Database Users

YET another Possible GPS issue fix for CM6..Tested!

Hey guys, so I am just like some of you who are the victims of the GPS issue when flashing CM6 nightly. At some point for me GPS failed to lock me in quickly, and it's somewhat broken, because it usually took about 2-3 minutes to lock under clear sky, and about 4-5 minutes inside of my apartment. Before the issue, it locks like instantly. Anyway, did some research and ran into a post that really helped me cleared up the issue and here's how you do it.
Things you need:
1. A rooted stock Froyo 2.2 ROM, yes there's no way around it because you will need to dial some "##" code, and CM6 dialer doesn't support some of it as I know of.
2. Your MSL code. The quickest way is to get this app from market (thanks JFree for sharing).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/QUOTE]
OK ready?
Code:
1. Nandroid backup your current CM6 (will need to restore later)
2. Boot to recovery
3. Wipe data, cache, Dalvik
4. Flash the rooted stock rom
5. do a wipe data, cache, dalvik one more time to be sure after flash.
6. Let it boot up and the next step is VERY important
7. Launch phone dialer and dial ##GPSCLRX#
8. It will ask you for your MSL, feed it.
9. Upon hitting OK, your phone will just say reboot in 10 secs, let it reboot.
10. Once rebooted, launch maps and your GPS should lock almost instantly.
11. If it worked, then boot into recovery.
12. Wipe data,cache,dalvik
13. Restore your previous CM6
14. Now try to launch maps again and you should expect same result as in step 10.
15. If NOT, then reboot and do a wipe.
NOTE: the way I understand GPSCLRX is that it somehow clear some settings internally within the radio and/or via your account provisioning with Sprint. I think the long lock time is caused by something got stuck in the process.
NOTE: For me after step #13, it worked right away, even inside of my apartment, without me having to do a wipe.
Try it out and please post your results.
Source/reference: http://community.sprint.com/baw/thread/37566 --> although it was meant for Hero but it worked for Evo apparently.
EDIT: I did several reboot after the fix and same result of instant lock. I will continue to test for several days to see if this is a permanent fix or not.

I fixed mine on accident doing everything EXCEPT the dialing GPS thing.
I just flashed to sense, my GPS locked on, flashed back to CM6 and I was good (wiping data and cache TWICE between every rom flash). If you don't have your MSL you can try what I did first and maybe save some trouble.

This worked for me. Amazing. Thank you, sir.

ViViDboarder said:
I fixed mine on accident doing everything EXCEPT the dialing GPS thing.
I just flashed to sense, my GPS locked on, flashed back to CM6 and I was good (wiping data and cache TWICE between every rom flash). If you don't have your MSL you can try what I did first and maybe save some trouble.
Click to expand...
Click to collapse
Yep I tried this approach mentioned in the other thread but no go. That prompted me to go and look for another solution.

vboyz103 said:
Hey guys, so I am just like some of you who are the victims of the GPS issue when flashing CM6 nightly. At some point for me GPS failed to lock me in quickly, and it's somewhat broken, because it usually took about 2-3 minutes to lock under clear sky, and about 4-5 minutes inside of my apartment. Before the issue, it locks like instantly. Anyway, did some research and ran into a post that really helped me cleared up the issue and here's how you do it.
Things you need:
1. A rooted stock Froyo 2.2 ROM, yes there's no way around it because you will need to dial some "##" code, and CM6 dialer doesn't support some of it as I know of.
2. Your MSL code. The quickest way is to call/chat with Sprint and it only took me 3 minutes of chat to get it.
OK ready?
Code:
1. Nandroid backup your current CM6 (will need to restore later)
2. Boot to recovery
3. Wipe data, cache, Dalvik
4. Flash the rooted stock rom
5. do a wipe data, cache, dalvik one more time to be sure after flash.
6. Let it boot up and the next step is VERY important
7. Launch phone dialer and dial ##GPSCLRX#
8. It will ask you for your MSL, feed it.
9. Upon hitting OK, your phone will just say reboot in 10 secs, let it reboot.
10. Once rebooted, launch maps and your GPS should lock almost instantly.
11. If it worked, then boot into recovery.
12. Wipe data,cache,dalvik
13. Restore your previous CM6
14. Now try to launch maps again and you should expect same result as in step 10.
15. If NOT, then reboot and do a wipe.
NOTE: the way I understand GPSCLRX is that it somehow clear some settings internally within the radio and/or via your account provisioning with Sprint. I think the long lock time is caused by something got stuck in the process.
NOTE: For me after step #13, it worked right away, even inside of my apartment, without me having to do a wipe.
Try it out and please post your results.
Source/reference: http://community.sprint.com/baw/thread/37566 --> although it was meant for Hero but it worked for Evo apparently.
EDIT: I did several reboot after the fix and same result of instant lock. I will continue to test for several days to see if this is a permanent fix or not.
Click to expand...
Click to collapse
Use this to get your MSL code its on the market:

