Alright, so following some prodding, searching, and questioning, I flashed MIUI V6 to my BLU Vivo Air alongside TWRP.
I will update this post with a detailed, step-by-step guide including my own personal mirrors for your convenience and those of you without 4PDA accounts, which is the Russian equivalent of XDA.
Upon booting, I noticed apps force closing without being launched. Namely Hangouts and Newsstand. I'm sure reinstalling them will resolve the issue rather quickly.
Stay tuned for updates.
Update 1:
TWRP had difficulty mounting data and cache for me, and was unable to format them. This led to applications force closing, window mishaps, and accounts glitching out. I just flashed Carliv recovery, and flashed MIUI with it. Flashing gapps at the moment, and will update you on my progress.
Update 2:
Currently attempting to format data (success), cache (success), and dalvik (success).
Update 3:
Rebooting into MIUI V6, checking if I've entered a bootloop.
5 seconds - Boot animation reached, "MIUI Pro."
165 seconds - Still booting.
180 seconds - Setup screen reached, MIUI V6 flashed successfully.
Update 4:
Google apps flashed successfully, no redraws or force closes this time. Had an issue with the keyboard not registering as being selected, Google voice typing appeared as the default. Pull down notification shader and "choose input method" to select MIUI Smart Keyboard. Signed into Google successfully. Will run preliminary tests on video playback, camera, and multitasking.
Guide:
If you mess up your phone, it is on you, and I am not to be held liable for your actions. This is your responsibility. A lack of planning on your part does not constitute an emergency on mine. With that out of the way, if you encounter troubles, I am more than happy to help you.
Step 1:
Root your phone using one of the links provided. Click HERE for method 1, or HERE for method 2. I personally used method 1 because it was the first I saw. They both get the job done.
Step 2:
Install THIS application (Settings -> Security -> Unknown Sources), and install a recovery. I installed Carliv recovery, and had no problems with it. You can also install TWRP, however, it had issues mounting data and cache. This left it unable to factory reset when I flashed MIUI, which subsequently led to problems. I do not recommend flashing TWRP - You have been warned. Carliv recovery says it can't "mount" cache, although when formatting it does so without a problem. I believe Carliv is supposed to be touch-based, although the touches weren't responding for me. The controls are as follows: Volume +/- for navigating, Power for selecting, and the Back key for, you guessed it, going back.
Step 3:
Install MIUI V6, located HERE, and then install Google Apps, located HERE. After installing, factory reset the device from recovery and reboot into the system. I posted my timestamps at the top of the post, so you can get an idea of how long your flash/boot process should take.
Step 4:
Basic setup. Be ready to fix your keyboard if you had the same issue I did, which isn't even necessarily a problem. Choose WLAN network and sign into your accounts, then you're good to go.
To root the ROM, I recommend finding "iRoot" for your computer. Then boot to recovery and install the SuperSU zip, as it's better than the root app which comes with the iRoot method.
Enjoy your ROM, and be sure to thank our Ruski comrades over at 4PDA!
Special thanks to @DvDwx. (research), @itsJohnuno (answers), and @Milly7 (testing).
All download links are being hosted by me, and I recommend creating mirrors of your own as safety precautions in the event that the files are removed or become unavailable.
Have a phenomenal day or night, possibly even both. If you have any questions, I'll do my best to answer them.
Nice Guide ;D
DvDwx. said:
Nice Guide ;D
Click to expand...
Click to collapse
Push that Guide to Android Development thread, that is a ROM ;D
We need talk with our Forum Administrator to Manage some Topics and Fuse KAZAM Tornado 348 with BLU Vivo Air menu... and try explain to this administrator about the re-branding process to he can add the other phones like AllView, Fly and Gionee to this Phone Menu Threads topics ;D
:highfive:
DvDwx. said:
Push that Guide to Android Development thread, that is a ROM ;D
We need talk with our Forum Administrator to Manage some Topics and Fuse KAZAM Tornado 348 with BLU Vivo Air menu... and try explain to this administrator about the re-branding process to he can add the other phones like AllView, Fly and Gionee to this Phone Menu Threads topics ;D
:highfive:
Click to expand...
Click to collapse
I didn't create the resources in the ROM, I just made a guide to flashing ROMs using a specific ROM as an example. I would feel bad posting it in the developer section because I don't wish to be given credit for the ROM. I didn't make it.
Ilxaot said:
I didn't create the resources in the ROM, I just made a guide to flashing ROMs using a specific ROM as an example. I would feel bad posting it in the developer section because I don't wish to be given credit for the ROM. I didn't make it.
Click to expand...
Click to collapse
i understand that ;D
on my WonderMedia WM8880 Tablet project i share the projects from other developers... but i asked they to have permission to share that, and leave on post the credits with their names... maybe if you talk with developer on 4PDA for permission to do it or ask him if it is possible he share he ROM Project here is will be perfect... anyway Good Guide to Flash this ROM :highfive:
Could you please describe how to flash the carliv recovery. I downloaded the app in step 2 but I can't even seem to install the twrp recovery because phone reboots into stock recovery and I don't even see an option for the carliv one.
dimasp6 said:
Could you please describe how to flash the carliv recovery. I downloaded the app in step 2 but I can't even seem to install the twrp recovery because phone reboots into stock recovery and I don't even see an option for the carliv one.
Click to expand...
Click to collapse
You need have root to do this... And sometimes the root dont work correctly and dont stay giving the rights to aplicantion can work...
DvDwx. said:
You need have root to do this... And sometimes the root dont work correctly and dont stay giving the rights to aplicantion can work...
Click to expand...
Click to collapse
I do have root with Kingroot. So I just need to keep trying until it successfully flashes?
Edit: The app mlp RIO recovery installer constantly freezes on me not allowing me to flash any of the recoveries.
dimasp6 said:
I do have root with Kingroot. So I just need to keep trying until it successfully flashes?
Edit: The app mlp RIO recovery installer constantly freezes on me not allowing me to flash any of the recoveries.
Click to expand...
Click to collapse
You can also try iRoot. Install SuperSU and try using it as the root granter for the recoveries.
Does the magnetometer (compass) work for you guys on the miui rom? It doesn't work for me.
ron580 said:
Does the magnetometer (compass) work for you guys on the miui rom? It doesn't work for me.
Click to expand...
Click to collapse
The app itself hadn't worked for me, I tried it earlier. Have you tested another app? It may be the stock app. I haven't messed with it much, not a huge navigator myself. [emoji14]
Ilxaot said:
The app itself hadn't worked for me, I tried it earlier. Have you tested another app? It may be the stock app. I haven't messed with it much, not a huge navigator myself. [emoji14]
Click to expand...
Click to collapse
The senor doesn't work at all using this rom & google maps wont work properly without it. Also the time on the lock screen and the home screen show different times about an hour apart Other than that everything else works fine.
ron580 said:
The senor doesn't work at all using this rom & google maps wont work properly without it. Also the time on the lock screen and the home screen show different times about an hour apart Other than that everything else works fine.
Click to expand...
Click to collapse
Yeah. I've also noticed that downloading updates is botched, because it downloads an update for a different phone model. If you try to install it the installation will fail, but it won't hurt your phone.
All in all it's a pretty solid ROM for me.
Ilxaot said:
Yeah. I've also noticed that downloading updates is botched, because it downloads an update for a different phone model. If you try to install it the installation will fail, but it won't hurt your phone.
All in all it's a pretty solid ROM for me.
Click to expand...
Click to collapse
Yes its a great rom maybe we can ask the developer if he can fix the issues for us on 4pda. I would do it but i couldn't register on 4pda i kept on receiving an error.
request
Ilxaot said:
All in all it's a pretty solid ROM for me.
Click to expand...
Click to collapse
Known bugs? any screenshot running this ROM please? I'd like to see some, I'm not updated on what's going on with MIUI and btw, great work! thanks in advance!
JesusEMC said:
Known bugs? any screenshot running this ROM please? I'd like to see some, I'm not updated on what's going on with MIUI and btw, great work! thanks in advance!
Click to expand...
