My Nexus 7 is a stock 4.2.2 rooted and has CWM recovery. The 4.3 OTA offering has arrived. Is there any way to actually allow it to update and still have CWM? I assume that with CWM I can flash something that will return root.
kmandel said:
My Nexus 7 is a stock 4.2.2 rooted and has CWM recovery. The 4.3 OTA offering has arrived. Is there any way to actually allow it to update and still have CWM? I assume that with CWM I can flash something that will return root.
Click to expand...
Click to collapse
After the OTA, just re-flash CWM or TWRP, and then use it to flash the latest SuperSU update.
How did that work out for you?
I have the same setup. Stock 4.2.2, rooted, CWM. But when I accepted the OTA it error'd out so I rebooted and never saw the OTA update again. Tried manually updating via "system" settings menu. I don't recall the error. Now I'm not sure how to get and install 4.3....and without ANY impact on data.
Thanks!
mmoreimi
mmoreimi said:
How did that work out for you?
I have the same setup. Stock 4.2.2, rooted, CWM. But when I accepted the OTA it error'd out so I rebooted and never saw the OTA update again. Tried manually updating via "system" settings menu. I don't recall the error. Now I'm not sure how to get and install 4.3....and without ANY impact on data.
Thanks!
mmoreimi
Click to expand...
Click to collapse
This happened to me too. In my case it was because I was running the hybird 84/33 modem for LTE on 4.2.2 and the update fails when it checks whats currently installed. As in your case after the failure the update is no longer available.
I went and flashed the original 48 modem (for 4.2.2) from
http://forum.xda-developers.com/showthread.php?t=2087227
and then followed the update instructions on
http://forum.xda-developers.com/showthread.php?t=2378413
after which I reflashed the hybrid modem. It worked and I'm now on 4.3 with root, CWM recovery, and LTE.
Hello, so even though I'm fairly new to the world of custom ROM's I feel as though this website has provided me with more than sufficient information for me to keep on flashing. I've flashed a few ROM's in the past but I'm currently stuck as for what I should do next. I currently have an S4 ATT MF3 which I would like to upgrade to MK2 so that I can put a 4.4.2. ROM via Safestrap using the Deadly Venom method.
Based on the guide (http://forum.xda-developers.com/showthread.php?t=2573080) I need to boot into the stock recovery and flash stock MF3 then MK2 which I can then root and safestrap. When I added my first ROM on this device I replaced the stock ROM (I have a hatred for TouchWiz) and replaced with a GPE ROM.
My phone can no longer boot into the stock Samsung recovery, it merely just bootloops instead, but I can still flash via Safestrap. So what should I do? Can I get the stock recovery back? Would I have any issues if I flash the MK2 update via Safestrap instead of the stock recovery? Will flashing the MF3 stock tar via Odin be all that I need to do? Any advice would be appreciated!
DarthVayda said:
Hello, so even though I'm fairly new to the world of custom ROM's I feel as though this website has provided me with more than sufficient information for me to keep on flashing. I've flashed a few ROM's in the past but I'm currently stuck as for what I should do next. I currently have an S4 ATT MF3 which I would like to upgrade to MK2 so that I can put a 4.4.2. ROM via Safestrap using the Deadly Venom method.
Based on the guide (http://forum.xda-developers.com/showthread.php?t=2573080) I need to boot into the stock recovery and flash stock MF3 then MK2 which I can then root and safestrap. When I added my first ROM on this device I replaced the stock ROM (I have a hatred for TouchWiz) and replaced with a GPE ROM.
My phone can no longer boot into the stock Samsung recovery, it merely just bootloops instead, but I can still flash via Safestrap. So what should I do? Can I get the stock recovery back? Would I have any issues if I flash the MK2 update via Safestrap instead of the stock recovery? Will flashing the MF3 stock tar via Odin be all that I need to do? Any advice would be appreciated!
Click to expand...
Click to collapse
If you don't mind losing your user data (back up anything you want from internal storage) just flash the MK2 full ODIN. Otherwise, there is a thread somewhere with just the MF3 recovery image and if you have root you could use an app to manually flash that (don't remember the app).
DeadlySin9 said:
If you don't mind losing your user data (back up anything you want from internal storage) just flash the MK2 full ODIN. Otherwise, there is a thread somewhere with just the MF3 recovery image and if you have root you could use an app to manually flash that (don't remember the app).
Click to expand...
Click to collapse
The app is flashify
Sent from my Nexus 5 using XDA Free mobile app
Possible to restore stock recovery?
So after (stupidly) assuming that I knew what I was doing since I have been rooting/flashing/breaking/fixing my S3 for two years now that I would be able to easily install CM11 on my dad's S4 since he is always complaining about AT&T bloatware. He is running the absolute latest update from AT&T and never rooted or anything. I was able to successfully root it using the extSdCard method, but then made the mistake of trying to flash TWRP.
