Related
I recently rooted my phone just to install an app to let me log some issues I'm having with my phone and unfortunately I can't find the problem. I'm going to send in my galaxy S4 to be repaired by Samsung but I want to ensure that they don't know that I rooted my phone. I unrooted the phone using odin and flashed the stock firmware to the phone. In the phone's settings it says "Official" for device status and when I boot the phone into download mode the Current Binary Says: "Samsung Official" and the System Status says "Official". The unrooting guide I used advised me to use Triangle Away to reset the flash counter. However, even when the phone was rooted, the current binary said "Samsung Official" so I decided to go ahead and unroot it without resetting the flash counter. I never flashed a custom rom to the phone. The only thing I did was root it. So, since the current binary said "Samsung Official" before and after unrooting the phone, am I ok to send it in? I'd rather not root the phone again just to reset the counter when it already says "Samsung Official".
Nor did I install a custom recovery.
Anyone?
theloneranger08 said:
Anyone?
Click to expand...
Click to collapse
Factory reset and you should be good
tyshemi said:
Factory reset and you should be good
Click to expand...
Click to collapse
Do I need to do a factory reset even if it already says "Samsung Official". I thought that the only time you need to do a factory reset is if your phone gets stuck in a boot loop.
Lol I would before you send it back but you did the steps correctly so your good either way
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
tyshemi said:
Lol I would before you send it back but you did the steps correctly so your good either way
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
Click to expand...
Click to collapse
What I'm confused about is that Motochopper is supposed to trip the flash counter but it didn't or at least it didn't appear that it did...
It shouldn't change the binary counter should have just changed the Samsung status is all only flashing Roms that aren't stock from ATT or Samsung should increase binary! If you boot into boot loader does it say official and if so your golden brah
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
tyshemi said:
It shouldn't change the binary counter should have just changed the Samsung status is all only flashing Roms that aren't stock from ATT or Samsung should increase binary! If you boot into boot loader does it say official and if so your golden brah
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
Click to expand...
Click to collapse
By boot loader do you mean download mode because the recovery mode doesn't say anything? In download mode it says "Samsung Official" for current binary.
theloneranger08 said:
By boot loader do you mean download mode because the recovery mode doesn't say anything? In download mode it says "Samsung Official" for current binary.
Click to expand...
Click to collapse
Lol yea that's what i ment too many phones you should be good to go :cyclops:
Don't get your undies all in a bunch. You're good to go if it all says official.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
tyshemi said:
Lol yea that's what i ment too many phones you should be good to go :cyclops:
Click to expand...
Click to collapse
Ok and you are sure about motochopper not triggering the counter? Apparently, the Galaxy S4 doesn't show the flash counter in download mode, and only shows the current binary. Is it possible for the current binary to say "samsung official" but that flash counter to be 1? Of course, I could reroot, install Triangle Away and it would show me the flash counter, but I'd rather not go through all of that again if I don't have to...
theloneranger08 said:
Ok and you are sure about motochopper not triggering the counter? Apparently, the Galaxy S4 doesn't show the flash counter in download mode, and only shows the current binary. Is it possible for the current binary to say "samsung official" but that flash counter to be 1? Of course, I could reroot, install Triangle Away and it would show me the flash counter, but I'd rather not go through all of that again if I don't have to...
Click to expand...
Click to collapse
Buddy in my opinion I'd say your gtg :laugh::laugh:
tyshemi said:
Buddy in my opinion I'd say your gtg :laugh::laugh:
Click to expand...
Click to collapse
haha ok thanks. I was a little paranoid so I actually ended up rerooting my phone, installing Triangle Away and just like you said, Triangle Away said the flash counter was 0 and the current binary said "Samsung Official" so I unrooted my phone and now I'm good to go. Now I've got peace of mind though. haha
theloneranger08 said:
haha ok thanks. I was a little paranoid so I actually ended up rerooting my phone, installing Triangle Away and just like you said, Triangle Away said the flash counter was 0 and the current binary said "Samsung Official" so I unrooted my phone and now I'm good to go. Now I've got peace of mind though. haha
Click to expand...
Click to collapse
It's better to have a piece of mind lol but I was 99.999999% sure you were fine but anyhow glad your good :good:
tyshemi said:
It's better to have a piece of mind lol but I was 99.999999% sure you were fine but anyhow glad your good :good:
Click to expand...
Click to collapse
Also, for some odd reason, the superuser app was still there when I unrooted. Of course it no longer worked and I promptly uninstalled it. I've read that it will sometimes come back if the phone is reset though...
theloneranger08 said:
Also, for some odd reason, the superuser app was still there when I unrooted. Of course it no longer worked and I promptly uninstalled it. I've read that it will sometimes come back if the phone is reset though...
Click to expand...