Click to collapse
I'll post some tomorrow. Re-read the past 5-6 posts and you'll see the bugs. I think you'll like it. MIUI is certainly different (settings default apps) and such, but it's a formidable ROM and performs relatively well.
ron580 said:
Yes its a great rom maybe we can ask the developer if he can fix the issues for us on 4pda. I would do it but i couldn't register on 4pda i kept on receiving an error.
Click to expand...
Click to collapse
on Captcha you need count the numbers and ignore the russian Letters Like for exemple -> ##22###16## -> 22+16= 38
to can finish the registration... and no, you don't need use VPN or Proxy to create the account :highfive:
ron580 said:
Yes its a great rom maybe we can ask the developer if he can fix the issues for us on 4pda. I would do it but i couldn't register on 4pda i kept on receiving an error.
Click to expand...
Click to collapse
I'm sure he knows about it...and the guy is activity working on the ROM...except the latest update seems to just boot loop from what I've read, rather just wait and see.
itsJohnuno said:
I'm sure he knows about it...and the guy is activity working on the ROM...except the latest update seems to just boot loop from what I've read, rather just wait and see.
Click to expand...
Click to collapse
Our Buddy @SSJGohon found the kernel source code and already shared on some topic(i Already re-shared that on Cyanogen Mod to Mediatek SoC's Development thread... but anyone there say nothing about it... and already shared on 4PDA to maybe the MiUi developer can Bring something to All...). i already downloaded and already start my research about what can be maked with that and for sure have a possibility to we have a custom Kernel and maybe Custom ROM like PURE AOSP, AOSPA... but Cyanogen Mod is more difficult because we don't have a updated Repo Source from MediaTek to work like Driver Blobs to GPU, Bluetooth, Wifi Drivers... etc
My real problem is i don't have all skills to make a custom kernel to Mediatek SoC because a lot of things change from Qualcomm to Mediatek.. but if anyone here want to try development that just search the topics with @SSJGohon comments replays :highfive:
Ilxaot said:
I'll post some tomorrow. Re-read the past 5-6 posts and you'll see the bugs. I think you'll like it. MIUI is certainly different (settings default apps) and such, but it's a formidable ROM and performs relatively well.
Click to expand...
Click to collapse
I've already installed the ROM, it runs smoothly! You were right, I really like it! I had an issue trying to format /data, it took like 15 minutes, and did a hard reset (pressed power button for a few seconds) and tried to format again and it worked. Im a little bit worry cause I've had 2 radom reboots so far.. Any idea of what has happened to me?
Related
Hi to all,
I created this thread here is for existing users, potential users, interested users and experienced users or any casual visitors who wants to know more about the rom. Well, SGS users will ask why create a thread just for this, when there is another one over at the development section. The answers are listed as follows:
To reduce the number of posts in the other thread (reduce spamming) thereby not bogging down the developers with issues that can be solved by the users. And they can spend their time to concentrate what they do best, which is improving the MIUI Rom.
To consolidate questions, problems, bug reports, comments in one place. As you can see from the other thread, many a times, some of the posts which benefits the users were consumed by newer posts. While there is a SEARCH function, I can understand it can sometimes be a challenging task just to sieve through the searched posts results. I know we can't eliminate users posting repeated issues, but at least this will attempt to reduce those posts.
To allow new xda members who are on MIUI but unable to post their ideas, comments, etc. This is also an important avenue to allow new xda members to have a voice. While they may be new, they might have tips, tricks and also can help to resolve issues. Issues brought up can be shared by everyone too.
To allow the developers concentrate on improving the MIUI rom. Who doesn't want a better MIUI? Of course the developers doors will always be open, and will help out whenever they can, but wouldn't it be better for us to let them concentrate on what they do best, and what we want best?
So, to make it successful, I need you guys to help one another out, like what I have seen over the other thread.
This thread belongs to all of you, and I am sure that there is active participations in here.
MIUI has a pretty long history. However, for our device, MIUI has just evolved. Likewise, the user base has just started to grow. There will be times when even the most experienced user or developer will get stumped too, and not able to come up with a solution to resolve. We can see from the other thread that there are diverse views regarding battery life, sdcard issue, etc etc. We will not know since the usage pattern of each individual is as good as your fingerprint. No one is alike. Therefore we seek your understanding that issues not solved immediately will be looked into seriously by the team. There will always be limitations for every rom, regardless what base they come from.
All we ask is whether this rom fits your usage or not. And the only way for you is to try it out. Feel it, experience it, and judge for yourself if this rom fits you, can you live with the shortcomings of the rom. If you decide that this rom doesn't fit your daily needs, you can just simply flash to another rom that fit your needs better. And you can at least tell yourself that I have tried but it is not suitable.
Is this thread some form of advertising? Well, again different interpretations for different people. We will not go into that as we believe the QUALITY OF THE ROM WILL SPEAK FOR ITSELF.
One thing that can be said though, credits goes to the cm7 team, the official MIUI developers too. And each day, we can see breakthroughs. I do foresee a bright future for this rom here.
FAQ Section
[Written by Galnet, g00ndu and me]
Before asking for help, please read through post 1 to post 4. Most of the issues have been addressed in this 4 posts. By doing so, you are helping to keep this thread clean.
1. APP RELATED:
1.1 Apps crashing all the time!
Simply enter recovery mode and do a Format on Data, System, Cache
1.2.1 Apps restored from backup not working
I would always flash from clean and redownload all your apps from market. I know you can backup and restore, but to me this causes alot of issues which people bring up all the time. If you want a clean install and avoid any issues in the long run, then 15 - 20 minutes of redownloading isn't as bad as hours of issues!
Also, if you want to try to restores apps using Titanium Backup, restore "APP ONLY," restoring data causes problems.
1.2.2 3rd party apps force closing
Turn off compatibility mode. Settings > Programs Tab > Manage Applications > All Tab > Select app > Turn off OR IF IT STILL FORCE CLOSES Settings > Programs Tab > Manage Applications > All Tab *again* > Select app > Clear Data > Uninstall and then reinstall using Market.
1.3 Apps not installing
Clear market cache and try again.
1.4 Can't See Paid Apps in Market
Download SGS-Tools and select Market Fix and apply then reboot.
1.5 Downloading from Market Not working
Goto Downloads Press Menu Key and switch Settings to WiFi or Mobile network.
1.6 Searching not working
Simply enter search advanced settings and turn off searching within SMS (Mentioned on Original Post)
2. HARDWARE RELATED:
2.1 SD-CARD Not working or other issues with Camera or Sensors
When flashing if you don't see the Cyanogen Logo after the Samsung one when turning the phone on to enter recovery (After flashing cm7-galaxys-initial-kernel.tar) , then STOP flashing process as you have done something wrong or are trying to install coming from a JVK rom. Downgrade to Froyo or if need be JM1 and start the process over.
Also, camera is not working properly (known bug) – poor saturation and multiple lines running through image.
2.2 External SD card not detected
If your external sd card is not detected even when the kernel had corrected the issue, you most likely has the 2.3.3 bootloaders. You may flash the bootloader (definitely not recommended) or you can restart using EZBase rom or follow galnet's guide in his site.
2.3 Auto rotation/accelerometer not working
If your auto rotation/acceleromter is not working (despite having it enabled in Settings > Common Tab > Display Settings > Auto-rotate screen) then hard reboot (completely switch off device, wait 10+ seconds, and then switch device back on)
2.4 High Battery Drain
Known CM7 bug that is not fixed yet.
2.5 Battery only reports ~96% on full charge
This is a function implemented on ALL 2.2.1+ ROMS (including MIUI, which is based off CM7 2.3.3) so that the battery of the devices do not overcharge. Samsung ROMS falsely report 100% charge, but in actual fact, it also charges to ~96% and that if you watch closely, after a few minutes, the battery will rapidly drop back down to ~96% and stablise.
http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries
2.5 Battery has stopped charging
Battery is known to stop charging when it gets too hot. This is to protect the battery and phone from exploding.