Jfree3000 said:
Use this to get your MSL code its on the market:
Click to expand...
Click to collapse
lol wow that was super easy...thanks for sharing.

We need the option to dial ##---# its so usuful and yet its left out.

vboyz103 said:
lol wow that was super easy...thanks for sharing.
Click to expand...
Click to collapse
Not a problem, just spreading the knowledge. This app was made by a forum member btw.

worked for me

Worked for me, dear lord thank you. I wonder if one of the nightly builds corrupted this?

Thanks OP. It worked just like you posted.

Yep took my phone on a road trip to Vegas this labor weekend and GPS is locking instantly even when I was in MGM grand hotel room. I used the google nav the entire time while driving and having it plugged to charger, there was no hickups whatsoever. This Evo is rocking solid.

The ##GPSCLRX# command worked perfectly for me as well. I didn't bother with all the extra wipes (other than one before the new ROM flash). I'm convinced that all these WIPE EVERYTHING TWICE THEN WIPE IT AGAIN steps in a lot of guides are basically rain dancing.

worked like a charm..thanks!

I was hopeful after getting linked to this thread, but my GPS still locks extremely slow after following all the steps, I didn't get a quick lock on #10, rebooting and wiping again didn't help either.
Just posting to balance out the raucous "It works!" statements.

Temragon said:
I was hopeful after getting linked to this thread, but my GPS still locks extremely slow after following all the steps, I didn't get a quick lock on #10, rebooting and wiping again didn't help either.
Just posting to balance out the raucous "It works!" statements.
Click to expand...
Click to collapse
Did you try other methods other than this? If yes and still doesn't work then your phone might have an issue.

vboyz103 said:
Did you try other methods other than this? If yes and still doesn't work then your phone might have an issue.
Click to expand...
Click to collapse
No, I haven't, actually. Other than flashing stock -> Sprint Nav. (Which doesn't lock any faster)
Since topics sink so fast, would you mind pointing me in a direction to look? Thanks much.

can some1 link me to stock 2.2, i would really appreciate it.

i2ichal2d said:
can some1 link me to stock 2.2, i would really appreciate it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=743352 is the one I found, though my experience doesn't exactly lend it credit

this tutorial worked as advertised. thank you!

How to install Custom ROM CM 12.1 Lollipop 5.1.1 with Phillz Recovery and Root i9192