Click to collapse
Make sure you use full unroot in the super user then uninstall from play store then reboot and see!
tyshemi said:
Make sure you use full unroot in the super user then uninstall from play store then reboot and see!
Click to expand...
Click to collapse
I didn't unroot using the superuser. I put the phone in download mode and flashed stock firmware to it.
theloneranger08 said:
I didn't unroot using the superuser. I put the phone in download mode and flashed stock firmware to it.
Click to expand...
Click to collapse
Your good buddy leave it be now and relax its a done deal good efforts on solidifying the stock state
tyshemi said:
Your good buddy leave it be now and relax its a done deal good efforts on solidifying the stock state
Click to expand...
Click to collapse
haha alright I appreciate the help.
Hello developers.
I'm trying to reroot my phone after the latest 4.3 update via ODIN for my Indian handset.
I'm trying using CF-AutoRoot via ODIN and the it says PASS and the phone restarts normally as it should but the root is simply not happening.
there were 2 android 4.3 updates for my device and i installed the latest (you can see the post title for the exact version)
after everything completed properly i simply tried CF-AutoRoot via ODIN and nothing is happening.
Till 4.2.2, it got rooted properly without such or any other problems.
Kindly assist me out in getting my phone rooted.
Regards.
Here too
avineshwar said:
Hello developers.
I'm trying to reroot my phone after the latest 4.3 update via ODIN for my Indian handset.
I'm trying using CF-AutoRoot via ODIN and the it says PASS and the phone restarts normally as it should but the root is simply not happening.
there were 2 android 4.3 updates for my device and i installed the latest (you can see the post title for the exact version)
after everything completed properly i simply tried CF-AutoRoot via ODIN and nothing is happening.
Till 4.2.2, it got rooted properly without such or any other problems.
Kindly assist me out in getting my phone rooted.
Regards.
Click to expand...
Click to collapse
Yep, I can´t re-root it again it seems the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar its not working for the i9500XXUEMJ8 versión, well time to wait to an updated CF-Auto Root :crying::crying::crying:
I9500XXUEMJ5 root working (almost working)... i cant run some app, without root all apps working great ;/
Weird. I rooted using CF Auto Root after flashing 4.3 MJ8, it always worked! I never did OTA update though, always used Odin and full wipe.
avineshwar said:
Hello developers.
I'm trying to reroot my phone after the latest 4.3 update via ODIN for my Indian handset.
I'm trying using CF-AutoRoot via ODIN and the it says PASS and the phone restarts normally as it should but the root is simply not happening.
there were 2 android 4.3 updates for my device and i installed the latest (you can see the post title for the exact version)
after everything completed properly i simply tried CF-AutoRoot via ODIN and nothing is happening.
Till 4.2.2, it got rooted properly without such or any other problems.
Kindly assist me out in getting my phone rooted.
Regards.
Click to expand...
Click to collapse
The rooting worked so far for me. Have you enabled KNOX? They enhanced the security features and as far as I heard KNOX-enabled devices can't get full root. Verify whether it is enabled or not. I'm not sure whether the user enables it or not but that may be the reason. I'm also not sure whether this KNOX security really affects I9500 models. I9505 models are definitely affected.
jujuburi said:
Weird. I rooted using CF Auto Root after flashing 4.3 MJ8, it always worked! I never did OTA update though, always used Odin and full wipe.
Click to expand...
Click to collapse
Probably I never full wiped.
The apps and all other data is retained (normally all is retained when we update rom via odin).
Factory reset (full wipe) was never required earlier to get root to work.
Knox is not on from my side though I get some notifications always that some app tried to access something and Knox blocked that. But I guess that is something else because we need to manually activate Knox after opening the Knox app.
Sent from my GT-I9500 using xda app-developers app
kci83 said:
I9500XXUEMJ5 root working (almost working)... i cant run some app, without root all apps working great ;/
Click to expand...
Click to collapse
It did worked for me too but only at times.
When I updated rom switcher app, root was gone and it never happened again!
Sent from my GT-I9500 using xda app-developers app
anyone with any solution for this?
anyone with any solution for this?
Solved!
Sent from my GT-I9500 using xda app-developers app
what was the solution? did you need to do a fullwipe? or used another method for rooting?
im on 4.2.2 MG9 and would like to update to 4.3 and have root without the know issue.
thanks.
Backup and Factory reset and cache clear after updating to 4.3
Then you'll get stock Samsung 4.3
Follow the same method to root (auto root) or alternatively flash super su via cwm/twrp/stock recovery.
resitm said:
what was the solution? did you need to do a fullwipe? or used another method for rooting?
im on 4.2.2 MG9 and would like to update to 4.3 and have root without the know issue.
thanks.
Click to expand...
Click to collapse
avineshwar said:
Backup and Factory reset and cache clear after updating to 4.3
Then you'll get stock Samsung 4.3
Follow the same method to root (auto root) or alternatively flash super su via cwm/twrp/stock recovery.
