Database Users

Sim Unlock - Honestly FREE

Hi all.
IMPORTANT S7 T-Mobile and S8 T-Mobile are Qualcomm based and MY METHOD DOES NOT WORK. I WILL UPDATE WHEN/IF IT DOES
UPDATE 27.01.2018
MAGISK........
I am having trouble unlocking on phones with Magisk installed for ROOT
Nothing against Magisk, I personally use and love it. Feel free to install this AFTER UNLOCK
I'm just having trouble with the unlock using Magisk.
I am offering a free unlock via
I will still gladly accept any donations that come my way via PayPal ([email protected])
But DONATION is 100% OPTIONAL
All i ask is RESPECT and PATIENCE. (if these are not given then I may CHOOSE not to help you)
Remember this is taking time away from my wife and family to help YOU!
This is a FREE remote unlock service. AT YOUR OWN RISK.
No, I will not share my method..... as it could get patched by Samsung.
Here we go........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE
F.A.Q
Q. What if my IMEI is bad or blacklisted?
A. There are a few times of blacklist... T-Mobile seems to block INTERNAL only if non payment. Others will block if non payment or lost/stolen.
This does not effect SIM unlock, I can do it regardless.... However, you WILL NOT GET NETWORK SIGNAL IF BLOCKED
Check here for T-mobile https://www.t-mobile.com/verifyIMEI.aspx and also here for all models http://imei24.com/blacklist_check/
If you are not sure ask first!
Q. Can you change/repair my IMEI?
A. HELL NO. This is not only against XDA Rules but it is illegal in most countries, including mine.
Q. Is this really free?
A. Yes, although I do hope for a donation for my time and effort
Q. When are you available?
A. See below.
Q. Can we get on with it all ready?
A. Yes!
Remote Sim Unlock Preparation
Contact
Please be considerate of my time zone this it GMT +03 (UTC +13), check here NZDT https://www.timeanddate.com/time/zones/nzdt I am usually available after work 5PM until 8PM.
I am also available some weekends. Leave me a message on hangouts here with [email protected] and i will get back to you ASAP.
Please contact me when you are ready after reading below. Contact [email protected] via Google Hangouts.
If you do not have a reply within 24 hours then please email me with your gmail address on [email protected] and I will add you to hangouts.
Google Hangouts is needed so you can follow directions as I unlock your device. Everyone with a Google accounts has Google Hangouts.
You can access it via hangouts.google.com
Phone Settings ALL Models
Disable FRP by enabling OEM UNLOCK
http://techbeasts.com/how-enable-oem-unlock-android-lollipop-marshmallow/
Enable USB debugging
https://forum.xda-developers.com/fire-phone/general/guide-enable-usb-debugging-setup-t2859697
Revoke USB authorization (if applicable)
Developer Settings > Revoke USB authorization
GSM Only
Phone dialer > *#0808# > USB = AP
Phone dialer > *#0808# > USB SETTINGS = DM + ACM/MODMEM + ADB (note, will say ACM or MODEM)
If and only IF the above doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet)
SPRINT Only
Phone dialer > ##3424# >Qualcomm USB settings > DM + ADB + Modem
If the above asks for MSL or doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet) then we can get MSL to enable the above if you need MSL
For those that don't know... the 5th to last digit in the firmware is the BOOTLOADER (BL) version. YOU CAN'T GO BACK!!
i.e G920TUVU5EQC2 the BL version is 5 so you can't flash anything less than BL version 5
PC
You will need a Windows PC for the software. Please ensure you have Windows 7 or newer
Windows Vista and XP are NOT RECOMMENDED (for anything lol).
Please download FlexiHub http://www.eltima.com/wiki/user-guides/flexihub-windows/installation.html and install on your PC.
Please reboot after install.
Please create a FREE flexihub account here https://flexihub.eltima.com/user/registration/ AFTER ENTER DETAILS, YOU WILL SEE A PAYMENT PAGE... CLOSE WINDOW NOW. FREE ACCOUNT ALREADY CREATED
Or I have a few accounts if you wish to use one just let me know.
Please have FlexiHub open and logged in.
Unlocking Process
When you have contacted me and I have replied that we are ready you may proceed to:
Open flexihub and log in to your account
DO NOT SEND COM PORT. THIS IS USELESS TO ME ALONE
If needed click 'UNLOCK' on the phone's driver so it can be accessed (i.e Samsung_Android OR Gadget_Serial OR MSMxxxx)
Right click on your phone's driver in flexihub(i.e Samsung_Android OR Gadget_Serial OR MSMxxxx) and click send invite.
Type in [email protected] and click OK.
I will connect to the device and proceed from there.
Please watch phone for USB Authorization prompt.
Check the box then press OK.
I will disconnect and reconnect as required (using FlexiHub).
Watch phone Screen for SU (ROOT) prompt and press GRANT.
All you need to do is watch the phone for USB Authorization and ROOT grant.
Please follow the instructions I send via Google Hangouts
After we are finished you can return your device settings to as they were and you can remove FlexiHub from PC.
Please kindly donate via PayPal to [email protected] (once again 100% optional)

