I have Lg G2 D800. It is stuck in bootloop. It hangs on LG logo screen with a blinking notification lite. It can go into Download Mode but PC did not detect it there. Whereas on hanging logo screen it is detected perfectly well. can be seen in Device manager but not in Download Mode. So i cannot flash stock firmware. There is no stock or custom recovery mode as well so that i could use sideload method. One thing i know is that its boot.img, laf.img problem. If i could go into fastboot mode again i can solve this problem. But do not know how can i corrupt boot partition. Please help me in any way to get out of this situation. Thanks
Related
I have the D802 16gig model and yesterday it was stuck in fastboot mode. So i have followed the unbrick guide to flash the d802 laf and recovery image. After flashing my phone does not work properly, the phone reboots every 10 seconds and the touch screen acts weird, if you touch one spot it register on the other, also the phone has no wifi and no signal. I have tried to flash different tot files through lg flash tool none of them works I have tried all 3 of the tot files but none of them seem to fix the problem, whenever I go into the download mode it shows firmware update straight away and I cannot enter recovery mode either only the hard reset option is available. So is this caused by wrong laf or recovery img and is it fixable
Recently used autorec to install TWRP on my rooted G2 and it booted me into fastboot mode.
i was stuck there and download mode was not working either. It just kept boothing me back to fastboot mode.
So what i did was i flashed a laf.img file via fastboot and download mode came back but not fully. It was not showing the USB symbol, only the words download mode with some blue dots.
I found another thread that said to flash some .img files to the phone via fastboot and i did so.
Now the phone is just stuck on the LG symbol and the computer doesnt recognize it. I've tried everything on these forums and I'm at my wits end. Any help would be greatly appreciated!
Need urgent help. Accidentally bricked my lg g2 and cannot do anything.. Have searched for help almost 6 hours straight.. The main problem is that i can't enter download mode and recovery mode. When booting phone only lg g2 logo shows up with security error. Computer doesn't recognize phone also, so i cant use adb sideload and so on. My lg was rooted but i didnt have any custom recovery . Please help.
What happened? What did you flash?
Hey guys, I have a VS980 that was wrongly flashed with the wrong variant of CloudyG2 3.3, causing it to boot to Fastboot mode only. I used guides available on these forums that said I needed to flash the laf.img partition back to the phone to get it out of Fastboot mode but it now went back to Fastboot mode with a greyish-black screen, it did not even show the LG logo. I know it went to Fastboot mode because running the the "fastboot devices" command returned the phone identity. I then used SRKtook 2.1 to fix the Recovery, and this led to the phone going into QHSUSB 9006 mode. I then used the same SRKtool 2.1 to fix the QHSUSB 9006 issue. The tool successfully completed the process and even prompted me to flash the stock firmware, which I did using LGFlashTool 1.8, and one of the available TOT files (V26A). The flashing process completed successfully with a PASS. The phone powered on okay but with the same greyish-black screen as from before. I know the flashing process completed successfully because the the phone charges okay, the touchscreen works (even with the greyish-black screen I can unlock the screen, I can press the Home, Recents, and Back virtual buttons), and calls made to the SIM card inside the phone will ring). The PC recognizes the phone in MTP mode with Device Manager reporting it as being an LGE MTP Android Device, sometimes as a LG VS980 4G. My issues are these:
- What is it with the greyish-black screen? Anything I can do to rectify it? By the way it is not an LCD issue because I have repeatedly swapped screens from my other LS980 to the VS980 and from the VS980 to the LS980. On the LS980 both LCDs work perfectly.
- I can't get into Recovery mode. All the normal Volume Down+Power combo does is power on the phone. What can I do?
- I can't get into Fastboot mode. What can I do?
I am in the process of downloading every VS980 stock firmware I can find (10B, 11A, 26A, 39A, 24A, 27A). I will flash each to the phone, hopefully there'll be one that will fix my phone.
Hi I have a sprint lg v20. Shows lg boot screen and loops. I try to get into recovery mode to factory reset but says recovery mode please wait then continues looping the lg logo. I have not found anything saying they had a similar problem. As far as I know there is no fastboot mode I can use. Any ideas on how I could fix it? Thanks
Did it just start out of the blue, or did you do something?
-- Brian
Can you get in to download mode? (vol+ then plug in to PC) If so, you may be able to use LGUP to flash a kdz.
Good luck! :fingers-crossed: