2 years ago I buy my galaxy s4 unlocked version from amazon.com. When I came back to Turkey I registered the Cellphones imei. After that I rooted my galaxy s4. I watch lots of tutorials and most of it did not work out. At the last try I was able to root my device. After a year my uncle bought me a gear 2 neo which needed a higher version of android. So i plug my galaxy s4 and updated trough kiosk. The result was my galaxy s4 was mys galaxy s4 lost its root acsess was gone and system was updated. Also most of the apps first run and then give a error. For example i downloaded can knockdown 3. First it worked fine then it stopped working. One of my friend suggested I need to downlad a rom and suggested cyanogenmod. I tried one button installer but it said the device is not supperted for this installer. But my phone is listed in the supported devices(GTI9500). Please help me. My cellphone is slowly dying. Also last thing. They say making a change on the phone sometimes deletes the imei registiration.
Just perform a factory reset and your issues will probably be resolved. If you want root again just flash cf auto-root.
I have done it and it hasn't changed. Still the same issues.
aebatirel said:
2 years ago I buy my galaxy s4 unlocked version from amazon.com. When I came back to Turkey I registered the Cellphones imei. After that I rooted my galaxy s4. I watch lots of tutorials and most of it did not work out. At the last try I was able to root my device. After a year my uncle bought me a gear 2 neo which needed a higher version of android. So i plug my galaxy s4 and updated trough kiosk. The result was my galaxy s4 was mys galaxy s4 lost its root acsess was gone and system was updated. Also most of the apps first run and then give a error. For example i downloaded can knockdown 3. First it worked fine then it stopped working. One of my friend suggested I need to downlad a rom and suggested cyanogenmod. I tried one button installer but it said the device is not supperted for this installer. But my phone is listed in the supported devices(GTI9500). Please help me. My cellphone is slowly dying. Also last thing. They say making a change on the phone sometimes deletes the imei registiration.
Click to expand...
Click to collapse
Sounds like your phone may have been corrupted when installing official firmware on top of the root. I would recommend re-flashing your phone with official stock firmware. You can use this website to obtain a stock firmware for your device model
http://galaxys4root.com/galaxy-s4-stock-firmware/
Your imei should not be affected if you re-flash your phone, however just to be on the safe side you can flash a recovery mod such as TWRP Recovery and back up everything such as your efs which contains your imei baseband in case a re-flash causes your phone to not work on cell networks in Turkey (which I'm guessing is not the country your phone was purchased in.) After you have backed up everything in TWRP to your sdcard you can safely reflash stock firmware.
Related
Ok, so first off I rooted my previous phone (a Verizon Motorola Droid X2) without any problems ever. I dropped Verizon as my carrier and switched to Straight Talk and I bought the Samsung Galaxy S4, after a few months of having it I decided to look for a way to root it. After a few days of browsing and reading about I found and root option that worked. (http://forum.xda-developers.com/showthread.php?t=2565758) This saferoot worked and i had superuser and was able to do everything i wanted to.
I then went on the Google play store and installed apps that I previously had on my old device for rooted phones. Well I installed chainfire3D and opened it up and clicked install the drives (which then requires a reboot) after a sort time I noticed my phone was stuck on the loading screen and I can't get past it.
I then start looking for a unroot/unbrick option in order to restore my phone to default firmware and factory settings to get it to work again.
Now here is the dilemma...
Like it says in the title, the phone model is SGH-S970G and for the life of me I can't find this model's firmware anywhere.
plz help me asap!!!!
Thank you in advance for any useful information to help point me in the right direction or give me a solution!
Chuggalo said:
Ok, so first off I rooted my previous phone (a Verizon Motorola Droid X2) without any problems ever. I dropped Verizon as my carrier and switched to Straight Talk and I bought the Samsung Galaxy S4, after a few months of having it I decided to look for a way to root it. After a few days of browsing and reading about I found and root option that worked. (http://forum.xda-developers.com/showthread.php?t=2565758) This saferoot worked and i had superuser and was able to do everything i wanted to.
I then went on the Google play store and installed apps that I previously had on my old device for rooted phones. Well I installed chainfire3D and opened it up and clicked install the drives (which then requires a reboot) after a sort time I noticed my phone was stuck on the loading screen and I can't get past it.
I then start looking for a unroot/unbrick option in order to restore my phone to default firmware and factory settings to get it to work again.
Now here is the dilemma...
Like it says in the title, the phone model is SGH-S970G and for the life of me I can't find this model's firmware anywhere.
plz help me asap!!!!
Thank you in advance for any useful information to help point me in the right direction or give me a solution!
Click to expand...
Click to collapse
If you get your phone fixed, I suggest you skip reinstalling Chainfire 3D. It specifically says it's not for Jelly Bean devices.
Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck.
Do you know what Region the phone was originally? I had a similar issue and I had to get the Hong Kong (in my case) version of a stock ROM and flash that to get things working again. Not all partitions are the same - you might need a PIT file to match your original region and then flash the ROM.
What info do you get in DL mode?
Journyman16 said:
Do you know what Region the phone was originally? I had a similar issue and I had to get the Hong Kong (in my case) version of a stock ROM and flash that to get things working again. Not all partitions are the same - you might need a PIT file to match your original region and then flash the ROM.
What info do you get in DL mode?
Click to expand...
Click to collapse
Yes the phone is for AT&T so it's US. When I go into DL mode Knox counter is still 0x0. Is there a certain firmware I need then to match with the AT&T model? Or a pit?
jthornton71707 said:
Yes the phone is for AT&T so it's US. When I go into DL mode Knox counter is still 0x0. Is there a certain firmware I need then to match with the AT&T model? Or a pit?
Click to expand...
Click to collapse
Go to Sammobile and see if you can find the version you had, sounds like an older JB if kingo app didn't trip Knox. Reflash that using ODIN.
I don't know if there was a problem with American bootloader, see if there's an AT&T Note 3 forum. Might find answers there...
jthornton71707 said:
Hey guys. Ive had a note 3 before in the past and have used the Root DelaVega to root successfully. This was early in the year. I sold my old note 3 for an HTC One. Well today i traded my HTC One back for a note 3 as i missed the Note 3. As soon as i came home i attempted to use the Root DelaVega method to foot (just like i did before) and immediately it failed.
I have been stuck on a screen saying "firmware update encountered an issue - select recovery in Kies" so i tried Kies 3.2 however it says my device is not compatible. Come to find out after doing research (talking to the original owner i traded my HTC One for) the Note 3 i have is on the latest version of KitKat 4.4.2 that is not compatible with the Root DelaVega method or any root method - so i screwed that up. I can successfully boot in and out of download mode. Ive tried to flash N900XXUDNA6 4.4.2 in Odin several times, it begins then fails almost immediately and the bar on the phone itself (in download mode) begins then freezes shortly after beginning. Ive also tried to flash N900XXUDNC1 JellyBean thru odin and get the same results - almost immediately fail and the blue status bar on the phone freezes when it barley begins. What else can i do??? am i totally screwed? Ive been researching and trying to fix this for 6 straight hours now! My gf is about to kill me for being online so long Is there anything i can do at this point? Am i stuck.
Click to expand...
Click to collapse
Hi mate,
if you are stuck, maybe you can try this.
http://forum.xda-developers.com/show....php?t=2701062
it's a way to unbrick your software.
and if the older owner of your N3 said it's on the latest firmware of kitkat.
maybe your problem is the firmware in the sammobile were before the firmware you have install on your device via OTA update.
Yours firmware came throw out via OTA update and with some reason you can't see any latest firmware USA N900A in sammobile.
try the method in the link and reply if you have been successful.
cumps
Ik Knox is 0×0,then u can try samsung service centre ?
Sent from my SM-N900 using XDA Premium 4 mobile app
Hello everyone,
i am fairly new to the world of rooting and recently encountered a problem while flashing a rom
i have the at&t samsung galaxy note 3 N-900A running 4.3 jellybean (2 year contract expired and i got and used the unlock code)
i rooted the phone using the kingo root app, because i could not update the phone (I recently moved out of the USA so i cant connect to an at&t server to update)
i installed safestrap recovery 3.71 and it was running fine
i found a tutorial from galaxy note 3 root for the knoxraid ro
(put youtube. c o m here) /watch?v=8HDHt4xSnQY
according to the tutorial i had to install the rom over the stock rom file
so i copied the stock rom to rom slot 1
this is where i messed up, i installed the knoxraid rom over the stock rom without wiping/data factory reset first. But it gets worse, i realized i forgot to wipe the data from safestrap so before the install was even halfway completed, i pulled the battery out.
now whenever i turn it on it will go straight to recovery mode
it wont even turn off. i have to pull the battery out.
i can get to download mode and recovery mode but thats it.
im not sure about the build number because it wont boot up
all i can tell you is it is a at&t note 3 running 4.3 jellybean
please help if you can
btw: my computer wont recognize the phone because it says the PHONE does not have the correct drivers installed
however odin still recognizes it with the blue box with 0:[COM6] if that helps
so yeah please help me the phone is fairly new and i dont want to waste $600
infinitephase said:
Hello everyone,
i am fairly new to the world of rooting and recently encountered a problem while flashing a rom
i have the at&t samsung galaxy note 3 N-900A running 4.3 jellybean (2 year contract expired and i got and used the unlock code)
i rooted the phone using the kingo root app, because i could not update the phone (I recently moved out of the USA so i cant connect to an at&t server to update)
i installed safestrap recovery 3.71 and it was running fine
i found a tutorial from galaxy note 3 root for the knoxraid ro
(put youtube. c o m here) /watch?v=8HDHt4xSnQY
according to the tutorial i had to install the rom over the stock rom file
so i copied the stock rom to rom slot 1
this is where i messed up, i installed the knoxraid rom over the stock rom without wiping/data factory reset first. But it gets worse, i realized i forgot to wipe the data from safestrap so before the install was even halfway completed, i pulled the battery out.
now whenever i turn it on it will go straight to recovery mode
it wont even turn off. i have to pull the battery out.
i can get to download mode and recovery mode but thats it.
im not sure about the build number because it wont boot up
all i can tell you is it is a at&t note 3 running 4.3 jellybean
please help if you can
btw: my computer wont recognize the phone because it says the PHONE does not have the correct drivers installed
however odin still recognizes it with the blue box with 0:[COM6] if that helps
so yeah please help me the phone is fairly new and i dont want to waste $600
Click to expand...
Click to collapse
Well, this is the wrong forum to begin with.
However, head over here, http://forum.xda-developers.com/showthread.php?t=2703006 , and read very, very carefully.
sirobelec said:
Well, this is the wrong forum to begin with.
However, head over here, http://forum.xda-developers.com/showthread.php?t=2703006 , and read very, very carefully.
Click to expand...
Click to collapse
sorry, next time ill post in the right forum
thanks for the link, however this appears to be for the N900AUCUCNC2 variant, which i believe is KitKat (sry if im wrong) i need files for 4.3 jellybean firmware. (i never updated)
thanks in advance
Dear tweakers of XDA,
I've got a problem with my note 3. After i'd seen the thread for the Note 4 styled S5 Based ROM. I decided i wanted to give Rooting and flashing custom roms a try ( Havn't done it since my S2).
