Hi
they are many way to update your ASUS ZenFone 2 ZE551ML but in this thread you learn how to do safely
1st you need Micro sdcard with 2Gb at the minimums
2nd go to this thread and download your last Firmwares "remember cheek your SKU (CU-CHN-WW)" after download copy the .zip file to your SD card
3rd put your SD card in you ZE551ML and power on your device with holding Volume down and power key
choose Update mode, in update mode select the update from external storage and select your .zip
let update complete
*if you want to have faster and stable device after update use format & wipe date and partition
good luck
hi sir,
may i know why there is a need to reflash? Cos i had seen quite a number of post regarding flashing the ROM.
Why do you need to update to the same Firmware as it came? You can just wipe it in settings.
Is possible to change firmware from TW to WW?
afrugone said:
Is possible to change firmware from TW to WW?
Click to expand...
Click to collapse
Not unless you want network issues or worse! So it's generally not recommended for most devices unless explicitly and officially stated.
Sent from the Ace's Tapatalk 4
afrugone said:
Is possible to change firmware from TW to WW?
Click to expand...
Click to collapse
I don't see that as comepletly true. I have TW version and came with TW Rom. OTA switched software to WW. So I guess and that that guess to heart that it isn't that bad
Aceofzeroz said:
Not unless you want network issues or worse! So it's generally not recommended for most devices unless explicitly and officially stated.
Sent from the Ace's Tapatalk 4
Click to expand...
Click to collapse
Hello everyone I wanted to ask for help if possible. I bought from china the ZE551ML (ASUS_Z00ADB) unfortunately I received the CN version, on the site of the store was not specified anything and I thought it was the WW now I live in Italy and version CN has no service google, nothing playstore, gmail etc. and especially the 4G network does not work, before you start shipping procedures and reimbursement, wanted to know if is possible to change the software from CN to WW and as if you have to do, thank you very much and sorry for my bad English
s27moto said:
3rd put your SD card in you ZE551ML and power on your device with holding Volume down and power key
Click to expand...
Click to collapse
Are you sure it works for ZE551ML?
For me holding Power + VolDown doesn't start to boot. Phone silently (without vibrating and screen activity) enter to some strange mode. It's not easy to exit. Usually random holding power with volume buttons exits from this mode.
There is fastboot entering procedure with Power + VolUp (instead of VolDown), but there is no option to update from SD card.
no one can help me?
flaflasat said:
no one can help me?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3085514 read there
Sent from my Nexus 7
lordpipa said:
http://forum.xda-developers.com/showthread.php?t=3085514 read there
Sent from my Nexus 7
Click to expand...
Click to collapse
I read but there is no explanation of how to change from CN to WW.
uff not know what to do to have a phone like that and use it as an ornament
Well what u have to do is flash it. I will say that if you are not sure don't do it and try to play with your APN first.
lordpipa said:
Well what u have to do is flash it. I will say that if you are not sure don't do it and try to play with your APN first.
Click to expand...
Click to collapse
The APN is in fact the right sim works in H + but no 4G LTE.
The problem is that I do not know the procedure to install the firmware WW if you can explain to me how to do it thank you
flaflasat said:
The APN is in fact the right sim works in H + but no 4G LTE.
The problem is that I do not know the procedure to install the firmware WW if you can explain to me how to do it thank you
Click to expand...
Click to collapse
What operating system are u on?
On this computer i have osx but i can use in other PC windows 8.1
flaflasat said:
On this computer i have osx but i can use in other PC windows 8.1
Click to expand...
Click to collapse
Just download driver and platform tools Folder. Download the file u want to flash. If it's a system image extract it on the platform tools Folder. Connect your phone and in platform tools open a terminal. Enable adb on your phone and type on the terminal adb devices. If it gives you a number then type adb fastboot reboot. Phone will reboot in fastboot and then type on terminal fastboot flash system system.img. It'll take a while but it'll tell u when it's done. Then reboot phone. If all is good your phone will be on WW.
lordpipa said:
Just download driver and platform tools Folder. Download the file u want to flash. If it's a system image extract it on the platform tools Folder. Connect your phone and in platform tools open a terminal. Enable adb on your phone and type on the terminal adb devices. If it gives you a number then type adb fastboot reboot. Phone will reboot in fastboot and then type on terminal fastboot flash system system.img. It'll take a while but it'll tell u when it's done. Then reboot phone. If all is good your phone will be on WW.
Click to expand...
Click to collapse
The downloaded firmware is zip file (UL-Z00A-WW-2.13.40.13-user.zip)
This procedure is only for windows no osx
flaflasat said:
The downloaded firmware is zip file (UL-Z00A-WW-2.13.40.13-user.zip)
This procedure is only for windows no osx
Click to expand...
Click to collapse
Didn't u tell me that u can get on a Windows 8.1?
---------- Post added at 10:41 AM ---------- Previous post was at 10:40 AM ----------
flaflasat said:
The downloaded firmware is zip file (UL-Z00A-WW-2.13.40.13-user.zip)
This procedure is only for windows no osx
Click to expand...
Click to collapse
http://www.asus-zenfone.com/2015/04/how-to-flash-asus-zenfone-2.html?m=1
lordpipa said:
Didn't u tell me that u can get on a Windows 8.1?
---------- Post added at 10:41 AM ---------- Previous post was at 10:40 AM ----------
http://www.asus-zenfone.com/2015/04/how-to-flash-asus-zenfone-2.html?m=1
Click to expand...
Click to collapse
Yes i have pc with windows 8.1 but only from monday at work, now i hav only mac osx or tablet with windows 8.1 full I might try the tablet through otg
flaflasat said:
Yes i have pc with windows 8.1 but only from monday at work, now i hav only mac osx or tablet with windows 8.1 full I might try the tablet through otg
Click to expand...
Click to collapse
Cool
Related
Could anyone upload a stock build.prop back up of the note 3. i tried getting tegra effects on my device and ended up with the black screen of death
1- Wrong forum
2- What is your model number?
3- BLACK screen of death?
Sent from my SM-N900W8
yulet said:
1- Wrong forum
2- What is your model number?
3- BLACK screen of death?
Sent from my SM-N900W8
Click to expand...
Click to collapse
N900 i know this is the wrong forum sorry, i kinda needs this though. can get into recovery can get into download mode odin detects however i it doesnt boot past the startup screen. doesnt even get to the boot animation.
zephyr69 said:
N900 i know this is the wrong forum sorry, i kinda needs this though. can get into recovery can get into download mode odin detects however i it doesnt boot past the startup screen. doesnt even get to the boot animation.
Click to expand...
Click to collapse
Just flash the stock ROM for your model with ODIN. It'll take less time than waiting for somebody to post the file (unless.. a miracle happens.).
Sent from my SM-N900W8
yulet said:
Just flash the stock ROM for your model with ODIN. It'll take less time than waiting for somebody to post the file (unless.. a miracle happens.).
