My D802 is not recognized by pc but I tried all the possible causes port usb driver usb cable nothing works both the recovery is the download mode and yet I can not install anything because it is not recognized by pc
Related
hello,
i did wipe dalvik cache on my galaxy s i9000
and tryed to turn on the phone
the phone enterd into a boot loop,
i tried to enter to recovery mode but without success
so i tried to enter to download mode with success
so i tried to flash new rom with odin but the computer not detect usb...
someone can help me!?
thanks!
talzigi said:
hello,
i did wipe dalvik cache on my galaxy s i9000
and tryed to turn on the phone
the phone enterd into a boot loop,
i tried to enter to recovery mode but without success
so i tried to enter to download mode with success
so i tried to flash new rom with odin but the computer not detect usb...
someone can help me!?
thanks!
Click to expand...
Click to collapse
Do you have kies installed?
Firstly give some information about what Rom you are on
If you are on GB rom search for SGS USB driver. If you are on ICS rom search for Nexus USB driver. If you don't know which ROM was last install both drivers. You can find them on Samsung website. Or check my thread how I almost made a brick.
i have kies installed
and the rom is CM9
and what i need to install to try to get into recovery from the computer?
i have a windows 7 64 bit
you will need the nexus s usb drivers http://nexusshacks.com/nexus-s-hacks/how-to-install-nexus-s-windows-usb-drivers/
If you have lost recovery try flashing the semaphore .tar version in Odin, that usually fixes it
the drivers not helped....
i didnt get the usb not recognized message..
i am connecting the usb and nothing happend.
Make sure you r in usb storage mode,
I'll try to recollect the remedy:
-Uninstall or disable Kies.
-put phone in download mode.
-connect usb from phone direct to pc, Do NOT use unpowered usb hub.
-open windows device manager and update phone drivers browsing to folder of extracted Nexus S usb drivers.
-disconnect usb.
-restart pc.
-while pc boot up, ask yourself:
Why didn't I do research?
-start Odin
-load latest Semaphore_ICS_1.2.6.tar kernel in PHONE field. Uncheck repartition.
-put sgs in download mode.
-connect usb and flash.
Check cable. Go to other comp and look if there is response about installing driver.
As teh title says i am using v2.5.0.0 of this recovery rom for my samsung s4 device.
The issue is that i cannot mount my SD card whilst in recovery mode.
It never appears on my windows 8 machine when i connect my device in recovery mode.
I have all the usb drivers for my device installed and that is how i originally put a rom on it when i was running a stock rom.
Now that i did a wipe i obviously cannot mount my device on a normal running stock rom because its removed and i am trying to install a new one.
How can i access and transfer files whilst in recovery mode?
Do i need any additional drivers?
Still cant mount. i notice ond evide manager it says the drivers are missing for SAMSUNG_Android yet i have installed samsung kais!
jonneymendoza said:
As teh title says i am using v2.5.0.0 of this recovery rom for my samsung s4 device.
The issue is that i cannot mount my SD card whilst in recovery mode.
It never appears on my windows 8 machine when i connect my device in recovery mode.
I have all the usb drivers for my device installed and that is how i originally put a rom on it when i was running a stock rom.
Now that i did a wipe i obviously cannot mount my device on a normal running stock rom because its removed and i am trying to install a new one.
How can i access and transfer files whilst in recovery mode?
Do i need any additional drivers?
Click to expand...
Click to collapse
Uninstall KIES and any other samsung usb installed utilities first.
Then download the official Samsung USB drivers for windows here: http://developer.samsung.com/board/download.do?bdId=0000000700&attachId=0000000001
After all the uninstalls are done reboot computer and install the official samsung usb drivers.
Once that's done reboot computer one more time and then your phone should and will
recognize your phone unless you have a bad cable or a non-functioning usb port in computer.
Good luck!
Hi Friends!
I have lg l3 e400. It was working well before i flashed a custom rom. But after installing rom it is showing emergency mode when i switch it on. Neither it is connecting to the computer nor reboots in recovery mode. It stucks on emergency mode. Is there any way to connect it to pc or get out from this problem?
Please help....
Connect USB cable and try to flash it via KDZ TOOL(is it detecting phone).
i had that problem too
what i did?
i connected the phone via usb, and selected emergency on kdz and flashed it, you have to install the lg drivers first
i bought a LG D802 32gb last night as i was using a 16 gb before i wanted to flash cloudy g3.. so i tried to install custome recovery twrp...
now i am in fast boot mode..
it says :
[880]fastboot mode started
[910]udc_start()
when i attach usb cable
[1100]-reset-
[1110]-portchange-
[1120]-reset-
[1130]-portchange-
[1140]-fastboot: processing commands
i tried holding volume + and and attaching the usb cable but no luck ... so now i have NO RECOVERY, NO DOWNLOAD MODE, AND MY WINDOWS PICKING UP MY PHONE AS "USB MODEM PHONE ADB PORT"
please help :crying:
So when i put the phone in download mode, nothing happens.. it's like nothing is attached to the PC. No unrecognized device in device manager, nothing at all..!!
MTP is working fine, LG drivers are installed on PC too. USB OTG works while in recovery too.
I am on a Win 8.1 operating system. My phone has a custom rom and recovery. Blisspop v4.0.1 and TWRP v2.8.7.1 to be exact.
Anything that could fix this Download Mode issue? I really wanna flash the stock ROM. Or should i go ahead and flash the flashable zip of the stock kdz?
1. Try a different USB Port, USB Cable or PC/Laptop.
2. Uninstall Drivers ,download & install latest drivers if Verizon use the Verizon drivers. (If you were previously on Stock lillipop you really need to do this)
3. if none of above helps try the Custom Zip file...
Maybe try a different os?