Database Users

[Guide] Adding Files To SD Card While In Android[No Reboot Required]

I haven't seen a guide on this, so I will make one for you guys. I'm sure many of you have noticed that if you copy a file from your PC to the SD card while in Android, then use the file browser, the file doesn't show up unless you reboot. This is an annoyance when installing apps, so I present to you this guide.
1. Download and extract the Android SDK.
2. In the "android-sdk-windows" open up SDK Setup, and install the USB driver package. [thanks memin1857]
3. Open up the "android-sdk-windows/tools" folder, this is the folder you will be putting your files into, in order to copy them to the SD card.
4. Open a command prompt, and cd into the directory containing the folder in Step 3 (IE: If you extracted the folder to C:\ in step 1, you would do
Code:
cd C:\android-sdk-windows\tools
5. Type ADB Shell
6. Type su to get root access
7. Type mount -o remount rw /sdcard to mount the sdcard
8. Type exit to exit the shell
9. Type adb push nameoffile.apk /sdcard replace nameoffile.apk with the filename of whatever you want to copy
10. Success!
You can also copy folders this way, simply type the folder name instead of the file name, in place of nameoffile.apk. Just tested this with several files, and it works perfectly

YAY!!! Waited for a while allready! Thanks!

good job brother!

wow...this is so complicated...can i suggest another way?which is use an app from market called websharing file/media....this is fastest way for me to transfer files...just connect bot your pc and device to the same connection(wifi).Then you can just transfer files from your pc internet browser...there is no need to install any desktop server client...just direct transfer...speedy too...1 mp3 song just about 5or 6 seconds...if you want download this app in full version and free...i think you can find it on www.4shared.com

Easy version
Droid Explorer works from adb too.
http://de.codeplex.com/
It uses the same mechanism (adb) with Android SDK but has a visual interface.
BTW if you will use android sdk only, you don't need to install all sdk packages (takes huge amount of time), you only need usb drivers.
(Droid Explorer has drivers included)

Or u can jus add the files thru USB connection n use Dev Tools's media scanner.
Sent from my HTC HD2 running DarkStone HD2Froyo v1

Good
Nice, iiNFAMOUS CHRiS

What is the difference between this and Auto Mount which is on the Android Market?

nzxtneo said:
What is the difference between this and Auto Mount which is on the Android Market?
Click to expand...
Click to collapse
When you use Auto Mount, it mounts the USB drive so you can drag/drop files onto the SD card, but if you do that method, when you try to find the file on your phone, Android won't see it unless you restart your phone.

iiNFAMOUS CHRiS said:
When you use Auto Mount, it mounts the USB drive so you can drag/drop files onto the SD card, but if you do that method, when you try to find the file on your phone, Android won't see it unless you restart your phone.
Click to expand...
Click to collapse
Weird, maybe it depends on the build but I have never had to restart the device after I move files over with Auto Mount.
I just remove the usb cable from the HD2 and I got a notification on the top left that says "preparing SD card" and after that I am good to go.

[Q] Access kindle system files via computer

I'm working on installing the Madmack RTL patch on my rooted Kindle Fire. In order to do so, I need to copy files from my KF system directory to my computer so I can replace them. However, when I connect the KF via USB and view its contents, the system directory is nowhere to be found. I have told windows to display all files (including protected OS files). Any tips on how to access the KF system directory on my computer?
Thank you

In fact, I'm not seeing any of the root directory files when I plug the KF into my computer. The Kindle (F) drive (as it is displayed on my computer) only shows the contents of the /sdcard directory.

The USB storage driver on your kindle only mounts the /sdcard partition. That's all you can see using this method.
You have several options to get around this. One that comes to mind is using ADB from your PC. It allows access to your entire filesystem, and it lets you push files, install apks, gives you shell access, etc.
Short of installing ADB, you can simply copy your files to the /sdcard partition. Then, go to your kindle and use something like the root explorer app to copy your files from /sdcard to wherever on the system you need them. Neall

[Q] Best Backup Solution for ROOTED but LOCKED Nexus 7

Hello Everyone,
I recently Rooted my Nexus 7, but did not Unlock it because as I understand it......Unlocking will wipe my data.
I have tried many backup solutions and I find TWRP to be by far the best, but there is one catch and it's bugging me.
TWRP doesn't backup everything. For example "Internal Storage" aka "SDCARD" aka what ever else android calls the directory to be more confusing lol
I have been trying different things to backup what TWRP doesn't cover and it has just been a long frustrating failure.
MTP is terrible. It can't really be trusted and Windows Explorer becomes unresponsive. It worked better when I selected a few folders at a time but still horrible to trust. However I am open to any suggestions.....maybe there is an MTP Client that is better at handling this than Windows Explorer? I don't know.
ADB Kinda sorta doesn't seem to work with a locked device. Although Holo backup which uses ADB seemed to save a lot to a backup file, it didn't work to restore from it. Even tried unzipping it to see what was in that file but no luck. So I don't know if this means ADB is also hopeless or not.
Airdroid / Wifi File Transfer app also don't work very well with certain directories or major transfer sizes.
Any suggestions would be greatly appreciated. I would really like to be able to do the unthinkable which is recover from a Hard Factory Reset, but I am fine with just being able to save a backup of everything that TWRP won't.
Thanks so much in advance.

