Database Users

[Stock][PreRooted][D5503] 14.6.A.0.368 Customized CE1 (Lolipop 5.1.1)

ROM downloaded with XperiFirm and pre-rooted with PRFCreator.
CDA (customization version): 1280-7864 (Customized CE1)
It contains SuperSU 2.46 and LockedDualRecovery 2.8.21 (it will overwrite your current recovery).
You need to be on any rooted ROM already with custom recovery to flash a .zip file with this firmware!
You don't loose any data (but make your backup before upgrading), you keep root, you update your firmware to the newest Lolipop 5.1.1 build .368.
Download link: https://mega.nz/#!0B9HQIIL!gLuhWuK15KByWKrwLaL9KLkLZB-ztg8npsYmUo_Ni3o
Notes:
Do a factory reset if you've got "Android OS/System" as a number one battery eater.

Hi Davka , I will taste it right now , any wipes at all to do please ????

Cache and Dalvik cache for sure. I'm not sure about system, I did system wipe but probably by mistake I have also checked data so I have ended with factory reset state - but everything important was backed up on SD

Hey !
Worked fine for me (with both dalvik and cache wipe obsiously).
But a major problem remains : when I launch xposed, it says that the framework is not installed and I need to flash it with the zip from xda.
I get the right zip (v74 sdk22 arm) but when I flash it, it boot properly, optimise the apps, shows the launcher for about 1 second and then the screen goes and stays black....
Help ? Please ? :'(
Edit : okay, found the solution ! (uninstall xperia xposed). But now I can't get rid of the bloatware with titanium backup as I used to do ><

installing Xposed?
I do not work and tested some versions.

Xposed working fine for me. Flashed zip via recovery. No issues so far.

Anyone having the same problem with uninstalling the bloatwares ?

MarniC00 said:
Xposed working fine for me. Flashed zip via recovery. No issues so far.
Click to expand...
Click to collapse
You can pass me the link to download the zip please?
Thank you.

overdrack said:
You can pass me the link to download the zip please?
Thank you.
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=3469283&d=1441910102

Skwiizz said:
Anyone having the same problem with uninstalling the bloatwares ?
Click to expand...
Click to collapse
Me too. It looks like Titanium Backup not working.

Is it possible to install this as secondary rom using multirom

Thank you for your work!!

Everything works like a charm.

i guess its bc the stock kernel is running in enforcement mode. try to set it to permissive via init script

Installed , all running perfect , thanks !!!!!

Do a factory reset if you've got "Android OS/System" as a number one battery eater.
I've got this problem and factory reset solved it (and that 's not so trivial because I've cleared all partitions just after update)

Xposed not working!!!!!! I installed it, worked fine.... then I enabled the apps, rebooted again...and then it didn't..black screen. help!
I mean I know how to fix it (uninstall xposed..)
but how to do it without uninstalling it? Should I try enabling the apps one by one?

kornelkahh said:
Xposed not working!!!!!! I installed it, worked fine.... then I enabled the apps, rebooted again...and then it didn't..black screen. help!
I mean I know how to fix it (uninstall xposed..)
but how to do it without uninstalling it? Should I try enabling the apps one by one?
Click to expand...
Click to collapse
same at my device.
i found that the xperia Xposed (LP) plugin was the one. uninstall this app, and everything is fine again.

Could anyone post a torrent link please?

No problem with xposed so far(did a clean install) an i use serajr xposed LP for few days and everithing works like a charm. Thankas @Davka for your work! Keep it up!!!
Odoslané z D5503 pomocou Tapatalku

[D5503][Stock][PRF+FTF][Lollipop]14.6.A.0.368_CustomizedIN_Pre-Rooted with recovery