Sent from my SM-N900W8
Click to expand...
Click to collapse
I figured however i have limited bandwith where i am now and will only be able to download the stock next weekend. want to get my phone up and running asap
Have you got an authorised PC to push the file from? I'm certain to get adb access in 4.3, you get prompted to authorise the connecting machine, a security feature, if that's the case and you haven't done it, you may not new able to rectify your phone anyway, without the full firmware?
Sent from my SM-N9005 using Tapatalk
RavenY2K3 said:
Have you got an authorised PC to push the file from? I'm certain to get adb access in 4.3, you get prompted to authorise the connecting machine, a security feature, if that's the case and you haven't done it, you may not new able to rectify your phone anyway, without the full firmware?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
i havent pushed the file via ADB, i have done so using build.prop editor. i then by accident wiped my internal sd thus having no back up of the file. i just need the stock build.prop file so that i can push it back via custom recovery.
Please Help! after adding a line in build.prop to use android l bar my phone is black
Dear all,
after I add a line in build.prop (qemu.hw.mainkey=0)to get android l bar.
After restart I get black screen. so now I like to change back to my safe file.
have someone solution for me to get back my device?
I use Note 3 n9005 kitkat 4.4.2 . rooted.
how I can push this file via adb? even my device is not listed.
I really hope someone can help me
thanks in advanced
Try to flash stock firmware via Odin?
vndnguyen said:
Try to flash stock firmware via Odin?
Click to expand...
Click to collapse
thx for answer me.
is this the only solution I have?
jokertest said:
Dear all,
after I add a line in build.prop (qemu.hw.mainkey=0)to get android l bar.
After restart I get black screen. so now I like to change back to my safe file.
have someone solution for me to get back my device?
I use Note 3 n9005 kitkat 4.4.2 . rooted.
how I can push this file via adb? even my device is not listed.
I really hope someone can help me
thanks in advanced
Click to expand...
Click to collapse
Can you get into recovery?
AO7 said:
Can you get into recovery?
Click to expand...
Click to collapse
Yes I can get recover and download mode. so I tried adb but windows not load my device. so adb pull /system/build.prop not work. is it possible do use apply update from adb or use a update.zip via external storage, if yes how do I have to make this zip?
jokertest said:
Yes I can get recover and download mode. so I tried adb but windows not load my device. so adb pull /system/build.prop not work. is it possible do use apply update from adb or use a update.zip via external storage, if yes how do I have to make this zip?
Click to expand...
Click to collapse
Check to make sure if the correct driver for your device has been installed.
You can install Kies to get the driver also installed.
vndnguyen said:
Check to make sure if the correct driver for your device has been installed.
You can install Kies to get the driver also installed.
Click to expand...
Click to collapse
The Driver and adb work correctly you can see in my pic.
the first is my phone without listing and the second is from my wife with listed.
jokertest said:
is it possible do use apply update from adb or use a update.zip via external storage, if yes how do I have to make this zip?
Click to expand...
Click to collapse
Check these thread, I have not tested it.
http://forum.xda-developers.com/showthread.php?t=2163974
http://www.xda-developers.com/android/easily-create-recovery-compatible-archives-with-zip-creator/
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=269061234
vndnguyen said:
Check these thread, I have not tested it.
http://forum.xda-developers.com/showthread.php?t=2163974
http://www.xda-developers.com/android/easily-create-recovery-compatible-archives-with-zip-creator/
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=269061234
Click to expand...
Click to collapse
I tried this but not work.
I get: footer wrong and signature verification failed. I tried this via adb side load and update from external storage.
usb driver in windows will only load in adb sideload
another idea?
Have you tried factory restore?
I'm not sure but maybe it would rebuild it?
MystaMagoo said:
Have you tried factory restore?
I'm not sure but maybe it would rebuild it?
Click to expand...
Click to collapse
mmh just tried but same state as before.
so I really think I have to flash stock rom. But how about the root. I use towelroot before so knoxx show 0x0.
will flash stockroom change knoxx 0x1. Any special for flash stockrom?
zephyr69 said:
Could anyone upload a stock build.prop back up of the note 3. i tried getting tegra effects on my device and ended up with the black screen of death
Click to expand...
Click to collapse
you should always make a copy of the rom, I have roms and firmwares at my site...
happened to me 2 days ago, I changed one hltexx to hlte or hltetmo to get my correct icons, and black screen, I just flash my good rom, keep a good copy on your sdcard or ext. so u can flash back, or restore ur backup nandroid copy.
http://www.androidfilehost.com/?w=devices&uid=9390248398092763634
zephyr69 said:
Could anyone upload a stock build.prop back up of the note 3. i tried getting tegra effects on my device and ended up with the black screen of death
Click to expand...
Click to collapse
here is my back up build.prop from note 3 n9005 UK without the f...g line I add for l bar. hope you can push to your device and it work.
for me I not have solution to get my phone to run
Hey there
Today I got a message that I could update my Yoga 2 Tablet via the System Updater, but it doesn't quite work.
First of all about the device:
Lenovo Yoga 2 Tablet 1050F
Running current version: YT-1050F_USR_S0000198_1504220313_WW21_ROW
New version I wanna update to: YT2-1050F_USR_S1000031_1506111400_WW52_ROW
The problem:
I can download the update and when I press the install button, the tablet reboots into recovery mode. The update process begins and reaches 100% pretty quickly. After some time, it says the update failed though.
What I tried so far:
Downloading and updating again, it didn't work.
Download and starting the update on my PC with Lenovo Smart Assistant, didn't work.
Change the country code with the easyimage.zip file and the ####6020# code. I changed it to de (which is my usual country code) and us, but both did not help with the software update.
So... I really do not have any knowledge about android and can't seem to find another clue what to do next. Maybe someone of you can help me with this issue.
bjorr said:
Hey there
Today I got a message that I could update my Yoga 2 Tablet via the System Updater, but it doesn't quite work.
First of all about the device:
Lenovo Yoga 2 Tablet 1050F
Running current version: YT-1050F_USR_S0000198_1504220313_WW21_ROW
New version I wanna update to: YT2-1050F_USR_S1000031_1506111400_WW52_ROW
The problem:
I can download the update and when I press the install button, the tablet reboots into recovery mode. The update process begins and reaches 100% pretty quickly. After some time, it says the update failed though.
What I tried so far:
Downloading and updating again, it didn't work.
Download and starting the update on my PC with Lenovo Smart Assistant, didn't work.
Change the country code with the easyimage.zip file and the ####6020# code. I changed it to de (which is my usual country code) and us, but both did not help with the software update.
So... I really do not have any knowledge about android and can't seem to find another clue what to do next. Maybe someone of you can help me with this issue.
Click to expand...
Click to collapse
I posted the same issue already within the root thread. My device is rooted and after the download it started to upgrade and after reaching 100% it says it failed. I even did a factory reset - but SuperSu stays present and no upgrade is possible. I do not want to flash it via flashify - as bricking might be possible with that methode.
Maybe anyone has an idea how to proceed!?
Thanks for the reply.
I forgot to mention, my tablet isn't rooted and I tried a factory reset aswell, but nothing worked.
/E: So if anyone has the same problem: The solution is to flash the tablet to stack rom with PhoneFlashTool and update it afterwards. No problems since.
I flashed to stock rom downloaded from Russian Site with Phoneflashtool and tried to update. Update went to 100% then "failed". Any ideas anyone?
bowyerv said:
I flashed to stock rom downloaded from Russian Site with Phoneflashtool and tried to update. Update went to 100% then "failed". Any ideas anyone?
Click to expand...
Click to collapse
You missed presumably one important step after flashing the original rom, changing the country code prior OTA - which was posted already in another thread:
If system update fails do the following:
1. Flash stock firmware
2. Optionally you can wipe user data (I never did that) from DROIDBOOT
3. Go to contacts manager. Create some dummy contact if list is empty.
4. Go to Search / Find Contacts and enter ####6020#. It will ask you to select country code (first two latin letters, ignore Chinese).
5. Select what you want, then reboot.
6. Go to System Update
7. Install OTA update
Thanks. Will give that a go.
/E After the above it now tells me that I already have the latest version at YT2-1050F_USR-S000198_1504220313_WW21_ROW and that there is no update. Surely they have not taken the update offline??!
/EE I used the Update.zip I had previously downloaded (when the update first failed).
Placed this on the SD card and installed it via the update tools.
Thank you for those who helped me
Is there any chance You can upload this update.zip file? Thanks
Link to Lollipop Update.zip for YT2-1050F
worek555 said:
Is there any chance You can upload this update.zip file? Thanks
Click to expand...
Click to collapse
The storage I use wont let me link to my uploaded file! I have provided you the link by PM
Exactly the same problem. The ####6020# not work. Before m'y tablette was rooted but now after flash with easyimage, the stock ROM is OK but no update. I'm verry disapointed. Can you help me?
Thanks
1050F. Update fails.
Hi people, new guy here. I got redirected by some friendly dude.
Anyway, I apparantly have the same problem. Device has never been rooted. Tried the update as is, tried after a factory reset, tried #### contact hocus pocus, did not try anything involving a PC since I don't have one with that still has Windows and I can't seem to figure out Wine dependencies on my Debian box.
So, yeah, I guess I'll call the 1 euro a minute Lenovo support desk now. :laugh:
Anyway, thanks for having me, I'm subscribed to the thread . If I find out something before you guys do I'll let you know, but by all means don't stay up for it.
AgentAmsterdam said:
Hi people, new guy here. I got redirected by some friendly dude.
Anyway, I apparantly have the same problem. Device has never been rooted. Tried the update as is, tried after a factory reset, tried #### contact hocus pocus, did not try anything involving a PC since I don't have one with that still has Windows and I can't seem to figure out Wine dependencies on my Debian box.
So, yeah, I guess I'll call the 1 euro a minute Lenovo support desk now. :laugh:
Anyway, thanks for having me, I'm subscribed to the thread . If I find out something before you guys do I'll let you know, but by all means don't stay up for it.
Click to expand...
Click to collapse
I run Arch on all my machines. I was able to use my virtualbox windoze 8.1 (It came on my laptop but never booted it... ) vm to use the intelphonetool. I flashed this stock rom here and then took the ota lollipop update. If you want to root this works in Linux.
BTW... temporary Windows vm's can be found here
Guichinga said:
I posted the same issue already within the root thread. My device is rooted and after the download it started to upgrade and after reaching 100% it says it failed. I even did a factory reset - but SuperSu stays present and no upgrade is possible. I do not want to flash it via flashify - as bricking might be possible with that methode.
Maybe anyone has an idea how to proceed!?
Click to expand...
Click to collapse
Guichinga said:
You missed presumably one important step after flashing the original rom, changing the country code prior OTA - which was posted already in another thread:
If system update fails do the following:
1. Flash stock firmware
2. Optionally you can wipe user data (I never did that) from DROIDBOOT
3. Go to contacts manager. Create some dummy contact if list is empty.
4. Go to Search / Find Contacts and enter ####6020#. It will ask you to select country code (first two latin letters, ignore Chinese).
5. Select what you want, then reboot.
6. Go to System Update
7. Install OTA update
Click to expand...
Click to collapse
workdowg said:
I run Arch on all my machines. I was able to use my virtualbox windoze 8.1 (It came on my laptop but never booted it... ) vm to use the intelphonetool. I flashed this stock rom here and then took the ota lollipop update. If you want to root this works in Linux.
BTW... temporary Windows vm's can be found here
Click to expand...
Click to collapse
i have same problem and i don`t know what can i do
semsem81 said:
i have same problem and i don`t know what can i do
Click to expand...
Click to collapse
I don't know which problem you have...
Rooted and go back to stock to take OTA?
Return to stock KK firmware - Yoga Tablet 2 1050F
1) Download - This - AFH - kitkat-YT2-1050F_S0198_150422_ROW.7z
2) Extract the zipfile to a directory on PC somewhere
3) Goto "tools" folder and install the exe's in this order
__a)PhoneFlashTool_4.4.4.1_external_win32.exe
__b)iSocUSB-Driver-Setup-1.2.0.exe
__c)IntelAndroidDrvSetup1.5.0.exe
4) Start PhoneFlashTool and select settings (Upper left corner)
5) Tick "force sparcing" and change size to 500mb
6) Power off tablet and connect with usb
7) From off, hold volume up and power until tablet vibrates and release power (still holding volume up)
8) Tablet should now be in "Droidboot" and PhoneFlashTool should list it on the top
9) In PhoneFlashTool click browse and select flash.xml from the "target_bin" folder
10) WAIT!!! until you see "Result okay" on tablet AND "Flash Sucess" in PhoneFlashTool
11) Reboot
12) When Android starts skip all dialogs (tablet is going to factory reset anyway)
13) Select Contacts from desktop and make 1 dummy contact
14) In the search bar type "####6020#" and then select your country
15) Tablet reboots and you are on stock KitKat again and should receive an update notice for Lollipop
Click to expand...
Click to collapse
Stuck on bios after FAILED Lollipop to Kitkat downgrade?
Repair Lollipop to KitKat bios error
1) Get the firmware kitkat-YT2-1050F_S0198_150422_ROW.7z - https://www.androidfilehost.com/?fid=24052804347778640
2) Extract the firmware on PC
3) Download LtoKKxml.7z - https://www.androidfilehost.com/?fid=24052804347783496
4) Extract or copy the content of this zip to where you extracted the firmware, so that the flash_*.xml are located next to all the image files of the firmware
5) Edit the file flash-LtoKK_PVT_810.xml and remove the the "command" tags which contain "format data" and "erase data" (the XML tag from <command> to </command>)
6) Reboot your tablet into fastboot mode (hold power up, down and power buttons)and use PhoneFlashTool to flash this flash-LtoKK_PVT_810.xml
7) Wait for it to finish and when the tablet restarts make sure it goes back to fastboot. If not then power off and restart into fastboot
8) Flash the flash.xml which is located in the folder. This will flash all the KitKat firmware components. That's it.
