Related
First, I searched and read all relevant threads concerning this issue. The five threads that showed up in the search did not help me solve my issue.
So on to my problem. I can no longer flash any rom onto my device. I attempted to flash the first official CM10 nightly (which I recently found out was not flashing properly for others) and had no success. I simply got a black screen and nothing more. I eventually got back into TWRP (v2.2.1.4) to try and Nandroid restore, but I noticed that /data was not formatting and the restore failed. Every time I would slide the bar across to confirm the restore TWRP would reboot itself. I then flashed CWM (v6.0.1.0) and the same problems were there. After that I flashed an earlier version of TWRP and successfully restored the backup. I'm not 100% sure how it was successful. So I decided to try flashing another ROM and no go. Same problems. Anyone have any ideas? When I was using CWM I got the error message below.
Code:
E: unable to locate volume information
E: unable to open ums lunfile '/sys/devices/platform/usb_mass_storage/lun0/file'
E: unable to format data
I'm running Bugless Beast with Motley #219
I'm having similar, if not identical problems. After flashing TWRP 2.2.1.4, I tried flashing a rom and gapps; the tablet would boot endlessly into recovery. Nothing I did would do anything, so I flashed the stock image to start over. This time, I used CWM 6.0.1.0 touch to make sure that it wasn't the recovery that was causing the problem. However, now after flashing the rom and gapps, instead of booting into recovery, I got stuck at a black screen and had to hold the power button in order to get back to the bootloader.
Now, like you, it seems I can't flash any roms anymore. It's frustrating to say the least.
Sent from my Galaxy Nexus using xda app-developers app
aznxk3vi17 said:
I'm having similar, if not identical problems. After flashing TWRP 2.2.1.4, I tried flashing a rom and gapps; the tablet would boot endlessly into recovery. Nothing I did would do anything, so I flashed the stock image to start over. This time, I used CWM 6.0.1.0 touch to make sure that it wasn't the recovery that was causing the problem. However, now after flashing the rom and gapps, instead of booting into recovery, I got stuck at a black screen and had to hold the power button in order to get back to the bootloader.
Now, like you, it seems I can't flash any roms anymore. It's frustrating to say the least.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
What rom did you attempt to flash?
elementur said:
What rom did you attempt to flash?
Click to expand...
Click to collapse
So do I.I attempted to flash the first official CM10 8.18 nightly and had no success. I just got a black screen.Even more I boot into bootloader and choose to boot into recover but just stay at google logo.I try to flash recover once more,but just can't boot into recover!!
I have the same problem, i flashed the cm10 nightly which I learned would not boot. No I have no backup to boot to, and cannot even push a new rom to the storage to try to install.
Shano56 said:
I have the same problem, i flashed the cm10 nightly which I learned would not boot. No I have no backup to boot to, and cannot even push a new rom to the storage to try to install.
Click to expand...
Click to collapse
Can't boot into recover,does anyone know what is wrong?When it is in android I can use APM boot into recover or via ADB,but unusually when it is in the bootloader I choose to boot into recover,it just stay at google logo!!What it is going wrong?
phiracle said:
Can't boot into recover,does anyone know what is wrong?When it is in android I can use APM boot into recover or via ADB,but unusually when it is in the bootloader I choose to boot into recover,it just stay at google logo!!What it is going wrong?
Click to expand...
Click to collapse
There is a bug with the Nexus 7 where you cannot access the recovery through the bootloader. To fix this, boot up into the bootloader on your nexus 7 and, without doing anything, plug it into the computer you used for rooting it and then select the option Restart bootloader and press the power button. Once it gets you back into the bootloader again select Recovery mode and press the power button. It will now get you into the recovery and once you're in recovery you can unplug your tablet from the computer. Note that this fix is not permanent and you will have to do this every time you wish to access your recovery via the bootloader (and this problem is not relevant to the OP's problem).
android1234567 said:
There is a bug with the Nexus 7 where you cannot access the recovery through the bootloader. To fix this, boot up into the bootloader on your nexus 7 and, without doing anything, plug it into the computer you used for rooting it and then select the option Restart bootloader and press the power button. Once it gets you back into the bootloader again select Recovery mode and press the power button. It will now get you into the recovery and once you're in recovery you can unplug your tablet from the computer. Note that this fix is not permanent and you will have to do this every time you wish to access your recovery via the bootloader (and this problem is not relevant to the OP's problem).