Details:
Code:
Firmware: 14.6.A.0.368_CustomizedIN (R3D)
SuperSU version: STABLE v2.46
Recovery: Z1C-lockeddualrecovery 2.8.21-RELEASE
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research or ask questions here if you have any concerns about the work done here
* before flashing it. Remember that you are choosing to make these modifications,
* and I'm not responsible for what you are doing with your device, and I don't take any
* responsibility of bricked devices or any sort of damage that may be caused by you.
*/
Instructions for flashing:
- Backup your data using recovery or as You always do. Sony Backup and restore may work if You will be backing up on Lollipop and then restoring on Lollipop again.
If You don't have root:
If You are on Lollipop
Flash any 14.4.A.0.108 FTF. You can find one here.
Root using the exploit. You can find the root exploit here.
Since You are one .108 firmware already, there it no need to flash the kernel ftf again. Simply run the install.bat in "Root kernel .157.zip>rootkitXperia_20140719.zip"
Install Locked bootloader Dual Recovery by NUT from here. Use Z1C-lockeddualrecoveryX.X.XX-RELEASE.installer.zip.
Download and copy the PRF zip to phone.
Boot into recovery
Wipe the System, Data, Cache, Dalvik cache partitions.
Flash the copied PRF zip.
Wipe Cache and Dalvik Cache
Reboot to phone!
You have got a rooted Lollipop firmware!
If You are on Kitkat:
Root using the exploit. You can find the root exploit here.
If You are on .108 firmware, simply run the install.bat in "Root kernel .157.zip>rootkitXperia_20140719.zip".
If not, then flash the .108 kernel ftf via flashtool, and then run the install.bat .
Install Locked bootloader Dual Recovery by NUT from here. Use Z1C-lockeddualrecoveryX.X.XX-RELEASE.installer.zip.
Once You have recovery:
Download and copy the PRF zip to phone.
Boot into recovery
Wipe the System, Data, Cache, Dalvik cache partitions.
Flash the copied PRF zip.
Wipe Cache and Dalvik Cache
Reboot to phone!
You have got a rooted Lollipop firmware!
If You have root:
Backup Your apps and their data. Take only user apps backups, system apps backups are not recommended.
Go to recovery, take a nandroid backup.(optional, but recommended)
Wipe system, data, cache and dalvik cache.(Wiping data can be optional, but is recommended)
Flash the PRF zip.
Restore apps and their data.
At least one reboot is recommended for phone to settle after restoring apps.
Done!
Download Links:
Flashable zip: D5503_14.6.A.0.368_Generic_India-SuperSU_V2.46-lockeddualrecovery_2.8.21-.zip
Firmware used: D5503_14.6.A.0.368_Generic_India.ftf
Credits:
@zxz0O0 for PRFCreator
@Chainfire for SuperSU
@Nut for Recovery
NOTE: If You were using xposed on 5.0.2, it is compulsory that You must uninstall it first. Else You will have bootloops when You enable Xposed on 5.1.1 You might also need to unsinstall SDK21 to install SDK22 for xposed on 5.1.1 .
If Xposed is needed, You can go here.
14.5.A.0.270 version can be found here.

Thanks..+1

Yay! Finally it's here. Please do post your experience. First, i won't clean install, just flash over my existing .242, if it doesn't behave well. Then I'd clean install.

Do I need to install both zip and ftf or only zip is good enough?

letsjam1984 said:
Do I need to install both zip and ftf or only zip is good enough?
Click to expand...
Click to collapse
FTF is the original stock ROM, the zip file includes root and a custom recovery. You need to decide whether you wish flashing the stock ROM without root (ftf) or the pre-rooted zip file.
Best, maris

Could someone please help me with this step?
My Z1c is already on the 5.1.1 / 14.6.A.0.368. It was never rooted before.
- Flash a 14.4.A.0.108 FTF
- Root using the exploit
- Install Locked bootloader Dual Recovery by NUT.
Click to expand...
Click to collapse

pathaniya said:
Yay! Finally it's here. Please do post your experience. First, i won't clean install, just flash over my existing .242, if it doesn't behave well. Then I'd clean install.
Click to expand...
Click to collapse
It seems to be working good for Me for now, and too short time to give a proper experience report since I was restoring mostly. I used a fresh install since other peoples in other threads have been facing different problems which disappeared after a clean flash. You can try a dirty flash, and if problem presists, clean flash would be good.
Space Ape said:
Could someone please help me with this step?
My Z1c is already on the 5.1.1 / 14.6.A.0.368. It was never rooted before.
Click to expand...
Click to collapse
What problem are You facing with them? I will try to elaborate the instructions more in the first post.

Mirhawk said:
What problem are You facing with them? I will try to elaborate the instructions more in the first post.
Click to expand...
Click to collapse
Thanks, mate.
I'm downloading all the files now.
I can follow the instructions, I just need a little help with the terminology, this being my first Android and root.
- Flash a 14.4.A.0.108 FTF from here. - This means downgrade phone's firmware using Flashtool, right?
- Root using the exploit. You can find the root exploit here. - Here I only use rootkitXperia and not the Kernels?
- - Install Locked bootloader Dual Recovery by NUT from here. Use the installer one. - Only execute the .bat file?
I think I can follow the rest.

I have managed to do it.
Thanks again for everything.