Be careful if you do something wrong then a brick is very likely. Hope this helps
Originally posted by [email protected]
These are links to other variant firmwares (not my hosting):
830F: YT2-830F_S0195_150422_ROW.7z - https://cloud.mail.ru/public/Z2US9gd6f2ei/YT2-830F_S0195_150422_ROW.7z
830L: YT2-830L_S0209_150422_ROW.7z - https://cloud.mail.ru/public/2hrDmzneLDLY/YT2-830L_S0209_150422_ROW.7z
1050L YT2-1050L_S0225_150422_ROW.7z - https://cloud.mail.ru/public/2GFji3ub9JdG/YT2-1050L_S0225_150422_ROW.7z
1380L YT2 -1380L_S0216_150428_ROW.7z - https://cloud.mail.ru/public/CGZs/Nt8NE1pit
1380F YT2-1380F_S0219_150428_ROW.7z - https://cloud.mail.ru/public/8s5Q/dfuSXn7oi
Click to expand...
Click to collapse
Root Lollipop or Kitkat?
Root Lollipop or Kitkat on 1050F - 8/4/2015
Windows PC:
Thread by [email protected] - http://forum.xda-developers.com/showpost.php?p=57543871&postcount=1
Lollipop - Trigger 4
Kitkat - Trigger 3
Linux PC:
Thread by [email protected] - http://forum.xda-developers.com/showpost.php?p=61067755&postcount=1
Lollipop - Trigger 4
Kitkat - Trigger 3
Click to expand...
Click to collapse
workdowg
I don't know which problem you have...
My device is rooted and after the download it started to upgrade and after reaching 100% it says it failed. I even did a factory reset
i don't know how to flash firmware and i wanna to update to 5.0
my device is yoga tablet 2-1050L
Deleted. Will update
---------- Post added at 02:34 PM ---------- Previous post was at 02:30 PM ----------
semsem81 said:
workdowg
I don't know which problem you have...
My device is rooted and after the download it started to upgrade and after reaching 100% it says it failed. I even did a factory reset
i don't know how to flash firmware and i wanna to update to 5.0
my device is yoga tablet 2-1050L
Click to expand...
Click to collapse
I'll post files for you. You were able to root your device, so I'm sure you can handle flashing back to stock. I need to sleep right now before work.
Sent from my YOGA Tablet 2-1050F
workdowg said:
Deleted. Will update
---------- Post added at 02:34 PM ---------- Previous post was at 02:30 PM ----------
I'll post files for you. You were able to root your device, so I'm sure you can handle flashing back to stock. I need to sleep right now before work.
Sent from my YOGA Tablet 2-1050F
Click to expand...
Click to collapse
thx for ur replay but i don't have experience to flashing stock and i rooted my device with luck
so its okay you can go to sleep and sorry to bother you
Some info, probably well known, but have a question about it.
Hi,
I found a folder 'lenovoota' om my tablet. It contains a file called YT2-1050F_USR_S000198_1504220313_WW21_ROW_TO_YT2-1050F_USR_S100067_1507101258_WW52_ROW.zip
and one called packages.xml.
Both can't be opened / are corrupt. 0 bytes each.
So, correct me if I'm wrong, the update fails at download already, right? Would it be of any use to get these two files somewhere and replace the corrupted ones, then trigger the updating process again? Or is that a bit optimistic?
Thanks.
I'm a bit reluctant about the instructions above btw. I know what's what, but, you know, *very* old machine running debian, not sure how VM would perform. Apart from that I am certainly going to be overly focussed on getting the details right and brick my tablet by forgetting a whole major step or something. THanks anyway, though, appreciate the effort.
---------- Post added at 09:24 AM ---------- Previous post was at 09:17 AM ----------
AgentAmsterdam said:
Hi,
I found a folder 'lenovoota' om my tablet. It contains a file called YT2-1050F_USR_S000198_1504220313_WW21_ROW_TO_YT2-1050F_USR_S100067_1507101258_WW52_ROW.zip
and one called packages.xml.
Both can't be opened / are corrupt. 0 bytes each.
So, correct me if I'm wrong, the update fails at download already, right? Would it be of any use to get these two files somewhere and replace the corrupted ones, then trigger the updating process again? Or is that a bit optimistic?
Thanks.
I'm a bit reluctant about the instructions above btw. I know what's what, but, you know, *very* old machine running debian, not sure how VM would perform. Apart from that I am certainly going to be overly focussed on getting the details right and brick my tablet by forgetting a whole major step or something. THanks anyway, though, appreciate the effort.
Click to expand...
Click to collapse
EDIT: ah wait I think I get it, the row / version thing. I'll check my current version and see what the linux thread has to offer...
AgentAmsterdam said:
Hi,
I found a folder 'lenovoota' om my tablet. It contains a file called YT2-1050F_USR_S000198_1504220313_WW21_ROW_TO_YT2-1050F_USR_S100067_1507101258_WW52_ROW.zip
and one called packages.xml.
Both can't be opened / are corrupt. 0 bytes each.
So, correct me if I'm wrong, the update fails at download already, right? Would it be of any use to get these two files somewhere and replace the corrupted ones, then trigger the updating process again? Or is that a bit optimistic?
Thanks.
I'm a bit reluctant about the instructions above btw. I know what's what, but, you know, *very* old machine running debian, not sure how VM would perform. Apart from that I am certainly going to be overly focussed on getting the details right and brick my tablet by forgetting a whole major step or something. THanks anyway, though, appreciate the effort.
---------- Post added at 09:24 AM ---------- Previous post was at 09:17 AM ----------
EDIT: ah wait I think I get it, the row / version thing. I'll check my current version and see what the linux thread has to offer...
Click to expand...
Click to collapse
Yes, it shows as 0 bytes when it fails.
I captured the OTA file from the 1050F. It is usable only on a non-rooted stock device and those devices should take the OTA successfully anyway... But it had the files I needed to repair the bios error from trying to downgrade from Lollipop to KitKat.
And I feel your pain with using a VM. My laptop is pretty new and I have my OEM copy of Windows on an external SSD so it works good enough.
I tried to port the Linux version of the Intel Phone Tool to Arch and it fails because of Ubuntu specific depens. You could certainly try it. If you get it installed and it see's your tablet you should be good. Let me know if it works.
See this thread: http://forum.xda-developers.com/thinkpad-tablet/general/how-to-one-guide-yoga-tablet-2-t3174597
workdowg said:
Yes, it shows as 0 bytes when it fails.