Hi, everyone I have recently did Custom ROM CM 12.1 Lollipop 5.1.1 on my Samsung Galaxy S4 Mini I9192. So for complete steps how to do it, Follow the Steps -
Strictly for I9192 Devices
Be noticed that it will void your warranty and your device may get brick during process. Also keep your battery fully charged before doing anything. I am just showing you things to do, in any odd situation YOU ARE RESPONSIBLE for damage.
For all the steps below use genuine USB cable comes with your device.
Start By Installing Phillz Recovery on your device. Here it is how
Download philz_touch_6.48.4-serranodsub_AndroidTunado.tar and Odin
When your phone is full charged, turn it off.
Enter Download Mode by pressing HOME + VOLUME DOWN + POWER KEY.
When download screen will appear open Odin and connect your phone to computer with USB Cable.
You will see your device detected as "COM:*". In Odin, do not change any checkbox settings and click PDA or AP (whatever available) and choose Phillz recovery "philz_touch_6.48.4-serranodsub_AndroidTunado.tar" file.
After choosing file, click Start Button to begin downloading in phone.
Your phone will reboot automatically and Phillz Recovery willl be succesfully installed.
So we are done with custom recovery. Next step is to install CM 12.1 . Again charge your battery if you lose any during Phillz Recovery. For download CM 12.1 and Gapps follow this post - http://forum.xda-developers.com/galaxy-s4-mini/development/rom-cyanogenmod-12-0-s4-mini-duos-gt-t2950526 (Big thanks to @k2wl).
After downloading, paste both .zip files to SDCARD. I recommend to paste both in internal and external memory in case.
Before installing ROM must do a backup of your device, install Nandroid or Titanium Backup from Google Play and get a full backup of your system and data. You need almost 4GB of space in external SDCARD to do so. Don't miss the backup as it will be only way to get you back on working phone if any failure occur. (Copy on computer as well to get secured)
So we are ready to install CM 12.1 yay! (Unlpug USB Cable if connected)
Boot your device into Recovery Mode by pressing HOME + VOLUME UP + LOCK BUTTON
From there wipe the system and clear cache: “wipe data factory reset”, “wipe cache partition” and “wipe dalvick cache”.
From main menu of recovery select “install zip from SD card” and “choose zip from SD card”.
Pick the cm-12.1-20XXXXXX-UNOFFICIAL-serranodsdd.zip file from SDCARD and install it.
When completed, DON'T EXIT/REBOOT, press again install zip from SD Card and choose gapps zip and install it.
When done Reboot your device.
There it come cynogenmod icon on bootup of your OS. Congrats CM 12.1 is installed. You can go to setttings and see version 5.1.1 of android working!
Don't forget to follow changelog of ROM for new nightly infos: http://www.cmxlog.com/12.1/serrano3gxx/#next_build
So follow rest if you want SuperUser in your device. Please note if you don't want superuser and yet Root access you have inbuilt in ROM at Settings >Developer Options > Root. Only follow below if you want SuperUser Application to have control over root access.
Download SuperSU-v2.46.zip file (from attachments) and put in your SD Card.
Again bootup in recovery mode HOME + VOLUME UP + LOCK
Choose "Install Zip from SD Card" and choose SuperSU-v2.46.zip
Install the package
When done reboot the device and you have SuperUser installed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enjoy CM 12.1 with phillz recovery and ROOTED. Keep in mind its just a tutorial. I take no responsibility of ROM or softwares attached. For your info, everything went perfect for me on my I9192. Let me know how your experience went!
Special Thanks to
@k2wl
and everyone who contributed in zip files.

hi, thanks for the post.
even for me, everything went perfect with the installation.
any further updates with your user experience, so far? hows the battery backup ?

ROM Performance as CM12.1 Nightly 3 July
ROM is almost stable and you may not have any trouble with general usage. Calling, Messaging, Wifi, Bluetooth, Radio almost everything is working. Camera quality is same as on stock and with same upto Full HD Recording. UI is more faster (thanks to no bloatware) and new settings for many new lollipop features and developer options. Battery life is same as stock (Falls to 20% after 3h 52min Screen Uptime with moderate usage with games and music playback). I haven't find any difference in battery yet using for 10 days. What I find is needed to improve or buggy are following
Random Force Closes - Few Apps (not all) get closed automatically. I often use a music player (debug version as I am developing it) which automatically closes after some time. (Maybe force close only for debug or non play-store apps, not sure, let me know about your experience) (Seems solved in newer update)
Games are not as fast as Stock Samsung - Heavy games like Asphalt 8 loses frames which is not with stock ROM. Sometimes Clash of Clans too behave a little laggy (once in hundred times).
Earpiece Speaker - I don't know if their is problem in my network provider or phone but 1 in 10 calls I can't hear anything what other person is speaking while connecting headphones give response and normal sound of caller. Tell me if it's same with you or I got problem at connection ?!?!?! Really annoying. (Most probably working 100% in new update as told by @roshanu)
Issues are being detected by @k2wl and improvement is going on everyday. You can upgrade to newer ROM when any comes out.
This post may get outdated anytime when ROM will be improved. To know what are changes in new nightlies, follow ROM Download Link > Changelog
Tell me what are new issues or if any old issues get resolved. Thanks everyone
Thanks to @roshanu for reminding of this post.

