Related
As suggested, I have decided to make my own thread for the Cyanogenmod nightlies and other ROMs. It will make things a lot easier in the long run.
Disclaimer: as with the other Roms, Use at your own risk! Since the CM7 nightlies are basically an ongoing beta, you run the risk to brick your Gtab if you are not careful. Use to learn NxFlash first before attempting to flash ROMS. Also, do yourself a favor and get Titanium Backup! Always backup yours apps/settings and wipe data/cache/dalvik before flashing.
These will be using the bootloader's 1.2 Pershoot's kernel (2.6.32.43 / 1.4 ghz Kernel) for GB. This ROM works with the Gtab and should work with the ZPAD altough I have no confirmation of this yet.
Thanks goes out to: Team Douche/Cyanogenmod Devs for making a great ROM, Zyhong for showing me how to update to 1.2 and a few more tricks, Maxdamage for taking the time to compile the nightlies for 1.1 users, Pershoot for making such a great kernel and Roebeet for being the one that inspired me to take my journey down the Android rom lane.
Issues:
1) Once you set up DSPmanager, it force crashes.
1) Vanilla CM7 nightly (only vold.fstab was modified):
Latest build: Build 07262011 (Changelog)
2) Modified version of the ROM: CM7Tab build 07272011
Changes in modified version
1) replaced DSPmanager.apk with a previous version that is known to work (7.0.3) (if you open it, it FCs)
2) vold.fstab is setup as sdcard for internal storage & emmc for external card
3) using pershoot's 2.6.32.43 GB kernel for 1.2 bootloader (For more info, check his blog.
4) Read_ahead_kd increased from 128 to 2048.
5) Set up overclocking by default and battery saver script + cpu governors via userinit.sh (from Zyhong's ROM, based on Caulkin's scripts).
6) Replaced Camera libs & apk to stop the 8-bit pixelling.
7) Changed values for lowmemorykiller (07102011).
8- Increased dalvik.vm.heapsize to 64m (07102011)
9) Set some values to improve video playback (07272011)
RC1 version of the rom with changes: 7.1.0 RC1 with Pershoot 42 kernel
(Sorry if this is short but I will improve the thread as it goes)
To-do list:
1) remove some apks (such as Rom manager) & create a removed apks folder.
2) change the EMMC to Sdcard2
If you have suggestions/ideas, do not hesitate to share them.
reserved for future use
AS WE ARE REORGANIZING THE GTABLET FORUM - ALL ROMS/KERNELS/ETC WILL HAVE THEIR Q&A POSTS MOVED TO THE Q&A SECTION.
THE Q&A LOCATION FOR THIS ROM IS HERE
Thanks.
NeatKernel
FOR KITKAT AND JELLY BEAN AOSP ROMS
First of all, thanks to @neobuddy89 I had learned many things from him.
thank him and me if u think its worth.
This is enhancement over basic CM kernel to attain more fluidity, performance and power saving.
Kernel is compiled with Christopher83 Linaro GCC 4.9.1-2014.07 Toolchains and is bug free.
If any bug found other than one already in CM11 basic kernel, please report.
OCed but default max frequency is 1GHz.
Downloads
captivate
Kernel Source:
https://github.com/mohammad92/NeatKernel_captivate
Thanks to
neobuddy89 for source
pawitp
kasper_h
stratosk
Christopher83
gokhan moral
dorimanx
alberto96
SferaDev
didhiy
me
Change Log
v1.11 changlog:
+ Fix boot issue with cm10, 10.1 and 10.2!
+ Fix kernel version not avilable!
v1.10 changlog:
+ No swapSD version you can switch sd by modify /system/.neatkernel/swapsd and set from 0 to 1.
Or by this aroma flashable zip NeatKernel_SwapSD_Switcher
+ Update cwm to v6.0.5.0 .
+ Update to twrp 2.7.1.0 .
+ Compiled with Christopher83 Linaro GCC 4.9.1-2014.07 Toolchains.
+ Add BigMemlibs to ne installed at boot.
+ init.d soppurt.
+ modules installed at boot.