Space Ape said:
Thanks, mate.
I'm downloading all the files now.
I can follow the instructions, I just need a little help with the terminology, this being my first Android and root.
- Flash a 14.4.A.0.108 FTF from here. - This means downgrade phone's firmware using Flashtool, right?
- Root using the exploit. You can find the root exploit here. - Here I only use rootkitXperia and not the Kernels?
- - Install Locked bootloader Dual Recovery by NUT from here. Use the installer one. - Only execute the .bat file?
I think I can follow the rest.
Click to expand...
Click to collapse
Space Ape said:
I have managed to do it.
Thanks again for everything.
Click to expand...
Click to collapse
Glad it got solved. Just if someone again stumbles against such problems, I will clarify Your doubts:
Yes, phone's firmware needs to be downgraded for rooting the phone. This is done as there is a proper rooting option available only for that specific firmware's kernel. There are other rooting methods available, but they are not safe and even they require downgrading to older firmware.
Yes, since the firmware flashed is of version .108 , there is no need to flash the kernel. Just use the rooting method.
Yes, the .bat one, since the phone is rooted and it has no recovery.

Low light camera improved, screen shot improved, sound improved, but they took background defocus feature away. Initial readings of 5.1 firmware.
Can't install adway. Anyone else facing this issue?
Wifi is still unstable since day 1, anyone else?
Sent from my D5503 using XDA Free mobile app

pathaniya said:
Low light camera improved, screen shot improved, sound improved, but they took background defocus feature away. Initial readings of 5.1 firmware.
Can't install adway. Anyone else facing this issue?
Wifi is still unstable since day 1, anyone else?
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
Camera seems to be same to Me, but I never actually used camera in other than Superior Auto mode. I had the background defocus camera after installation.
Never used adway, so can't comment. May be issues with support to v5.1?
WiFi is pretty much stable to Me. Works even on weak signal. What exactly do You mean by unstable? Not working or connectng and disconnecting frequently?
There seems to be an issue with smart lock, the position one. Use to work fine with 5.0.2, now locks phone even when I'm in trusted area. Have done a clean flash.

Mirhawk said:
Camera seems to be same to Me, but I never actually used camera in other than Superior Auto mode. I had the background defocus camera after installation.
Never used adway, so can't comment. May be issues with support to v5.1?
WiFi is pretty much stable to Me. Works even on weak signal. What exactly do You mean by unstable? Not working or connectng and disconnecting frequently?
There seems to be an issue with smart lock, the position one. Use to work fine with 5.0.2, now locks phone even when I'm in trusted area. Have done a clean flash.
Click to expand...
Click to collapse
What do you use for blocking ads, then? You could be right about adaway 's 5.1 support, but I've installed Mother of all Ad Blocks, zip file which is available on Xda. I've rarely used superior auto, manually most, focusing speed has also increased. I installed background defocus from the play store, dailer is jittery, wifi just drops frequently, unless am within 6feet rangeof the router. I'll try smartlock too. Mine's is a clean install as well, always gives positive results.

pathaniya said:
What do you use for blocking ads, then? You could be right about adaway 's 5.1 support, but I've installed Mother of all Ad Blocks, zip file which is available on Xda. I've rarely used superior auto, manually most, focusing speed has also increased. I installed background defocus from the play store, dailer is jittery, wifi just drops frequently, unless am within 6feet rangeof the router. I'll try smartlock too. Mine's is a clean install as well, always gives positive results.
Click to expand...
Click to collapse
Well,I don't block adds.
Oh, will try using Manual focus!
Dialer is also fine for Me. Maybe a restore problem?
Yeah, clean flash is always good.

Guys, i have installed viper audio successfully. Download SELinux mode changer, set it to Permissive Mode - launch viper - install audio driver, reboot - launch viper - select Super Audio Quality, Enjoy. F-droid app has SeLinux mode changer if you are having difficulty in find it.
Sent from my D5503 using XDA Free mobile app

pathaniya said:
Guys, i have installed viper audio successfully. Download SELinux mode changer, set it to Permissive Mode - launch viper - install audio driver, reboot - launch viper - select Super Audio Quality, Enjoy. F-droid app has SeLinux mode changer if you are having difficulty in find it.
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
Does Viper audio make much difference? Also, does it interfere with Sony Audio settings such as ClearAudio etc?

Mirhawk said:
Does Viper audio make much difference? Also, does it interfere with Sony Audio settings such as ClearAudio etc?
Click to expand...
Click to collapse
a lot of difference, trust me on this. The Sony Audio Settings are all off and totally untouched rather you can mix them in with
Viper if there need be but i won't recommend. since Viper is complete in itself, IMHO.
best of luck

Just installed with a clean flash. Xposed is working fine. However i'm having a problem with charging my phone with the magnetic cable to 100%. it is stuck on 85%. Is this a lollipop bug? On kitkat 4.4.4 I did not have that problem.