Click to expand...
Click to collapse
Thank you. Will this trip the knox thing?
After using CF-AUto root you need to update Super SU App on first boot.
Then Open SuperSU app and choose to install SU Binary without using a custom recovery.
Then reboot.
Then install Titanium backup pro and use it to free all Knox related files.
There are 7 of them and you need to remove all of them.
Remember you need to install a custom recovery to install busybox. (atleast in my case)
Install http://forum.xda-developers.com/showthread.php?t=2489234 via ODIN.
Once you are on custom recovery.
Use busybox installer to install busybox.
reboot.
You are done.
resitm said:
Thank you. Will this trip the knox thing?
Click to expand...
Click to collapse
No mate.
Wait for a future update to trip that.
In the mean time, I'm trying to trip that since it isn't very difficult just lazy to try everything since everytime 1 thing fails, I need to restore the whole data and if takes much of my bandwidth.
Hope you understand.
And the device status will also remain custom.
P.S. Touchwiz UI from Samsung will hang on a later date due to some app compatibility issue (I'm not sure which app but I can tell a large set of apps and it will hang due to any one from that list) so it is preferred to shift to some other launcher on pre hand.
Sent from my GT-I9500 using xda app-developers app
thank you both avineshwar and ajhavery.
i really wanted to update but i guess i am going to wait for a while. lots of issues seem to be happening once rooted. also dont want to lose warranty with the knox thing.
it seems the custom roms such as arrow and crash also have sound issues, FC issues on some apps.
i guess ill wait and see. maybe once the nexus 5 is out i can sell the i9500 and get the nexus 5.
resitm said:
thank you both avineshwar and ajhavery.
i really wanted to update but i guess i am going to wait for a while. lots of issues seem to be happening once rooted. also dont want to lose warranty with the knox thing.
it seems the custom roms such as arrow and crash also have sound issues, FC issues on some apps.
i guess ill wait and see. maybe once the nexus 5 is out i can sell the i9500 and get the nexus 5.
Click to expand...
Click to collapse
Waiting is good.
Don't sell your phone though (for obvious reasons).
You've got much to explore.
When it comes to selling, you'll get money whenever you do that so keep that option as your last bet.
Custom roms aren't really preferred from my side until you are a die hard modification fan!.
Rooting is the only problem (which is solved now I guess) on the latest firmware.
Rooting won't do any problem, believe me (except warranty).
Sent from my GT-I9500 using xda app-developers app
avineshwar said:
Waiting is good.
Don't sell your phone though (for obvious reasons).
You've got much to explore.
When it comes to selling, you'll get money whenever you do that so keep that option as your last bet.
Custom roms aren't really preferred from my side until you are a die hard modification fan!.
Rooting is the only problem (which is solved now I guess) on the latest firmware.
Rooting won't do any problem, believe me (except warranty).
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
hello again, i am asking this question because i cant post in the development forum yet.
i downloaded 3 files from the OP http://forum.xda-developers.com/showthread.php?t=2317105
the PDA, CSC and modem. all for MJ8, downloaded PDA is odex.
when i flashed 3 of the files with ODIN like shown in op my device. After i restarted i got errors for Unfortunately, the process com.google.process.gapps .
i searched on google and did what was suggested, like clearing dalvik cache, resetting default apps, uninstalling the play store update etc.
the phone was unusable, the errors popedup every second.
I had to go back to the MG9 4.2.2 firmware.
What did i do wrong?
have you guys tried the method mentioned in the post. it prerooted and knox free 4.3 firmware.
resitm said:
hello again, i am asking this question because i cant post in the development forum yet.
i downloaded 3 files from the OP http://forum.xda-developers.com/showthread.php?t=2317105
the PDA, CSC and modem. all for MJ8, downloaded PDA is odex.
when i flashed 3 of the files with ODIN like shown in op my device. After i restarted i got errors for Unfortunately, the process com.google.process.gapps .
i searched on google and did what was suggested, like clearing dalvik cache, resetting default apps, uninstalling the play store update etc.
the phone was unusable, the errors popedup every second.
I had to go back to the MG9 4.2.2 firmware.
What did i do wrong?
have you guys tried the method mentioned in the post. it prerooted and knox free 4.3 firmware.
Click to expand...
Click to collapse
Probably you want to upgrade to 4.3?
If so goto sammobile.com and find the latest firmware for your device from there, download and flash the same via odin.
You're now on 4.3!
Once done you can root from the auto root method by chain fire.
Sent from my GT-I9500 using xda app-developers app
avineshwar said:
Probably you want to upgrade to 4.3?
If so goto sammobile.com and find the latest firmware for your device from there, download and flash the same via odin.
You're now on 4.3!
Once done you can root from the auto root method by chain fire.