I am on July 10 version, installed using CWM recovery. Been two days now. Pretty basic use: no gaming no music.
ROM is stable so far, no force closes.
+1 on the light sensor.
Haven't had any problem with the earpiece speaker.
It seems root access was getting disabled on reboot, not sure. Also there was no SU app after the installation.
So I enabled the root for apps and adb through developer options, then installed the SU app through Play. Working fine now.
Will update new findings, if any...
Do you know if 4G LTE can be enabled on our phone i9192, or even future possibility ??

roshanu said:
I am on July 10 version, installed using CWM recovery. Been two days now. Pretty basic use: no gaming no music.
ROM is stable so far, no force closes.
+1 on the light sensor.
Haven't had any problem with the earpiece speaker.
It seems root access was getting disabled on reboot, not sure. Also there was no SU app after the installation.
So I enabled the root for apps and adb through developer options, then installed the SU app through Play. Working fine now.
Will update new findings, if any...
Do you know if 4G LTE can be enabled on our phone i9192, or even future possibility ??
Click to expand...
Click to collapse
It's good that developers are working on ROM and issues are solved pretty fast. For SU app you have to flash the SU zip file (in attachments) in download mode (by pressing [Volume Down] + [Home] + [Lock]). And sadly 4G LTE depends on chipset and hardware, not on software, so it can never be more than HSPA+ in any update. Do post any issues or any new improvement, it may help developers

Lag and Performance issues.

Hello, I have an old NOTE 4, ive had it since release date but ive started to get issues, its only happened in the past month, ill explain every single thing that is happening below.
1. When switching from apps sometimes it will take so long to open the app and during this time i literally cannot do anything, cannot open the app drawer to force close apps, cannot slide from the top to see the notification bar, after a 30seconds it will lock the phone screen (The time i have the timeout on i suppose) and then i cannot even open the lock screen nothing literally works, maybe after a minute or two it will finally let me. Sometimes a battery pull is needed.
2. When typing it will lag and do the same thing above with the freezing, and even during these processes once the screen goes black (sometimes i can still see the notification bar) the phone will completely restart itself on its own.
3. Just other general slow downs.
Here are the steps I have done to try and solve it (still no luck)
1. Wipe Cache and Dalvik Cache through TWRP.
2. Uninstalled apps and cleared out files
3. Installed an antivirus software and run tests.
4. Formatted SD Card (Removed it as well)
5. Completely formatted the whole phone (Every single bit of data (selected all options in TWRP except SD Card) so it says no OS has been installed.
6. Installed the latest stock firmware through samsung kies.
All of the issues are still happening, whether i root it or not, it will do the same. Im out of ideas and have no idea what to do. Its becoming so annoying having to constantly pull out the battery and what not.

Hmm I don't know what to say as you have already done a complete wipe! But I don't understand how you flashed the firmware through Kies though! Doesn't than need an already working phone with a ROM already installed? Don't know, have not used it for long time.
Just try to flash the stock firmware via Odin once, see if that makes any difference, after a complete wipe of course. And please don't use any anti virus, that's not needed at all.

Buy a new phone! ?

macmobile said:
Buy a new phone! ?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Which Apps are installed on your phone? In which Apps is this Problem happening? You said: "Switching between two Apps"

ithehappy said:
Hmm I don't know what to say as you have already done a complete wipe! But I don't understand how you flashed the firmware through Kies though! Doesn't than need an already working phone with a ROM already installed? Don't know, have not used it for long time.
Just try to flash the stock firmware via Odin once, see if that makes any difference, after a complete wipe of course. And please don't use any anti virus, that's not needed at all.
Click to expand...
Click to collapse
you click tools and do a firmware installation and upgrade, but I'm I'm out of ideas
macmobile said:
Buy a new phone!
Click to expand...
Click to collapse
Yep its seeming like its going that way

Install cm 12.1 or 13. I have the same problems with touchwiz firmware and roms.

