Can someone help me please? During phone calls and its only on lollipop my screen goes black and it won't turn on until the call ends but its only in the sunlight, at night time or in a dark room it doesn't happen anymore. My screen is cracked and some pieces of glass are missing on the top around my ear piece are missing so I'm assuming its a proximity sensor issue. I don't have this issue on TW roms since I can turn on the screen with the home button, but can't on lollipop roms. I really don't want to have to go back to TW but this is a major issue with me, is there anything I can do to mess with the proximity settings or anything? Obviously get m screen fixed but moneys a little tight on my side so yeah. Any help would be appreciated
Related
im running full stock everything for starters.
When i am in a call sometimes up to my ear or speakerphone the screen will go black and i wave my hand in front of the light sensor and nothing works. The screen stays black. I like having the lock button hang the phone up so i want to keep that option on...
Just wondering why it is doing this, thx.
Its a thing to save battery usage,
do you have a case on it?
from my experimentation, the sensor is somewhere at the top, left of the power button when the phone is facing you.
prehaps your hand, hair, or case is covering it causing it to turn off - as it should
it thinks your in a call and you dont need to look at the screen.
So my sister who also has an Aria dropper her phone and now there is a huge crack on the screen. She doesn't have insurance so she is trying to find an alternative way to fix it.
Simply replacing the screen would work, but another problem started happening when she cracked the screen. During a phone call, the screen will turn off, as it should, but when the call has ended, the screen stays off and the only way to turn it back on is to either pull out the battery and reboot the phone or to plug it into a charger.
Does anyone know how to solve this problem? Will replacing the screen fix the blackout issue? Or is this phone just trashed forever?
sounds like it destroyed the phone and the proximity sensor. i'm not sure if replacing the screen will fix this.
I actually had the exact same problem after dropping my phone during a call. I noticed that I didn't have to pull the battery to end the call if I held it up super-close to a really bright light (desk lamp, etc).
There were many times when I was on the street (in nyc), and had to find a bright light to hold it up to.
I dropped my Aria right on the corner with the ambient light sensor (in the upper right corner), which shattered the glass right in front of it.
Amazingly enough, after a few weeks, it started to get better and better - and now, nearly 4 months later (yea, i just deal with **** lol), it will hang up cals properly.
I'm actually working on replacing the screen right now, btw
I am currently running:
3.4.0 franco kernel
JOP40D - 4.2.1
And I have a really annoying bug on my nexus4 which I dont know if its just a fault on my phone or if its a setting that I have not configured.
Basically when I call someone the screen automatically switches off and there is no functionality, even when I press the power button the screen doesnt become active, which means I cant push keypad numbers when I am calling a number which has menu options, I cant hang up unless the other person does it first, and I cant put my phone on loudspeaker.
As soon as the call ends the screen becomes active again, Im sure that it has something to do with the camera sensor on the front of the phone because i know most of them detect when you are putting it up to your ear so then it turns off the touchscreen so that you dont acidentally touch the buttons with your face, with mine it just doesnt let you do anything at all when im in a call.
Would much appreciate any advice/help. Thanks in advance :good:
I believe you're referring to the proximity sensor. Do you have a screen protector with no cutout for the sensor or, perhaps, an incredibly oily face?
Agree with estallings15, I modified my screen protector and all has been well.
ahhhhhh right i have never thought to look into that, i assumed that the proximity sensor was just the camera which has a cutout on my screen protector but ive just realised that there is a small sensor on the left of the phone which I now assume is the proximity sensor.
OK i have just took my screen protector off and it works fine now! thanks for pointing that out
Maybe u guys could also help me with the other question that I posted on the q&a section lol :good:
much appreciated
Hi,
Lately i have been noticing that the proximity sensor on calls on my s5 is not working properly. Once i answer/make a call, when i place the phone in my ear it shuts down the screen but the problem is when i take it away from my ear, the screen doesn't turn back on.