2.6 Phone turns on when I insert charger
This is a known bug (or function LOLS) which is present in the Nexus S ROMS and because the SGS MIUI ROM is a derived from the MIUI Nexus S ROM, SGS will also have this bug/function.
3. ETC:
3.1 Where do I start?
Have a look at Galnet's MIUI Guide and note that you can start from ANY Froyo ROM (Stock and Custom) as long as your device has a Froyo Bootloader.
3.2 Flashing from JVK to MIUI
You must first downgrade the firmware to Froyo (which MUST include a Froyo Bootloader - check in zip via WinRar for boot.bin and sbl.bin) It has been found that the Gingerbread bootloader has caused major problems. It is recommended that you downgrade to Eclair JM1 then upgrade to JS5 (files are avaliable on Galnet's Website) and then follow Galnet's MIUI guide to flash MIUI.
Note that flashing/using any Gingerbread modems such as JVK will not cause problems, it is only the Gingerbread bootloader that is causing problems.
3.3 IMEI SCREWED!
Flash back to JS5 or another Official Rom and it will be restored!
3.4 FLASH AT OWN RISK
If you don't have a clue what you are doing or ODIN is a strange word, then please go over to Galnet's MIUI guide and read it before flashing, make sure you understand the risks and note that the developers are not always available to answer your questions instantly!
3.5 Applying a downloaded theme:
Move theme file anywhere onto your phone's memory (should have a .mtz file extension) > Open Theme Manager > Press on Capacitive Menu Button > Import Theme > Locate and Select the theme you added onto your phone's memory
Alternatively, you can directly move the theme (.mtz) file to sdcard/MIUI/theme/
3.6 (SOME) Themes not changing lockscreen
Check that the theme supports MIUI Gingerbread 1.4.8, older MIUI FROYO themes will not work.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
COPY AND PASTE:
(Insert FAQ here)
In the future, please refer to the MIUI FAQ Section[/URL ] before posting.
TIPS AND TRICKS
1. Download seems to get stuck forever. Download only works with wifi.
To fix, open up the Download App, click menu, select toggle 3g /wif. This normally will work. If it doesn't work, try for 2 or 3 times. Remember to cancel the download from the app. If it still doesn't work, reboot and try again. The best fix will be to boot into recovery, and do a wipe / factory reset and reboot. Before downloading, go to the download app to activate the 3g / wifi toggle.
2. Speaker phone is too loud (Thanks to Ekin)
Goto DSPManager > Phone Speaker > Enable equalizer
Then drag all the zeros on the graph down to about -3.0 but keep them all roughly the same. This will lower the volume on the loudspeaker for everything, fixing your problem. When you want to watch a movie and want to make it louder, go back here and just swipe it to disable. So its only one swipe to get it on/off. In order to keep the settings, you need to hit the Back button for it to register correctly.
Raising it/enabling bass boost seems to kill the quality a little bit, so I recommend not to do those.
I have a Nokia headset that I use, and its a little quite so I do the same trick (except I raise the "headset" equalizer) and this nifty trick is basically the same as the voodoo sound hack which takes proper use of the high-quality sound card inside the Hummingbird.
3. Choppy / Laggy graphics and interface (Thanks to whitesox311)
In the settings under battery options....it has " power saving mode" on automatically....if you disable this it gets rid of all the issues. Also, if you leave "Hi-res graphics" turned off in the launcher settings it vastly improves smoothness.
4a. How to get Swype to work (Thanks to Prototype159)
Download the swype installer.
Follow the directions all the way til the end.
Hit the finish button. Reboot.
If it didn't work, clear data and uninstall swype and the swype installer. Try again.
If you change the kernel, you will have to redo it again.
4b. How to get Swype to work (Thanks to agha123)
Follow the instructions to the tee on this web page ,
http://www.androidpeek.com/2010/12/get-swype-keyboard-working-on-miui-rom/
5. Screenshot (Thanks to hacksome)
Pressing Menu + Volume DOWN -->> Screenshot!
reserved
Sent from my GT-I9000
Hmm...good timing. I have some questions on my own.
I have been reading the installation procedures for a while. This particular line intrigues me
6: Pull out the USB cable and start (in download mode) with 3-button-combo in recovery mode (waiting until samsung logo appears)
How do I start recovery mode within download mode? I don't want to take any risks but wish to understand fully on what I will be doing before I commit.
Another question: Assuming that later I decided MIUI is too buggy, is there a backtrack procedure? Usually I will just reflash with ODIN to a stock rom(eg: JPY) to rid of all the lagfixes etc then to maybe Doc's rom for example.
Since this is a ASOP sort of ROM in GB. how do I go about it?
Noob questions I know but I rather be noob now then to beg for help around later
i dont have the maps application in my rom. After installation i dont see any maps app.
mystifiyer said:
Hmm...good timing. I have some questions on my own.
I have been reading the installation procedures for a while. This particular line intrigues me
6: Pull out the USB cable and start (in download mode) with 3-button-combo in recovery mode (waiting until samsung logo appears)
How do I start recovery mode within download mode? I don't want to take any risks but wish to understand fully on what I will be doing before I commit.
Another question: Assuming that later I decided MIUI is too buggy, is there a backtrack procedure? Usually I will just reflash with ODIN to a stock rom(eg: JPY) to rid of all the lagfixes etc then to maybe Doc's rom for example.
Since this is a ASOP sort of ROM in GB. how do I go about it?
Noob questions I know but I rather be noob now then to beg for help around later
Click to expand...
Click to collapse
It means exactly that. In download mode hold the 3 buttons (vol up, power & home) and release all keys when the Samsung logo appears. After about 5 seconds you will see recovery mode.
You can easily backtrack. In Odin use a fw that has all three files and tick repartition. I use jpu.
Sent from my GT-I9000 using XDA App
sxi200 said:
It means exactly that. In download mode hold the 3 buttons (vol up, power & home) and release all keys when the Samsung logo appears. After about 5 seconds you will see recovery mode.
You can easily backtrack. In Odin use a fw that has all three files and tick repartition. I use jpu.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
@mystifyer,
this is the same answer i will give. it is correct.
thanks sxi200.
Sent from my GT-I9000
vivekrk44 said:
i dont have the maps application in my rom. After installation i dont see any maps app.
Click to expand...
Click to collapse
maps can be downloaded from market.
Sent from my GT-I9000
This is new! I didn't know we can do that!
Shall give it a try this Friday Thanks for the explanation
Another question:
I understand also that ASOP roms don't have the very good codec support. Fair enough. Some threads I seen has mentioned of Moboplayer. I gave it a try. Works well enough in hardware acceleration mode but software decoding mode looks really slow.
Now my question is: Does software decoding mode works better in ASOP roms than say a generic lagfixed rom?
vivekrk44 said:
i dont have the maps application in my rom. After installation i dont see any maps app.
Click to expand...
Click to collapse
Download from Market.
mystifiyer said:
This is new! I didn't know we can do that!
Shall give it a try this Friday Thanks for the explanation
Another question:
I understand also that ASOP roms don't have the very good codec support. Fair enough. Some threads I seen has mentioned of Moboplayer. I gave it a try. Works well enough in hardware acceleration mode but software decoding mode looks really slow.
Now my question is: Does software decoding mode works better in ASOP roms than say a generic lagfixed rom?
Click to expand...
Click to collapse
wow, this one i dont really know. i am not sure if there were bemchmarks being made on that or not.
not a good comparison, but still say this. i ran quadrant for this two roms, and the framerate for samsung is better in 3D, and not much different on 2D.
dont forget samsung did not release the sourcecode, and cyanogenmod do it from scratch. but nevertheless it is still good in aosp.
Sent from my GT-I9000
Prasad007 said:
Download from Market.
Click to expand...
Click to collapse
tks buddy, glad you are here too.
Sent from my GT-I9000
g00ndu said:
tks buddy, glad you are here too.
Sent from my GT-I9000
Click to expand...
Click to collapse
Likewise.
No problem. I will know it after I try this Friday. I can share it then, provided nothing goes wrong.
Quite a fair bit of adventurous users tend to dive in straight without checking the cons of a ASOP rom, only to regret and then flash back. I don't really want to fall in this category.