Akuma360 said:
Install cm 12.1 or 13. I have the same problems with touchwiz firmware and roms.
Click to expand...
Click to collapse
Well it never used to do this so I can't see it being touchwiz, I just think the phone is nackered

Sounds like something is seriously off with your phone and that it needs to be repaired.

MichaelK18 said:
Hello, I have an old NOTE 4, ive had it since release date but ive started to get issues, its only happened in the past month, ill explain every single thing that is happening below.
1. When switching from apps sometimes it will take so long to open the app and during this time i literally cannot do anything, cannot open the app drawer to force close apps, cannot slide from the top to see the notification bar, after a 30seconds it will lock the phone screen (The time i have the timeout on i suppose) and then i cannot even open the lock screen nothing literally works, maybe after a minute or two it will finally let me. Sometimes a battery pull is needed.
2. When typing it will lag and do the same thing above with the freezing, and even during these processes once the screen goes black (sometimes i can still see the notification bar) the phone will completely restart itself on its own.
3. Just other general slow downs.
Here are the steps I have done to try and solve it (still no luck)
1. Wipe Cache and Dalvik Cache through TWRP.
2. Uninstalled apps and cleared out files
3. Installed an antivirus software and run tests.
4. Formatted SD Card (Removed it as well)
5. Completely formatted the whole phone (Every single bit of data (selected all options in TWRP except SD Card) so it says no OS has been installed.
6. Installed the latest stock firmware through samsung kies.
All of the issues are still happening, whether i root it or not, it will do the same. Im out of ideas and have no idea what to do. Its becoming so annoying having to constantly pull out the battery and what not.
Click to expand...
Click to collapse
Did your baseband somehow change. That will cause super serious lag issues and it will not get any better until you reflash modem. Also maybe try a different kernel

jlbuck6212 said:
Did your baseband somehow change. That will cause super serious lag issues and it will not get any better until you reflash modem. Also maybe try a different kernel
Click to expand...
Click to collapse
How do I find out? And how Can I try a different kernel, I'm not too into the scene to have much knowledge

OOS 3.0.2 Home button and fingerprint scanner is not working

My phone was working great after updated to OOS 3.0.2 yesterday.
But today my home button and fingerprint scanner is not working.
At 1st it was showing the " Fingerprint hardware not available" error message, but after restarting the phone, even my home button is not working.
The option to add/delete fingerprint in the "Security & Fingerprint" setting is gone.
And the test for fingerprint and home button using *#808# failed.
The test for fingerprint shows a message " The application cannot reach the android service for the sensor".
Ways I had tried so far :
1. Wipe cache (failed)
2. Wipe data and cache (failed)
3. Wipe data and cache + Reflashing the OOS 3.0.2 (failed)
Any suggestion on how to fix it? Thankyou. :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Try this -- > http://forum.xda-developers.com/oneplus-2/general/guide-oneplus-2-home-button-dead-t3324321

B!Gguy said:
Try this -- > http://forum.xda-developers.com/oneplus-2/general/guide-oneplus-2-home-button-dead-t3324321
Click to expand...
Click to collapse
Thanks ! But I tried that all the methods (including clean flash to oos 2.2.1) , but the home button and fingerprint scanner still dead :crying:

Try End of this post --> http://forum.xda-developers.com/showpost.php?p=65677206&postcount=10

Hi I'am having the same problem as your are. Flash from 2.2.1 and still fps not working. I hope someone can address our issue

Hi Again!
You MAy try the work around I did today:
1. Wipe Data and Cache
2. Install OOS 2.2.1-2
3. Check if fingerprint scanner is working if not flash OOS 3.0 Beta 2
4. Activate on screen button and wait for OTA notification
5. Download and install OTA update to OOS 3.0.2
6. Setup up fingerprint scanner, use password instead of other secuirty lock options.
That procedure work for me. Hope this fix your case.
Thanks!