I saw your old thread was locked due to requiring donations. Good on you for offering it free to the public again! It's good to help people, but family is pretty important, and although it was against XDA rules, there's no shame in asking for compensation for your work. Good luck!

@stifilz I'll be hitting you up sometime soon for round 2 on my phone, heh.

Im still doing this been very few at the moment :/

I read the op but wanted to know if you have tried cdma phone (I have the sm-n920p

Samsung Galaxy S5 (SM-G900P)
Thanks for offering this service for free again.
I have a Sprint Samsung Galaxy S5 (SM-G900P) with G900PVPU3CPCA baseband. I'm wondering if you can help unlock this.
Thanks

cafedeluv said:
Thanks for offering this service for free again.
I have a Sprint Samsung Galaxy S5 (SM-G900P) with G900PVPU3CPCA baseband. I'm wondering if you can help unlock this.
Thanks
Click to expand...
Click to collapse
Yes. Follow OP

Bad luck
Thanks a lot for giving me such valuable time. But my luck doesn't favor me. ????

my n9208 smart locked is now unlocked because of you bro, thank you so much!

hi! i have SM-N920T locked after flashing custom rom. Can you help me?

Thanks OP. This really works very fast and effective.

Bump.
Still doing this.
Few changes made to thread for clarity,
Mainly........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE

Did u get your sprint phone unlocked

Lovebug18 said:
Did u get your sprint phone unlocked
Click to expand...
Click to collapse
????
I can do them, yes. Read first post

Unlock note 8
Hi, Can you help unlock Tmobile At&T note 8? I really want to unlock this phone.Thanks.

kobeamox said:
Hi, Can you help unlock Tmobile At&T note 8? I really want to unlock this phone.Thanks.
Click to expand...
Click to collapse
Not supported

stifilz said:
Not supported
Click to expand...
Click to collapse
ok, do you know if it's possible at all, like are some people in the forumnm capable of doing it? I looked everywhere, but could not find a reliable answer.

kobeamox said:
ok, do you know if it's possible at all, like are some people in the forumnm capable of doing it? I looked everywhere, but could not find a reliable answer.
Click to expand...
Click to collapse
It is possible look on ebay

Do you support Sprint Note 3? SM-900P

Nope. 2013 does

No hotspot on ATT Unlocked LG G6

Hello guys,
Im a bit desperate, when I try to enable mobile hotspot on my ATT Unlocked LG G6 (H871) it says auth failed and just won't share internet connection not thru wifi nor USB cable.
Please I will really appreciate your help, I need to work with my computer all the time using this function.
Thank you

An 871 may be carrier-unlocked, but it is not bootloader-unlocked. You can't root or install a different ROM, so you're stuck with AT&T's stock ROM; and if they don't have hotspot enabled in their build, there's nothing you can do about it as far as I know. Chances are their build is still trying to phone home to the carrier to check if you have hotspot in your data plan.

dwasifar said:
An 871 may be carrier-unlocked, but it is not bootloader-unlocked. You can't root or install a different ROM, so you're stuck with AT&T's stock ROM; and if they don't have hotspot enabled in their build, there's nothing you can do about it as far as I know. Chances are their build is still trying to phone home to the carrier to check if you have hotspot in your data plan.
Click to expand...
Click to collapse
There should be an option to do something, do you know if the fix with and ADB command will fix it?