I captured the OTA file from the 1050F. It is usable only on a non-rooted stock device and those devices should take the OTA successfully anyway...
Click to expand...
Click to collapse
Well, mine is unrooted and it still fails... Ill check out that thread.
Hi there
So, im here because i got problem with my Yoga 2 10" 1050L
Well, i was trying to update my Yoga to 5.0.1 but my tablet says that there is no update.
I was tryin to use Lenovo Smart Assistant - same, no update.
Then i do hard reset (power button + vol+), fresh install, and... kitkat do not recognize any new updates to lollipop.
Then i contact with Lenovo Poland, they was tryin to turn on update from servers for my device - nothing happens.
I got 2 devices, both from Poland, second one (i got two same Yogas, both 1050L) is running 5.0.1 without any problems (it update itself instantly after 1st boot).
So, what can i do now?! Is it any possibilities to get update *.zip file from anywhere, to do it manualy from settings menu in tablet?
Sorry for my bad english, its still not my main )
Hi guys,
I hope anybody can help me. I'm looking for the latest firmware for my yoga tablet 2 1050L.
It should be YT2-1050L_USR_S100255_1601131716_WW52_ROW. At least that is what the OTA message shows me on my tablet.
After softbricking my tablet (was stuck in lenovo boot logo) when I installed this OTA update (162MB), I was able to recover it with firmware S100192. I checked also for country code and set it new. When I now try to install the OTA update I get an error and can only boot the tablet again and it wants me again to update to the S100255 firmware.
I also looked in the russion lenovo forum (you can translate with google into englsh or my case geman)
http://lenovo-forums.ru/forum/395-yoga-tablet-2-10-%D0%BF%D1%80%D0%BE%D1%88%D0%B8%D0%B2%D0%BA%D0%B8/
But there is the latest firmware I can download S100192.
So I would need either the S100255 firmware to flash it from stock or anybody can give me an hint in how to solve the udpate error
you cannot skip ota's, they are cummulative
ionioni said:
you cannot skip ota's, they are cummulative
Click to expand...
Click to collapse
Hi ionioni,
ok. what do you mean exactly? I don't want to skip it. I want to update it but it's showing error while the update process. and then when I am in Android again it wants me again to update to S100255. So I thought I could flash it with the latest stock rom S100255.
At the moment I try to flash an older stock rom like S100081 or S100225 (and then doing OTA hopefully) but whenever I try to flash it it boots into Android again when it should
C:\Program Files (x86)\Intel\Phone Flash Tool\fastboot.exe" "-S" "500M" "-s" "BaytrailABFF4CD2" "oem" "wipe" "ESP"` command
Iceball24 said:
Hi ionioni,
ok. what do you mean exactly? I don't want to skip it. I want to update it but it's showing error while the update process. and then when I am in Android again it wants me again to update to S100255. So I thought I could flash it with the latest stock rom S100255.
At the moment I try to flash an older stock rom like S100081 or S100225 (and then doing OTA hopefully) but whenever I try to flash it it boots into Android again when it should
C:\Program Files (x86)\Intel\Phone Flash Tool\fastboot.exe" "-S" "500M" "-s" "BaytrailABFF4CD2" "oem" "wipe" "ESP"` command
Click to expand...
Click to collapse
your initial message was a little ambiguos...
before flashing a stock rom go in Contacts and in the search contact box input ####0000# and tell me what he says under BIOS version
ionioni said:
your initial message was a little ambiguos...
before flashing a stock rom go in Contacts and in the search contact box input ####0000# and tell me what he says under BIOS version
Click to expand...
Click to collapse
OK.
Bios version: BLADE_21.X64.0005.R00.1504101447
Iceball24 said:
OK.
Bios version: BLADE_21.X64.0005.R00.1504101447
Click to expand...
Click to collapse
ok, you can flash a lollipop stock rom as you have the matching bios
first uninstall the Intel Phone Flash Tool you have now and install the one from here
then you can install using your stock lollipop rom if you have one or using this (if you download this flash it from DnX mode)
ionioni said:
ok, you can flash a lollipop stock rom as you have the matching bios
first uninstall the Intel Phone Flash Tool you have now and install the one from here
then you can install using your stock lollipop rom if you have one or using this (if you download this flash it from DnX mode)
Click to expand...
Click to collapse
ok, thx. I just downloaded it and try to flash it again. also set the Force fastboot sparsing to 500MB?
ionioni, I receive a crc error when unzipping the rom file....
Iceball24 said:
ok, thx. I just downloaded it and try to flash it again. also set the Force fastboot sparsing to 500MB?
Click to expand...
Click to collapse
if you use the rom i linked no need for additional settings (the sparse is in the xml already), just flash
---------- Post added at 16:19 ---------- Previous post was at 15:48 ----------
Iceball24 said:
ionioni, I receive a crc error when unzipping the rom file....
Click to expand...
Click to collapse
i just downloaded (i used the germany server as is closer to me and had some 10-12 MB/s) and it tested ok when unzipping
ionioni said:
if you use the rom i linked no need for additional settings (the sparse is in the xml already), just flash
---------- Post added at 16:19 ---------- Previous post was at 15:48 ----------
i just downloaded (i used the germany server as is closer to me and had some 10-12 MB/s) and it tested ok when unzipping
Click to expand...
Click to collapse
I downloaded it now from 3 servers and always get the CRC error. which program do you use? winrar. 7zip and which version?
Iceball24 said:
I downloaded it now from 3 servers and always get the CRC error. which program do you use? winrar. 7zip and which version?
Click to expand...
Click to collapse
the zip was made with winrar 5.xx (don't recall exactly the subversion)
ionioni said:
the zip was made with winrar 5.xx (don't recall exactly the subversion)
Click to expand...
Click to collapse
OK, I don't know why but it seems to be a problem within my office. I downloaded it at home and there I have no CRC issues.....
I will try to flash tomorrow than and hope it works. DnX mode is booting with both volume buttons into fastboot, right?
Iceball24 said:
OK, I don't know why but it seems to be a problem within my office. I downloaded it at home and there I have no CRC issues.....
I will try to flash tomorrow than and hope it works. DnX mode is booting with both volume buttons into fastboot, right?
Click to expand...
Click to collapse
yes, both vols pressed while powering on, screen will hang on 'fastboot starting...' message
ionioni said:
yes, both vols pressed while powering on, screen will hang on 'fastboot starting...' message
Click to expand...
Click to collapse
Ok, now I was finally (!) able to flash it and to boot it into android. Strange issue when I extracted your zip file on my HDDs on my company's notebook I got a zip CRC error. I unzipped it now directly on my USB drive (connected to my company laptop) to my external HDD and I had no issues. Only the devil knows why...???!