For more details check Github
Old Change Log
v1.09 changlog:
+ Add Intelliactive gov.
+ Add SIOPLUS I/O sched.
+ Add FIFO I/O sched.
+ Add ZEN I/O sched.
+ Update cwm to v6.0.4.9 .
+ Update to twrp 3.7.0.0 .
+ Compiled with Christopher83 Linaro GCC 4.9.1-2014.05 Toolchains.
+ Update cm11 ramdisk to latest.
v1.08:
+ Compiled with Christopher83 Linaro GCC 4.9.1-2014.04 Toolchains.
v1.07:
+ Compiled with CMA.
+ Update cwm to v6.0.4.8
v1.06:
+ update cm11 ramdisk (any cm11 before 3/3/2014 may have force closes).
+ enable fast charge ny default.
+ add super cyan boot logo.
+ add more Governors.
v1.05:
+ "one kernel to rule them all" thanks to Gokhan moral, Dorimanx, Alberto.
+ Now kernel support cm10, cm 10.1, cm10.2 and cm11.
+ Fast charge mod (not tested) thanks stratosk.
+ Swap SD included in kernel for cm10 and cm10.1.
+ Revert all cma commits.
+ Upstream changes.
v1.04:
+ Dual recovery twrp and cwm (cwm is default recovery, volume keys after vibrate boot into twrp.) thanx @CTCaer for the idea and scripts.
+ cma patchs v1 an v2 merged see github.
+ Ram now is 417MB. thanx @qwertyujhgfdsa
v1.03:
+ more cma updates.
+ move app to sd fixed.
v1.02:
+ Kernel with cma test added [408 MB].
+ Add new bootsplash.
+ Flashing rom error fixed.
+ Upstream changes.
for more details check Github and for cma
v1.01:
+ Kernel with swaped sdcard added (switched sdcard0 and sdcard1).
+ Upstream changes.
v1.0:
+ Linaro Toolchain 4.7-2012. 8 compiled
+ Entropy Depletion Fixes and Enhancement
+ WiFi wakelocks reduced
+ OC Support upto 1.4 GHz
+ Minor network tweaks
+ Reduction in memory reservation for logging
+ Memory leak fixes
+ Performance tweaks
SwapSD
as of NeatKernel v1.10 and above we will use this trick to switch between storage.
the easy way is to flash this aroma flashable zip and follow the steps.
the hard way is to modify /system/.neatkernel/swapsd from "swapsd=0" to "swapsd=1"
delete /system/.neatkernel/swapsd will go back to stock storage status.
Dual recovery (twrp and cwm)
cwm is default recovery.
how to boot in twrp?
Just hit any volume keys after vibrate to boot into twrp recovery.
Will you release a kitkat rom also? Anw, thank you for your hard work to bring kitkat to us
awesome!!!!!!!!
yet another kernel to play with...
:good::good:
HoangTuBot said:
Will you release a kitkat rom also? Anw, thank you for your hard work to bring kitkat to us
Click to expand...
Click to collapse
No
I will focus on kernel , use cm11 from 9000 thread with my kernel
Will this work with OmniRom?
EDIT: Nevermind. Had a brain fart. Just read it in the OmniRom thread.
Hello, tried to flash it in top of CyanAOSP 1.1.0 and gives error about different partition layout and if try to flash again it gonna delete data. Thats normal? I have the rom already set and running good to set again. Normally flashin kernels never have to set everything again.
Thanks!
carlosgardel said:
Hello, tried to flash it in top of CyanAOSP 1.1.0 and gives error about different partition layout and if try to flash again it gonna delete data. Thats normal? I have the rom already set and running good to set again. Normally flashin kernels never have to set everything again.
Thanks!
Click to expand...
Click to collapse
1. Make a nandroid backup of CyanAOSP 1.1.0
2. Flash neatkernel
3. restore nandroid backup of CyanAOSP 1.1.0
4. Flash neatkernel
5. Reboot device
Do these steps one after the other, staying in recovery from point 1 to point 5.
I will try NeatKernel and i think i will use it for next roms i will post, if it works so good as i imagine.