Hello to all,
Yesterday I spent all night trying to pass described rooting procedure, but no luck
I'm on stock LP 5.1.1 (14.6.A.0.368) no root, no unlocked bootloader.
Every time I flashed D5503_14.4.A.0.108_EURO.ftf my phone got boot loop, so I couldn't go further.
Finally to make the phone usable I came back to LP 5.1.1 using Sony PC Companion repair option.
Could someone tell me what I did wrong or why I got no success?

DonKroko said:
Hello to all,
Yesterday I spent all night trying to pass described rooting procedure, but no luck
I'm on stock LP 5.1.1 (14.6.A.0.368) no root, no unlocked bootloader.
Every time I flashed D5503_14.4.A.0.108_EURO.ftf my phone got boot loop, so I couldn't go further.
Finally to make the phone usable I came back to LP 5.1.1 using Sony PC Companion repair option.
Could someone tell me what I did wrong or why I got no success?
Click to expand...
Click to collapse
Which version of flashtool are You using? I would recommend using the latest flashtool version. Because another user was able to flash the ftf with no problems. Else Your ftf might be corrupted.

I want xposed framework on my a3 sm-a300h

I've been working on getting xposed framework to work for two months now. All I want is to install xposed framework on my sm-a300h. Can it really be that hard that it should take up all my waking time during two months to install it?????
My system has been deodexed by someone else, so don't ask me how he managed to make that work.
Tried to install TWRP by following instructions here!: http://forum.xda-developers.com/sam...overy-twrp-2-8-7-0-samsung-galaxy-a3-t3173382
Managed to get TWRP to work!
I had already installed XposedInstaller_3.0-alpha4.apk
With TWRP I tried to install this (Xposed framework):
xposed-v84-sdk21-arm.zip from http://dl-xda.xposed.info/framework/sdk21/arm/xposed-v84-sdk21-arm.zip
When I restarted I suppose I got a so called boot loop, I just see the Samsung logo over and over.
So my two questions are,
1. Why didn't it work to install Xposed Framework?
2. How do I get out of the boot loop and get the phone to work again? haven't made any backups.
Has anyone installed xposed framework on this model or should I sell the piece of s*t phone and try with some other phone???? I'm wasting my life trying to get this to work....
My head's just spinning trying to find information in different threads in here, I'm think I'm on the limit to having a nervous breakdown. As far as I can see there's no thread on how to install xposed framework on sm-a300h? Please, help. If I need to buy a new phone, just tell me what phone to buy, and how much it is and ill buy that phone instead...

I guess I have to flash a stock rom in order to get my phone working again?
I downloaded a stock rom from sammobile for my device, A300HXXU1BPA1_A300HUUBBPA1_BVO.zip but the only way I can flash a rom now is through odin, but odin doesn't take .zip files. So how can I restore my phone and flash the zip?
I tried the Wipe function in TWRP, but it doesn't work... Still boot loops.

I guess the mistake I did was flashing the wrong version of xposed framework for my device?
Which version should I use the next time i try?
Does this work for my device? http://forum.xda-developers.com/showpost.php?p=64900847&postcount=3681

helphelphelphelp said:
I guess the mistake I did was flashing the wrong version of xposed framework for my device?
Which version should I use the next time i try?
Does this work for my device? http://forum.xda-developers.com/showpost.php?p=64900847&postcount=3681
Click to expand...
Click to collapse
Instead of second guessing then getting frustrated and annoyed when it doesn't work. Why not just spend literally 2 mins and make a proper backup first then if there are any issues just restore it?
Whats the point in having a custom recovery and not using it's main feature?
You've only got yourself to blame for your errors and resultant frustration and anyone else reading this should also take note.
Anyway pet talk over.
You should be good with the link you posted.

ashyx said:
Instead of second guessing then getting frustrated and annoyed when it doesn't work. Why not just spend literally 2 mins and make a proper backup first then if there are any issues just restore it?
Whats the point in having a custom recovery and not using it's main feature?
You've only got yourself to blame for your errors and resultant frustration and anyone else reading this should also take note.
Anyway pet talk over.
You should be good with the link you posted.
Click to expand...
Click to collapse
Did everything again from the beginning, flashed a ROM from sammobile, flashed TWRP.
Installed XposedInstaller_3.0-alpha4.apk
Then I tried to install this version of xposed framework: http://www.arter97.com/browse/tmp/hsk/xposed/ using TWRP.
Then I got an error while installing xposed framework. The error message says i need to free up more /system space. arter97 recommends in his thread that you "debloat your current ROM installation via root access.", but how do I do that?
And when I tried to start the phone after trying to install xposed framework it went into a boot loop.
So then I tried to restore the backup in TWRP. Restore Failed.
Get this error: Cannot restore system -- mounted read only.
What now?

