after updation to CM12, yesterday i observe that my mobile is not turned on. when i press the power button the lights at the bottom home and return buttons turned on but the screen is not turned on. I tried to charging the mobile. it gets charged and when i press power along with the volume buttons mobile gets restarted screen is also activated with the display of Cyanogen. but again same problem. i tried to dial from another mobile to yureka. I got the call but screen is not turned on. so that, i was unable to attend a lot of calls. i think its not a hard ware problem. might be some software problem. how do i fix this one........
Related
Anyone know how to stop an accidental clicks or other screen presses from taking place when I've got the phone to my face during a call?
Si.
I use a freeware app called Screen Off, download it here:
http://www.handango.com/PlatformPro...latformId=2&N=96806&productId=125781&R=125781
Basically when I make a call or answer a call I have screen off assigned to a button, so I can then press the button to turn the screen off. To turn the screen back, just press the power on button.\
Hope this helps,
Or maybe you could simply turn PDA off with a single power button press...and when you're finished simply turn it on. Remember that the radio is always running (unless you hold the power button for 5s).
My screen turns off automatically after about 20 seconds when on a call - haven't set it to do this - in fact can't even find an option - it just seems to be the default setting. The only way to turn it back on is to press the green or red buttons, or just flick the volume control either way - works for me. (O2 XDA Mini s)
S.
Macrinus - thx that works a treat.
That's weird, your screen turning off after 20 seconds, mine turns off as configured in "Turn backlight after..." and "Turn off device...".
macrinus said:
That's weird, your screen turning off after 20 seconds, mine turns off as configured in "Turn backlight after..." and "Turn off device...".
Click to expand...
Click to collapse
Yeah, it is weird - bit annoying, but sensible really to save the power - Perhaps its just the device turning off then, with the phone still running .... comes back to life with a flick of the volume though - touching the screen won't re-activate it. Will have to time it a bit more closely !
S.
Radio on screen off
I too turn the device off when I'm on a call (although I only discovered I could without ending the call this morning). Otherwise, my ear activates the Start menu.
Doh!
if only the backlight is turned off, the screen WILL still react to face contact!
I understand that either the device (less the phone side!) via power button, or the screen must be turned off via an utility.
It may exist, but I know no proggie able to lock the touchscreen without turning it off!
(pitty, my axim X50v can lock the screen without turning it off via a Hw sliding button9
I have had the Touch 3G for nearly a year now and for the last 3 months I have had this recurring problem which is fixed with a hard reset but will recur again after about 6 weeks. The symptoms are:
1. When turning on, the backlight dims just before the HTC flash screen and startup sound (when it says "Smart Mobility")
2. Touching the screen doesn't bring the backlight back on.
3. Pressing the power button doesn't turn the screen off from this dimmed state, but after pressing touching the screen will turn the backlight back on.
4. Pressing the power button again will now turn off the screen, but pressing it again won't turn the screen back on! If I call it from another phone, the vibrator goes on but it doesn't ring, the screen stays off and you can't answer the call. If you hang up on the other phone it keeps vibrating and you need to do a soft reset to stop it.
If I do a hard reset the symptoms are gone and reinstalling the exact same software doesn't cause the problems immediately but withing a month or so it happens again. All I did just prior to these problems was use TomTom a bit more than usual, but otherwise nothing different. I have used TaskManager to see if there is anything weird running in the background but it all looks fine. I have had a cursory look through the registry but also can't find anything?
Any advice would be appreciated.
pdiaz said:
I have had the Touch 3G for nearly a year now and for the last 3 months I have had this recurring problem which is fixed with a hard reset but will recur again after about 6 weeks. The symptoms are:
1. When turning on, the backlight dims just before the HTC flash screen and startup sound (when it says "Smart Mobility")
2. Touching the screen doesn't bring the backlight back on.
3. Pressing the power button doesn't turn the screen off from this dimmed state, but after pressing touching the screen will turn the backlight back on.
4. Pressing the power button again will now turn off the screen, but pressing it again won't turn the screen back on! If I call it from another phone, the vibrator goes on but it doesn't ring, the screen stays off and you can't answer the call. If you hang up on the other phone it keeps vibrating and you need to do a soft reset to stop it.
