No need for thanks
rootSU said:
No worries. Just putting it here for info. It's not a new work, just a slightly amended version of my N5 thread. No need for thanks
Click to expand...
Click to collapse
it was up in the n5 threads before, and was needed here. but its here now as well, so thank you
Good guide. Needs to be a sticky. In fact, I think every device general forum should have a sticky like this. Would have saved me a lot of grief back when....
Excellent update.
Very good to see. I'm sure lots of people will be sending noobs here for the basics.
Up to your usual helpful, good work I see.
rootSU said:
This tool asks if you want to install adb and fastboot (to which you should answer Y) and then creates c:\adb\adb.exe and c:\adb\fastboot.exe
It then asks if you want to install it system wide (to which again, you should answer Y)... This then allows you to type adb commands in the command prompt without having to open a particular directory first. You may or may not understand what I mean when I say that, but take it from me, its much more convenient and easier to use this way.
Click to expand...
Click to collapse
Y option = System-wide = install to "C:\adb" and add path for system variable - This mean you can use it by any account on your pc.
N option = Current user only = install to "C:\Users\[YOUR USERNAME]\adb" and add path for user only - Only user account used for installation can actually use it.
So if you say Y or N you will be still able to use it from any directory with cmd.
rootSU said:
It will also ask if you want to install device drivers. Actually, say N to this as we're going to cover that next, using the google USB drivers
Here is a link to the Google USB Driver: DOWNLOAD THIS
Click to expand...
Click to collapse
Drivers in my installer are the one from the link you posted here. I'm not using any modified drivers, just the one that come with SDK. And they are also digitally signed.
I hope you will fix these But still nice work, beginners should understand it :good:
Snoop05 said:
Y option = System-wide = install to "C:\adb" and add path for system variable - This mean you can use it by any account on your pc.
N option = Current user only = install to "C:\Users\[YOUR USERNAME]\adb" and add path for user only - Only user account used for installation can actually use it.
So if you say Y or N you will be still able to use it from any directory with cmd.
Drivers in my installer are the one from the link you posted here. I'm not using any modified drivers, just the one that come with SDK. And they are also digitally signed.
I hope you will fix these But still nice work, beginners should understand it :good:
Click to expand...
Click to collapse
Thanks for the info. I thought system wide meant it was putting it as a path environment variable. Reason I didmt use the drivers from your tool originally is (well I wrote this thread for N5 originally) they didnt work so had to install the universal naked driver. But if yours are the same as the ones linked, I can update that.
rootSU said:
Thanks for the info. I thought system wide meant it was putting it as a path environment variable. Reason I didmt use the drivers from your tool originally is (well I wrote this thread for N5 originally) they didnt work so had to install the universal naked driver. But if yours are the same as the ones linked, I can update that.
Click to expand...
Click to collapse
Path is added in both cases.
Sooo I need a little help here. I followed the directions to unlock the bootloader and everything went good. I did the CF auto-root, and the phone booted back up as normal. Now, I was trying to flash the M preview, and all of a suddon now my phone isn't recognized in adb. You posted a pic of what we don't want to see when testing for adb, but you don't say how to fix it if we run into the problem. Any way to get it to recognize my phone again so I can get this build on?
papeshfoo said:
Sooo I need a little help here. I followed the directions to unlock the bootloader and everything went good. I did the CF auto-root, and the phone booted back up as normal. Now, I was trying to flash the M preview, and all of a suddon now my phone isn't recognized in adb. You posted a pic of what we don't want to see when testing for adb, but you don't say how to fix it if we run into the problem. Any way to get it to recognize my phone again so I can get this build on?
Click to expand...
Click to collapse
Can you be very specific with your issue please?
papeshfoo said:
Sooo I need a little help here. I followed the directions to unlock the bootloader and everything went good. I did the CF auto-root, and the phone booted back up as normal. Now, I was trying to flash the M preview, and all of a suddon now my phone isn't recognized in adb. You posted a pic of what we don't want to see when testing for adb, but you don't say how to fix it if we run into the problem. Any way to get it to recognize my phone again so I can get this build on?
Click to expand...
Click to collapse
Android M no like root, you'll either have to live with stock or wait for chainfire to do his thing.