So after using your phone flash tool lite version 5.3.4.1 it worked now. I'm just downloading now the next OTA update over WLAN to version S100192. after that version S100255 should appear. let's see what happens Thank you so far.
Iceball24 said:
Ok, now I was finally (!) able to flash it and to boot it into android. Strange issue when I extracted your zip file on my HDDs on my company's notebook I got a zip CRC error. I unzipped it now directly on my USB drive (connected to my company laptop) to my external HDD and I had no issues. Only the devil knows why...???!
So after using your phone flash tool lite version 5.3.4.1 it worked now. I'm just downloading now the next OTA update over WLAN to version S100192. after that version S100255 should appear. let's see what happens Thank you so far.
Click to expand...
Click to collapse
maybe the hdd is near his EOL or maybe you have there some strange firewall? you should check as this sounds really odd
ionioni said:
maybe the hdd is near his EOL or maybe you have there some strange firewall? you should check as this sounds really odd
Click to expand...
Click to collapse
no don't think it's EOL as it was on both my harddisks and I have no problems with other files. Don't bother anymore.
Good news: was able to flash and update it OTA to the current Firmware S100256 (14MB) which has been released as there may have been some bugs to the S100255. and it works! Thank you very much! :silly::silly::good::good::good:
Hi Ionioni.
Sorry for bothering you, but I have same problem as Iceball24. Could you tell me what should be the settings for Phone Flash Tool to flash yoga properly?
Iceball24 said:
no don't think it's EOL as it was on both my harddisks and I have no problems with other files. Don't bother anymore.
Good news: was able to flash and update it OTA to the current Firmware S100256 (14MB) which has been released as there may have been some bugs to the S100255. and it works! Thank you very much! :silly::silly::good::good::good:
Click to expand...
Click to collapse
Good!
sanguine13 said:
Hi Ionioni.
Sorry for bothering you, but I have same problem as Iceball24. Could you tell me what should be the settings for Phone Flash Tool to flash yoga properly?
Click to expand...
Click to collapse
no settings
sanguine13 said:
Hi Ionioni.
Sorry for bothering you, but I have same problem as Iceball24. Could you tell me what should be the settings for Phone Flash Tool to flash yoga properly?
Click to expand...
Click to collapse
Maybe this can help you:
Make sure you use the latest Phone Flash tool (lite) which was 5.3.4.1 for me. Make sure you use a USB port at your laptop PC, don't use a hub (did not work for me). And If you are not able to flash it via the DnX mode (press both Volumen buttons and power on the tab) then try using the Fastboot mode in the bootloader (volume down and power on the tab).
Iceball24 said:
Maybe this can help you:
Make sure you use the latest Phone Flash tool (lite) which was 5.3.4.1 for me. Make sure you use a USB port at your laptop PC, don't use a hub (did not work for me). And If you are not able to flash it via the DnX mode (press both Volumen buttons and power on the tab) then try using the Fastboot mode in the bootloader (volume down and power on the tab).
Click to expand...
Click to collapse
Thank you.
Everything went very good. I downloaded linked Phone Tool and stock rom and flashed Yoga through Fastboot. Now my Yoga is updated
ionioni said:
Good!
no settings
Click to expand...
Click to collapse
Hi ionioni,
I'm back with a further problem. I just tried to start teamviewer on the yoga. I get an error that the firmware may be faulty and I should check for a proper IMEI. So I put in a SIM card (which I have used in anther phone) and I'm able to unlock it with the pin. But I get no data connection and also when I try to set a new PIN for the SIM card in the security settings I enter the PIN and it says wrong PIN I have 3 more trys. but I can try it as often as I want, it does not lock the SIM card.
So what may be the problem? any ideas?
UPDATE: Ok, just checked my IMEI online and it appears to be an IPHONE IMEI??
Update 2: Under settings, network, more, mobile connection (? just know the german word for the settings) I can not choose the menu as it is deactivated and grey. I just read that the tablet may think it is in flight mode?
My opx is the Chinese version- E1001.
having H2os V1.20 version .
I didn't used an oneplus phone before. surprised to see, there is no software update/ checker option.
i found a new update info on H2os official site.
but i have no idea how to install it on my opx.
can i do it directly by extracting the package?
or there is any specialized criteria?
plz help me with a simpler solution..........i dont understand android deeply.
note: my phone is not rooted....and i dont want to root it....at least right now,,,,as i dont understand it well.
i m really looking forward for ur kind solution......TIA
himumama11 said:
My opx is the Chinese version- E1001.
having H2os V1.20 version .
I didn't used an oneplus phone before. surprised to see, there is no software update/ checker option.
i found a new update info on H2os official site.
but i have no idea how to install it on my opx.
can i do it directly by extracting the package?
or there is any specialized criteria?
plz help me with a simpler solution..........i dont understand android deeply.
note: my phone is not rooted....and i dont want to root it....at least right now,,,,as i dont understand it well.
i m really looking forward for ur kind solution......TIA
Click to expand...
Click to collapse
there is a update option in settings. just scroll down to the end, it's right there.
alternatively you can download the ROM from the h2os.com website and transfer it to your phone with USB cable. then reboot to recovery,(when phone is off hold power and vol down button, after it vibrates let go off power button) select the file and flash. easy as that.
knauji said:
there is a update option in settings. just scroll down to the end, it's right there.
alternatively you can download the ROM from the h2os.com website and transfer it to your phone with USB cable. then reboot to recovery,(when phone is off hold power and vol down button, after it vibrates let go off power button) select the file and flash. easy as that.
Click to expand...
Click to collapse
i really cant find any update menu.
i cant attach a screenshot.........xda showing this.......
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
The manual way u mentioned.....is it safe? ..... just to be sure , i m not an expert on this.
You don't have that option? see picture.
the manual way is safe and really easy. just try it^^
knauji said:
You don't have that option? see picture.
the manual way is safe and really easy. just try it^^
Click to expand...
Click to collapse
no,,,,,,no option like that!!! :crying::crying::crying:
should i try the manual update u mentioned???
himumama11 said:
should i try the manual update u mentioned???
Click to expand...
Click to collapse
You can try. But be carefull. You must know what you have to do. I dont want you to kill your phone because we have the same variant. [emoji4]
But really weird. My fomer h2os have system update option and you are not.
Sent from my ONE E1001 using Tapatalk
himumama11 said:
should i try the manual update u mentioned???
Click to expand...
Click to collapse
when I got my phone from China, I had prepared already a USB stick with oxygen OS ROM. I plugged it in and went to recovery after unboxing! I flashed OOS right away. it is the same with H2OS. don't worry^^
---------- Post added at 05:18 ---------- Previous post was at 05:17 ----------
himumama11 said:
no,,,,,,no option like that!!! :crying::crying::crying:
Click to expand...
Click to collapse
that's very interesting. where did you buy it? not from oneplus website I guess..
knauji said:
when I got my phone from China, I had prepared already a USB stick with oxygen OS ROM. I plugged it in and went to recovery after unboxing! I flashed OOS right away. it is the same with H2OS. don't worry^^
---------- Post added at 05:18 ---------- Previous post was at 05:17 ----------
that's very interesting. where did you buy it? not from oneplus website I guess..
Click to expand...
Click to collapse
no....i got it from a 3rd party
himumama11 said:
no....i got it from a 3rd party
Click to expand...
Click to collapse
I understand that these resellers flash their own modified ROMs. just flash the original one and you'll be fine.
i found the following steps for OOS.....from oneplus forum.......is it okay? same for H2OS?
note: my microsd card is not shown on storage............but shown in file manager/ gallery.
will the procedure below okay with this??
1. Download OxygenOS
You have to download the last Full OxygenOS Rom available, you find it at the top of the thread
2. Put the file into MicroSD
Copy the file download into MicroSD with PC and insert into the OPX
3. Boot in Recovery Mode
Force Power Off holding the power button
Hold Power On + Volume Down to go to Recovery
Choose English
4. Install
Choose Install from SD Card
Select OxygenOS file .zip
Reboot after finish
yes. same procedure. just put the file in the main directory of your phone. not SD card. it is easier to find from recovery.
knauji said:
yes. same procedure. just put the file in the main directory of your phone. not SD card. it is easier to find from recovery.
Click to expand...
Click to collapse
ok.....i will try it....and let u know
himumama11 said:
ok.....i will try it....and let u know
Click to expand...
Click to collapse
OK. good night^^
It worked!!! Thanx a lot.....for all your help
Moreover...
I got my update button back!
My storage recognises SD card!!
After all the new features are awesome so far.
But still.....no move to SD card feature for apps.
And some issues with Google account.... Which I m trying to figure out.
Plz share any tips, that will improve my phone performance.
Again..... Thanx a lot for ur help...
Regards...
himumama11 said:
It worked!!! Thanx a lot.....for all your help
Click to expand...
Click to collapse
hehe great!
for more tips and infos read here first:
http://forum.xda-developers.com/oneplus-x/general/h2os-ota-feb-3-2016-released-t3307560
what's the problem with google account?
I don't use it anymore but had no problems when I had it.
Okay .....here's what I m facing.....
Google search: works
Google drive: works
Play games: works
Google doc's: works
Google maps: works
Street view: works
Gmail: after launching, it disappears to background
Play store: shows an error...something like can't find server.
I tried clearing cache/data.....no luck.
When I tried to uninstall the play store updates.... It uninstalled the play store apk completely.
On account menu , I can't remove the Google account either!
I tried sign out/ add account....doesn't work .
which gapps did you flash? try the ones from opengapps . I used pico and never had problems.
knauji said:
which gapps did you flash? try the ones from opengapps . I used pico and never had problems.
Click to expand...
Click to collapse
Pardon my ignorance... I don't understand the process/ terms u mentioned
Could u plz provide any link!
Note: I had my phone with play store installed and worked fine until last nights update.
NOTE-1:
I'm not a developer or something even near to that. All information provided here is copied from different internet sources like this & this & this and many others.
It's according to best of my knowledge and I'll not be responsible for any harm to you or your device. It works perfectly for me. You may try it on your own risk.
Save / backup your data before continuing. Whole device will be wiped.
NOTE-2:
If you have a custom recovery, install Stock ROM (v2.1.0.13 or v2.1.0.12) instead.
If you don't have a custom recovery, you may get one here or here.
If your device is bricked and can't boot into recovery or bootloader mode (read here what it is), proceed.
NOTE-3:
Given firmware link is v2.1.0.13 for device 059V782. There are some variants of Nokia X2DS (other product codes) which were officially updated from 2.1.0.11 to 2.1.0.12, so they dont support version 2.1.0.13.
Make sure your device supports 2.1.0.13 by googling your product code (written on back of device, see by removing back cover) or you may get in trouble. In case if you need 2.1.0.12, download it from some other link and follow the instructions given here.
NOTE-4:
Hard-bricked devices (with no buttons working, no Download Mode) may also be recovered by this method but with a slightly different procedure.
QFIL can also be used instead of NCS, but NCS feels a kinda little bit official way
REQUIREMENTS:
A PC with Windows and uninterrupted power supply. (I used Dell Inspiron 15R with Windows 8.1 and 10).
A USB data cable.
Fully charged phone, soft-bricked at maximum i.e. no recovery, no boot accessible
STEPS:
Download and Install NCS to your PC.
Copy UserGroupsConfiguration.cfg to "C:\Program Files (x86)\Nokia\Nokia Care Suite\Product Support Tool For Store 5".
Download Firmware and extract to "C:\ProgramData\Nokia\Packages\Products\RM-1013".
Launch NCS > Product Support Tool for Store 5.
At Sign-In screen, click Work Offline.
Disable Automatic Product Selection.
Go to File > Open Product and select RM-1013.
Click Programming > Recovery. Downloaded Firmware must be listed there.
Click Start and follow instructions. DO NOT INTERRUPT FLASHING PROCESS OR IT MAY HARD BRICK YOUR PHONE LEAVING IT USELESS.
Wait a few minutes and done. You have a newly purchased phone in your hands if all goes well.
Thanks for making a proper post for this.:good:
Devnikolus said:
Thanks for making a proper post for this.:good:
Click to expand...
Click to collapse
There are many others but mine is simple and solid
mirfatif said:
NOTE:
I'm not a developer or something even near to that. All information provided here is copied from different internet sources and according to best of my knowledge.
I'll not be responsible for any harm to you or your device. It works perfectly for me. You may try it on your own risk.
Save / backup your data before continuing. Whole device will be wiped.
REQUIREMENTS:
A PC with Windows and uninterrupted power supply. (I used Dell Inspiron 15R with Windows 8.1 and 10).
A USB data cable.
Fully charged phone, soft-bricked at maximum i.e. no recovery, no boot accessible
STEPS:
Download and Install NCS to your PC.
Copy UserGroupsConfiguration.cfg to "C:\Program Files (x86)\Nokia\Nokia Care Suite\Product Support Tool For Store 5".
Download Firmware and extract to "C:\ProgramData\Nokia\Packages\Products\RM-1013".
Launch NCS > Product Support Tool for Store 5.
At Sign-In screen, click Work Offline.
Disable Automatic Product Selection.
Go to File > Open Product and select RM-1013.
Click Programming > Recovery. Downloaded Firmware must be listed there.
Click Start and follow instructions. DO NOT INTERRUPT FLASHING PROCESS OR IT MAY HARD BRICK YOUR PHONE LEAVING IT USELESS.
Wait a few minutes and done. You have a newly purchased phone in your hands if all goes well.
Click to expand...