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
that would be the easiest and best solution but i am worried about the knox issue, losing the warranty and also having to sell the phone later on for a lower price.
The Knox Bootloader is.... Annoying
Anyone know if I could flash the MF9 tar in ODIN and revert back to the 4.2 Bootloader
do not you will even cause bigger problems stay cool untill a tar is released they are working hard to see what they can due the only choice you have no is to go to a ROM that is 4.3 but that I know of it is still un heard of KNOX is a whole new monster that I have a feeling is gonna tick a lot of people off love love love Samsung phones but they need to realize this could hurt them....
NO.
Sent from my SPH-L720 using Tapatalk
jprocket45 said:
do not you will even cause bigger problems stay cool untill a tar is released they are working hard to see what they can due the only choice you have no is to go to a ROM that is 4.3 but that I know of it is still un heard of KNOX is a whole new monster that I have a feeling is gonna tick a lot of people off love love love Samsung phones but they need to realize this could hurt them....
Click to expand...
Click to collapse
Thanks for the reply. If I had known that KNOX was gonna be such a problem I would of held off from upgrading...
Guess I gotta be patient until our beautiful dev community comes up with some way to deal with KNOX
Robin Dhicke said:
Thanks for the reply. If I had known that KNOX was gonna be such a problem I would of held off from upgrading...
Guess I gotta be patient until our beautiful dev community comes up with some way to deal with KNOX
Click to expand...
Click to collapse
so there is no way to go back to MDC then huh? -/-
kalanir said:
so there is no way to go back to MDC then huh? -/-
Click to expand...
Click to collapse
Well not yet.
Sent from my SPH-L720 using xda app-developers app
nope stuck just like the rest of us lol its not fun
Don't worry......it's only a matter of time. If u need a stable rom, I highly recommend sac23's custom 4.3 rom. V3 will be out soon. This rom has made it easier to cope with 4.3, well easier for us who are stuck with the Knox......check out his thread. You'll love it.
Sent from my SPH-L720 using XDA Premium 4 mobile app
I'm not sure what any of you are talking about. I updated to 4.3 a couple of days ago, then wiped and flashed a MDC tar with ODIN and brought it back to MF9 with OTA updates. Everything is fine.
---------- Post added at 12:15 AM ---------- Previous post was at 12:14 AM ----------
Robin Dhicke said:
The Knox Bootloader is.... Annoying
Anyone know if I could flash the MF9 tar in ODIN and revert back to the 4.2 Bootloader
Click to expand...
Click to collapse
Yes... You can do this. I did it. See my last post above.
Sleepycloud said:
I'm not sure what any of you are talking about. I updated to 4.3 a couple of days ago, then wiped and flashed a MDC tar with ODIN and brought it back to MF9 with OTA updates. Everything is fine.
---------- Post added at 12:15 AM ---------- Previous post was at 12:14 AM ----------
Yes... You can do this. I did it. See my last post above.
Click to expand...
Click to collapse
Hello,
How did you manage to do it?
I tried to do that with Odin 1.85 and 3.07 and nothing. It aborts right away.
edgardch said:
Hello,
How did you manage to do it?
I tried to do that with Odin 1.85 and 3.07 and nothing. It aborts right away.
Click to expand...
Click to collapse
I wiped everything in TWRP, and rebooted into download mode. Then flashed the tar with 3.07 and a PIT file. Uncheck reboot. Check Repartitition, Nand erase, and F. Reset Time. When it reboots it wiil update in recovery with the little andy dude, and then reboot to load up. I pull the battery and factory reset. It works fine. I updated to 4.3 friday morning. and decided to go back to MF9 so that I could use The HotSpot Mod and Reboot Menu. F**k 4.3...it was disapointing.
EDIT-----> READ ALL OF THE FOLLOW-UP POSTS BEFORE YOU TRY THIS.... MY PHONE HAD A UNIQUE SITUATION AND THIS WILL NOT WORK FOR MOST EVERYONE ELSE.
Sleepycloud said:
I wiped everything in TWRP, and rebooted into download mode. Then flashed the tar with 3.07 and a PIT file. Uncheck reboot. Check Repartitition, Nand erase, and F. Reset Time. When it reboots it wiil update in recovery with the little andy dude, and then reboot to load up. I pull the battery and factory reset. It works fine. I updated to 4.3 friday morning. and decided to go back to MF9 so that I could use The HotSpot Mod and Reboot Menu. F**k 4.3...it was disapointing.
Click to expand...
Click to collapse
I want proof lol. go to mja again and go back to mf9 lol
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
I want proof lol. go to mja again and go back to mf9 lol
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
There is one problem. Now it won't update to MJA. Something is different, but I'm not sure what. I don't care if you don't believe me. I did it, and that is how I did it. There was one other issue. It kept redownloading the Sprint Default Configuration over and over and over. Like more than 50 times back to back.I finally deleted the apk to get that to stop. Outside of that, my phone works fine. I believe their are remnants of 4.3 and that is why it says the system is up to date on MF9 and does not prompt me for the 4.3 update. I really don't know, but m phone appears to be working perfectly.