Multimedia is big for me as I watch alot of animes. This codec problem might give me abit of a headache with the software decoding and probably missing code support.
I think I asked enough. Shall camp here and explore other users' problems.
Thanks for the feedback. Appreciate it.
Did the galnet's instructions and the result is the same. so tired by the way
dr.bahaeddin said:
Did the galnet's instructions and the result is the same. so tired by the way
Click to expand...
Click to collapse
I've PM'ed you, I advise you do a 3 file install of JP2 via ODIN to make sure all your files on the phone aren't corrupted.
Once you have got Froyo installed then please get back to us. (Boot into Froyo and make sure it's all working correctly)
galnet said:
I've PM'ed you, I advise you do a 3 file install of JP2 via ODIN to make sure all your files on the phone aren't corrupted.
Once you have got Froyo installed then please get back to us. (Boot into Froyo and make sure it's all working correctly)
Click to expand...
Click to collapse
got your message man downloading right now. maybe my internal sd makes files corrupted?
dr.bahaeddin said:
got your message man downloading right now. maybe my internal sd makes files corrupted?
Click to expand...
Click to collapse
Pass mate, but if you have a felling this could be the case then format the internal sd, after installing Froyo and then copy the required MIUI files back across to your internal sd and then try to proceed in flashing MIUI again.
galnet said:
Pass mate, but if you have a felling this could be the case then format the internal sd, after installing Froyo and then copy the required MIUI files back across to your internal sd and then try to proceed in flashing MIUI again.
Click to expand...
Click to collapse
ok now i'm on JP2 everything works fine.
Hey.
I'm having difficulties with new cyanogenmod 7.1
I Followed different tutorials and none of them helped me.
I started with stock 2.1 rom and did all the unlocking bootlader stuff , then installed custom kernel and managed to install cyanogenmod 7.1 but then occurred a funny thing . There was only FreeXperia logo showing up, nothing else, and it rebooted all the time. Then I flashed stock rom again and tried to understand what's wrong and tried to use different kernels and nothing.
So my question is. Is there anything I'm missing here?
Henri.
Full wipe after you install rom.
Dot forget to make backups first.
about that...
i always do full wipe after installing roms, so it has to be something else.
Thnks anyway..
But after browsing several topics in XDA forum I saw that I'm not only one with the problem.
If anybody has had the problems like I do and got the solutions, every kind of tips are welcome.
Thread closed
I got it all working, but I don't know what was the reason, because, I just did the whole thing again about three or four times, and then it just booted and worked.
I never could install Cyanogenmod in my phone... could you?
Hey!!!
I could write a total working tutorial how I managed to get to work everything, but it takes time, so if you want tutorial send me private message , so I create it for you.
Henri
Does wifi and/or 3G work for you longer then 15 minutes?
No, but at the moment I'm using RC1 flawlessly.
Sent from my E15i using XDA App
coffee-break said:
I could write a total working tutorial how I managed to get to work everything, but it takes time, so if you want tutorial send me private message , so I create it for you.
Henri
Click to expand...
Click to collapse
umm..why not post it publicly man ? It will be useful for everyone including myself.
Would also like that tutorial
ok,
i'm gonna post it here after finishing it.
So, the wanted tutorial is here!
Firstly it's for xperia x8(E15i) to be superclear.
I'm gonna put that tutorial into steps.
STEP 1
You need to have stock 2.1 rom with baseband XXX015 , if you don't have it, then go to Sony Ericsson's webpage and download the upload service and flash it back into your phone.
STEP 2
You phone has to be rooted. Easieset way is using Superoneclick(sorry, i'm not gonna provide the link, because it's just google-ing thing to you who need rooting program)
STEP 3
Now, everything comes to the unlocking process for bootloader. there is also tutorial how to succeed when using s1tool and msm7227 (if you have problem, then I don't know). Try to undestand the tutorial of doing it.
S1tool is for identifying if your phone is unlocked or not.
and msm7227 is for unlocking
tut is here - LINK
I wish luck, don't brick your phone, but it's not so hard to understand tutorials if you have right phone and right tutorial.
STEP 4
I totally suggest to install stable rom. The reason is that released 7.1 has bugs and incompatibility with some phones and i haven't got wifi and 3g working , but tried different roms and kernels.
I provide links i got from deani77, big thanks to him.
You can try this link for FXP028 ROM - http://www.multiupload.com/IIWIPG1ALH
For FXP030 kernel try this link - http://hotfile.com/dl/132650338/7b17...USTOM.ftf.html
(that release is RC1 of Cyanogenmod 7.1 but I think it's the best at the moment!)
and you download all the files as usual. Rom zip package should be in the SD card's root folder, so you can easily install it after flashing kernel
STEP 5
installing is quite simple actually. You need to use flashtool that is provided with rom(link in step 3)
firstly you flash kernel. Kernel file is the one you downloaded .ftf file. You have to put that file(X8_custom.ftf) into firmware folder which is inside of flashtool folder.
Then you open flash tool and you click FLASH, then appears little window and you click ok and then you need to plug in your phone into usb while holding down back button. Your phone has to be off when you are doing that. Then flashtool identifies your phone and will flash the kernel into your phone. when everything comes smooth then you now have fxp custom kernel. it has clockworkmod recovery and you need to click several times back button when FreeXperia logo appears.
STEP 6
You have to do factory reset and format, also i suggest from advanced menu using format system.
Then you select from the recovery menu install custom zip... and you browse your rom .zip file and if everything is OK then it should display "installing update or smth" if it's done then good for you, you reboot and it should work.
IF YOU WANT GOOGLE APPS , then google the link and install it same way you did with the rom. You can do it any time.
..
So if anything is not understandable then ask. I'm not an expert or anything, I just did things like I described.
Best,
Henri.
i have still had problems with bootloop and passing md5 checksum any idea on how to fix this?
mm.. at the moment I don't know but what that md5 checksum means?
I fixed my bootloop issue when I flashed back to stock rom, then I just did all the steps I describe again (not unlocking bootloader because it was unlocked already) .. but I don't know what's really does the bootlooping thing. I just got lucky. It took me like billion hours until I got it working...
in short: i need the mojo`s stock android rom in a form wich i can flash with twrp!
Hey Guys,
i am new here. i can t undersund why i can t directly write this thread in the mojo dev section where it belongs: http://forum.xda-developers.com/mad-catz-mojo/development
it says i have not enough rights for that - not understundable for me.
to the case:
already from the beginning i had the mojo, i worried becouse there were no recovery system like romanger or twrp available. i worried, if i make me the whole work, with installing configuring apps and system and an error occured, that i will have no posibility to play a working backup back and exact like that, it was comming:
suddenly sixaxis app wasn t working anymore and gave me the error-message: couldn t load hcl-library-something.
i deletet data and cache of this app, deinstalled, reinstalled, still the same proplem. so my worst nightmares came true.
now i had the choice to set the system to factory defaults (not sure if with this the spoken error were fixed) and lose everything and make the whole work again, or forget it and put the mojo to ebay or to look if in the meanwhile a recovery system is available so that i would have the whole work again, but then, through the posibility of recovery i am on the safe side.
so i decide it and i found out that now a twrp was available and and a unoffical cm12 rom:
[ROM][UNOFFICIAL][mojo] CyanogenMod 12 Mad Catz M.O.J.O: http://forum.xda-developers.com/mad.../rom-cyanogenmod-12-mad-catz-m-o-j-o-t2976401
let me say, that i am not a linuxfreak or a nerd. i see me as an enduser. i want to use things only, i don t have the time, nerves and even the intention to be more.
explanation: if you want for example fly to anywhere, you must not know how exact a plain is working, becouse you only want to use it.
so you buy an ticket jump into the plain and thats it.
i say that through i am no expert, i managed to install twrp and i managed to flash the custom rom.
then the problems began. after flashing it seems that i have no root. so i must research an half day to find out that you must hit seven times dev options to give the root setting free. i don t understund why people do this and don t give this information clear out. if anyone is able to install an costum rom, then you must not save him, with trying to hide the posiblity of root! this makes no sense for me.
my problem actual is that i need the stock rom, becouse the only thing i ever wantet was a working recovery system and this i have now.
i only installed the cm12 rom, becouse there was no stock rom, so i have had no choice.
