How To "Root, Install Custom Recovery, CM 12.1" on Your "LG G3 Beat, S, D274/D722
Hello guys, i have found no one on the internet did How-To ..
Root - Install Custom Recovery - Install CM 12.1 on Lg g3 beat, s (D742/D22) in English!
so i was thinking why i don't make this video!
here you go guys! my first video will teach you step by step everything you need about your LG G3 Beat!
Replace this " jt-aeJvWhAE " with any Youtube video after ( watch?v= ) so you can watch the video
Support me guys! i'm planning to make a lot of videos about android! :fingers-crossed:
"i'm not apply to put links before approximately 10 posts"
anyone have or heard of this watch? i bought one off of amazon and would like to know if anyone has anything they can share about this watch.like to know if i can flash another watch roms to it..ty
UPDATE: this watch has MT6572 chipset
5.0 mp cam, 512mb/4gb no sd slot,play store,1.6 screen,android 4.4.2..i like the watch alot, but would like to know if i can flash the bios with another rom like zgpax s8 or something simular..again thx
*UPDATE*
well i flashed a rom from another watch that is of the same form factor. The firmware is from a watch named Mlais and its based off of Android 4.2.2..the build number is 02_sw_jbl_mlais_20140611 and its available @needrom. it tried the 4.4.2 KK rom, but camera didnt work as was play store wasnt installed. Play store was absent from this rom also, but i was able to install it after i rooted with Kingo root. so far the watch is functioning pretty well, as im very new to this hobby. Would like to know in detail what i can do with this watch now that it is rooted(tweaks,apps,custom roms Etc.)any feedback would be welcomed.
Bought a cheap Chinese smartwatch over the Internet, seemed a Y1 but now I think it's a fake.
Used code *#8375# to get some info, which look as follows:
[VERSION]: K13-COB-Y1- IPS7789BOE-BDYD-ZH-V06.563- 20180507 [BRANCH]: 11CUMEOX_61D_BT_11C
I think it has the Mediatek MTK6261D chip.
The pedometer seems fake as well and counts 7 steps every 7 seconds. The screen waking gesture doesn't work.
Inserted a 16G spare microSD card I had, and confirmed the watch is able to read it.
Tried to install some other watch face with the Mediatek SmartDevice Android app. The app recognizes the watch as a Y1 but I can't install any watch face.
Any help available? Thanks
debernardis said:
Bought a cheap Chinese smartwatch over the Internet, seemed a Y1 but now I think it's a fake.
Used code *#8375# to get some info, which look as follows:
[VERSION]: K13-COB-Y1- IPS7789BOE-BDYD-ZH-V06.563- 20180507 [BRANCH]: 11CUMEOX_61D_BT_11C
I think it has the Mediatek MTK6261D chip.
The pedometer seems fake as well and counts 7 steps every 7 seconds. The screen waking gesture doesn't work.
Inserted a 16G spare microSD card I had, and confirmed the watch is able to read it.
Tried to install some other watch face with the Mediatek SmartDevice Android app. The app recognizes the watch as a Y1 but I can't install any watch face.
Any help available? Thanks
Click to expand...
Click to collapse
Can you upload FULL_FLASH Backup please?
I have to get comfortable before with all these tools to download and upload watch firmwares, plus, I don't have a Windows computer (just virtualized Windows XP and Linux Mint on a MacBook).
I had this same question
[VERSION] K13-COB-Y1-IPS7789HSD-QCY-KS-V.1429-20180522[BRANCH]:11CUMEOX61D_BT_11CBUILD:_NO SERIAL#:[BUILD TIME]2018/05/22 12:25[MRE VERSION]3100HAL_VERNO:
Thank you.
If everything goes well, I receive a Y1 watch today.
Is it difficult to make a backup of the firmware?
Cause if it is not too difficult, I would try to make it and share the rom with you. It would be nice to install additional faces to this watch.
OK I got
1) FlashTool_v5.1516.00
2) mtk drivers v1.1032.1
3) Readback Extractor mtk 2.4
I'll try to run them on a XP virtualbox istance in my Mac.
Could anybody please point me to a guide to backup the original firmware, so that I can upload it here?
Thanks.
debernardis said:
OK I got
1) FlashTool_v5.1516.00
2) mtk drivers v1.1032.1
3) Readback Extractor mtk 2.4
I'll try to run them on a XP virtualbox istance in my Mac.
Could anybody please point me to a guide to backup the original firmware, so that I can upload it here?
Thanks.
Click to expand...
Click to collapse
Her comes your Download:
Flashtools and Flash Guide inside
https://drive.google.com/open?id=1xd3HyHitBzW0x1fufchU5aFkAoY9slV4
any update yet on y1 smartwatch?
i need assistance too to install watch face on y1, some one or some guide specifically for this watch?
hi there is a pc software call "smart china res", this can change your watch face easily,but i guess is paid software.need to google it.
Hi all,
Does anyone have the stock firmware for a Tenfifteen F1 or similar Smartwatch based on the MTK2503 SoC? Like an idiot I reflashed mine with the firmware from a Microwear L1 (which mostly works but has stopped the heart rate sensor working), without backing the original up.
Thanks!
Same )
mattabbo said:
Hi all,
Does anyone have the stock firmware for a Tenfifteen F1 or similar Smartwatch based on the MTK2503 SoC? Like an idiot I reflashed mine with the firmware from a Microwear L1 (which mostly works but has stopped the heart rate sensor working), without backing the original up.
Thanks!
Click to expand...
Click to collapse
I maked the same
but before flashing i was making a backup but i rebuild the firmware and now im here to help you (i got the same problem and unable to find any working firmware )
and still same internal error if i try to install a watch face with mtk smartdevice
h0t0t0p0:0/0/0j.0g0s0/0C010X0M0
im unable to post link i dont have 10 posts )
place it in notepad and remove all 0
Kostels said:
Same )
I maked the same
but before flashing i was making a backup but i rebuild the firmware and now im here to help you (i got the same problem and unable to find any working firmware )
and still same internal error if i try to install a watch face with mtk smartdevice
h0t0t0p0:0/0/0j.0g0s0/0C010X0M0
im unable to post link i dont have 10 posts )
place it in notepad and remove all 0
Click to expand...
Click to collapse
watch working but screen veritical lines
I loathe the watch faces on the TWP3, and third-party ones drain battery for me. Is it possible for someone with a new E3 to extract the watch faces, or does anyone know of a dump of them I can install?
Thanks.