Sleepycloud said:
There is one problem. Now it won't update to MJA. Something is different, but I'm not sure what. I don't care if you don't believe me. I did it, and that is how I did it. There was one other issue. It kept redownloading the Sprint Default Configuration over and over and over. I finally deleted the apk to get that to stop. Outside of that, my phone works fine.
Click to expand...
Click to collapse
As in tkaimg the OTA or trying to flash MJA ROM like Skyrockets or Sacs ?,
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
As in tkaimg the OTA or trying to flash MJA ROM like Skyrockets or Sacs ?,
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
The OTA. It doesn't recognize any update as being available anymore. It went from MDC to MDL to MF9 just fine. Then stopped. It says it's up to date now? I'm not sure what's going on with it, but I rerooted it and it works fine. I even innitialised it on KIES to set it all the way back to stock MF9 but it still won't show any update as being available for 4.3
daniel4653 said:
I want proof lol. go to mja again and go back to mf9 lol
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
I tried it just barely as I want to go back to my mf9 rom with the stock kernel. You get a secure error on pit and also a firmware revision error "fused 4 .... 1" can't remember what the word was where the dots were. It was a no go for me. I tried to odin back to mdc like was mentioned in the previous posts.
:EDIT Definitely don't try this. Caused my data partition to get corrupt. Couldn't format it. Couldn't pit restore it. Philz recovery couldn't mount it. Finally found an option to format data and sdcard. This allowed me to format data and restore. Once again Definitely don't try if you have the mja bootloader. (I'm back up and running and will let other figure this out.)
I just found out why I was able to go back to 4.2.2!!! When I updated to 4.3 via OTA a couple of days ago, I plugged it in to KIES 3 and noticed it said "PDA:MJA, Phone:MF9, CSC:MJA".... notice the phone says MF9! I don't know how that happened, but I didn't question it at the time because it was OTA. I thought it was supposed to be that way. Last night before I went to bed I manually flashed the 4.3 update zip after using KIES to initialise my phone back to complete stock. (It wouldn't load the zip when I was rooted) Anyways.... Well this morning I plugged it in to KIES 3 after flashing the 4.3 update.zip last night and it said MJA on all three. I'm not sure how that happened, but I only got part of the OTA update a couple of days ago it appears, and thus being, it is the reason I was able to revert. Sorry if I got anyones hopes up. I just went back and edited a warning in my first post with instructions.
Bummer!!! lol i was getting all excited.
wilsonwa said:
I tried it just barely as I want to go back to my mf9 rom with the stock kernel. You get a secure error on pit and also a firmware revision error "fused 4 .... 1" can't remember what the word was where the dots were. It was a no go for me. I tried to odin back to mdc like was mentioned in the previous posts.
:EDIT Definitely don't try this. Caused my data partition to get corrupt. Couldn't format it. Couldn't pit restore it. Philz recovery couldn't mount it. Finally found an option to format data and sdcard. This allowed me to format data and restore. Once again Definitely don't try if you have the mja bootloader. (I'm back up and running and will let other figure this out.)
Click to expand...
Click to collapse
I'm having the same issue that you had with the data partition being corrupt. I had stupidly tried to downgrade stock MJA to MF9 before checking with the forums if it was possible. It got stuck in the Firmware error message (can't remember what it exactly said), but got to restore it to a stock MJA. And now its data partition cannot be recognized in any computer. IE: Whenever I plug it into the computer it used to show that it is connected via USB and give me the MTP option. Now it will not even do that and I cannot access its data partition via the computer. Kies won't even recognize it.
How did you get to format data and sdcard?
EDIT: OK, dont know how, (I'm blaming crappy cable) but now I do have access to the phone. In other words it's working normal. But in case that this were to happen again, it would be awesome to know how to format data section, so as it can be recognized by the computer. Thanks in advance.
I downloaded the official OTA update. When I went to install it the phone needed to reboot and now I've been stuck looking at the Green Android screen saying Downloading... Do not turn off target!!! and in very small writing could not do normal boot, Odin mode. I am rooted. Please help
What version is the phone? I'm reading up on things in preparation of updating myself. I'm on MF3 and for what I've read I need to Odin back to stock before updating since I'm rooted. This may not be your case figured I'd toss it out there.
brought to you by my not so sexy GS4 MF3
padgaland said:
I downloaded the official OTA update. When I went to install it the phone needed to reboot and now I've been stuck looking at the Green Android screen saying Downloading... Do not turn off target!!! and in very small writing could not do normal boot, Odin mode. I am rooted. Please help
Click to expand...