I hope anyone can provide me the orginal mojo stock rom that i can flash it with twrp.
so if possible, please help me.
best regards
p.s.: forgive me my bad english wich isn t my foreign language. my german is much better
[email protected] said:
in short: i need the mojo`s stock android rom in a form wich i can flash with twrp!
Hey Guys,
i am new here. i can t undersund why i can t directly write this thread in the mojo dev section where it belongs: http://forum.xda-developers.com/mad-catz-mojo/development
it says i have not enough rights for that - not understundable for me.
to the case:
already from the beginning i had the mojo, i worried becouse there were no recovery system like romanger or twrp available. i worried, if i make me the whole work, with installing configuring apps and system and an error occured, that i will have no posibility to play a working backup back and exact like that, it was comming:
suddenly sixaxis app wasn t working anymore and gave me the error-message: couldn t load hcl-library-something.
i deletet data and cache of this app, deinstalled, reinstalled, still the same proplem. so my worst nightmares came true.
now i had the choice to set the system to factory defaults (not sure if with this the spoken error were fixed) and lose everything and make the whole work again, or forget it and put the mojo to ebay or to look if in the meanwhile a recovery system is available so that i would have the whole work again, but then, through the posibility of recovery i am on the safe side.
so i decide it and i found out that now a twrp was available and and a unoffical cm12 rom:
[ROM][UNOFFICIAL][mojo] CyanogenMod 12 Mad Catz M.O.J.O: http://forum.xda-developers.com/mad.../rom-cyanogenmod-12-mad-catz-m-o-j-o-t2976401
let me say, that i am not a linuxfreak or a nerd. i see me as an enduser. i want to use things only, i don t have the time, nerves and even the intention to be more.
explanation: if you want for example fly to anywhere, you must not know how exact a plain is working, becouse you only want to use it.
so you buy an ticket jump into the plain and thats it.
i say that through i am no expert, i managed to install twrp and i managed to flash the custom rom.
then the problems began. after flashing it seems that i have no root. so i must research an half day to find out that you must hit seven times dev options to give the root setting free. i don t understund why people do this and don t give this information clear out. if anyone is able to install an costum rom, then you must not save him, with trying to hide the posiblity of root! this makes no sense for me.
my problem actual is that i need the stock rom, becouse the only thing i ever wantet was a working recovery system and this i have now.
i only installed the cm12 rom, becouse there was no stock rom, so i have had no choice.
I hope anyone can provide me the orginal mojo stock rom that i can flash it with twrp.
so if possible, please help me.
best regards
p.s.: forgive me my bad english wich isn t my foreign language. my german is much better
Click to expand...
Click to collapse
try:
ftp://86.54.116.234/pub/software/mojo/
Not sure if it's flashable
gwaldo said:
try:
Not sure if it's flashable
Click to expand...
Click to collapse
i am also not sure if its flashable and i don t want destroy my mojo.
you are the first one, since i startet this threat, who are concern and tried to help.
thank you!
greetings
[email protected] said:
i am also not sure if its flashable and i don t want destroy my mojo.
you are the first one, since i startet this threat, who are concern and tried to help.
thank you!
greetings
Click to expand...
Click to collapse
Hi,
I'm not an andriod expert , and i too have no interest in trashing my mojo.
maybe ask on the dev forum for cm12 thread.
I'm 75% sure it will work :-\
gwaldo said:
Hi,
I'm not an andriod expert , and i too have no interest in trashing my mojo.
maybe ask on the dev forum for cm12 thread.
I'm 75% sure it will work :-\
Click to expand...
Click to collapse
i tried to write there:
i am new here. i can t undersund why i can t directly write this thread in the mojo dev section where it belongs: http://forum.xda-developers.com/mad-...jo/development
it says i have not enough rights for that - not understundable for me.
Click to expand...
Click to collapse
, but its not possible for me and it looks my thread get not moved to the correct section.
maybe someone with an stock mojo can install twrp:
[RECOVERY][mojo] TWRP 2.8.2.0 recovery Mad Catz M.O.J.O. :http://forum.xda-developers.com/mad...overy-twrp-2-8-2-0-recovery-mad-catz-t2973640
make a bakcup of his system with it and give me the rom.
i think this should work.
[email protected] said:
i tried to write there:
, but its not possible for me and it looks my thread get not moved to the correct section.
maybe someone with an stock mojo can install twrp:
[RECOVERY][mojo] TWRP 2.8.2.0 recovery Mad Catz M.O.J.O. :http://forum.xda-developers.com/mad...overy-twrp-2-8-2-0-recovery-mad-catz-t2973640
make a bakcup of his system with it and give me the rom.
i think this should work.
Click to expand...
Click to collapse
You can ask in the cm12 thread
gwaldo said:
You can ask in the cm12 thread
Click to expand...
Click to collapse
thank you! did so.
[email protected] said:
thank you! did so.
Click to expand...
Click to collapse
It's flashable just flash the zip and your back on stock.
Unjustified Dev said:
It's flashable just flash the zip and your back on stock.
Click to expand...
Click to collapse
thats sounds great. thanks!
can you please say me wich file exactly i need from the link?
there are several .zip files
[email protected] said:
thats sounds great. thanks!
can you please say me wich file exactly i need from the link?
there are several .zip files
Click to expand...
Click to collapse
I use MO0205-TS
Unjustified Dev said:
I use MO0205-TS
Click to expand...
Click to collapse
thank you very much! then my problem should to solved.
you also seem to be responsible for the MOJOs twrp-port. also thank you for that!
i was waiting for such an recovery system since i bought the mojo.
now i can work without beeing afraid to have no backup for the worst case.
nice work!
greetings
Unjustified Dev said:
It's flashable just flash the zip and your back on stock.
Click to expand...
Click to collapse
Unable to flash on my end. It's there an update to this?
paulie_gogetit said:
Unable to flash on my end. It's there an update to this?
Click to expand...
Click to collapse
Flash, the remix OS rom first and then flash this rom. It has to do with the partition structure. i was also unable to flash the stock rom after having CM12 on my mojo, but I first flashed remix OS and then was able to flash the stock rom.
I'm now running the stock rom happily and will not go back to any custom roms. The bottom line is that there is just one dev doing custom rom work and while I appreciate his work, It just doesn't seem like any of the custom roms are there yet in regards to stability.
Is there a keyboard sequence to get into recovery? I have bricked my MOJO because I failed to realize that it failed to flash the stock firmware after I wiped it.
(EDIT) I found a solution to the above!
Okay so the method I used to get into recovery is to use the MoDaCo root tool and edit the superboot-windows.bat file and change boot.superboot.img
to twrp-2.8.7.0-mojo.img. Of course you have to have the TWRP image as well to do this. This got me into TWRP, but the following issue still stands.
Okay, I can't seem to get Remix OS or the factory rom to install, CM12 installs fine though, anyone know how to fix this?
Side note:
I have a TWRP backup of my other MOJO but TWRP doesn't see anything when I choose restore, and I have tried choosing internal and SD card for the source to no avail, does anyone know how to get around that? Or is this just a current issue with this version of TWRP on the MOJO?
Please help need mojo stock rom
Hello all some reason my stock rom didn't back up and I've lost it please if anyone can help I need the stock rom for madcatz mojo thank you
konser13 said:
Hello all some reason my stock rom didn't back up and I've lost it please if anyone can help I need the stock rom for madcatz mojo thank you
Click to expand...
Click to collapse
Me too
Sent from my LG-H815 using Tapatalk
Their is a way to get it back to stock
To 1eyedmonster I had left information but I will explain how to do this if you can use ( Firefox internet browser ) you can download the stock frameware from madcatz site where you can find stock 4.2.2 for the m.o.j.o. link to original thread http://forum.xda-developers.com/mad...refox-to-download-madcatz-mojo-4-2-2-t3431587
imseanross1 said:
Is there a keyboard sequence to get into recovery? I have bricked my MOJO because I failed to realize that it failed to flash the stock firmware after I wiped it.