External USB and Titanium Backup. You can order a cable to use an external usb on amazon for about a dollar.

What about uploading to cloud storage? Dropbox, drive, etc. Might not work so good for large files though.
Sent from XDA app

Not sure why you created another thread on this issue, but what doesn't work with adb? Adb pull /sdcard will pull everything from your sdcard including your twrp backup.
Adb doesn't care if you have a locked boot loader.
Sent from my Galaxy Nexus

KingVeto said:
External USB and Titanium Backup. You can order a cable to use an external usb on amazon for about a dollar.
Click to expand...
Click to collapse
Thanks I already have one and I been using it for the things I tried above. Mine is just a small adapter no cord.
gc84245 said:
What about uploading to cloud storage? Dropbox, drive, etc. Might not work so good for large files though.
Click to expand...
Click to collapse
That would be ok but as you said not so good for large files. plus i would prefer an offline backup solution to toss on my NAS as well.
Pirateghost said:
Not sure why you created another thread on this issue, but what doesn't work with adb? Adb pull /sdcard will pull everything from your sdcard including your twrp backup.
Adb doesn't care if you have a locked boot loader.
Click to expand...
Click to collapse
Honestly it beats me why I can't get ADB to work. Only reason why I though it was related to my bootloader being locked was because some programs / toolkits I used brought up an error saying that it couldnt connect adb due to locked bootloader.
I can't get ADB working and it has been driving me mad lol. I feel like maybe I am doing something stupid wrong when trying to use an adb command.
At this point I would love a noob guide with screen shots on how to use adb command, the adb command line tool....the works on adb lol.
Screenshots would be a huge help to prove that I am not doing something dumb and that I actually have some issue with adb.
Thanks Everyone.

Code:
C:\Users\pirateghost>adb
Android Debug Bridge version 1.0.31
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <specific device> - directs command to the device or emulator with the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --iv <hex-encoded iv>] <file>
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
('--algo', '--key', and '--iv' mean the file is encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
Code:
c:\temp\gnex>adb pull /sdcard

Using your example except for the directory names being different this is what I would get:
(I am using the names of your directories for simplicity....I know enough that mine would vary lol)
After running adb and entering the command as you did. This is the outcome:
'adb' is not recognized as an internal or external command, operable program, or batch file.

HandyAndyXDA said:
Using your example except for the directory names being different this is what I would get:
(I am using the names of your directories for simplicity....I know enough that mine would vary lol)
After running adb and entering the command as you did. This is the outcome:
'adb' is not recognized as an internal or external command, operable program, or batch file.
Click to expand...
Click to collapse
because you have not set adb to be an environment variable.
browse to where your adb.exe is located
make a new directory called n7
hold down shift and right click in the box somewhere in windows explorer
click on open command window here
then type this:
Code:
adb pull /data/media n7/
/data/media and /sdcard are the same location

Pirateghost said:
because you have not set adb to be an environment variable.
browse to where your adb.exe is located
make a new directory called n7
hold down shift and right click in the box somewhere in windows explorer
click on open command window here
then type this:
Code:
adb pull /data/media n7/
/data/media and /sdcard are the same location
Click to expand...
Click to collapse
OK, did that which made perfect sense.
This is what it outputs:
pull: building file list...
0 files pulled. 0 files skipped.
(That was trying it with /media n7/)
The following is when i tried it with /sdcard:
remote object '/sdcard' not a file or directory

HandyAndyXDA said:
OK, did that which made perfect sense.
This is what it outputs:
pull: building file list...
0 files pulled. 0 files skipped.
(That was trying it with /media n7/)
The following is when i tried it with /sdcard:
remote object '/sdcard' not a file or directory
Click to expand...
Click to collapse
/data/media
/data is the partition, media is the directory
/media is looking for a media directory on the root or /

I usually just run...
Code:
adb pull /mnt /N7backup
Which copies everything to a folder called 'N7backup' onto the root of my C:/ drive in Windows...
But, boy... does it take a while! Seriously, I could be half way through 'War & Peace' by the time it's done! (OK, bit of an exaggeration, but you get my point).
For this reason, I rarely use ADB much... I tend to use MTP to copy select folders over - drag'n'dropping folders... Titanium, TWRP, MyStuff, etc., et.al. But even that takes it own sweet time.
---------------------
The N7 is a great device... but it's crippled by the lack of removable storage (microSD), that I can slip into my laptop, and can copy everything within 5 minutes.
Rgrds,
Ged.