helphelphelphelp said:
Did everything again from the beginning, flashed a ROM from sammobile, flashed TWRP.
Installed XposedInstaller_3.0-alpha4.apk
Then I tried to install this version of xposed framework: http://www.arter97.com/browse/tmp/hsk/xposed/ using TWRP.
Then I got an error while installing xposed framework. The error message says i need to free up more /system space. arter97 recommends in his thread that you "debloat your current ROM installation via root access.", but how do I do that?
And when I tried to start the phone after trying to install xposed framework it went into a boot loop.
So then I tried to restore the backup in TWRP. Restore Failed.
Get this error: Cannot restore system -- mounted read only.
What now?
Click to expand...
Click to collapse
To restore your backup remove the check in 'SYSTEM partition read only' under MOUNT.
Make sure your rom is deodexed.
Install this via twrp: http://forum.xda-developers.com/attachment.php?attachmentid=3510616&d=1445173483
Install Xposed installer.
Done

if you bothered reading the xposed thread, you would've noticed that Samsung TouchWiz firmwares are not supported from the official xposed from rovo.
use this one from arter97/dkcldark. Keep in mind, this is for sdk21 (5.0), in case we ever get 5.1 (sdk22) or 6.0 (sk23), we wont need this one anymore.

with the dkcldark version you don't even need to debloat anymore;
I also made a tutorial some time ago; should be the same steps for this a3:
http://forum.xda-developers.com/samsung-a-series/general/tuto-xposed-odex-rom-yes-knox-0x0-t3316688/
anyway, you should read a lot first before even thinking about flashing something, and like said above, a backup is a must because even those who (think they) know what they are doing sometimes **** up

I`m using this without any issues.
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
SDK22.
SDK22 means Android Lollipop 5.1.x.
SDK23 means Android Marshmallow 6.0.x.
ARM means the devices that are running arm32 operating system.
ARM64 means the devices that are running arm64 operating system.
Try this (at your own risk).
It`s better to flash or restore backup first and then install Xposed Installer App (as normal apk installation) and then flash this from TWRP.

Sony.Z2.D6503.PreRooted.Customized.AU.1281-9715.23.5.A.1.291 (Root+Recovery)(LB/UB)

Info :
Greetings and Welcome. Here's the latest firmware update for Sony Z2(D6503) Build23.5.A.1.291_R4D with (Recovery + Root)
Enjoy!
How To Flash :
Method 1 Clean Flash :
1. Download Prerooted Rom + Bootloop Fix and place them on ur device storage,
2. Reboot to Recovery,
3. Do A Full Wipe Except the storage partition where u put Prerooted Rom + Bootloop Fix,
4. Flash Prerooted Rom and then Bootloop Fix
5. Reboot.
Method 2 Dirty Flash Over Previous Build Of Android MM :
1. Download Prerooted Rom + Bootloop Fix and place them on ur device storage,
2. Reboot to Recovery,
3. Flash Prerooted Rom and then Bootloop Fix,
4. Wipe Cache And Dalvik/Art
5. Reboot.
6. After Finishing booting process wait a few mins,
7. Now go to app drawer and check if supersu is there or not, If not then simply download it from google play store and install it and open it and select SU Binary install normal & Click Reboot,
8. Enjoy!
Stuff Used to Create This Pre-rooted Room :
D6503_Customized AU_1281-9715_23.5.A.1.291_R4D
PRFCreator_v1.3
UPDATE-SuperSU-v2.76-SYSTEMMODE
RecRootV4_combined
My Dell Laptop,
A Keyboard + Mouse,
My Experiences With This Build Of Android MM :
Now We can transfer apps to "EXTSDCARD" using "Transfer data to SD card"
STAMINA mode is back
Multi Tasking Is better than Previous Build Of Course XD
Significantly faster & smoother than previous build (23.5.A.0.575)
Screen Recording Error still exist
Anything Else? :good:
Download Links :
Rom : Click On ME
Bootloop Fix : Click On ME
Screenshots :
http://imgur.com/a/i7icA
Instead of Typing Thanks, You can simply press on it :good:, Try not to spam this thread, If u have any Question regarding my upload Ask here.

First Comment
Keep Up Bro (Y)

Thank you. ?

Thanks!