If I do a hard reset the symptoms are gone and reinstalling the exact same software doesn't cause the problems immediately but withing a month or so it happens again. All I did just prior to these problems was use TomTom a bit more than usual, but otherwise nothing different. I have used TaskManager to see if there is anything weird running in the background but it all looks fine. I have had a cursory look through the registry but also can't find anything?
Any advice would be appreciated.
Click to expand...
Click to collapse
Sounds like it's going all haywire. If you've had it less than a year, I'd send it in real quick. Sounds more like a hardware problem.
I don't think it is hardware as a hard reset fixes it...it just recurs down the track. I have done a hardrest and reinstalled all my apps and it is working great again but I was wondering if I should be checking somewhere in the registry for an aberrant setting. I am u using a backup image program so at least when it happen again I an restore my system more simply.
But then again, all the symptoms you mentioned point to a hardware defect. You could try to find a tweak, but like all electronic devices, it's the luck of the draw. Try emailing HTC and see what they say.
Rom: Olyfr sbf upgraded to 4.1.5.7 from 4.1.2.6 via OTA
Not rooted
I have not yet modified the power button.
'Cause I set up the fingerprint unlock,Im used to swiping my finger after press the power button.
after pending or standing by a while(maybe),It vibrates once after my unlocking through scanning fingerprint.But!!!! The screen is still black!!!
Meanwhile,touching the four buttons on the bottom,it still vibrates!
And waiting for seconds,Screen on~~~~~
Symptoms sound a lot like my Bell Vibrant before it died after the Froyo upgrade.
Have you tried resetting your phone yet?...
Okay,I have flash it to 4.157sbf,and temporarily nothing goes wrong
I have the same symptoms. Sometimes when I push the power button it takes 3-5 seconds or more for the screen to light up. I did a power off and on and it works better. Not sure what is causing this but it is annoying.
I've had this on.both my atrixes and it seems to.resolve itself as the phone gets older
Sent From My Gibgerblurred Phone
I have had the same issue on mine. It occurs intermittently. Not always, but sometimes. And when the screen is turned off, I push the power button and nothing happens for about 3-5 seconds. Sometimes longer.
I do also have the fingerprint security feature on, though I am not sure if that that has something to do with it. However there is another problem with the fingerprint security.
Sometimes I want to check the time so I just turn on my screen and quickly turn it back off. But the screen turns right back on cuz it recognized my click as a fingerprint. However since it is too short to be recognized, it just turns my screen back on and says to try again. I try to turn the screen off again and the same thing. This also happens on occasions.
They need to make the power button better so that ways it does not recognize a screen turn off as a fingerprint swipe.
I have had similar problems. Rebooting has usually fixed them, at least for a while
I've got a strange problem with my Sprint Galaxy Note 3.
What's happening is that randomly when I hit the power to turn the screen back on, it will do nothing then the screen will stay blank. The phone clearly still works because if I'm on a call or listening to music it will still keep playing and the volume and other buttons continue to work.
When that happens I hold down the power to turn the phone off and then on and it boots up normally.
Rarely what will happen is the same behavior except the screen will go strangely green after I hit the power button, making the phone unusable until an off/on.
This happens sometimes multiple times a day, sometimes days without happening.
Phone is rooted, running OC5 on Android 5.0. Problem has been happening for months. Haven't made any system upgrades or installed any major apps so that isn't it. I'm thinking it is some kind of loose pin/wire but don't want to crack the phone open without a plan.
Any help appreciated!
You are in the wrong forum .
Go to Sprint forum .https://forum.xda-developers.com/galaxy-note-3
Hello guys, my Nokia 6.1 Plus has developed a weird problem. When I turn on the phone the screen lights up as normal, displaying the androidone logo followed by the NOKIA logo before proceeding to the homescreen where it operates as normal. However, when I press the power button to turn the display off or when the display times out and goes off it doesn't wake up. It remains dark when I double tap on the screen or when I press the power button. The screen turns on but remains dark as I can feel it vibrate and respond to touch when I touch anywhere on the screen. I basically have to restart the phone to get it working again. The phone is basically unusable as I can't have the screen stay on all the time for me to use it.
What might be causing the problem and what can I do to remedy it?
Try to backup your important data and perform a factory reset.
May b it's hardware problem