Maurelo23 said:
There should be an option to do something, do you know if the fix with and ADB command will fix it?
Click to expand...
Click to collapse
There are a bunch of third party tethering apps in Play Store, maybe you should try one of those.

Just had this same issue and found a solution, check the settings database editor mentioned here, as it worked on my at&t unlocked g6
https://forum.xda-developers.com/att-lg-v10/themes-apps/activate-hotspot-unlocked-lg-v10-t3585697

DMage said:
Just had this same issue and found a solution, check the settings database editor mentioned here, as it worked on my at&t unlocked g6
https://forum.xda-developers.com/att-lg-v10/themes-apps/activate-hotspot-unlocked-lg-v10-t3585697
Click to expand...
Click to collapse
It seems like I need root, something we do not currently have. How did you fix it?

DMage said:
Just had this same issue and found a solution, check the settings database editor mentioned here, as it worked on my at&t unlocked g6
https://forum.xda-developers.com/att-lg-v10/themes-apps/activate-hotspot-unlocked-lg-v10-t3585697
Click to expand...
Click to collapse
THANK YOU THANK YOU! That did the trick now working! Awesome.

DMage said:
Just had this same issue and found a solution, check the settings database editor mentioned here, as it worked on my at&t unlocked g6
https://forum.xda-developers.com/att-lg-v10/themes-apps/activate-hotspot-unlocked-lg-v10-t3585697
Click to expand...
Click to collapse
Good to know.

1. Download "Settings Database Editor" at the playstore. The icon is a blue cog with red background.
2. Make sure youre in the "settings table" list
3. Find "tether_entitlement_check_state" then set it to "0".
Exit, should be working, if not, try a reboot.

SamaelThuum said:
1. Download "Settings Database Editor" at the playstore. The icon is a blue cog with red background.
2. Make sure youre in the "settings table" list
3. Find "tether_entitlement_check_state" then set it to "0".
Exit, should be working, if not, try a reboot.
Click to expand...
Click to collapse
you are the ****in boss, it worked
(sos el puto amo, me funciono en mi LG G6 de At&T)

1. Download "Settings Database Editor" at the playstore. The icon is a blue cog with red background.
2. Make sure youre in the "settings table" list
3. Find "tether_entitlement_check_state" then set it to "0".
Exit, should be working, if not, try a reboot.
This worked!
Thank you so much!

1. Download "Settings Database Editor" at the playstore. The icon is a blue cog with red background.
2. Make sure youre in the "settings table" list
3. Find "tether_entitlement_check_state" then set it to "0".
Exit, should be working, if not, try a reboot.
Click to expand...
Click to collapse
This is perfect - it worked like a charm. I have unlocked AT&T LG G6 (H871) that I use on T-Mobile network and previously I always had "authentication was unsuccessful" error. But now the error is gone and it works!

SamaelThuum said:
1. Download "Settings Database Editor" at the playstore. The icon is a blue cog with red background.
2. Make sure youre in the "settings table" list
3. Find "tether_entitlement_check_state" then set it to "0".
Exit, should be working, if not, try a reboot.
Click to expand...
Click to collapse
Worked in the moment!!!!! Ty