Dang beet me to the kernel. Nice to see I'm not the only one compileing for 4.4 on here though
Monfro said:
1. Make a nandroid backup of CyanAOSP 1.1.0
2. Flash neatkernel
3. restore nandroid backup of CyanAOSP 1.1.0
4. Flash neatkernel
5. Reboot device
Do these steps one after the other, staying in recovery from point 1 to point 5.
I will try NeatKernel and i think i will use it for next roms i will post, if it works so good as i imagine.
Click to expand...
Click to collapse
Thanks It worked!!!
carlosgardel said:
Thanks It worked!!!
Click to expand...
Click to collapse
I just flashed from CyanAOSP v1.1.0 and had no trouble whatsoever. Went smooth as silk. Strange that you did....
viiron said:
I just flashed from CyanAOSP v1.1.0 and had no trouble whatsoever. Went smooth as silk. Strange that you did....
Click to expand...
Click to collapse
It depends on the partition scheme you were before: on 4.3 there were 2 partition scheme used, one with a bigger system, like NeatKernel.
If you already had the bigger system partition, is not needed for the kernel to repartition again.
If you have the system partition small, it will repartition.
home button doesn't work, how to fix?
Swap Internal With External
Love the Kernel. Been using it since yesterday and haven't had a single issue. I was wondering however if you could compile a kernel (fork) that switches sdcard0 and sdcard1 in fstab.aries.
At least until a more suitable solution is found.
Thanks in advance.
That's great! Do we have any configuration tool?
mjkute said:
home button doesn't work, how to fix?
Click to expand...
Click to collapse
Use compatible rom or replace the home button layout in system/user folder here is the link
viiron said:
Love the Kernel. Been using it since yesterday and haven't had a single issue. I was wondering however if you could compile a kernel (fork) that switches sdcard0 and sdcard1 in fstab.aries.
At least until a more suitable solution is found.
Thanks in advance.
Click to expand...
Click to collapse
I will look at this soon, Iam busy with exams, look at system/etc/voldfstab u can switch
dongfangri said:
That's great! Do we have any configuration tool?
Click to expand...
Click to collapse
No specific tool yet see Google play there is many
No more vold.fstab or build.prop tweaks Android KitKat 4.4
mohammad.afaneh said:
Use compatible rom or replace the home button layout in system/user folder
I will look at this soon, Iam busy with exams, look at system/etc/voldfstab u can switch
No specific tool yet see Google play there is many
Click to expand...
Click to collapse
Umm...they did away with vold.fstab since 4.2.2. Then build.prop tweaks for 4.3 no longer work either, hence my request
NeatKernel_v1.01-[12-04] uploaded.
change log:
Kernel with swaped sdcard added (switched sdcard0 and sdcard1).
Upstream changes.
Android KitKat Internal to External Storage Swap...
mohammad.afaneh said:
NeatKernel_v1.01-[12-04] uploaded.
change log:
Kernel with swaped sdcard added (switched sdcard0 and sdcard1).
Upstream changes.
Click to expand...
Click to collapse
Thanks man I really appreciate the effort. You have no idea how many people this will help and probably bring over to this rom in general due to the single kernel mod. Hell I was trying to find a way to Macky 4.4 ROM just for the fact that they took the time to make an extra kernel for those of use with broken internal sdcards.
Thanks again, and keep up the good work!
ULTRA Kernel installer is an AIO kernel tool that uses AROMA installer (what's that?).
This tool is capable to backup, install ULTRA kernel, and restore a kernel backup.
Make a Nandroid backup before using it, to stay safe.
ULTRA kernel features
+ OC support
+ Lot of governors and schedulers added:
-- New governors --
Hotplug
ZZmove
OndemandQ
LulzactiveQ
Smartassv2
InteractiveQ
-- New schedulers --
BFQ
ROW
ZEN
VR
+ PhilZ Recovery (what's that?). Thanks Phil3759!
DOWNLOAD
Android File Host
Dev-Host
Thanks @iiD4x for the idea and logo. And @AndyMcMars!, he spent lot of time on this too.