After a couple of failures, I went onto these forums to see that it is well documented that custom recoveries do not work with the latest firmware. Noted, and I will keep an eye out for updates to this issue.
My questions:
Since the goal was only to install Cyanogenmod 11, I would have just run the CM Windows Installer if I wasn't trying to create a full stock backup first (hence why I tried rooting and installing TWRP first). Since that is no longer an option, has anyone attempted to use the CM Windows Installer on the MF3 build? I assume that if a custom recovery cannot be installed that this method will not work, but was just wondering if anyone has had success.
The more important questions...
Since the stock recovery is now gone, will this create an issue if a new OTA update is released and he attempts to install? I am wondering if the OTA updates rely on the existing recovery to complete the update or if the OTA will rebuild it before installing the update?
Lastly, are there reliable methods for restoring the stock recovery?
Thanks everyone!
pravus87 said:
So after (stupidly) assuming that I knew what I was doing since I have been rooting/flashing/breaking/fixing my S3 for two years now that I would be able to easily install CM11 on my dad's S4 since he is always complaining about AT&T bloatware. He is running the absolute latest update from AT&T and never rooted or anything. I was able to successfully root it using the extSdCard method, but then made the mistake of trying to flash TWRP.
After a couple of failures, I went onto these forums to see that it is well documented that custom recoveries do not work with the latest firmware. Noted, and I will keep an eye out for updates to this issue.
My questions:
Since the goal was only to install Cyanogenmod 11, I would have just run the CM Windows Installer if I wasn't trying to create a full stock backup first (hence why I tried rooting and installing TWRP first). Since that is no longer an option, has anyone attempted to use the CM Windows Installer on the MF3 build? I assume that if a custom recovery cannot be installed that this method will not work, but was just wondering if anyone has had success.
The more important questions...
Since the stock recovery is now gone, will this create an issue if a new OTA update is released and he attempts to install? I am wondering if the OTA updates rely on the existing recovery to complete the update or if the OTA will rebuild it before installing the update?
Lastly, are there reliable methods for restoring the stock recovery?
Thanks everyone!
Click to expand...
Click to collapse
I would flash in Odin the stock mf3 tar file, but out will wipe the device. All his apps and data. If you can find the mf3 recovery image file you could try to flash that in flashify, if you're rooted
Edit, found this. I didn't download the file but I'm guessing it's a .img file. You could flash that in flashify or use the dd command
Sent from my Nexus 5 using XDA Free mobile app
pravus87 said:
So after (stupidly) assuming that I knew what I was doing since I have been rooting/flashing/breaking/fixing my S3 for two years now that I would be able to easily install CM11 on my dad's S4 since he is always complaining about AT&T bloatware. He is running the absolute latest update from AT&T and never rooted or anything. I was able to successfully root it using the extSdCard method, but then made the mistake of trying to flash TWRP.
After a couple of failures, I went onto these forums to see that it is well documented that custom recoveries do not work with the latest firmware. Noted, and I will keep an eye out for updates to this issue.
My questions:
Since the goal was only to install Cyanogenmod 11, I would have just run the CM Windows Installer if I wasn't trying to create a full stock backup first (hence why I tried rooting and installing TWRP first). Since that is no longer an option, has anyone attempted to use the CM Windows Installer on the MF3 build? I assume that if a custom recovery cannot be installed that this method will not work, but was just wondering if anyone has had success.
The more important questions...
Since the stock recovery is now gone, will this create an issue if a new OTA update is released and he attempts to install? I am wondering if the OTA updates rely on the existing recovery to complete the update or if the OTA will rebuild it before installing the update?
Lastly, are there reliable methods for restoring the stock recovery?
Thanks everyone!
Click to expand...
Click to collapse
In addition to the above post from jd, the CM installer will not work on our device as our bootloader is locked. There is no way to run any AOSP based ROM once your phone is on MF3 firmware or higher.
DarthVayda said:
Hello, so even though I'm fairly new to the world of custom ROM's I feel as though this website has provided me with more than sufficient information for me to keep on flashing. I've flashed a few ROM's in the past but I'm currently stuck as for what I should do next. I currently have an S4 ATT MF3 which I would like to upgrade to MK2 so that I can put a 4.4.2. ROM via Safestrap using the Deadly Venom method.
Based on the guide (http://forum.xda-developers.com/showthread.php?t=2573080) I need to boot into the stock recovery and flash stock MF3 then MK2 which I can then root and safestrap. When I added my first ROM on this device I replaced the stock ROM (I have a hatred for TouchWiz) and replaced with a GPE ROM.