I tried the the testing menus (*#0*# or something like that) and when i placed my finger close to the sensor it detected, going green and vibrating but it doesn't go away from that state.
The only thing that changed was that i applied a glass screen protector a few days ago and im thinking it could be that, but its strange because its only when i back away from the screen that it doesn't register, so i don't know if that or not. Also, the protector is properly aligned and the edges are not on top of the sensor.
Anyone experienced this on their s5?
griffin_1 said:
Hi,
Lately i have been noticing that the proximity sensor on calls on my s5 is not working properly. Once i answer/make a call, when i place the phone in my ear it shuts down the screen but the problem is when i take it away from my ear, the screen doesn't turn back on.
I tried the the testing menus (*#0*# or something like that) and when i placed my finger close to the sensor it detected, going green and vibrating but it doesn't go away from that state.
The only thing that changed was that i applied a glass screen protector a few days ago and im thinking it could be that, but its strange because its only when i back away from the screen that it doesn't register, so i don't know if that or not. Also, the protector is properly aligned and the edges are not on top of the sensor.
Anyone experienced this on their s5?
Click to expand...
Click to collapse
You have to change the proximity sensor or cancel it(cutting the flat)
I ended up removing the screen protector and it went back to working properly =/ I can't really put it back on now because it attracted specks of dust and it doesn't glue well now =/
Cutting it flat means it deactivate it? Because i find it useful for phone calls
griffin_1 said:
I ended up removing the screen protector and it went back to working properly =/ I can't really put it back on now because it attracted specks of dust and it doesn't glue well now =/
Cutting it flat means it deactivate it? Because i find it useful for phone calls
Click to expand...
Click to collapse
Cutting it means deactivate fully, even in calls display stay on.
So I broke the screen. replaced it and it worked fine. However i noticed the adhesive wasnt holding it tight enough. so after a few days I pulled the glass up as munch as I could and used some superglue on the top and then clamped down to hold in place. Now no more light is coming through but.. When I make a call as soon as a i press dial the screen turns back regardless of my distance to prox sensor. I'm assuming I got glue on it or broke it.
Eventually I will replace LCD but in the meantime is there any way to simply have the screen stay on during callsly ap?
I tried a few apps which did nothing. I looked for settings but nothing jumped out at me. I swear I have done this before on either an iphone or a much older android device.
Any suggestions would be great appreciated. Right now by using switches under accessibility im able to hang up at last but I cant turn on speaker and not sure how to set that up. So if there isnt a way to keep the display on any suggestions on how to set up so I can hang up and turn on speaker phone in the most effiecient way?
Its gotta be built in the system to keep the display on during calls but maybe not.
Again thanks!
mdrbase said:
So I broke the screen. replaced it and it worked fine. However i noticed the adhesive wasnt holding it tight enough. so after a few days I pulled the glass up as munch as I could and used some superglue on the top and then clamped down to hold in place. Now no more light is coming through but.. When I make a call as soon as a i press dial the screen turns back regardless of my distance to prox sensor. I'm assuming I got glue on it or broke it.
Eventually I will replace LCD but in the meantime is there any way to simply have the screen stay on during callsly ap?
I tried a few apps which did nothing. I looked for settings but nothing jumped out at me. I swear I have done this before on either an iphone or a much older android device.
Any suggestions would be great appreciated. Right now by using switches under accessibility im able to hang up at last but I cant turn on speaker and not sure how to set that up. So if there isnt a way to keep the display on any suggestions on how to set up so I can hang up and turn on speaker phone in the most effiecient way?
Its gotta be built in the system to keep the display on during calls but maybe not.
Again thanks!
Click to expand...
Click to collapse
There used to be an Xposed module to disable the proximity sensor on some SoC... But it is VERY SoC dependent from what I understand... And it may not be supported anymore...
Your other alternative would be to disable the proximity sensor in the kernel... I know it CAN be done... But I have no idea how