(EDIT) I found a solution to the above!
Okay so the method I used to get into recovery is to use the MoDaCo root tool and edit the superboot-windows.bat file and change boot.superboot.img
to twrp-2.8.7.0-mojo.img. Of course you have to have the TWRP image as well to do this. This got me into TWRP, but the following issue still stands.
Okay, I can't seem to get Remix OS or the factory rom to install, CM12 installs fine though, anyone know how to fix this?
Side note:
I have a TWRP backup of my other MOJO but TWRP doesn't see anything when I choose restore, and I have tried choosing internal and SD card for the source to no avail, does anyone know how to get around that? Or is this just a current issue with this version of TWRP on the MOJO?
Click to expand...
Click to collapse
If you still have issues entering recovery install terminal emulator from play store
Make sure usb debugging enabled in developer options
Then open terminal emulator and enter following commmnds you will need a keyboard for this Then follow these steps
Adb devices (enter)
Adb reboot recovery (enter)
Then you should be in twrp
As a bog standard user I naively assumed that I could put apps on my SD card as and when I wanted. Instead the majority refuse to be put there or cause problems.
If I root my Samsung J500fn (Marshmallow) will I be able to chose the location for putting apps? Can I get rid totally of the stuff Google/Samsung think I need but I never use? Can I make better use of my SD card that is practically empty? Are there any drawbacks to keeping Marshmallow as installed or would rooting overwrite it? Is there a better way than to root? Is "One Click root" safe to use? Am I better of using various programs like Odin, TWRP etc. mentioned in various threads here?
Thanks to any and all who can answer my questions. :fingers-crossed:
Anne
webelan said:
As a bog standard user I naively assumed that I could put apps on my SD card as and when I wanted. Instead the majority refuse to be put there or cause problems.
If I root my Samsung J500fn (Marshmallow) will I be able to chose the location for putting apps? Can I get rid totally of the stuff Google/Samsung think I need but I never use? Can I make better use of my SD card that is practically empty? Are there any drawbacks to keeping Marshmallow as installed or would rooting overwrite it? Is there a better way than to root? Is "One Click root" safe to use? Am I better of using various programs like Odin, TWRP etc. mentioned in various threads here?
Thanks to any and all who can answer my questions. :fingers-crossed:
Anne
Click to expand...
Click to collapse
Hi Anne,
We all have the same trouble with storage on our J5.
If you chose to root your phone then yes you will be able to uninstall alot of the bloat ware that is on your phone.
You will also have the option of using adaptable storage.
There are lots of threads on here that will guide you through the process. Just make sure that you read the guides properly and download and install the CORRECT zips.
I don't know if the one click root is safe to use.
I would advice installing TWRP and then flashing super su. Again all of the guides are on here.
If you do install TWRP via Odin then you will have the option of flashing custom ROMs..
Have a good look at the guides. Ask all the questions that you need to. People in here will be happy to help.
It's really nice to see you on here
Have fun
John
Don't need root for adoptable storage.
Hi
Did u get the info that you need ?
Rooting
johnhux7 said:
Hi
Did u get the info that you need ?
Click to expand...
Click to collapse
Hi again, thanks for asking.
I downloaded TWRP from https://www.androidfilehost.com/?w=files&flid=55922, version for SM-J500FN dated May 6, 2016. Also ODIN-v3.10.7 and SU SR4-SuperSU-v2.78-SR4-20161115184928 as well as the Samsung USB drivers. All check sums were fine. Odin 3 installed fine on my PC. I used Odin 3 to install the TWRP on my phone. However, when I try to go into Volume up - home - power on - I get a screen that does not resemble at all what I thought TWRP should look like.
I get the yellow/green Android thingy which says "installing system update" follows by "no command" followed by a screen which says:
Android Recovery
MMB29M.J500FNXXU1BPH1
samsung/j5nltexx/j5nlte
6.0.1/MMB29M/J500FNXXU1BPH1
user/release-keys
Use volume up/down and power. (all in yellow)
Followed by a menu which includes "apply update from SD card" but which doesn't install the SU zip file that I put in the download section of the SD card.
--------
So I am a bit lost and bewildered. Is the menu correct for TWRP? I haven't seen anything on the web or in YouTube that looks at all like what I'm getting. Did TWRP install properly - Odin 3 seemed to think so, but I'm beginning to wonder.
Any help, comment appreciated.
Anne
webelan said:
Hi again, thanks for asking.
I downloaded TWRP from https://www.androidfilehost.com/?w=files&flid=55922, version for SM-J500FN dated May 6, 2016. Also ODIN-v3.10.7 and SU SR4-SuperSU-v2.78-SR4-20161115184928 as well as the Samsung USB drivers. All check sums were fine. Odin 3 installed fine on my PC. I used Odin 3 to install the TWRP on my phone. However, when I try to go into Volume up - home - power on - I get a screen that does not resemble at all what I thought TWRP should look like.
I get the yellow/green Android thingy which says "installing system update" follows by "no command" followed by a screen which says:
Android Recovery
MMB29M.J500FNXXU1BPH1
samsung/j5nltexx/j5nlte
6.0.1/MMB29M/J500FNXXU1BPH1
user/release-keys
Use volume up/down and power. (all in yellow)
Followed by a menu which includes "apply update from SD card" but which doesn't install the SU zip file that I put in the download section of the SD card.
--------
So I am a bit lost and bewildered. Is the menu correct for TWRP? I haven't seen anything on the web or in YouTube that looks at all like what I'm getting. Did TWRP install properly - Odin 3 seemed to think so, but I'm beginning to wonder.
Any help, comment appreciated.
Anne
Click to expand...
Click to collapse
If your phone is looking like that then you have the wrong version of TWRP for the version of android that your using.
I did the same thing.
I hadn't got the time at the mo to find you the correct version but that is the problem for sure.
You want the one by Garnesh Varma which if on the Roms & kernels thread
John
johnhux7 said:
If your phone is looking like that then you have the wrong version of TWRP for the version of android that your using.
I did the same thing.
I hadn't got the time at the mo to find you the correct version but that is the problem for sure.
You want the one by Garnesh Varma which if on the Roms & kernels thread
John
Click to expand...
Click to collapse
Hi john,
Following your suggestion I downloaded the TWRP version http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960 by searching for Garnesh Varma. It successfully installed, but the problem remains the same. I do not get the TWRP recovery page just the same as before.
I shall continue to look to see if I can find another version from Garnesh, although it seemed correct ie SM-J500FN Android version 6.0.1 Build number MMB29M.J500FNXXU1BPH1, security patch level 1 August 2016.
Will let you know how I get on.
Thanks again,
Anne
webelan said:
Hi john,
Following your suggestion I downloaded the TWRP version http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960 by searching for Garnesh Varma. It successfully installed, but the problem remains the same. I do not get the TWRP recovery page just the same as before.
I shall continue to look to see if I can find another version from Garnesh, although it seemed correct ie SM-J500FN Android version 6.0.1 Build number MMB29M.J500FNXXU1BPH1, security patch level 1 August 2016.
Will let you know how I get on.
Thanks again,
Anne
Click to expand...
Click to collapse
Ahah! The trick was to turn off the phone and not to permit ODIN to do a reboot. I didn't know how to turn off so I pulled the battery. Then went into volume up - home - power on and got the correct menu. Whew. Rooted now according to root checker. Now to get some of the stuff off the phone and make some space.#
Thanks for your help,
Anne
webelan said:
Ahah! The trick was to turn off the phone and not to permit ODIN to do a reboot. I didn't know how to turn off so I pulled the battery. Then went into volume up - home - power on and got the correct menu. Whew. Rooted now according to root checker. Now to get some of the stuff off the phone and make some space.#
Thanks for your help,
Anne
Click to expand...
Click to collapse
Nice one. I'm pleased that you got it sorted !
Next you will be on the custom roms ! If you need any help just shout !
John
@webelan
Hello Anne!