This all worked well until I had to find my device in the cmd prompt. It listed no devices when I typed in "ADB Devices". The issue I found was with the ADB Interface Driver. I uninstalled it and reinstalled it thinking it might've been a driver issue, but it still wouldn't work. I tried the "Uninstall driver" then "scan for hardware changes" but that didn't work. Finally I found the universal ADB driver and tried using that. STILL nothing. I figured that, because I don't have my device's driver installed, it might've been that, so I tried to DL it and yet again, nothing. I have a Kyocera Hydro Life, if that helps. Also, I tried looking through the "update driver manually" in order to update the driver software by looking through the different ADB interfaces that it had but my Kyocera driver wasn't there. Is it supposed to be there or do I just use one of the ones provided?
I checked my programs and apps and it says that the Kyocera usb driver was installed. Did I do something wrong?
ScottyChaos said:
This all worked well until I had to find my device in the cmd prompt. It listed no devices when I typed in "ADB Devices". The issue I found was with the ADB Interface Driver. I uninstalled it and reinstalled it thinking it might've been a driver issue, but it still wouldn't work. I tried the "Uninstall driver" then "scan for hardware changes" but that didn't work. Finally I found the universal ADB driver and tried using that. STILL nothing. I figured that, because I don't have my device's driver installed, it might've been that, so I tried to DL it and yet again, nothing. I have a Kyocera Hydro Life, if that helps. Also, I tried looking through the "update driver manually" in order to update the driver software by looking through the different ADB interfaces that it had but my Kyocera driver wasn't there. Is it supposed to be there or do I just use one of the ones provided?
I checked my programs and apps and it says that the Kyocera usb driver was installed. Did I do something wrong?
Click to expand...
Click to collapse
Try a different USB port. If that doesn't work try a different USB cable. If that also doesn't work, you could try disabling driver signature checking for Windows.
If those don't work, try this thread > http://forum.xda-developers.com/showthread.php?t=1583801
cam30era said:
Try a different USB port. If that doesn't work try a different USB cable. If that also doesn't work, you could try disabling driver signature checking for Windows.
If those don't work, try this thread > http://forum.xda-developers.com/showthread.php?t=1583801
Click to expand...
Click to collapse
EDIT: I also forgot to mention that the error code that came up while I was in the dev manager was compatibility error code (28) when I clicked on "Device ADB interface".
ScottyChaos said:
EDIT: I also forgot to mention that the error code that came up while I was in the dev manager was compatibility error code (28) when I clicked on "Device ADB interface".
Click to expand...
Click to collapse
Error 28 means drivers not installed. Try the driver help thread that I linked above.
---------- Post added at 12:33 PM ---------- Previous post was at 12:04 PM ----------
cam30era said:
Error 28 means drivers not installed. Try the driver help thread that I linked above.
Click to expand...
Click to collapse
@ScottyChaos,
Just a fundamental question: I assume you have enabled "Developer Options" in Settings, and then checked "enable USB debugging"?
---------- Post added at 12:39 PM ---------- Previous post was at 12:33 PM ----------
[/COLOR @ScottyChaos,
Here is a thread that you might find interesting > http://forum.xda-developers.com/android/help/metro-pcs-kyocera-hydro-life-rooted-t2870678
Windows 10 device driver management is even more locked down then windows 8. I got two of the three drivers loaded but when going into adb mode on the phone through recovery it just disappeared out of the device manager. I had to unplug and plug in while in that mode to trigger a unloaded driver in the device manager. Once there I had to force the adb driver manually with the nasty windows driver warning and all. Once I did that I could see the device in adb mode and sideload my marshmallow OTA. woot!
I decided to drop a thanks bomb...
ADB is good.
But that fastboot.
Seriously, its ONE command. OK, a few different arguments to use.... But it is so easy, and so powerful. People are afraid to mess up on command line, but its actually way harder to type the wrong thing out then to click the wrong thing.
LEARN IT. Forget your toolkit.
You can fix almost anything, Its not too hard for you. It may be new... YOU CAN DO IT.
Also, I have to say it... Its not going to help anyone, but it will keep me from punching something. ADB and Fastboot... Not the same. You don't ADB a new system image....