Click to expand...
Click to collapse
Thank You Very Much!!!
I am having much the same problem as the OP. I finally rooted my Nexus 7 using WugFresh's Nexus Root Toolkit. It seemed all went well. I chose to use TWRP in a first attempt to install a ROM (I was on rooted stock), and following the instructions for installing my chosen ROM I went into it to wipe cache, Dalvic Cache and data. Both cache and dalvic cache wiped without issue, but when I attempted to wipe /data TWRP simply reported that it failed. With that failing, I did not attempt to install a rom. I was still able to boot out of recovery, but even with repeated attempts wiping data always failed. Is any one aware of any solution or have any suggestions. Thank you!
I have to think I'm not the first to be in this situation but my searches didn't turn up anything that looked familiar.
I rooted the stock phone and installed TWRP 2.6xx a month or two ago with no issues. Everything's been running great and I decided it was time to make another backup using TWRP.
After a successful backup I wiped dalvik and cache out of habit and went to reboot -- TWRP said I was not rooted and wanted to know if I wanted to install SuperSU? This question was unexpected since I'd been rooted for a long time, and I decided to just say yes. The phone rebooted and stopped at the Samsung Galaxy S4 boot screen. I did up-volume reboot to recovery, but it seemed to hang at the TWRP blue screen -- I later discovered it will eventually get to the menu after a minute or two of the blue screen. I tried wiping cache and dalvik again and rebooting -- every time I try to reboot now it asks if I want to install SuperSU -- whether I say yes or no seems to make no difference -- I've tried both several times. Every time it hangs at the Samsung boot screen, or it takes forever to get to TWRP if I'm booting to recovery.
I've tried wiping cache, dalvik and data with no improvement. I finally tried formatting data, but again no improvement. I also tried restoring my backup several times and wiping cache and dalvik but still stuck.
I prior to today's problems I'd used TWRP a number of times and I don't recall it asking the SuperSU question, so I am thinking that is the key to this problem, and I'm wondering if anyone knows what it means?
You need to go to 2502 twrp, 26+ has hanging problems and possible Partition issues, also what rom are you on? Do you need to flash super su along with the rom /gapps?
Here's the twrp forum for us SPH-L720
The last page has a download link for the most stable build for us good luck!
http://forum.xda-developers.com/showthread.php?t=2262999
I'm running what came on the phone, just unlocked, rooted, and installed TWRP.
I ran CM10.1 on my previous phone and currently on my tablet, but my impression from running it previously is CM is a downgrade in voicemail functionality (you get these annoying text messages and have to call the voicemail), and I'm assuming it doesn't support the special GS4 hardware features like being able to hover your finger.
OK I installed TWRP 2502 and it now boots to recovery normally. However, it still asks me before rebooting if I want to install SuperSU, and it hangs on the Samsung boot screen.
Nerva said:
OK I installed TWRP 2502 and it now boots to recovery normally. However, it still asks me before rebooting if I want to install SuperSU, and it hangs on the Samsung boot screen.
Click to expand...
Click to collapse
How did you root? CF auto root also installs SuperSU
Do you have a back up from when you were rooted? IF twrp keeps giving you problems, use cwm, are you able to get past the Samsung boot..
Yeah that's what I did back when I rooted it months ago. I tried running CF auto root again today and it didn't work, so I ran it from Odin and it did work that time, but there was no change -- still hangs on the Samsung boot screen, although now I'm back to the stock recovery. So I tried installing the stock MF9 firmware from Odin -- still hangs on the boot screen. I don't know what to do at this point...
After mf9 install avd stock recovery did you factory reset
Yes, I did a factory reset -- followed the video instructions by qbking77. Still hangs on the boot screen.
Take out battery.. Put back in. Go to stock recovery, holding all 3 buttons volume up factory reset.. If you used odin abd flashed mf9 it should fix you?
---------- Post added at 06:02 PM ---------- Previous post was at 05:54 PM ----------
Well I guess I tried man, someone who has more knowledge should chime in now
---------- Post added at 06:05 PM ---------- Previous post was at 06:02 PM ----------
This
http://forum.xda-developers.com/showthread.php?t=2400192
Im also stucked with the same problem!! After flashing my rom succesfully it just ask ur device is not rooted swipe to install!! I tried all the posiblities!! but i stuck with the boot image!! pls help me!!