[YT3-X90L] Lock state - locked - Recovery image needed

Hello XDA-Community,
I've got a Yoga Tab 3 Pro YT3-X90L from a customer.
He was telling me, that he wanted to unlock his device with the pattern, mismatched for several times and now its locked and requires the owners google account. Or something like that. He never had the owners google account. He told me that his seller has activated his device for him. And he has no clue who it was.
Now here is my part.
I've researched and obviously it's a FRP. The owners google account information are stored in the FRP-Partition. And this partition won't get deleted with a simple factory resett.
What i've tried so far:
1.) https://www.youtube.com/watch?v=nCzrnnh2K1w I was able to follow this tutorial to minute 9:08. But the option "Email and password" is not there anymore. I guess they patched it with 6.0.1.
2.) I tried to flash a stock rom or twrp with LenovoDownloader(QcomDLoader). The stock rom file is: Lenovo_Yoga_Tablet_3_YT3-X90L_ENG_S200028_1609230146. even its a german device this file was the only one i could find. But the LenovoDownloader won't recognize my device. The windows stays white, no entries. I guess i installed the correct driver for this device and Windows recognizes them as removable device if i plug it in via usb.
3.) I've tried to use adb and fastboot boot oem unlock. But this commands aren't working in locked state.
4.) With a trick i could open the Settings and was full of hope to active the developer options to set usb debbuging to active. But this developer options aren't available either with this "user".
5.) There is an apk for showing the "Email and password" interface. I could install it, but it force closes right after starting it.
6.) I've tried several tools to bypass this FRP: WinDroid Toolkit, D-G Unlocker, Realterm, but NOTHING.
What could i do further? I'm out of ideas right now.
I've read about a factory_update.img but i cant find anything, except the stock rom file, for this device.
Or downgrading the device, so i could use the "Email and password" but. But i can't even flash the stock rom.
Specs for the device:
Lenovo Yoga Tab 3 Pro YT3-X90L
Lenovo/YT3_l0_row_lte
6.0.1/MMB29M/LenovoYT3-X90L_S200307_170614
i appreciate any help i can get
greets
redplate

I've wrote it down. Hope this helps.
Situation:
"Confirm account: The device has been reset. To continue, sign in with a Google Account that was previously synced on this device. "
Explanation:
The device has been blocked by repeated input of the wrong password, pattern, etc. and can only be unlocked with the Google account of the owner.
A factory reset or hard reset does not help here, as the account information is saved in its own FRP partition and will not be deleted when the factory state is restored.
Solution:
1. Connect device to a Wi-Fi and Internet access.
2. Before confirming "Next", select another hotspot here
3. Go to "Advanced Settings" and change the proxy settings of any hotspot to Manual.
4. In the text input field of the proxy settings you enter now any word: e.g. Test
5. Now mark this word and select "Assist" in the context menu.
6. Selecting this "Assist" option opens the Google search application.
7. You can now not only browse the Internet through this search, but also search for and open installed programs.
8. We are looking for Chrome, open the internet browser, go to www.google.com and search for DPC test.
Link: https://www.apkmirror.com/apk/sampl...-release/test-dpc-4-0-6-android-apk-download/
9. After downloading this application, go back to the Google search application.
10. Here we enter "Download" to search for the download application.
11. In Downloads we can now find and install the downloaded app.
12. To allow the installation of this .apk, you must allow the installation of "unknown sources" in the settings.
13. Either you go here on the installation itself on "Settings", or you search for "Settings" on the Google search app.
14. After completing the installation of the DPC-Test program, start it with "Open".
15. The app itself is will register as a device owner and now allows us to set up a new Google Account as owner.
16. If this is set up, it will also be included in the FRP partition.
17. In the event of a new factory reset, the device is reset, the DPC-Test program is removed and the device can be freshly set up in the factory settings.
after the takeover of the owner, the reason for blocking the device was not present anymore and the old owner was overwritten. This will be overwritten in the FRP partition aswell with the new account and the old one no longer queried.

You, mister, are my savior! Thank you very much.

Solve works for Lenovo Yoga 3 tablet
Just a big giant thank you! My dad passed away leaving me a Lenovo Yoga 3 tablet, unable to gain access due to information stored in the FRP partition. :highfive:

Hi
I followed your instructions for first 5 points
redplate said:
1. Connect device to a Wi-Fi and Internet access.
2. Before confirming "Next", select another hotspot here
3. Go to "Advanced Settings" and change the proxy settings of any hotspot to Manual.
4. In the text input field of the proxy settings you enter now any word: e.g. Test
5. Now mark this word and select "Assist" in the context menu.
6. Selecting this "Assist" option opens the Google search application.
Click to expand...
Click to collapse
I marked the word and only that is offered on the top right side is : SELLECT ALL - CUT - COPY.
There is no ASSIST option . I don't know, maybe this tablet on my desk has a newer android version with that option removed...
Is there any other solution? Probably will be helpfull for me as well for someone who will have tjis problem in the future
Thx in advance

marOOn1971 said:
Hi
I followed your instructions for first 5 points
I marked the word and only that is offered on the top right side is : SELLECT ALL - CUT - COPY.
There is no ASSIST option . I don't know, maybe this tablet on my desk has a newer android version with that option removed...
Is there any other solution? Probably will be helpfull for me as well for someone who will have tjis problem in the future
Thx in advance
Click to expand...
Click to collapse
Hi. Actually I'm not into this anymore. Could be possible they removed it since it might was reported.
If I have any idea I'll let you know it

How to force 4G only (LTE only) Mode?

Can someone help me I am trying to force my Huawei P10 Plus to use LTE/4G only mode. I have latest Firmware/Patch Level.
I have tryed many service codes in format like *#*#.....#*#* codes but I can not set the LTE Only mode.
Isn't it possible without "root"?

It is possible to force "4G only" without root. First download "Setting Database Editor" from playstore. Open it and look for "hw_networkmode_preferences". I use this value "9,3,2,1,11" on my phone. Save it and restart your phone. If you still don't get "4G only" option then you need to open the "Setting Database Editor" again and look for "hw_add_4g_only". Mine was set to "250". You need to change it according to your country mobile code. Look for your mobile country code here: https://en.wikipedia.org/wiki/Mobile_country_code. In my case I change the value to "250;502" since 502 is my country code. Save it and restart your phone.
Tested on rebranded P10 Plus 256GB.

jula182 said:
It is possible to force "4G only" without root. First download "Setting Database Editor" from playstore. Open it and look for "hw_networkmode_preferences". I use this value "9,3,2,1,11" on my phone. Save it and restart your phone. If you still don't get "4G only" option then you need to open the "Setting Database Editor" again and look for "hw_add_4g_only". Mine was set to "250". You need to change it according to your country mobile code. Look for your mobile country code here: <1. o prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!>. In my case I change the value to "250;502" since 502 is my country code. Save it and restart your phone.
Tested on rebranded P10 Plus 256GB.
Click to expand...
Click to collapse
Thank you very much for your Help! I already installed the DB Settings Editor and found out that hw_networkmode_preferences were already "9,3,2,1,11" so this wasn't the case. Additionally I found that I have to add "hw_add_4g_only" so I added it with the wrong Country Code because I didn't know what the hw_add_4g_only means. I was searching for it a few days now and never got an answer, so I was trying to ask here. And you made it clear now. The Wikipedia Link was very helpful and it works now for my Country. I have to set it 262 for O2 Telefonic Germany.
So again Thank you very very much!

Using Huawei P10 (VTR-L29) 8.0.0.374 (185) solution above works for me too.

jula182 said:
It is possible to force "4G only" without root. First download "Setting Database Editor" from playstore. Open it and look for "hw_networkmode_preferences". I use this value "9,3,2,1,11" on my phone. Save it and restart your phone.]
For me, It works. Huawei P10 Lite
Thanks
Click to expand...
Click to collapse

Worked on my Samsung Galaxy S9

Honor 6X is stubborn as heel... Nothing works.
Can't even find the commands... Sigh!

First Method :
1. Use SIM 1 as the default connection setting
2.
You need to install this app for FREE
at Google Play
https://play.google.com/store/apps/details?id=com.teknokia.force4glteonly
pro version : https://play.google.com/store/apps/details?id=com.teknokia.force4glteonlypro
galaxy store: https://apps.samsung.com/appquery/appDetail.as?appId=com.teknokia.force4glteonly
pro version : https://apps.samsung.com/appquery/appDetail.as?appId=com.teknokia.force4glteonlypro
3. Run the application, press the SIM 1 only or Android testing button. You will enter two LTE Switcher options and also 2 Android testing options.
4. You can try all of them which support your phone.
If the telecommunication operator you are using does not support VoLTE (Voice over LTE) and uses LTE Only Mode, so regular calls will be blocked.
Second Method :
1. DOWNLOAD Force 4G LTE Only 2020 Pro application from Google Play
2. Run the Application
3. Select SIM 1 Only menu, then Hidden Activity
4. wait to load until 100%
5. tap the search box type RadioInfo
6. In the DEvice Info app section, there is a RadioInfo activity.
7. Long Tap 3 options will appear: Create Shortcut, Launch Activity, Edit Shortcut. I recommend Select Create Shortcut to make it easier for us to enter network activity mode without having to bother opening the Force 4G LTE Only 2020 Pro application.
8. Please select Launch Activity to enter the Radio Info
9. Select LTE Only in set preferred network type