My phone can no longer boot into the stock Samsung recovery, it merely just bootloops instead, but I can still flash via Safestrap. So what should I do? Can I get the stock recovery back? Would I have any issues if I flash the MK2 update via Safestrap instead of the stock recovery? Will flashing the MF3 stock tar via Odin be all that I need to do? Any advice would be appreciated!
Click to expand...
Click to collapse
pravus87 said:
So after (stupidly) assuming that I knew what I was doing since I have been rooting/flashing/breaking/fixing my S3 for two years now that I would be able to easily install CM11 on my dad's S4 since he is always complaining about AT&T bloatware. He is running the absolute latest update from AT&T and never rooted or anything. I was able to successfully root it using the extSdCard method, but then made the mistake of trying to flash TWRP.
After a couple of failures, I went onto these forums to see that it is well documented that custom recoveries do not work with the latest firmware. Noted, and I will keep an eye out for updates to this issue.
My questions:
Since the goal was only to install Cyanogenmod 11, I would have just run the CM Windows Installer if I wasn't trying to create a full stock backup first (hence why I tried rooting and installing TWRP first). Since that is no longer an option, has anyone attempted to use the CM Windows Installer on the MF3 build? I assume that if a custom recovery cannot be installed that this method will not work, but was just wondering if anyone has had success.
The more important questions...
Since the stock recovery is now gone, will this create an issue if a new OTA update is released and he attempts to install? I am wondering if the OTA updates rely on the existing recovery to complete the update or if the OTA will rebuild it before installing the update?
Lastly, are there reliable methods for restoring the stock recovery?
Thanks everyone!
Click to expand...
Click to collapse
Here is the MF3 stock recovery, flash in PDA slot in Odin(AP in Odin v3.09+): https://mega.co.nz/#!klcz1B4J!BVAno0CcaJ7aXc9tHgUtpQ0vy_NF5ceh7RogLR6JBTU
muniz_ri said:
Here is the MF3 stock recovery, flash in PDA slot in Odin(AP in Odin v3.09+): https://mega.co.nz/#!klcz1B4J!BVAno0CcaJ7aXc9tHgUtpQ0vy_NF5ceh7RogLR6JBTU
Click to expand...
Click to collapse
Thanks to everyone for all the information, and thank you especially for sharing the link. I am staying with my parents short-term in a very rural area with awful internet and I was dreading downloading the 2+GB stock firmware file just to get recovery back. This is perfect. Thanks again!
I am on 5.0.1 rooted with stock ROM and stock kernel. I recently got 5.1 upgrade notification.
After downloading the data and restarting the phone, it started installing updates and after a while it showed "error" and stopped.
Now I m on 5.0.1 with no 5.1 upgrade notice.
What is wrong and what should I do for this?
Thank you.
Do I need to unroot? I am on stock kernel and ROM.
mike_24_11 said:
Do I need to unroot? I am on stock kernel and ROM.
Click to expand...
Click to collapse
Yes, you need to unroot before you can apply the OTA upgrade. Look for the Nexus Root Toolkit, and it should be able to clean up for you.
But prior I didn't need to unroot to upgrade anytime! To upgrade JB to KK or KK to LP, I didn't unroot before installation.
you need stock recovery to update via OTA
Yeah I was on pure stock. Stock ROM kernel and recovery.
Btw, I unrooted my phone with simply unroot and then OTA update went well.
So now I am on stock 5.1 unrooted.
Thank u all.
i have troubles as well. i unrooted, installed stock recovery (via n4 toolkit) and tryed to install. it takes longer then before but i stell get an error. SuperSU is gone in my app drawer.. any other help?
PS: i am on stock rom 5.0.1
i tryed to use sideload ADB update. it says: "/system/bin/app_process32" has unexpected contents. Error in sideload/package.zip. Status 7
any tipps?
i was able to take part one of the update which i think did something to Root....when I open SuperSU it says cant install binary, may need to re-root. I don't want root anymore. I tried second OTA update and fails.
I'm guessing i just have to odin flash a stock img?...my question is, can i do the lollipop one? or do i have to do kitkat and just take the OTA? also, does it matter which version of kitkat or lollipop?
thanks!
download the latest stock rom from somewhere, and flash with odin or flashfire. That should be all you need to do.
thanks...just flashed one of the lollipops and worked great! didnt have to even kept data and custom went away!
Ok say i have kitkat 4.4.4 and cannot update to lolipop via System Update because my root was messed up due to earlier update. I want to know if i can update to lolipop using Odin and obtain a root for it. i am on stock kernel now with root and i was wondering if it will work before i flash back to 4.4.
If you use odin to flash you will loose root and any custom recovery you have installed so you will have to reroot etc after upgrade.