XDA:DevDB Information
ULTRA Kernel Installer, Kernel for the Samsung Galaxy S Advance I9070
Contributors
t4n017, cocafe, Phil3759, TeamCanjica, TeamNova, AndyMcMars, iiD4x
Kernel Special Features:
Version Information
Status: Beta
Created 2014-03-18
Last Updated 2014-05-28
Changelog
CHANGELOG
20140401 (v4.01)
- Deleted all previous kernels varieties
- Added an all-in-one kernel (called ULTRA)
- Now the installer is compatible with CM-11 users too (choose the right option when prompted)
- UKSM is back (KSM --> UKSM) [testing]
- UKSM now disabled by default
- Added UKSM toggle in Galaxy S Advance settings (advance tab)
- PhilZ recovery updated (v6.25.4)
---x---x---x---
20140328 (v3.28)
- KSM is back (UKSM --> KSM)
- Fixed Aroma FM copy process
- PhilZ recovery updated (v6.24.6)
---x---x---x---
20140325 (v3.25)
- Kernel sources update (lot of performance improvements!)
- PhilZ recovery updated (v6.23.3)
- Script a bit more clean
---x---x---x---
20140323 (v3.23)
- Fixed modules install/restore process. (NOW REALLY!)
---x---x---x---
20140320
- Fixed modules restore process.
---x---x---x---
20140319C
- Now the script will also backup modules files (thanks @darcik for the suggestion).
---x---x---x---
20140319B
- All kernels were rebuilt from scratch
- No more Wi-Fi bug!
- Added Smartassv2, InteractiveQ and Interactive to PLUS (and therefore PLUS+OC) kernel.
---x---x---x---
20140319A
- Temporary deleted PLUS and PLUS+OC due to Wi-Fi bug.
---x---x---x---
20140318
- Initial build
---x---x---x---
Reserved
Very good, I waiting PhilZ Kernel a long time xD
Thank you!
Well, after lot of test I think the Wi-Fi bug is only happening on PLUS and, therefore, PLUS+OC kernel.
It's weird because I didn't touch anything related to Wi-Fi.
I apologize to those who installed them, and further to those who tried the alternative installation method without result.
I'll built them again from scratch and report back.
"I told you..." :victory:
Is the OC kernel stable? Is it possible to under volt?
fbs said:
"I told you..." :victory:
Click to expand...
Click to collapse
Yes, but lot of user reported PLUS was working fine. Maybe they thought they were installing PLUS but instead, they were restoring the default kernel backup.
marlock87 said:
Is the OC kernel stable? Is it possible to under volt?
Click to expand...
Click to collapse
Not all the Advances can handle the same freq, you should try if you can OC without reboots.
It should be, but I didn't tested UV. If you do, please report
Philz Kernel working fine in RR 5.0.5
i flashed philz kernel on cm11 05/03 build(dalvik runtime).it installed fine but after restarting i always get process.android,phone has stopped.even factory reset including wipe dalvik cache wouldnt resolve the issue.flashing the beanstalk rom since i wanted to try it out anyway.the recovery work fine though including power off(the feature which is actually why i installed it in first place).anyways thanks bringing the kernel for our device and hoping to see more development:good:
wingryder said:
i flashed philz kernel on cm11 05/03 build(dalvik runtime).it installed fine but after restarting i always get process.android,phone has stopped.even factory reset including wipe dalvik cache wouldnt resolve the issue.flashing the beanstalk rom since i wanted to try it out anyway.the recovery work fine though including power off(the feature which is actually why i installed it in first place).anyways thanks bringing the kernel for our device and hoping to see more development:good:
Click to expand...
Click to collapse
for now , PhilZ wont work on CM ..
I get the "process.android,phone has stopped" error after installing (wipe cache, wipe, dalvik, install zip), and I used the DEFAULT kernel. Why?
I use Carbon KitKat rom,
So happy to see this topic, thanks for posting!
GREAT NEWS!
I've built all the kernels from scratch, now Wi-Fi bug is fixed! Please test and report.
Check changelog for more changes.