Click to collapse
Same with me. I'm stuck at the emergency firmware recovery screen. My phone was at 4.2 and it did the OTA to 4.3.3 and froze. What do I need to do to go back to stock rom?
SGH-I337 16GB.
schreiber37 said:
Same with me. I'm stuck at the emergency firmware recovery screen. My phone was at 4.2 and it did the OTA to 4.3.3 and froze. What do I need to do to go back to stock rom?
SGH-I337 16GB.
Click to expand...
Click to collapse
You i think you should use Kies to go back they actually have a feature for that. Mine won't even be recognized by the computer or anything.
I am rooted and I was running 4.3 GoldenEye v 11 rom BTW awesome ROM and Dev support best I've ever seen on xda. Any way today I installed my nandroid back up of stock ROM 4.2 Att gs4 sgh 1337 let it boot up any settle in 10 min..when I looked at phone I saw the Att redwhite arrows in task bar I quick shut down WiFi and now under settings status it says update continue or something .now my back up is mdb never ota before. so is this update mf3 the one u that is bootlocked or is it the 4.3 update?? I read some were Att was to start with 4.3 update yesterday what u guys think I should do? Thanks in advance ..
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Ok I am going to try to go back to stock by using a firmware DL and Odin v3.07 If it works I will tell everyone. If not I may be screwed.
I'm currently on MF3 and had rooted my device previously and would like to upgrade to the new OTA. Would someone be so kind to link me to ODIN and the stock file,so I may return to stock and apply the OTA.
Thank you,
Did anyone go to recovery and factory reset?
Sent from my Nexus 7 using Tapatalk 4
Andrew149 said:
Did anyone go to recovery and factory reset?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I'd recommend it but it's to late for me.
This worked for me to unroot.
To unroot, try this. It worked for me. I'm back to "official". However, I've downloaded 4.3 like 5 times already. I can download 100%, but when it reboots to install it stops at 30% then says update failed.
http://forum.xda-developers.com/showthread.php?p=45301834
Ditto
silrosriv said:
To unroot, try this. It worked for me. I'm back to "official". However, I've downloaded 4.3 like 5 times already. I can download 100%, but when it reboots to install it stops at 30% then says update failed.
http://forum.xda-developers.com/showthread.php?p=45301834
Click to expand...
Click to collapse
Same exact problem!
wading through threads for answer!
Ok I have my phone working again. I am not on 4.3 but its back to where it was before I started, which is better than nothing. After running Odin once and it failing like it always does (I have never seen it work) I was able to get the holding down volume, home and power button option to work and I just said no and to reboot and it worked. I then went into SuperSU app and unrooted. I will try to update to 4.3 at a later time. I am glad I wasn't the only one having issues. I usually pride myself on knowing technology and being able to figure it out.
silrosriv said:
To unroot, try this. It worked for me. I'm back to "official". However, I've downloaded 4.3 like 5 times already. I can download 100%, but when it reboots to install it stops at 30% then says update failed.
http://forum.xda-developers.com/showthread.php?p=45301834
Click to expand...
Click to collapse
I had the same problem. The only way I was finally able to upgrade to 4.3 was to use Odin to revert to stock (unrooted) 4.2.2 MF3 using the files on this thread: http://forum.xda-developers.com/showthread.php?t=2502003 Once I did that I ran the OTA update to 4.3 and it worked without any problems.
So if I oden to stock again don't root Then hit the update it should go? Weird thing is I installed my back up today and it a stock backup fresh rich from a oden wipe and it stared DL on its own before I stopped it with killing WiFi. I s this 4.3 update or is it mf3 since I never did that update. ..help. Thanks
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
tried that..didnt work
padgaland said:
Ok I have my phone working again. I am not on 4.3 but its back to where it was before I started, which is better than nothing. After running Odin once and it failing like it always does (I have never seen it work) I was able to get the holding down volume, home and power button option to work and I just said no and to reboot and it worked. I then went into SuperSU app and unrooted. I will try to update to 4.3 at a later time. I am glad I wasn't the only one having issues. I usually pride myself on knowing technology and being able to figure it out.
Click to expand...
Click to collapse
Tried unrooting through SuperSU and managed to still be rooted after reboot, and OTA 4.3 still didnt work
SIGH
Read that u have to oden to stock dint root and the try ota they say this worked gunna oden back to stock and try..
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
thanks
ralphie1267 said:
Read that u have to oden to stock dint root and the try ota they say this worked gunna oden back to stock and try..
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
could you point me in the right direction for that procedure? Im trying to do it on my mac using hiemdall but I think im about to go try odin on a PC.
MasterShakeMan said:
Tried unrooting through SuperSU and managed to still be rooted after reboot, and OTA 4.3 still didnt work
SIGH
Click to expand...