I'll try to build the same file but for Customized FR (my country) !

Why bootloop fix from 570 build need to flashed too ?
Sent from my D6503 using Tapatalk

itsnie said:
Why bootloop fix from 570 build need to flashed too ?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Because that's a life saver for Z2 with Prerooted rom. That's the only bootloop fix exist here on xda for now. Can you try flashing without it at see if it boots? And report back here! Unless u wanna waste some times on re-flashing LP rom and rooting it again to get back on a rooted mm rom

Will previous D6502 patches work?

RICdefeat & byeselinux
Have you used byeselinux & RICdefeat in the firm compilation??
Or only the bootloopfix?
Thank you

supercfc said:
Will previous D6502 patches work?
Click to expand...
Click to collapse
Can't say since I don't have a D6502 Model. Try and let me know if it works

LunaFree said:
Have you used byeselinux & RICdefeat in the firm compilation??
Or only the bootloopfix?
Thank you
Click to expand...
Click to collapse
"RecRootV4_combined" Include all of those stuff as well as recovery

@op
Will dummy_flashable.zip works as well making the ZIP? im on .575 with root and recovery. i have already downloaded the ftf before seeing this post

Thank you so much!!!!

So I finally made the same thing for the french firmware !
https://www.wetransfer.com/downloads/9d69b9f8a30da16970abc3f5655fa01720160804144653/d99f41

Dilesh Perera said:
@op
Will dummy_flashable.zip works as well making the ZIP? im on .575 with root and recovery. i have already downloaded the ftf before seeing this post
Click to expand...
Click to collapse
As I already said "RecRootV4_combined" Includes Root + Recovery. So u don't need anything else. Except Bootloop Fix

rakeshbro said:
"RecRootV4_combined" Include all of those stuff as well as recovery
Click to expand...
Click to collapse
I've do my compilation with 23.5.A.1.291 firmware using the ITALIAN customized and SUPERSU with PRF creator.
I've install busybox from appstore and DUAL recovery with the install.bat from pc and then in RECOVERY MODE i´ve flashed byeselinux+RICdefeat without bootloopfix, and works too!!
Thank you Rakeshbro!! :good::good:

LunaFree said:
I've do my compilation with 23.5.A.1.291 firmware using the ITALIAN customized and SUPERSU with PRF creator.
I've install busybox from appstore and DUAL recovery with the install.bat from pc and then in RECOVERY MODE i´ve flashed byeselinux+RICdefeat without bootloopfix, and works too!!
Thank you Rakeshbro!! :good::good:
Click to expand...
Click to collapse
Yeah I saw some feedback on "23.5.A.0.575" build as well that some ppl didn't flashed bootloop fix and they got it boot.
But for me I'd to flash bootloop fix to get into os. I remember Last time when I was on MM build "23.5.A.0.570_R4D" I've like 350+ apps installed on my z2 and after a few weeks later Build "23.5.A.0.575" came out. And guess what I've flashed it without the bootloops fix and that's it, I got stucked on lockscreen and whenever I unlock my device it just reboot again & again, And I can't even boot to recovery. With a broken heart I've to flash LP rom again and root it and then flash the latest MM build. I just did't want to take that risk again this time, since I've now more than 360+ apps installed on my Z2. So It's upto All of u guys. U want to flash the old bootloop fix or not. Try and let us know Good Luck!

Yeah you need bootloop fix. The same thing happened to me but I just pressed volume button during the bootloop, I entered TWRP, connected to USB, copied bootloop fix and flashed it without reinstalling everything

rakeshbro said:
Yeah I saw some feedback on "23.5.A.0.575" build as well that some ppl didn't flashed bootloop fix and they got it boot.
But for me I'd to flash bootloop fix to get into os. I remember Last time when I was on MM build "23.5.A.0.570_R4D" I've like 350+ apps installed on my z2 and after a few weeks later Build "23.5.A.0.575" came out. And guess what I've flashed it without the bootloops fix and that's it, I got stucked on lockscreen and whenever I unlock my device it just reboot again & again, And I can't even boot to recovery. With a broken heart I've to flash LP rom again and root it and then flash the latest MM build. I just did't want to take that risk again this time, since I've now more than 360+ apps installed on my Z2. So It's upto All of u guys. U want to flash the old bootloop fix or not. Try and let us know Good Luck!
Click to expand...
Click to collapse
I think we have do the same, but i dont use the bootloop fix...
I will flash recroot v4 next time without bootloop fix and i tell you. Thank you!!