Are these kernels supposed to work with the i9070-P version??? Just to be sure...
elementbt said:
Are these kernels supposed to work with the i9070-P version??? Just to be sure...
Click to expand...
Click to collapse
Yes ofc, when you flash a ROM (like RR) you're using the DEFAULT kernel posted here.
Just installed DEFAULT KERNEL and I get the "process.android,phone has stopped" error.
Nothing helped.
CM 11 by Macław.
darcik said:
Just installed DEFAULT KERNEL and I get the "process.android,phone has stopped" error.
Nothing helped.
CM 11 by Macław.
Click to expand...
Click to collapse
It seems that the kernels aren't working fine on CM 11. I don't know why, but I'll ask TeamCanjica for help.
Tnx for fast answer.
Btw, your script is making backup of kernel and coping new modules to system/modules folder,
but if is needed restore old kernel, modules files are new and is problem because they are not working with old kernel
Good, that I did myself copy of these files.
darcik said:
Tnx for fast answer.
Btw, your script is making backup of kernel and coping new modules to system/modules folder,
but if is needed restore old kernel, modules files are new and is problem because they are not working with old kernel
Good, that I did myself copy of these files.
Click to expand...
Click to collapse
Thanks for report bro!, I forgot the modules backup. Anyway you can use DEFAULT kernel to restore them.
But I'll edit the script to backup those files and I'll re-upload them.
Really thank you!
QMobile Noir A9
Fully Working Android Ver. 4.2.2
for QMobile Noir A9, Fly IQ Trend, Myphone A888, Wiko Cink Peax and Intex Aqua Wonder
Good news for those who still have A9 and other mentioned phones in the heading that a much better JB 4.2.2 is available online for download.
This ROM is finalized by a few faces from Forum.Frandroid.com for Wiko Cink Peax (French version) and is not my work at all except that I had to tweak it so that everything works smoothly as in JB 4.1. I had to patch it because when I installed the ROM, it was very laggy and did not allow me to work without frustration. Moreover, I am using A9 hence, build.prop was to be arranged for such requirements too.
You will be installing this ROM at your own risk. I and the developers making it possible will not be held responsible if anything goes wrong. By the way, it is so simple to follow the process so don't worry.
Don't try it on other devices than mentioned above.
Special Thanks to;
1. Qus1, Pratikmore and Kimo06
2. My|Phone for releasing JB 4.2.2 for Amoi N820
3. Google for such a great OS
5. noobpremium for Universal MTK performance package
6. Ryuinferno for Universal init.d Support and other developers whose work is inside this ROM
How to install:
1. Do a full backup of your current ROM before proceeding (this is a precautionary move in case you don’t like the ROM, you can switch back)
2. I will recommend using TWRP Recovery in order to get a full backup including boot, data, system and android secure
3. Now reboot the mobile and manually delete all the hidden folders starting with dot (.) both from internal memory and external memory
4. Rename the folder “Android” to “Android.b” in order to get back your data files of games after installation
5. Restart in TWRP and wipe dalvic cache, cache, data, android secure and system
6. Now install jb2v2-8.zip
7. Later install A9Patch.zip. Other mobile users should not install the zip.
8. Wipe Cache and Dalvic Cache and restart the phone which will take a few minutes to ready the new ROM
9. Fill the information required for starting up the phone
10. Press Menu and start Universal init.d app, allow it root permission and then press Activate , later press Verify to check if init.d is supported.
12. Open Terminal Emulator in ROM Toolbox app and write "su". Give the root permission. Now the icon in emulator will change from "$" to "#". Now write "mtkod" and press enter. Processing will be done and later phone will restart itself.