Click to collapse
Bro, i got an error with
Initializing WinUSB with device handle. The parameter is incorrect
Exception:
System.ComponentModel.Win32Exception (0x80004005): Initializing WinUSB with device handle. The parameter is incorrect
at Nokia.Merak.UsbDeviceIo.WinUsbIo.CheckError(Boolean expression, String message)
at Nokia.Merak.UsbDeviceIo.WinUsbIpen()
at Nokia.Merak.UsbDeviceIo.UsbDeviceIo..ctor(String devicePath)
at Nokia.Delta.Messaging..ctor(ConnectionDetails details)
at Nokia.CareSuite.PlugIns.DeltaRecovery.RecoveryDialog.RecoveryDialogModel.ChangeDeviceMode()
at Nokia.CareSuite.PlugIns.DeltaRecovery.RecoveryDialog.RecoveryDialogModel.Flash()
at Nokia.CareSuite.PlugIns.DeltaRecovery.RecoveryDialog.RecoveryDialogModel.<HandleDownloadVariantPackageCompleted>b__15(Object state)
please help phone not booting
himanagendra said:
Bro, i got an error with
Initializing WinUSB with device handle. The parameter is incorrect
Exception:
System.ComponentModel.Win32Exception (0x80004005): Initializing WinUSB with device handle. The parameter is incorrect
at Nokia.Merak.UsbDeviceIo.WinUsbIo.CheckError(Boolean expression, String message)
at Nokia.Merak.UsbDeviceIo.WinUsbIpen()
at Nokia.Merak.UsbDeviceIo.UsbDeviceIo..ctor(String devicePath)
at Nokia.Delta.Messaging..ctor(ConnectionDetails details)
at Nokia.CareSuite.PlugIns.DeltaRecovery.RecoveryDialog.RecoveryDialogModel.ChangeDeviceMode()
at Nokia.CareSuite.PlugIns.DeltaRecovery.RecoveryDialog.RecoveryDialogModel.Flash()
at Nokia.CareSuite.PlugIns.DeltaRecovery.RecoveryDialog.RecoveryDialogModel.<HandleDownloadVariantPackageCompleted>b__15(Object state)
please help phone not booting
Click to expand...
Click to collapse
You followed instructions 100%? Install NCS from my given link. It contains all necessary drivers including Emergency Driver. Use some other USB port on your PC. Try reinstalling NCS or try on different PC / different OS. You may also try QFIL if NCS doesn't work.
mirfatif said:
You followed instructions 100%? Install NCS from my given link. It contains all necessary drivers including Emergency Driver. Use some other USB port on your PC. Try reinstalling NCS or try on different PC / different OS. You may also try QFIL if NCS doesn't work.
Click to expand...
Click to collapse
thank god you are still there. okay here is the result.
Phone is not responding.
charging - > no indication, no screen
Volume down/up + power -> nothing. no response.
Do you know any softwares which can flash my phone without using volume up/down + power .
tnzzz for help
himanagendra said:
thank god you are still there. okay here is the result.
Phone is not responding.
charging - > no indication, no screen
Volume down/up + power -> nothing. no response.
Do you know any softwares which can flash my phone without using volume up/down + power .
tnzzz for help
Click to expand...
Click to collapse
Hmm it's hard bricked. No problem. Follow this thread. Things are explained more clearly there.
mirfatif said:
Hmm it's hard bricked. No problem. Follow this thread. Things are explained more clearly there.
Click to expand...
Click to collapse
thank you very much for your help but unfortunately it didn't work bcz as i told, nothing will comeup and even the buttons don't work.
In that case, please follow this thread
himanagendra said:
thank you very much for your help but unfortunately it didn't work bcz as i told, nothing will comeup and even the buttons don't work.
In that case, please follow this thread
Click to expand...
Click to collapse
Good. I suggested you to use QFIL already For me, both NCS and QFIL work but I didn't try any other product code firmware except 059V782 which is my device code.
What's your product code? 059V787 or 059V782? I'm gonna add a warning to my thread about this.
There are some devices which were officially updated from 2.1.0.11 to 2.1.0.12, so they don't support 2.1.0.13 as per my understanding.
mirfatif said:
Good. I suggested you to use QFIL already For me, both NCS and QFIL work but I didn't try any other product code firmware except 059V782 which is my device code.
What's your product code? 059V787 or 059V782?
Click to expand...
Click to collapse
Yeah...i thought you would give me a direct link. Anyways thanks for u help.
But bro, please mention that v2.1.0.13 don't suit for every Nokia x2 device. It doesn't suit the Indian version.
himanagendra said:
Yeah...i thought you would give me a direct link. Anyways thanks for u help.
But bro, please mention that v2.1.0.13 don't suit for every Nokia x2 device. It doesn't suit the Indian version.
Click to expand...
Click to collapse
Yes.
mirfatif said:
Good. I suggested you to use QFIL already For me, both NCS and QFIL work but I didn't try any other product code firmware except 059V782 which is my device code.
What's your product code? 059V787 or 059V782? I'm gonna add a warning to my thread about this.
There are some devices which were officially updated from 2.1.0.11 to 2.1.0.12, so they don't support 2.1.0.13 as per my understanding.
Click to expand...
Click to collapse
mirfatif said:
Yes.
Click to expand...
Click to collapse
Bro, do you know how to solve the sim 1 issue? i mean, my sim network is being recognized by the nokia x2 but, there is no signal for that.
himanagendra said:
Bro, do you know how to solve the sim 1 issue? i mean, my sim network is being recognized by the nokia x2 but, there is no signal for that.
Click to expand...
Click to collapse
Well, personally I never faced this issue. But you can try flashing @yoAeroA00 Custom Firmware. It flashes radio as well as other related partitions.
Quote:
Originally Posted by mirfatif
i cant find "C:\ProgramData\Nokia\Packages\Products\RM-1013".plz help me...
shuvo.khan97 said:
Quote:
Originally Posted by mirfatif
i cant find "C:\ProgramData\Nokia\Packages\Products\RM-1013".plz help me...
Click to expand...
Click to collapse
Create it if not found
Thx a lot, its helped me
Sent from my MI 5 using XDA-Developers Legacy app
For me please rm-1013:
2.0.0.11
059WOWO
thank you
how to connect mobile with pc in recovery mod or fast mod or normal mode i have custom rom and my sims are not working i want to stock rom again but when i select progmramming then recovery then there is no file shown in box for your information i attached img plz check and tell me the solution
lovegrw said:
how to connect mobile with pc in recovery mod or fast mod or normal mode i have custom rom and my sims are not working i want to stock rom again but when i select progmramming then recovery then there is no file shown in box for your information i attached img plz check and tell me the solution
Click to expand...
Click to collapse
Just flash stock rom zip before installing whole firmware
not able to get .xml file while flashing nokia x2
when i click on load xml in QFILL then i get new window but it shows no raw program file.
In reality it exist in extracted folder 'rm-1013 ' . When i type .xml in window it shows no file match.
please tell how to get this to proceed further.