From experience it sounds like you should head over to sammobile and Odin back to stock and start fresh.
1. Odin to stock
2. Root phone
3. Put desired recovery
4. Flash ROM (be sure to read dev install instructions some require reboot of recovery after wipe)
5.try to restore backup (best if you flash ROM that is backup then restore backup)
6.if you went into nae or ng2 you cannot downgrade to me
7.google has many solutions
Sent from my SCH-I545 using XDA Free mobile app
Sorry for necro, but did anyone figure out a solution to this? This just happened to me.
Just Reflash it
We have the same issue, tried to install supersu binary, after installing through twrp recover, my phone went bootloop, as i've tried to search the internet, the issue doesn't fix by by most of the users unless they reflash their device. though its a bit hassle starting from zero, but atleast, you got ur device back
This helps me:
1. Run Odin on your computer and, after entering download mode on your phone, establish a connection between your devices with the help of the USB cable.
2.Note: for download mode – power off your smartphone and then press and hold, at the same time, the Power, Volume Down and Home buttons.
3.Odin will try to recognize your device; if everything works as expected, on the program the “added” message will be displayed and the ID:COM field will be turned yellow, or blue. (Note: if that’s not happening, unplug the USB connection, close Odin, force restart your phone and reinstall the USB drivers on your computer before retrying the steps from above)
4.From the program click on the “PA” button and load the custom recovery image; don’t check Re Partition and Auto Reboot options.
5.When done, click on “start” and wait while TWRP recovery is being added on your phone
6.In the end, Odin will display the “pass” message and the ID:COM filed will be turned green (or other color) with message - RESTART; you can then remove the USB cord and reboot your smartphone.
I have had this prob on a few things , if you have a backup,flash any mod that will go to the device will do then run the backup and reflash should work .and if you have twrp try to reformat all but the system and see if that helps.
Good luck.
Hi to everyone.
Today, I installed the TWRP and the ROM and both were installed correctly on a Le Pro3 X722. The problem started when the Google services were updating. Suddenly, the phone restarted and entered in a bootloop. I was not even able to enter the TWRP. The page freeze on LE-Recovery logo and then crashed (fill full of lines). I disconnected the battery for a while and then, I was able to enter the TWRP for 2 time but recovery crashes in few seconds. I wanted to wipe and install a clean rom but I cannot enter TWRP anymore.
Please, Is there someone that could help me?
Thank you very much in advance
PS. My phone is not recognized via ADB. I tried with the AIO Tool but my device is not detected.
Hi, I followed the whole process for Qfil explained here:
Leeco Le Pro3 x720 Hard Brick
So the phone was running lineageos 15.1 nightly from 22.08 which i guess was kind of really unstable (even opening twitter in the morning could turn off the device. It could be turned back on right away though), xposed framework v90 w/yt...
forum.xda-developers.com
Installation was correct but nothing change in my phone:
- same start page and bootloop
- Same problem trying to access the recovery.
Now, i can connect via fastboot and I would like to install a fastboot rom (preferable EUI stock 20) but I cannot find one. All links are dead.
Thank you very much in advance
Hi,
I'm currently running CyanogenMod KitKat version with ClockWorkMod. Since the rom has several bugs and for the past few months they haven't published any updates to my Galaxy s4 I9505, I've decided to switch to WanamLite.
There I found out I need TWRP recovery so I went ahead and downloaded GooManager which installed an outdated version, as I've found out.
I tried wiping my internal storage as recommended but the recovery couldn't mount any of my partitions.
So now CyanogenMod won't boot. I know this issue is fixed in the updated version of TWRP but I'm not sure how to update it without the phone booting (Odin perhaps? It doesn't recognize it currently... Should I move to download mode for it to be detected?)
Anyways, I'm kind of stuck as of now. Any help would be very much appreciated!
Btw I have a question, what's the difference between using Odin 1.85 and 3.09? Why do people still use the old version?
Thanks in advance!!
Neta
Edit:
Alright, now I can't get into recovery either. When I try, I can see the Samsung logo and there's "recovery" written in the top left but then it just restarts again into the same logo without "recovery". I'm starting to lose my cool now. Anyone have any ideas?
Try flashing latest stock through download mode and see if it boots.