11. Now all the work is done. You are ready to enjoy the Awesomeness of Jelly Bean 4.2.2
Pros:
1. Lots of Free RAM
2. New Snap Camera app with its Gallery (Stock Gallery is removed due to lack of customization and for auto-focus bug in Video capture)
3. Can fully utilize the Xposed Installer, GravityBox and other exposed apps for theming and animating etc.
4. Tethering, Hotspot, Bluetooth, WIFI and GPS working :good:
5. Better performance and color reproduction due to optimizations in build.prop and MTK performance package
6. Init.d is supported and few scripts are given in the added zips
BUGS:
1. Pinkish Camera result when capturing in low light
2. Slight lag during installing and uninstalling apps. Usage of battery doctor is essential for task killing and battery optimization
3. Others you tell me
DOWNLOAD LINK of the ROM
DOWNLOAD A9Patch.zip
Download Universal MTK performance package by noobpremium
P.S. Don’t PM me if there is any query. Just post your question on this page.
XDA:DevDB Information
AOSP JB 4.2.2 for Noir A9 and WCP, ROM for all devices (see above for details)
Contributors
alirazaagha, Qus1, Pratikmore, Kimo06, Willteck and others
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: JB 2 v2.8
Stable Release Date: 2014-06-24
Current Beta Version: JB 4.2 Beta 1
Beta Release Date: 2013-09-18
Created 2014-09-08
Last Updated 2014-09-15
Boost the Speed
Open ROM toolbox lite then CPU control and choose "ondemandx" as Governor and "sio" as I/O scheduler and check mark "Apply on boot". Now, enjoy a massive boost in performance :highfive:
Warning1
Not working for Wiko Cink Peax 2 (french model)..
It loops on bootanimation (WIKO.....).
Thank.
Bouziane_Dr said:
Not working for Wiko Cink Peax 2 (french model)..
It loops on bootanimation (WIKO.....).
Thank.
Click to expand...
Click to collapse
Sorry bro, your phone is not same as Wiko cink peax (1) and is not compatible with this ROM. You must check out frandroid.com for your phone. There are plenty of ROMs available for your phone.
update the link please.
For all F460 variants recovery can be downloaded from here https://drive.google.com/file/d/0B4A...ew?usp=sharing this is for who having Lollipop v20c not kitkat.
The above recovery is a permanent recovery which is CWM(Clock Work Mod) recovery.
If you want touch enabled TWRP recovery flash this zip from the CWM recovery https://drive.google.com/file/d/0BwN...ew?usp=sharing
Our stock firmware locked with 389 GPU speed to unlock to 600mhz max GPU speed. Flash the below thermal mod which i modified it will boost up the CPU AND GPU Performance as well as Battery. This thermal mod makes the CPU and GPU locked at stable frequencies.
https://drive.google.com/file/d/0BwN...ew?usp=sharing
If you want further tweaks download L speed v2.2 from the below link and flash this zip file from recovery
https://drive.google.com/folder/d/0B...F0WVdsOHc/edit
But to make this work first you need to enable the init.d support, terminal emulator, root explorer and busybox.
Refer this link how to enable init.d support for rooted devices http://forum.xda-developers.com/show....php?t=1710980
After you enabled init.d
Flash the L speed v2.2 zip file from recovery and
Open Terminal emulator app and type (case sensitive)
su
boost
If you want to go LSpeed wizard type
su
LS
Where you can find alot of options unser LS Wizard to tune your android device. Like cpu tuner, Ram management, Seeder, Cleaner, Buil.prop tweaks. CPU governor tweaks, Zip align, VM tweaks, Net tweaks, Io tweaks, SD tweaks, Kernel tweaks etc., Our LG G3 supports all of them(Lucky atleast here)
If you want to increase the performance to MAXIMUM further you can download any Kernel control app like Device control, Trickster mod Kernel tweak from playstore and put the cpu governor in CONSERVATIVE mode and Read head buffer size 1024kb. That's it.
Credits to Robshr, JZ shimer, Lam Haong, Paget96
Update: Found that mobile performs smooth and less heat when setting up the CPU frequency min 300 and max 1574 and CPU governor in conservative mode.
Putting Batter Saver ON will reduce the heat produced by the screen.
Hit thanks if i helped you. All the best :good:
all of your links are dead bro
vinodh3 said:
For all F460 variants
Click to expand...
Click to collapse
Good day @vinodh3
The links in your OP do not work. If you would like to replace them, please send me a PM so the thread can be re-opened.
Thank you