Once you are rooted you can remove any Google/Samsung app. But removing some system apps can lead to bootloop. You can recover from bootloop by re-flashing stock rom.
I can make a flashable zip which removes unnecessary system apps, including the Google/Samsung apps which you want (you flash the zip in recovery and you're done). So let me know which Google/Samsung apps you wanna remove.
You can find some more basic informations in our Q&A thread: http://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-qa-thread-galaxy-j5-series-t3382922 .
I recommend you to try cm 12.1 (5.1.1 lollipop) by Nick Verse if you don't care about Samsung Camera, Memo and Browser. I use Open Camera, Color Note and Dolphin Browser (has sound/brightness sliders in videos) as alternatives. Unlike Touchwiz, CM 12.1 is faster than Touchwiz and has more free ram. But latest release has a bug (random reboot reported by users) which can be fixed manually. I'm running latest release without any problem.
Have a nice day!
Robert.
PS: You have a nice name
more woe
johnhux7 said:
Nice one. I'm pleased that you got it sorted !
Next you will be on the custom roms ! If you need any help just shout !
John
Click to expand...
Click to collapse
Don't know if I should start another thread but...
I used Aps2SD to create a second partition on my phone after making a backup of the SD card using that program. Restored the SD card and then I linked various apps to the new partition. When everything was done, and working, I used the option "Broken ap cleaner" just in case there were any residue files with "select all"
My error may have been to do a hard shutdown afterwards because now I get "Android System There's an internal problem with your device, and it may be unstable until you factory data reset." Then several aps, including a Google app, Photos, CM security and Gmail stop, in fact all those that run automatically at startup. Gmail and Google are on the internal drive now but were previously linked; CM is on the external partition still. The first thing after that I noticed after the hard shut down was that the icons for linked aps had disappeared and the aps keep stopping if I try to run them.
I read the Aps2SD FAQ and followed the two suggestions regard SU, ie "enable su at boot" and disabled "namespace separation" option.
Any suggestions? Should I
(a) do a "factory data reset"
(b) wipe the SD card and partition and completely reinstall the aps I want? Although if Google app is not working don't know if it can be reinstalled as I'm not sure which oneis meant.
(c) Bite the bullet and install a custom rom?
(d) something else?
Any help as usual very much appreciated,
Anne
webelan said:
Don't know if I should start another thread but...
I used Aps2SD to create a second partition on my phone after making a backup of the SD card using that program. Restored the SD card and then I linked various apps to the new partition. When everything was done, and working, I used the option "Broken ap cleaner" just in case there were any residue files with "select all"
My error may have been to do a hard shutdown afterwards because now I get "Android System There's an internal problem with your device, and it may be unstable until you factory data reset." Then several aps, including a Google app, Photos, CM security and Gmail stop, in fact all those that run automatically at startup. Gmail and Google are on the internal drive now but were previously linked; CM is on the external partition still. The first thing after that I noticed after the hard shut down was that the icons for linked aps had disappeared and the aps keep stopping if I try to run them.
I read the Aps2SD FAQ and followed the two suggestions regard SU, ie "enable su at boot" and disabled "namespace separation" option.
Any suggestions? Should I
(a) do a "factory data reset"
(b) wipe the SD card and partition and completely reinstall the aps I want? Although if Google app is not working don't know if it can be reinstalled as I'm not sure which oneis meant.
(c) Bite the bullet and install a custom rom?
(d) something else?
Any help as usual very much appreciated,
Anne
Click to expand...
Click to collapse
It sounds like the app has been corrupted, don't really know how to best advice you.
It sounds like you have to do s factory reset.
I would install a custom ROM.
The only trouble with this is that all the roms have just been shut down so you will have trouble downloading any.
Why model do you have ?
If you want to use a custom ROM pm me and I will send you a link.
The custom roms are much better (in my opinion )
John
Sent from my j5nltexx using XDA Labs
#Henkate said:
@webelan
Hello Anne!
Once you are rooted you can remove any Google/Samsung app. But removing some system apps can lead to bootloop. You can recover from bootloop by re-flashing stock rom.
I can make a flashable zip which removes unnecessary system apps, including the Google/Samsung apps which you want (you flash the zip in recovery and you're done). So let me know which Google/Samsung apps you wanna remove.
You can find some more basic informations in our Q&A thread: http://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-qa-thread-galaxy-j5-series-t3382922 .
I recommend you to try cm 12.1 (5.1.1 lollipop) by Nick Verse if you don't care about Samsung Camera, Memo and Browser. I use Open Camera, Color Note and Dolphin Browser (has sound/brightness sliders in videos) as alternatives. Unlike Touchwiz, CM 12.1 is faster than Touchwiz and has more free ram. But latest release has a bug (random reboot reported by users) which can be fixed manually. I'm running latest release without any problem.
Have a nice day!
Robert.
PS: You have a nice name
Click to expand...
Click to collapse
Hi Robert,
Thanks for the offer. So far I have not deleted anything but have used software to partition my SD card and to move stuff out of internal memory onto it - or rather link it. I managed to mess up a bit but seem to have recovered - or at least got a phone with items I want to use. Next week when I've more time I'm hoping to install a Custom ROM. In the meantime I've spent what little time available trying to read as much as I can so that when I do put a Custom ROM on, it goes right first time.
Best wishes,
Anne
webelan said:
Hi Robert,
Thanks for the offer. So far I have not deleted anything but have used software to partition my SD card and to move stuff out of internal memory onto it - or rather link it. I managed to mess up a bit but seem to have recovered - or at least got a phone with items I want to use. Next week when I've more time I'm hoping to install a Custom ROM. In the meantime I've spent what little time available trying to read as much as I can so that when I do put a Custom ROM on, it goes right first time.
Best wishes,
Anne
Click to expand...
Click to collapse
Hi Anne!
Note that once you flash TWRP, Knox will become 0x1 (initially is 0x0) which means that you void the warranty. In my opinion, I don't care about the warranty because I prefer to have a better experience with my phone. I cannot live without root after I rooted a phone for first time
Regarding the ROM, if you wanna try cm12.1 (which I recommend it, best ROM which is closest to AOSP and never lagged) I'll recommend you to wait some more time because I'll download CM 12.1 sources and build a new update with the help of Nick Verse . He doesn't have enough space on his PC to have both cm12 & cm13 sources. I'm currently trying to extend my Linux partition to have enough space to build though. Is needed about 80gb in total average and I have about 20 and can't resize my partition. I might try to reinstall Linux.
If you have any other question, feel free to ask here (new thread if it's related to something else) or PM me.
Have a nice day!
Robert.
Having a similar issue, i have got my phone so it boots to TWRP 3.1.1-0 but cannot find a ROM file that will install, they all seem to be for j5nlte, even if the file name states j5nltexx. I have tried to ammend/remove the assert lines in the install package to no avail...
any advice would be good
Thanks in advance
PB
ashyx said:
Don't need root for adoptable storage.
Click to expand...
Click to collapse
Then what to do
#Henkate said:
Hi Anne!
Note that once you flash TWRP, Knox will become 0x1 (initially is 0x0) which means that you void the warranty. In my opinion, I don't care about the warranty because I prefer to have a better experience with my phone. I cannot live without root after I rooted a phone for first time
Regarding the ROM, if you wanna try cm12.1 (which I recommend it, best ROM which is closest to AOSP and never lagged) I'll recommend you to wait some more time because I'll download CM 12.1 sources and build a new update with the help of Nick Verse . He doesn't have enough space on his PC to have both cm12 & cm13 sources. I'm currently trying to extend my Linux partition to have enough space to build though. Is needed about 80gb in total average and I have about 20 and can't resize my partition. I might try to reinstall Linux.
If you have any other question, feel free to ask here (new thread if it's related to something else) or PM me.
Have a nice day!
Robert.
Click to expand...
Click to collapse
Please work on camera that is the only thing cm 12.1 lackss thank youu
So the whole reason I rooted this damn phone was to be able to install working stock apps. Not just the Music and Gallery apps either--ALL THE LG APPS. Which LS997-compatible 100%-working ROM can I flash and get them all, if any? I keep hearing one exists, but no one bothers sharing that info and when I search I find nothing.