I was able to get it working on my huawei y7a sometime last year using settings database editor. Abouy 2 weeks ago i factory reset my device due to an unrelated issue and now when i try to enable it again i get an error saying my system software has rejected the edit. I tried with the version of setedit from f-droid and got the following "Unexpected failure you shouldn't not change private system settings." does anyone know what the problem could be?

K.Hatake said:
I was able to get it working on my huawei y7a sometime last year using settings database editor. Abouy 2 weeks ago i factory reset my device due to an unrelated issue and now when i try to enable it again i get an error saying my system software has rejected the edit. I tried with the version of setedit from f-droid and got the following "Unexpected failure you shouldn't not change private system settings." does anyone know what the problem could be?
Click to expand...
Click to collapse
I have the same issue with p30 pro. It seems to me that after some recent updates, they've locked those settings somehow.

alesu69 said:
I have the same issue with p30 pro. It seems to me that after some recent updates, they've locked those settings somehow.
Click to expand...
Click to collapse
did you find the solution for this problem because i have the same issue and i get the error message from setedit if you have the solution plz respond to me . thx

Make a shortcut to the activity .settings.radioInfo (phone info) of the app com.android.phone (telephone)

namous zakarya said:
did you find the solution for this problem because i have the same issue and i get the error message from setedit if you have the solution plz respond to me . thx
Click to expand...
Click to collapse
I found a solution. You would have to use "Adb shell" (usb debugging).
The code is:
adb shell settings put system hw_networkmode_preference 11

Techie0fficial said:
I found a solution. You would have to use "Adb shell" (usb debugging).
The code is:
adb shell settings put system hw_networkmode_preference 11
Click to expand...
Click to collapse
This worked for me. Thanks

How to turn on Wifi-Calling and VoLTE on 8T after update

Hello everyone!
Finally I've find way to turn on Volte and Wifi calling back on 11.3.4 and 11.4.5!
When i bought the phone on the stock version i had aviability to turn on VoLte and WifiCalling, but after 2 updates - 11.3.4 and 11.4.5, dont why this options gone.
Little guide how to bring back this option on your phone:
1. Use this app "Apk Extractor" to backup your currently Logkit
(https://play.google.com/store/apps/details?id=com.ext.ui&hl=pl&gl=US)
2. Download this version of Logkit: https://drive.google.com/file/d/1bQYKY6tI5O37yXVyXpFYdOHIvMB9iuMt/view
3. Now, open the dialer app and dial *#800# to access the menu.
4. Scroll down and tap the Function switch option and turn on VoLte and WiFi calling.
5. Reboot phone
6. Check Sim & Network option
7. After that reinstal your backup Logkit!
https://imgur.com/a/Yqtn2tt

I do now have the option to turn on wifi calling! However when I toggle it on, it does not stay on. KB05AA on Verizon wireless.

Thanks now I can see mine and it's already on?

Can someone upload the backup of the original apk. I kinda didn't do that. Lol thanks I'm advance. Also mine doesn't stick either. I am on verizon as well.

cameljockey1 said:
Can someone upload the backup of the original apk. I kinda didn't do that. Lol thanks I'm advance. Also mine doesn't stick either. I am on verizon as well.
Click to expand...
Click to collapse
-Michael_ said:
I do now have the option to turn on wifi calling! However when I toggle it on, it does not stay on. KB05AA on Verizon wireless.
Click to expand...
Click to collapse
Sorry guys, but I don't know your operator.
On the stock have you vo and wifi?

Do you have the backed up log kit apk? Can you send it to me please.

Anyone get this working with Verizon?

cameljockey1 said:
Do you have the backed up log kit apk? Can you send it to me please.
Click to expand...
Click to collapse
Here's mine.

cameljockey1 said:
Can someone upload the backup of the original apk. I kinda didn't do that. Lol thanks I'm advance. Also mine doesn't stick either. I am on verizon as well.
Click to expand...
Click to collapse
You can just look for it in the apps, make sure you press "show system app" and after you found the logkit, press "Uninstall updates"
Sent from my unknown using Tapatalk

i already have this option in my mobile v2001, i activated but its not working for some reason, i guess it needs Qualcomm driver update just like op 7..

meshal300 said:
i already have this option in my mobile v2001, i activated but its not working for some reason, i guess it needs Qualcomm driver update just like op 7..
Click to expand...
Click to collapse
You can also activate VoLTE by changing MBN with Qualcomm PDC like OP5/6/7 but you must be rooted now
Follow the guide here
Download archive, read the pdf, it's in french but you have screenshots for explaination, if you have some questions, quote me
It can be usefull just for using software with your parameters / Carrier

hi, i don't find logkit apk in apk extractor. however I displayed the system applications
have an idea why?

i tired to enable volte and vowifi and both are enabled but still no volte or vowifi on my old phone it worked fine same sim in th e8t and its not working any ideas?

Thanks for this. Just tried and I now have the WiFi calling option and it works fine (for Vodafone UK).
Funny thing is even when I reinstall the extracted (backed up) logkit it still doesn't revert to the original one. Uninstalling updates also does revert back but it fine. I can't imagine there's any harm in using the downloaded one.

After upgrading to OOS12 this method is not working any more.. Does anybody have a new solution to get volte vowifi back?

tiuro said:
After upgrading to OOS12 this method is not working any more.. Does anybody have a new solution to get volte vowifi back?
Click to expand...
Click to collapse
In OOS12 and ColorOS12 access to logkit and engineering mode were somewhat hidden by developers.
The easiest way to access toggles is obtained with root access and Magisk.
Just install attached module. Enable VoLTE and VoWiFi toggles.

Thank you! Works flawlessly!

Any help activating VOLTE for un-rooted 8T KB2003 running KB2003_11_c.36 please?

eslonim said:
Any help activating VOLTE for un-rooted 8T KB2003 running KB2003_11_c.36 please?
Click to expand...
Click to collapse
Without root it's quite complicated because on OOS12&13 access to engineering mode via dialer code is disabled.
[GUIDE] Fix/Enable 5G and DSS
Enable 5G and DSS on OnePlus 8T As you may or may not know OnePlus didn't add proper changes into EFS configs to allow us use 5G on every network in the world. This guide will help you unlock 5G access and DSS (Dynamic Spectrum Sharing) and...
forum.xda-developers.com
Secrecy unlock
WARNING - THIS (ORIGINAL) METHOD IS NOT WORKING WARNING - BE CAREFULL REGARDING (your) IMEI SHARING ! You need to enable Developer Options and USB Debugging in the Phone Download the Oppo_Free_Unlock_v1.0.zip Secrecy Auto Unlocker : Open the...
forum.xda-developers.com

Rootk1t said:
Without root it's quite complicated because on OOS12&13 access to engineering mode via dialer code is disabled.
[GUIDE] Fix/Enable 5G and DSS
Enable 5G and DSS on OnePlus 8T As you may or may not know OnePlus didn't add proper changes into EFS configs to allow us use 5G on every network in the world. This guide will help you unlock 5G access and DSS (Dynamic Spectrum Sharing) and...
forum.xda-developers.com
Secrecy unlock
WARNING - THIS (ORIGINAL) METHOD IS NOT WORKING WARNING - BE CAREFULL REGARDING (your) IMEI SHARING ! You need to enable Developer Options and USB Debugging in the Phone Download the Oppo_Free_Unlock_v1.0.zip Secrecy Auto Unlocker : Open the...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks - I will try that. Also I read elsewhere to check with carrier that VOLTE turned on for my account