Click to collapse
Take it to Best Buy. "Kies broke your phone" *wink*wink* and they can flash it back to stock without messing up your data. You can do it yourself. Plus they have this mysterious awesome SMART tool. Lol
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
MasterShakeMan said:
could you point me in the right direction for that procedure? Im trying to do it on my mac using hiemdall but I think im about to go try odin on a PC.
Click to expand...
Click to collapse
Use the link in my previous post (post #13). That has the files and procedures for using Odin to get back to stock 4.2.2 and then you can do the OTA upgrade from there.
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
If I were you I would go back and read a little information about mf3 and what kind of recovery can be used. It sounds to me like you might be very confused. In order to correctly keep from bricking your phone you may want to read up on things. Good luck.
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Since you are rooted, take a look in the /cache/recovery directory. Read the log file. It will tell you where things messed up.
For example, I had forgotten that I did something with csc and had replaced the feature.xml file. Luckily, I had a back up of the original file. I renamed it, fixed is file permissions to rw-r--r--, advanced my clock one day, and then was able to install MJ9.
Good luck, and remember you won't have root anymore when you install this (for the time being)
Yrs,
dkephart
Sent from my SAMSUNG-SGH-I337 using Tapatalk
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
I had the same problem. The only way I was finally able to upgrade to 4.3 was to use Odin to revert to stock (unrooted) 4.2.2 MF3 using the files on this thread: http://forum.xda-developers.com/showthread.php?t=2502003 Once I did that I ran the OTA update to 4.3 and it worked without any problems
To able to keep your root and upgrade from 4.2.2 to 4.3 you have to change your param file back to the stock. Thats all the information that I have so far so... not completely sure. But I think that is what you're supposed to do.
Because you have a custom param file, when you try to upgrade to 4.3 it's telling you there is an issue with your phone.
I may be wrong.
Is there a copy of the correct feature.xml? Im having the same issue
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
According to the log its stopping when it can't find the chat on apk. I did remove it using titanium.
Will restore it try again andbipdate the thread. Thanks for pointing out the correct log file to look at.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I checked again and found my backup feature.xml. Typed this from mj9.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ckalantzis said:
Hi,
On MF3.
I'm rooted. I have clock work recovery installed.
I can download the update succeffuly however when the phone reboots the install begins, gets as far as 25% then fails. Phone reboots back to 4.2.2 with a message that says the install was interrupted.
Have tried twice with the same result.
Anyone else experiencing this?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
I had the same problem happen to me on Wednesday night and last night. Today I used Odin to go back to stock MF3, however, then I couldn't get the OTA update. It kept saying my firmware was up to date each of the three times I restored it.
Now I'm finally on MJ9 after copying "update-mf3-mj9.zip" to my SD card, going into recovery mode, and updating from external SD card. Now I can use my Galaxy Gear!
Cause I want to sound like a noob.
How did you install CWM on what reads to me a MF3 S4.
Those on MF3 have been using Safestrap cause CWM hasn't been possible.
Sent from my ATT S4 MF3 using Tapatalk
jball said:
Cause I want to sound like a noob.
How did you install CWM on what reads to me a MF3 S4.
Those on MF3 have been using Safestrap cause CWM hasn't been possible.
Sent from my ATT S4 MF3 using Tapatalk
Click to expand...
Click to collapse
I was excited when I rooted the phone, then installed ROM manager premium. It allowed me to install the recovery. You can even boot into the recovery from ROM Manager.
However since the S4 is locked down tight, you can do any thing from there. So i can't flash anything. It even gives me a message saying as much.
However it is partially installed I can boot into it at will.
I will post a video of it. So that you all have an idea of what im talking about.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Don't waste your time with a video,its your stock recovery.your not the first to have done this.lets jump ahead a bit and just install Safestrap.whats Safestrap you might ask?search for it and READ please sir.
Sent from my ATT S4 MF3 using Tapatalk
jball said:
Don't waste your time with a video,its your stock recovery.your not the first to have done this.lets jump ahead a bit and just install Safestrap.whats Safestrap you might ask?search for it and READ please sir.
Sent from my ATT S4 MF3 using Tapatalk
Click to expand...
Click to collapse
While I was preparing to record it, I did notice that you are correct. Although Rom Manager goes through the motions of flashing the recovery, when you attempt to boot into the Recovery, you are faced with an Error, and default back into Android Recovery.
Although I know all about Safestrap...I think we've all missed the point. The OP was meant to get help about why the 4.3 OTA was failing 25% into the install.
I've got what I needed by being pointed to the location of the install log.....and while reading through it, I noticed that the install is failing because I removed the Chat On APK. I will install from backup and move forward.
Thank you all who provided the necessary guidance to solve the original problem.
Thank you as well to those who helped clear up the whole Clockwork vs Android recovery part. Although a minor part of the original post, it's good that we don't spread misinformation.