Pirateghost said:
/data/media
/data is the partition, media is the directory
/media is looking for a media directory on the root or /
Click to expand...
Click to collapse
I appreciate you're patience with me and the help.
Do I need to do some connect command before doing any of that?

HandyAndyXDA said:
I appreciate you're patience with me and the help.
Do I need to do some connect command before doing any of that?
Click to expand...
Click to collapse
no. the command is simply
adb pull /data/media /nameoffolderyouwanttosenditto

GedBlake said:
I usually just run...
Code:
adb pull /mnt /N7backup
Which copies everything to a folder called 'N7backup' onto the root of my C:/ drive in Windows...
But, boy... does it take a while! Seriously, I could be half way through 'War & Peace' by the time it's done! (OK, bit of an exaggeration, but you get my point).
For this reason, I rarely use ADB much... I tend to use MTP to copy select folders over - drag'n'dropping folders... Titanium, TWRP, MyStuff, etc., et.al. But even that takes it own sweet time.
---------------------
The N7 is a great device... but it's crippled by the lack of removable storage (microSD), that I can slip into my laptop, and can copy everything within 5 minutes.
Rgrds,
Ged.
Click to expand...
Click to collapse
I agree with the first part but I would like to understand and get ADB going and give it a try myself.
As for the "crippled by lack of removable storage" ..........if you are rooted you can use an adapter to go from the usb port on the nexus to a regular USB port then you can use usb flash drives or any kind of usb storage / card reader whatever. You will need to be rooted / have that adapter / and install an app like StickMount so the device can see the drive and mount it as a directory. This works great.
Thanks

Pirateghost said:
no. the command is simply
adb pull /data/media /nameoffolderyouwanttosenditto
Click to expand...
Click to collapse
This should work but instead right away it outputs this:
pull: building file list...
0 files pulled. 0 files skipped.

GedBlake said:
I usually just run...
Code:
adb pull /mnt /N7backup
Which copies everything to a folder called 'N7backup' onto the root of my C:/ drive in Windows...
But, boy... does it take a while! Seriously, I could be half way through 'War & Peace' by the time it's done! (OK, bit of an exaggeration, but you get my point).
For this reason, I rarely use ADB much... I tend to use MTP to copy select folders over - drag'n'dropping folders... Titanium, TWRP, MyStuff, etc., et.al. But even that takes it own sweet time.
---------------------
The N7 is a great device... but it's crippled by the lack of removable storage (microSD), that I can slip into my laptop, and can copy everything within 5 minutes.
Rgrds,
Ged.
Click to expand...
Click to collapse
Sorry I was replying quick and misunderstood.......yes an actual sdcard would not be something I'd say no to. What would be good too is if you didnt have to use either MTP or PTP.....if it just showed up as a drive

HandyAndyXDA said:
I agree with the first part but I would like to understand and get ADB going and give it a try myself.
As for the "crippled by lack of removable storage" ..........if you are rooted you can use an adapter to go from the usb port on the nexus to a regular USB port then you can use usb flash drives or any kind of usb storage / card reader whatever. You will need to be rooted / have that adapter / and install an app like StickMount so the device can see the drive and mount it as a directory. This works great.
Thanks
Click to expand...
Click to collapse
Oh, don't get me wrong - I wasn't trying to dissuade you from using and understanding ADB... and you should give it a try. Definitely. Both Fastboot and ADB are powerful and useful tools, and IMHO you should learn everything you can about them.
I was just grumbling about the data transfer speeds from N7 to laptop...
HandyAndyXDA said:
...if it just showed up as a drive
Click to expand...
Click to collapse
Yes,Yes,Yes... and thrice times YES!.
Rgrds,
Ged.

GedBlake said:
Oh, don't get me wrong - I wasn't trying to dissuade you from using and understanding ADB... and you should give it a try. Definitely. Both Fastboot and ADB are powerful and useful tools, and IMHO you should learn everything you can about them.
I was just grumbling about the data transfer speeds from N7 to laptop...
Yes,Yes,Yes... and thrice times YES!.
Rgrds,
Ged.
Click to expand...
Click to collapse
I understand and agree completely. And, yes i would love to learn as much as i can. This android stuff is awesome and fun.
Thanks again and I like your attitude

BUMP:
So any last ideas on what could be wrong with ADB not working?
I don't blame you if you are stumped at this point.
PS:
At this point I am desperate, so feel free to even ask me noob questions such as .....Did I connect the device to the computer. I won't be offended you guys are a real help.