All went well and dandy, i rooted with CF Autoroot knowing my knox counter would trip to 0x1. I've installed CWM Recovery, downloaded the rom and installed it through the CWM Recovery. After install i saw that my wifi didnt work and my 3G Data didnt work which was strange because the regular calling functioned ? Also i installed AEL's newest kernel (because the thread says it wasnt included i had to flash it myself )
After not being able to fix this i'd decided to download ODIN and the correct firmware for my phone, Tmobile Netherlands N9005 TNL version 4.4.2
I flashed it back using ODIN and to my surprise the phone was extremely slow. Reacting really late 5-10-15 seconds later to the sleep/wake button. The lockscreen would also hang for about 30 seconds and the IMEI is unknown. Whenever i open the Phone app it gets stuck. Network doesn't work at all ofcourse because of the IMEI. I do have a backup of my EFS and i'm not too scared of anything. I just really want my note back the way it was
Could you kind people help me ?
if you have a efs back up, so restore it with the original firmware
I used to face the same problem, but i was not as lucky as you - i had no efs back up, and i have to use sptbox - e.g. my original Imei has gone :3
btw, did you face any sensors issues?
There is a efs recovery script in note 3 Android dev thread. Gold luck!
http://forum.xda-developers.com/showthread.php?t=2507403
This
I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
I'm afraid I'm not familiar with Samsung devices, and because I purchased this from ebay, I don't know how to tell the exact state that the former user put it in (I expected they would return it to stock prior to selling).
It's currently a T-Mobile branded, SM-N900T, on 4.4.2, build is KOT49H, security software MDF v1.0 release 2. Kernel is 3.4.0-660648.
It is supposedly unlocked for carriers, though I have not attempted a SIM card use yet, until I can tell that what I have is a valid device and the IMEI is checked out.
Any thoughts on how to validate the IMEI, and sort out how to get my new phone up to date would be appreciated. As I stated, I expected the vendor would have returned it to stock, but that is clearly not the case, so I don't want to accidentally boot loop it by doing something I shouldn't. I have not owned a Samsung before, so I want to be careful on how it differs from my Nexus 7, Amaze 4g, and Droid X, as they're all obviously very different in the OS area.
Thank you for the help1
Download tbe stock 4.4.2 rom and use odin to install. Then you will get the OTA updates.
Sent from my SM-N900P using Tapatalk
There is no stock 5.1.1 for note 3, only cm12.1/ aosp. Latest is 5.0 and you can use odin to flash. Maybe it's rooted that's why you can't update.
bladebarrier said:
I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
...
Thank you for the help1
Click to expand...
Click to collapse
Some apps to install from Play Store...
Phone INFO Samsung - this will tell you all about your phone and the firmware etc.
Root Checker Basic - tells you if you are rooted or not.
SuperSU - this is so valuable you should buy the Pro licence. Chainfire does some great work for our phones.
TWRP - I have the zip version on my extSDCard and an Odin version on PC in case I have to rebuild from a Stock firmware. CWN works OK but most ROM builds seem to be for TWRP I think and a backup from one will not work on the other.
I don't know your previous phone so you probably need Odin v3.09 - this sits on PC and lets you flash firmware to the phone. (connected by USB)
For which you need Samsung USB drivers so the PC will recognise the phone. Install on PC before connecting phone.
Then do some browsing and find the processes to root your phone and install the ROM you want. If you just want Stock and access to all your phone, you can root it after flashing the original v5.0 download (from Sammobile or similar site - note on Sammobile you need a free account to DL) and then install Custom recovery (if wanted - it WILL trip the Knox flag but that may not matter given it's 2nd hand and might already be tripped anyway)
Read, make SURE you understand what is being said BEFORE you do anything - ask if you don't.
Good luck...
N9005 Lollipop brick
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Thank you all for the info, especially the detailed info from Journyman16. I checked, and it is flagged as custom, which is fine, so I'm going to go ahead and try to return to mostly stock, update it, and root it.
Ok, everything went well. I had to do two attempts at rooting, but I think it's just one of those things where sometimes it doesn't restart into the process every time.
All seems good. I'm on 5.0, rooted, busyboxed, and smooth sailing.
Thank you all, again, for the tips. The Note 3 is running very well. Thank you to all of the devs that have made this process so refined. I've donated to you before, and did so again today. It's outstanding to have such well versed coders, on XDA, helping out the community.
mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Click to expand...
Click to collapse
You have never learned not to ask in others posts? What does your problem has to do with this topic at all?
When you need help. Just click on Q&A then Create a new thread. How hard is it?