Cheers
ckalantzis said:
While I was preparing to record it, I did notice that you are correct. Although Rom Manager goes through the motions of flashing the recovery, when you attempt to boot into the Recovery, you are faced with an Error, and default back into Android Recovery.
Although I know all about Safestrap...I think we've all missed the point. The OP was meant to get help about why the 4.3 OTA was failing 25% into the install.
I've got what I needed by being pointed to the location of the install log.....and while reading through it, I noticed that the install is failing because I removed the Chat On APK. I will install from backup and move forward.
Thank you all who provided the necessary guidance to solve the original problem.
Thank you as well to those who helped clear up the whole Clockwork vs Android recovery part. Although a minor part of the original post, it's good that we don't spread misinformation.
Cheers
Click to expand...
Click to collapse
You handled this all very well.
ITNV said:
I had the same problem. The only way I was finally able to upgrade to 4.3 was to use Odin to revert to stock (unrooted) 4.2.2 MF3 using the files on this thread: http://forum.xda-developers.com/showthread.php?t=2502003 Once I did that I ran the OTA update to 4.3 and it worked without any problems
Click to expand...
Click to collapse
Did you use all files? I mean, I've been trying the same for the past couple of days, and I even asked in that thread if I could use just the PDA file, nobody replied so I went ahead and did it, it removed the root and I kept all my files and settings (That was the idea) but just after that I can't connect anymore to Kies ( I could without issues, I did a full backup moments before) and trying to do the sideload it always gives me the Error 7, I even tried the full SD card update,it erased everything and guess what, when it rebooted for my surprise I was still at 4.2.2 MF3, so it just did the Wipe Data and then rebooted, so I lost almost 6 hours getting everything back as it was and then, I had the Damaged SD card error so I also lost all my pictures and videos withoout back up.
So, as you can see half a day later I'm still at the same point I was this morning and with a huge loss, so, please, Did you use all the files? If you did, doing this erase everything also?
Thanks in adavance.
erasat said:
So, as you can see half a day later I'm still at the same point I was this morning and with a huge loss, so, please, Did you use all the files? If you did, doing this erase everything also?
Thanks in adavance.
Click to expand...
Click to collapse
Yes. I used all the files. The result was a completely stock unrooted 4.2.2 so, yes, it reset the phone and erased everything that I had on there. (It left my external SD card intact but I would still advise removing it if there is anything on there you don't want to lose.)
ITNV said:
Yes. I used all the files. The result was a completely stock unrooted 4.2.2 so, yes, it reset the phone and erased everything that I had on there. (It left my external SD card intact but I would still advise removing it if there is anything on there you don't want to lose.)
Click to expand...
Click to collapse
Yep, that was the reason why I just used the PDA I didn't want to lose my data, and then I did it anyways, my mistake was not doing the Odin Restore just after I realized that it erased everything and I was still at 4.2.2, that's was the perfect time to do it, but now, after I finally put everything back as it was, I simply don't see myself by my own choice, doing all this again.
Thanks.
erasat said:
Did you use all files? I mean, I've been trying the same for the past couple of days, and I even asked in that thread if I could use just the PDA file, nobody replied so I went a head and did it, it removed the root and I kept all my files and settings (That was the idea) but just after that I can't connect anymore to Kies ( I could without issues, I did a full backup moments before) and trying to do the sideload it always gives me the Error 7, I even tried the full SD card update,it erased everything and guess what, when it rebooted for my surprise I was still at 4.2.2 MF3, so it just did the Wipe Data and then rebooted, so I lost almost 6 hours getting everything back as it was and then, I had the Damaged SD card error so I also lost all my pictures and videos withoout back up.
So, as you can see half a day later I'm still at the same point I was this morning and with a huge loss, so, please, Did you use all the files? If you did, doing this erase everything also?
Thanks in adavance.
Click to expand...
Click to collapse
It was mentioned several times in that thread exactly what files to use and how to use them. There were also several pictures provided that showed EXACTLY what the ODIN screen should look like before the flash.
scott14719 said:
It was mentioned several times in that thread exactly what files to use and how to use them. There were also several pictures provided that showed EXACTLY what the ODIN screen should look like before the flash.
Click to expand...
Click to collapse
In the thread, there are tons of instances where it explains where to use each file and even pictures, I know because I read every single post, but none of them explains if I could use just the PDA one if I wanted to keep my settings while unrooting the phone, that's why I asked about it, because nobody replied to my question I decided to be the guinea pig, and yes, it works, you keep your settings, and I was glad, but as you can see, what I wanted to accomplish didn't work after all. Without all the files it doesn't fix the issue that causes the error 7 when doing the sideload.
help with mf3 to mj9
Having the same issue and formatted card with backup image.
Update got to 23 % and failed
now phone refuses to flash in odin.....and im missing factory apps preventing me from doing anything to get it back to stock
anyone have a stock restore image I could use in kies?
Would that work properly?