HandyAndyXDA said:
BUMP:
So any last ideas on what could be wrong with ADB not working?
I don't blame you if you are stumped at this point.
PS:
At this point I am desperate, so feel free to even ask me noob questions such as .....Did I connect the device to the computer. I won't be offended you guys are a real help.
Click to expand...
Click to collapse
UPDATE:
I tried
adb reboot-bootloader
and that worked so why dont
pull
work?

[Q] ADB pull problem on linux

Hi All,
I am in the process of trying to root and install a custom rom on my Nexus 4 4.4.2. I am a new linux user (Linux Mint 16) and my rooting experience is limited. When I try to do an "abd pull /sdcard/ /sdcard/" this is what it says
adb pull /sdcard/ /sdcard/
pull: building file list...
pull: /sdcard/Android/data/com.google.android.gallery3d/cache/imgcache.1 -> /sdcard/Android/data/com.google.android.gallery3d/cache/imgcache.1
cannot create '/sdcard/Android/data/com.google.android.gallery3d/cache/imgcache.1': No such file or directory
I was able to successfully do an abd backup...
USB debugging is enabled.
I get the same error whether the phone is connected as a Media device (MTP) or Camera (PTP).
any reason why the pull command wont work?
Any help is appreciated!

smokewagon said:
Hi All,
I am in the process of trying to root and install a custom rom on my Nexus 4 4.4.2. I am a new linux user (Linux Mint 16) and my rooting experience is limited. When I try to do an "abd pull /sdcard/ /sdcard/" this is what it says
adb pull /sdcard/ /sdcard/
pull: building file list...
pull: /sdcard/Android/data/com.google.android.gallery3d/cache/imgcache.1 -> /sdcard/Android/data/com.google.android.gallery3d/cache/imgcache.1
cannot create '/sdcard/Android/data/com.google.android.gallery3d/cache/imgcache.1': No such file or directory
I was able to successfully do an abd backup...
USB debugging is enabled.
I get the same error whether the phone is connected as a Media device (MTP) or Camera (PTP).
any reason why the pull command wont work?
Any help is appreciated!
Click to expand...
Click to collapse
Maybe this will help?
http://www.herongyang.com/Android/adb-push-and-pull-Command.html
Not a big fan of the CLI.
Sent from my Nexus 7 (2013)

Your problem (almost certainly) is that you don't have a /sdcard directory (folder) on your computer unless you created one (there certainly is no default /sdcard in a linux desktop system).
I also don't know how you installed ADB on your computer.
(This should work, otherwise I'll have to change what I wrote below).
Try this:
$ cd ~/Desktop
(This changes you to your desktop directory, if you are not already there)
$ mkdir sdcard
(this will make a new directory called "sdcard" on your desktop, you should see it pop up on your desktop)
$ adb pull /sdcard/ ~/Desktop/sdcard
(should pull the contents of /sdcard from your phone and put them in your newly created directory on your desktop: ~/Desktop/sdcard)
BAM
A little extra basic info for you, and welcome to linux. Soon you have the power to take over the world (ha ha ha... no, actually I'm not kidding at all).
As a basic rule, you should pretty much always be working inside of your home directory, for dealing with your personal files. Your home directory is /home/yourname. On my computers, my home is /home/kirk. My wife's home directory is /home/amy.
"~" is a shortcut for the home directory, for whomever is logged in at that moment.
If you wanted something that is on your desktop, it would be in the directory: /home/yourname/Desktop (~/Desktop). If you wanted to use your documents directory, it is : /home/yourname/Documents(~/Documents).
/home/yourname is where you usually where want to do your stuff.
"/" is the very root directory of the whole system, so you would be better off not creating and doing things like making directories like "/sdcard". That's a bad move. Leave root for system files. Not that you are necessarily going to destroy something by creating a /sdcard directory. But it'll cause you a few hassles.
So, use /home/yourname/sdcard (~/sdcard). Or if you want it on your desktop, (like I did above) use /home/yourname/Desktop/sdcard (~/Desktop/sdcard). Doing things inside of /home/yourname(~) means that you are the owner of that folder and everything in it, not root.
Otherwise you will just be causing headaches for yourself and having to grant yourself root permissions to work with those files (hassle). There's no good reason to do that to yourself. And if you did give yourself root permissions, and screwed up other stuff in the root directory like in: /etc or /dev or /bin, then you will REALLY be irritated.
Stick to your home for your personal files. /home/yourname (~)
Leave "/" or the "root" directory for system files.