Thanks for your work
flashing without a probleme

Snapchat login fail

Hello all. So i own a galaxy s5 g900f and was using snapchat normally then i had to logout and now im tryin to login again but show up a message saying: "oh no! Your login temporarily failed, please try again later ". I already tried to clean the app data even sync my google acc. But no use . I have a rooted device. Anyone can help me please ? Thank you

Have you installed xposed? If so uninstall xposed login on snapchat and reinstall xposed... Problem should be solved!
And if you didn't install xposed make a backup and do a factory reset...
If none of the above helped install a custom rom if you want but that's all i know

RadsGam3R said:
Have you installed xposed? If so uninstall xposed login on snapchat and reinstall xposed... Problem should be solved!
And if you didn't install xposed make a backup and do a factory reset...
If none of the above helped install a custom rom if you want but that's all i know
Click to expand...
Click to collapse
I tried to install xposed but my phone got stuck on the samsung logo . You know any way to install xposed ?

So you don't have xposed installed... And you can't login on snapchat. I'd recommend to install a custom rom and first install snapchat and see if you can login but just be sure a cyanogenmod based rom is really good but you will lose touchwiz functions. Or you could just try a factory reset.

@luizinho123 did you use the uninstall framework flash zip? When your S5 got stuck at the samsung logo?
Also if you wanted to install xposed I would also agree with @RadsGam3R to install cyanogenmod or use samsung kies to reflash your device. Then install snapchat and login once you done that then you can do the following if you want xposed installed.
1. Download the correct xposed framework zip file here >
sdk23 for marshmallow
sdk22 for lollipop
sdk21 for kitkat
2. download the xposed installer here >
3. Reboot your device into your custom recovery and flash xposedframework
4. Reboot your device it may do another reboot in the process
5. once you're back in install the xposed installer and just download the xposed modules that you would like, then go to the the module section and tick the checkbox and reboot.
6. Sit back and enjoy xposed!
If you have any bootloops please read the known issues section on this post here >

HatchetEgg said:
@luizinho123 did you use the uninstall framework flash zip? When your S5 got stuck at the samsung logo?
Also if you wanted to install xposed I would also agree with @RadsGam3R to install cyanogenmod or use samsung kies to reflash your device. Then install snapchat and login then you will need to do the following
1. Download the correct xposed framework zip file here >
sdk23 for marshmallow
sdk22 for lollipop
sdk21 for kitkat
2. download the xposed installer here >
3. Reboot your device into your custom recovery and flash xposedframework
4. Reboot your device it may do another reboot in the process
5. once you're back in install the xposed installer and just download the xposed modules that you would like, then go to the the module section and tick the checkbox and reboot.
6. Sit back and enjoy xposed!
If you have any bootloops please read the known issues section on this post here >
Click to expand...
Click to collapse
Yes i have android 6.0 on my samsung . I tried to install xposed , but i got stuck on the samsung logo then i used the zip file to unistall . This snapchat thing just happened recently . I dont know . About the xposed did all steps that i saw on a thread here but still got stuck on samsung logo more than 15/20 min. Do you have any suggestions ? Thanks

RadsGam3R said:
So you don't have xposed installed... And you can't login on snapchat. I'd recommend to install a custom rom and first install snapchat and see if you can login but just be sure a cyanogenmod based rom is really good but you will lose touchwiz functions. Or you could just try a factory reset.
Click to expand...
Click to collapse
I installed the ressurection remix rom but couldnt record a video . And i want to install others roms but ive noticed that asks for aroma installer . I ve no idea wht that may be .

@luizinho123
you could try looking for these files to see if they exist if they do delete them. They are XposedBridge.jar and xposed.prop
you find "xposed.prop" in "system" and "XposedBridge.jar" in "system/framework"
once done reboot and try login in again.
Aroma installers are flashable zips but they give you the ability to customize the install, a bit like the typical windows installers where you can change the location of where the program is installed. You can run these in the custom recovery environment.

HatchetEgg said:
@luizinho123
you could try looking for these files to see if they exist if they do delete them. They are XposedBridge.jar and xposed.prop
you find "xposed.prop" in "system" and "XposedBridge.jar" in "system/framework"
once done reboot and try login in again.
Aroma installers are flashable zips but they give you the ability to customize the install, a bit like the typical windows installers where you can change the location of where the program is installed. You can run these in the custom recovery environment.
Click to expand...
Click to collapse
But i saw somewhere that xposed wasnt working with samsung stock roms . I think that s the reason why get stuck on samsung logo

You could be unfortunate that's the case for you because it was mentioned in this post here.
If you really want xposed you can try a custom rom then take the steps to flash xposed framework. This is what I have been doing for 15 months.
If you want the most stable custom rom I suggest using cyanogenmod 13, practically I have been using this for some time and rarely got any crashes.
You will need tho gapps along side because they're not included within the rom, I use Opengapps but you can choose a vaerity of gapps wether if you want all of them or ust the minamul just to have the playstore. There is an aroma installer which worked in the past for me, but no longer does for me for some strange reason. where you can choose which gapps you like installed. But I would recommend not using the armor installer as it can cause instability with the rom.
You will need to flash the gapps and rom together and you will only need to do that once providing your staying with that custom rom.