Sent from my GT-I9506 using Tapatalk
Flash this recovery through odin. It's TWRP 2.6.3.1. Worked alwys for me.:fingers-crossed:
https://db.tt/SwLvOrZl
Uncheck auto-reboot in Odin.
Thank guys
I got freaked out and just did everything I could to make the phone working again.
I found a thread on XDA explaining how to return your phone to stock version, so I followed it, rooted with auto root, (btw Odin didn't recognize my phone because I used the front usb... how annoying!), then flashed the latest TWRP (2.7.0.1, not 2.6.x.x as GooManager downloaded for me), then booted to recovery and flashed WanamLite.
Everything is working now!
Except one thing - I'm still not able to access recovery mode through physical buttons, only using boot apps. Is this a kernel issue?
Could be some incompatibility since CyanogenMod uses it's own kernel and CWM recovery.
The recovery itself is working fine, but when I try to access it using buttons it shows the Samsung logo with the recovery on the top left, and then reboots again to normal boot.
What do you think?
Thanks!
Ok, so I've been Resurrection_Remix_LP_v5.4.6-20150530-hlte.zip for quite some time now, probably since not long after it's release, and it pretty much liked it. Except for the occasional seemingly random "auto reset" of android/app settings and preference (such as forgetting all my saved wifi ssid) after a random crash/reboot.
Starting last week, the camera became problematic, often failing to start entirely (error message, "could not connect to to camera"), or could connect to the back camera, but freezes when i try to switch to front camera. I tried wiping data with TitBak and it worked again, but the problem comes back a while later. Is this a software or hardware problem?
Anyway, I finally decided to upgrade the the latest RR and wanted to upgrade TWRP from 2.8.5 as I go along. Since the existing version fits the requirement for TWRP install...
Code:
TWRP Install (Requires TWRP 2.8.4 or higher already installed):
Download the latest TWRP image file (.img) from the download link and boot TWRP. Go to install and find and select the Images... button. Browse to the image that you downloaded and select it. Choose recovery and swipe to flash.
... I went ahead and did it, with the standard 3 wipes (couple of times) and then the recovery flash. Turns out it didn't work and the phone just keeps freezing at the first screen with Note3 logo and the red/blue/yellow test at the top left saying booting to recovery. It never did!
I then tried to reflash the recovery using odin with the .tar file, it flashed fine and auto re-booted back into the launcher (everything's gone of course). But I still needed to go back into recovery mode to either flash a higher version of TWRP, or install the newer RR.
Still, it gets stuck and wont go to recovery no matter i used the hardware button method, or recovery button in the power menu, or adb reboot recovery.
What's wrong!?!??!
c'mon guys, give me something.
You have flashed newer RR how it goes back to older version after you odin twrp?. Or you mean currently it's the latest, just in the future you need to update to the newest?. Did you flashed the correct rom zip for your phone?. I mean hlte for n9005 and the rest for other variants. I haven't flash 'google like' roms for long not sure it's still different zip for each variants.
Sent from my SM-N920C
I haven't even got to the point of flashing the ROM so it's still on the old RR.
I need to know how to upgrade to the latest TWRP first.
Then why 3 wipes?. If you wipe system you have no rom in the phone.
Sent from my SM-N920C
I recently picked up my old note 3 and wanted to use it as a gps for my car, but when i tried to start it i noticed it still had some weird rom form a few years back installed. So i went to sammobile to grab the newest official rom and flashed it with odin. That is when the trouble started.
Odin stated that the flashing proces was successful but when it automatically rebooted i was given an unpleasant surprise.
My good old phone kept rebooting to the samsung galaxy note3 logo with the text the top left which stated: "recovery booting....".
My first instinct was that i had to go to the recovery to format cache and data, but the problem was that the recovery wasn't reachable.
So installed twrp 3.1.1.0 which I've used before, but still no luck after doing a factory wipe.
After all of this i've never been able to enter the stock recovery, even after again re-flashing the stock rom.
does anyone have an idea how to fix this.
Search multiple identical posts.
Suggest older 2.8 TWRP.
I inded find some older posts, but none of them discribe this problem. I tried to use twrp 2.8.7 amd that will give me a recovery to work with. But it still won't boot afterwords.
I can flash the older 4.4.3 firmware and it will boot with no problems. But when i try to update it with a newer version, it gets stuck again
Its probably a bootloader problem .
Phone Info from playstore and post bootlader etc.