You could check my little bash program for adb for Linux too. It's a program to be used in the terminal and it'll pull data off the sdcard etc. You can find it here
Sent from my Nexus 4 running Android 4.4

Thank you all for the help, I'll let you know how it goes.
Do I need drivers for my nexus 4 to work with Linux?
Sent from my Nexus 4 using Tapatalk

smokewagon said:
Thank you all for the help, I'll let you know how it goes.
Do I need drivers for my nexus 4 to work with Linux?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Try it without any installation of drivers just install adb tools and try the command line or my little tool. If it's not working, check the guides how to set up the usb-rules for adb
Sent from my Nexus 4 running Android 4.4

Thanks, will do.
Sent from my Nexus 4 using Tapatalk

iowabeakster said:
Try this:
$ cd ~/Desktop
(This changes you to your desktop directory, if you are not already there)
$ mkdir sdcard
(this will make a new directory called "sdcard" on your desktop, you should see it pop up on your desktop)
$ adb pull /sdcard/ ~/Desktop/sdcard
(should pull the contents of /sdcard from your phone and put them in your newly created directory on your desktop: ~/Desktop/sdcard)
BAM
Click to expand...
Click to collapse
BAM INDEED! It worked! I am pulling the contents now. Thanks a ton, and thanks for the other basic linux info, I will put it to good use.
Any other tips on using Linux to root android?

Shooooot....
So after the pull command finished, i opened the sdcard directory I created on my desktop, and it was empty....the pull command said this when it was done...
1733 files pulled. 0 files skipped.
2129 KB/s (995292697 bytes in 456.480s)
Any ideas?

Ok, I played with some settings and got it to work, though I don't know why it worked.
USB Debugged is enabled.
The first time I tried to 'pull' i had my USB computer connection set to "Camera (PTP)" - it didn't work.
I tried again changing the USB computer connection to "Media device (MTP)" - it didn't work.
I changed it back to "Camera (PTP)" and my computer recognized it in a different way than the first time (a dialog box popped up asking me what I wanted to do with the pictures that were on the device I had connected, this didn't happen the first time).
I am glad the pull command finally worked, I just wish I knew why.
I guess it's a tough road being a linux NOOB and a (near) Android NOOB. It's good to learn something new and keep my brain young.

to move spotify files to other device

hi, I am changing my mobile and I have downloaded about 700 songs on Spotify. I need to know if there's any way I can move these files to my computer and send it to my new device. is it possible?

Set up adb on a pc. you can download the 15 second installer by XDA member snoop05.
Go to your phone's settings, go to about phone (at the end) tap build number 7 times, you will get a message saying you are now a developer.
there should be new settings called 'developer settings'
go there and enable usb debugging
connect your phone to a pc via usb
tap the 'allow usb degugging from this computer' option on your mobile
open a cmd window
type adb devices
if you get an alphanumberic code, you are successfully connected.
If it says unauthorized in a corner, reconnect and dont touch your phone screen till the 'allow' message pops up
when you're connected successfully, type adb pull /storage/emulated/0. You can be as specific as you want, but you will have to find out where in your phone's storage your songs are saved. NOTE if they are on an sd card, type adb pull /sdcard or /sdext or if those dont work, adb pull /data or adb pull /userdata.
This should pull all your songs to the computer.
---------- Post added at 12:12 PM ---------- Previous post was at 12:03 PM ----------
petelm said:
hi, I am changing my mobile and I have downloaded about 700 songs on Spotify. I need to know if there's any way I can move these files to my computer and send it to my new device. is it possible?
Click to expand...
Click to collapse
if you've pulled extra files to your computer, just delete whatever you don't need.
if you've managed to get your music on your computer, save the songs on your desktop (this is important, it has to be your desktop)
repeat the enabling usb debugging process on your new device
connect it to pc
open a cmd window again
type adb devices to check if you're connected
if you're connected, type adb push then drag and drop the folder with the music into the cmd window and hit enter. if you couldn't do that, type adb push C:\Users\(the name of your user on the PC)\Desktop\(the name of the folder with the songs) /sdcard/
if you want to save the songs to your phone's internal storage and not an sdcard, type
adb push C:\Users\(the name of your user on the PC)\Desktop\(the name of the folder with the songs) /storage/emulated/0
NOTE: this whole process is unecessary if your music is already on an sd card, because then you can just transfer the sd card to your new phone.
good luck!
and you can disable the developer options when you're done if you want.