Really? No one?
bgibson72 said:
Really? No one?
Click to expand...
Click to collapse
Look in the development section it's like the 5th one down has ls997 in the title
@bgibson72
Im the only person developing a STOCK LS997 rom currently.. It contains the LG base apps and all the removed ones that we didnt get shipped with out model . Includes a ton of extras as well, alternatively we have 3 or 4 aosp roms you can use, but make sure you use twrp and backup your efs before flashing as it tends to jumble your programming up and cause issues. Otherwise you can flash the stock rom the Dev who provided the dirty santa unlock method.
Theres a good bit of info here to locate everything you need to have a awesome experience with the LG V20!
My link
https://forum.xda-developers.com/v20/development/rom-ls997-stock-debloated-su-goodies-t3531923
READ THE ENTIRE FIRST 3 POSTS!!! A LOT OF TIME WENT INTO THIS TO CLEAR UP ANY CONFUSION!
I also itemized a list of 15 or so mods and add-ons that we can use to increase our enjoyment with perspective links to their home locations and the devs that built and maintain them.
jerrycoffman45 said:
Look in the development section it's like the 5th one down has ls997 in the title
Click to expand...
Click to collapse
This one?
{ROMS}[LS997] Stock-ish Magisk+3minit+ModControl 3/10/17
Other than DirtySanta, this is the only other one with LS997 in the title on that page. I'll give it a shot, and thanks for answering.
Team DevDigitel said:
@bgibson72
Im the only person developing a STOCK LS997 rom currently.. It contains the LG base apps and all the removed ones that we didnt get shipped with out model . Includes a ton of extras as well, alternatively we have 3 or 4 aosp roms you can use, but make sure you use twrp and backup your efs before flashing as it tends to jumble your programming up and cause issues. Otherwise you can flash the stock rom the Dev who provided the dirty santa unlock method.
Theres a good bit of info here to locate everything you need to have a awesome experience with the LG V20!
My link
https://forum.xda-developers.com/v20/development/rom-ls997-stock-debloated-su-goodies-t3531923
READ THE ENTIRE FIRST 3 POSTS!!! A LOT OF TIME WENT INTO THIS TO CLEAR UP ANY CONFUSION!
I also itemized a list of 15 or so mods and add-ons that we can use to increase our enjoyment with perspective links to their home locations and the devs that built and maintain them.
Click to expand...
Click to collapse
Hey thanks--I was fairly sure this was the ROM in question. Thank you for providing this! I was hesitant to flash because I'm always a little skeptical about the amount of help I'll get should I get stuck. I'm not exactly a noob at this, but I have plenty to learn. It looks like you've done a lot of work to provide a positive experience, so I'll give it a shot and see how it goes. I promise to read and re-read the instructions on the first 3 posts, and to NOT bother you with questions that have already been addressed in the thread. . Thanks!!
bgibson72 said:
Hey thanks--I was fairly sure this was the ROM in question. Thank you for providing this! I was hesitant to flash because I'm always a little skeptical about the amount of help I'll get should I get stuck. I'm not exactly a noob at this, but I have plenty to learn. It looks like you've done a lot of work to provide a positive experience, so I'll give it a shot and see how it goes. I promise to read and re-read the instructions on the first 3 posts, and to NOT bother you with questions that have already been addressed in the thread. . Thanks!!
Click to expand...
Click to collapse
if you made it through dirty santa the rest should be cake. 99% of the issues i covered for people were
after going to AOSP and not having a backup of their programing info in their efs and having to find a way to
manually go in and fix each fd up piece.
The other is being on older software and downloading a OTA and rebooting with it in your internal storage.
This one causes a endless boot loop into twrp, so be advised to delete the update if your on older software or be prepared to
hit my post # 3 for fixes and be near a pc as you need to fastboot erase the fota and misc directories to resolve the boot loop. A twrp wipe will not fix it and restores etc wont either lol.
Otherwise theres now a lil over 100 pages of chatting and troubleshooting, fixes and things that have gone on, and mostly its all outdated as ive provided the fixes for 99% of everything in the latest version 7.5
Just be prepared to take 15-20 minutes for the phone to boot up the 1st time. My rom is deodexed, and the 1st boot is doing 298 things before you get to the optimization part. There is not boot animations as the phone will always have the static screen issue on reboots so i went ahead a placed a disabled command there to just save time/batt life. The setup wizard is stripped and only there to give you the notice its done booting and time to get to playing around.
Magisk is kinda finicy being its systemless design. It takes some time to get used to it, and be aware that some older apps that dont support exotic root or systemless root may not request root and not fully work. Titanium backup is one i know is getting attacked by googles app scanning and needs to have that turned off before it will work, most of my apps have a option to set "force root" so it asks for a root request regardless if it understands MagiskSu's root methods.
just some food for thought. Hope everything goes well, and there is a ton of people on the forum here that have great knowlege and can help with troubleshooting issues you may have
Team DevDigitel said:
if you made it through dirty santa the rest should be cake. 99% of the issues i covered for people were
after going to AOSP and not having a backup of their programing info in their efs and having to find a way to
manually go in and fix each fd up piece.
Click to expand...
Click to collapse
Yeah, I didn't have many problems there, although I did get stuck in the TWRP loop once.
The other is being on older software and downloading a OTA and rebooting with it in your internal storage.
This one causes a endless boot loop into twrp, so be advised to delete the update if your on older software or be prepared to
hit my post # 3 for fixes and be near a pc as you need to fastboot erase the fota and misc directories to resolve the boot loop. A twrp wipe will not fix it and restores etc wont either lol.
Click to expand...
Click to collapse
I am on the ZV3 version of the software. I do have the ZV5 update in my cache folder--are you saying it's a good idea to delete the update.zip file?
Otherwise theres now a lil over 100 pages of chatting and troubleshooting, fixes and things that have gone on, and mostly its all outdated as ive provided the fixes for 99% of everything in the latest version 7.5
Click to expand...
Click to collapse
That's what I like to hear! :good:
Just be prepared to take 15-20 minutes for the phone to boot up the 1st time. My rom is deodexed, and the 1st boot is doing 298 things before you get to the optimization part. There is not boot animations as the phone will always have the static screen issue on reboots so i went ahead a placed a disabled command there to just save time/batt life. The setup wizard is stripped and only there to give you the notice its done booting and time to get to playing around.
Click to expand...
Click to collapse
Appreciate the heads up. Familiar with the long boot process from DS, lol.
Magisk is kinda finicy being its systemless design. It takes some time to get used to it, and be aware that some older apps that dont support exotic root or systemless root may not request root and not fully work. Titanium backup is one i know is getting attacked by googles app scanning and needs to have that turned off before it will work, most of my apps have a option to set "force root" so it asks for a root request regardless if it understands MagiskSu's root methods.
Click to expand...
Click to collapse
Magisk is a new animal for me, as I've had zero experience with it. I do have Titanium Backup installed, so I'll make a mental note on that.
just some food for thought. Hope everything goes well, and there is a ton of people on the forum here that have great knowlege and can help with troubleshooting issues you may have
Click to expand...
Click to collapse
Thanks again--I appreciate your hard work and dedication to this!
bgibson72 said:
Yeah, I didn't have many problems there, although I did get stuck in the TWRP loop once.
I am on the ZV3 version of the software. I do have the ZV5 update in my cache folder--are you saying it's a good idea to delete the update.zip file?
YES, dont boot into twrp until you remove it, or its back into the twrp loop you go hehe
Click to expand...
Click to collapse
Team DevDigitel said:
bgibson72 said:
Yeah, I didn't have many problems there, although I did get stuck in the TWRP loop once.
I am on the ZV3 version of the software. I do have the ZV5 update in my cache folder--are you saying it's a good idea to delete the update.zip file?
YES, dont boot into twrp until you remove it, or its back into the twrp loop you go hehe
Click to expand...
Click to collapse
Weeeeeeeeeeeeee!!!
Will do!
Click to expand...
Click to collapse