buizon said:
Hi Again!
You MAy try the work around I did today:
1. Wipe Data and Cache
2. Install OOS 2.2.1-2
3. Check if fingerprint scanner is working if not flash OOS 3.0 Beta 2
4. Activate on screen button and wait for OTA notification
5. Download and install OTA update to OOS 3.0.2
6. Setup up fingerprint scanner, use password instead of other secuirty lock options.
That procedure work for me. Hope this fix your case.
Thanks!
Click to expand...
Click to collapse
I tried it just now , the problem is still there.
Btw, thanks and congratulation on fixing your phone hahaha

Have you flashed a custom rom ? Someone fixed it by flashing CM 13 (see my post above)
Sent from my ONE A2001 using XDA-Developers mobile app

terrorlove said:
I tried it just now , the problem is still there.
Btw, thanks and congratulation on fixing your phone hahaha
Click to expand...
Click to collapse
You may have to try again as this was my case. I hope you fix yours soon cause I know how you feel when that thing happened to me.

B!Gguy said:
Have you flashed a custom rom ? Someone fixed it by flashing CM 13 (see my post above)
Sent from my ONE A2001 using XDA-Developers mobile app
Click to expand...
Click to collapse
Currently submitted a ticket about the problem to oneplus, they mentioned in the reply that they will assist me with a Remote Session to try and fix the phone. If the problem is still there after this, might as well as try to flash a custom ROM. Thank you !

buizon said:
You may have to try again as this was my case. I hope you fix yours soon cause I know how you feel when that thing happened to me.
Click to expand...
Click to collapse
Well I submitted a ticket to oneplus, and they will assist me with a Remote Session to fix my phone. I do hope that this works haha

I'm in the same position as you. My phone had been great for the past 6 months. ✌ days the fingerprint sensor told me ?
I've tried going back to stock 2.2.1 and stock recovery; I've tried draining the battery but still no go for me.
Sent from my ONE A2005 using Tapatalk
---------- Post added at 09:16 PM ---------- Previous post was at 09:12 PM ----------
I'm going to try flashing cm13 tonight. Thanks for the suggestion.
Sent from my ONE A2005 using Tapatalk

done almost everything flashed Oos 2.2.1 ,CM,PA 3.0 beta Oos,3.0.2 Oos but it still says fingerprint cant reach hardware and blah blah

If all software fixes fail, it's hardware.
First try RMA.
Still want a dirty fix try this.
Go to the near electronic store and grab some contact cleaner and spray it over the FP sensor leave it until it dries, repeat a couple of times and reboot.
Has worked for me couple of times in the last week but it fail again in couple of days.
Sent from my ONE A2005 using Tapatalk

Try force shut down 3 times in a row... Holding power button until it shuts down
Sent from my ONE A2003 using XDA-Developers mobile app

Hi, I got the same problem, did anything here worked?

I'll repeat this over and over again, its a hardware fault. Get it sent out for repair.

I am facing the same problem dont knw what to do tried everything but when the sensor start to work the home button continuously starts to get pressed it self

It's a production fault, just like the touch screen on the Oneplus One.

what worked for me: start in safe mode
go to settings > apps > system: search for fingerprint service
tap storage > clear data + cache + force stop
reboot

It is possible to install stock rom using TWRP/fastboot on WAS-LX1?

REALLY BAD ENGLISH
So im totall newbie,and i had some issues with snapchat,so i unrooted my phone,and then clear snapchat cache,and login again - it worked. But i had to install Magisk again usign TWRP,but i had only old magisk update on pc (my pc didnt have internet connection this time,some problems with ISP) so i used my friend phone as a internet provider.Then i flash magisk to phone,everything works,but youtube videos have error,i dont hear any sounds,and playing gallery videos makes gallery crash,camera app close and open itself after launch. So i decided to make hardreset. By a mistake i launch TWRP,but i tought that wipe is nearly same. I forgot to uncheck somethings,and then i click "wipe" button. After i launched my phone, i didnt see setup of new clear system,but a cloack,my mobile network operator name, and wifi,battery status - just a normal "login" screen.
I unlocked screen and i see black color - just whole screen was black. I restarted phone, and same thing happened. I decided to flash stock rom,and here we are - where problems started to show up.
1.Questions Where i can download stock rom for Huawei P10 lite Dual Sim Poland WAS-LX1,and how to install it using TWRP?
Do i need to use stock recovery if i want stock rom? Becasue When i will remove TWRP and add stock recovery,i cant use adb - which is probably very usefull huh?
I would ask about much more but i just have to go to job,i will back soon.
Please help!

In short, the answer is YES!
But in practice, I personally do NOT recommend it because I tested it and had problems during installation.
You need to know what is the exact model (WAS-LX1 or WAS-LX1A or other) and region on your phone!
If you want to try here is how:
- You need Twrp P10 Lite by KingOfMezi : https://mega.nz/#!WFYWEJjJ!HZGsY4WKdbYGr6M8VEeztDCzQe6UN020ro6f_g6V8FY
- Install TWRP
- Download Stock ROM based on your region and phone model: https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
- Go to TWRP -> Wipe -> Advanced Wipe and check:
-> Davilk / Art Cache
->Cache
->Data
->Internal Storage
->System
->Vendor
->Product
- Wipe selected partitions
- Go to Install menu and install your ZIP
I have received these problems several times:
-> Keep in mind that you will most likely get errors during installation (99.99% ;p)
-> First boot may NOT happed or last forever
-> Second boot may says "Data partition coruped" and go to eRecovery, Low Level Format or similar error, etc.
-> Third or Fourth boot may be successful
So I DO NOT recommend flashing these Stok ROMs!
Here is what I recommend:
Your phone is Dual SIM WAS-LX1, region C432, right?
Download this: http://androidhost.ru/JT
In the root directory of your SD Card create a folder "dload"
Put the file UPDATE.APP and folder WAS-L21_hw_eu (contains the file update_WAS-L21_hw_eu.app) inside your dload folder
Must be:
"\dload\UPDATE.APP"
and
"\dload\WAS-L21_hw_eu\update_WAS-L21_hw_eu.app"
- Turn OFF you phone
- Put the SDcard in your phone
- Press and hold all 3 buttons Vol+ and Vol- and Power until you see EMUI update menu
- After successful upgrade you will have STOCK Rom WAS-LX1C432B182
Warning:
Bootloader will be LOCKED (you need to unlock it again if you need)
you will have STOCK RECOVERY (if you want TWRP you have to flash it again)
It's very very easy to do it

I have a question - i use my sister phone to put files from your link into sdcard,but wheen i move update.app to dload folder - it simply disapear

and does it work if i have twrp,becasue many people say that if u dont have stock recovery your method wont work.
Thanks for any replies!

Perhaps something is wrong! I don't know why these files disappear, try another SDcard. During installation TWRP will be replaced with Stock recovery and your Bootloader will be locked.
Videos:
https://www.youtube.com/watch?v=AokzzNYTFnE
or
https://www.youtube.com/watch?v=0vDgDXePAR4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

It worked. Thank You!

problems
Hello . I have a problem with my WAS-LX1. I unlocked the bootloader. I installed the TWRP red version from KingOfMezi. I wipe all the data exactly as in the video. I flashed Elemental V2. I chose the LX1 smell and the rest just like in the movie. I get the OK message. After my restart my phone restarts again, and after the second restart I go into android, I choose the wifi network and after about 1 minute it restarts again. After another minute restart. And so to the end. Right now I have the original WAS-LX1C432B204 software on it. can somebody help me please. :crying:

armaghejohn said:
Hello . I have a problem with my WAS-LX1. I unlocked the bootloader. I installed the TWRP red version from KingOfMezi. I wipe all the data exactly as in the video. I flashed Elemental V2. I chose the LX1 smell and the rest just like in the movie. I get the OK message. After my restart my phone restarts again, and after the second restart I go into android, I choose the wifi network and after about 1 minute it restarts again. After another minute restart. And so to the end. Right now I have the original WAS-LX1C432B204 software on it. can somebody help me please. :crying:
Click to expand...
Click to collapse
cant tell if there is something like "bump" on this site,but i will BUMP just for you. Im real newbie,so i wont help you.you should create new thread on this forum i think. Good Luck!