HatchetEgg said:
You could be unfortunate that's the case for you because it was mentioned in this post here.
If you really want xposed you can try a custom rom then take the steps to flash xposed framework. This is what I have been doing for 15 months.
If you want the most stable custom rom I suggest using cyanogenmod 13, practically I have been using this for some time and rarely got any crashes.
You will need tho gapps along side because they're not included within the rom, I use Opengapps but you can choose a vaerity of gapps wether if you want all of them or ust the minamul just to have the playstore. There is an aroma installer which worked in the past for me, but no longer does for me for some strange reason. where you can choose which gapps you like installed. But I would recommend not using the armor installer as it can cause instability with the rom.
You will need to flash the gapps and rom together and you will only need to do that once providing your staying with that custom rom.
Click to expand...
Click to collapse
Thanks man . I already have the small gapps on my sd card . I only need to know how to install and use aroma installer . Btw could you recommend any roms name to flash ?

luizinho123 said:
Thanks man . I already have the small gapps on my sd card . I only need to know how to install and use aroma installer . Btw could you recommend any roms name to flash ?
Click to expand...
Click to collapse
No problem
I wouldn't worry too much about aroma installers as I rarely had to use one myself. Aroma installers are part of a flashable zip file, which you would flash like an normal zip flle in your custom recovery, this video gives a good example of what you can do with one, Here >
I would recommend this rom since I found this more stable than Resurrection remix/ bliss pop/ AICP and liquid smooth, At least in my experience anyway.
However I have been testing this rom for a few day and seem pretty stable and much quicker than any other rom I tested so far!
Also in order to flash the files to install a new rom on your device you will need a custom recovery, I recommend installing this app for the latest custom recovery for the g900f

HatchetEgg said:
You could be unfortunate that's the case for you because it was mentioned in this post here.
If you really want xposed you can try a custom rom then take the steps to flash xposed framework. This is what I have been doing for 15 months.
If you want the most stable custom rom I suggest using cyanogenmod 13, practically I have been using this for some time and rarely got any crashes.
You will need tho gapps along side because they're not included within the rom, I use Opengapps but you can choose a vaerity of gapps wether if you want all of them or ust the minamul just to have the playstore. There is an aroma installer which worked in the past for me, but no longer does for me for some strange reason. where you can choose which gapps you like installed. But I would recommend not using the armor installer as it can cause instability with the rom.
You will need to flash the gapps and rom together and you will only need to do that once providing your staying with that custom rom.
Click to expand...
Click to collapse
Thanks . i installed the ROM you recommended . and i loged on snapchat without any problems . but now i cant record a video . it gives me an error . any solution for that ?

luizinho123 said:
Thanks . i installed the ROM you recommended . and i loged on snapchat without any problems . but now i cant record a video . it gives me an error . any solution for that ?
Click to expand...
Click to collapse
Did the error say "camera has stop responding" or something along those lines?

HatchetEgg said:
Did the error say "camera has stop responding" or something along those lines?
Click to expand...
Click to collapse
Yes . it says . video recording failed .
I got the same error when I had the ressurection remix ROM installed

Before flashing the ROM did you do the following?
1. Wipe data
2. Wipe cache
3. Wipe dalvik and art cache
4. Flash custom rom
5. Flash gapps
6. reboot into system.
In this order?

HatchetEgg said:
Before flashing the ROM did you do the following?
1. Wipe data
2. Wipe cache
3. Wipe dalvik and art cache
4. Flash custom rom
5. Flash gapps
6. reboot into system.
In this order?
Click to expand...
Click to collapse
Yes . I do that every time I flash a ROM . don't know what to do smh

luizinho123 said:
Yes . I do that every time I flash a ROM . don't know what to do smh
Click to expand...
Click to collapse
You could try wiping the system as well when flashing the new custom rom.

HatchetEgg said:
You could try wiping the system as well when flashing the new custom rom.
Click to expand...
Click to collapse
I know . I select all except micro SD and the other after .

can you remember when you last updated your phone whilst it was on stock?