OK so, i wanted to return it back to stock, used RSD Lite to flash SBF. Done that multiple time. All the phone does is the boot animation repeatedly till it dies. I've used this same SBF before, worked perfectly.
I cant factory reset the phone because the buttons are missing. Its been awhile since i messed around with this phone, maybe I'm missing something.
Did I permanently brick this phone?
@sd_shadow anything?
Josephdbrewer25 said:
OK so, i wanted to return it back to stock, used RSD Lite to flash SBF. Done that multiple time. All the phone does is the boot animation repeatedly till it dies. I've used this same SBF before, worked perfectly.
I cant factory reset the phone because the buttons are missing. Its been awhile since i messed around with this phone, maybe I'm missing something.
Did I permanently brick this phone?
@sd_shadow anything?
Click to expand...
Click to collapse
Factory reset is the fix, is flash was good.
No other way way to get to recovery with out volume buttons
Sent from my XT907 using Tapatalk
sd_shadow said:
Factory reset is the fix, is flash was good.
No other way way to get to recovery with out volume buttons
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Awe man. I don't get it though, I never had to do it before. Oh well, I'll replace the ribbon soon. Hopefully it will be fixed then. Thanks! :good:
Josephdbrewer25 said:
Awe man. I don't get it though, I never had to do it before. Oh well, I'll replace the ribbon soon. Hopefully it will be fixed then. Thanks! :good:
Click to expand...
Click to collapse
You were lucky before then.
Sent from my XT907 using Tapatalk
sd_shadow said:
You were lucky before then.
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
I still don't get it, when flashing SBF, all my data was gone. Why would a reset need to be done?
Josephdbrewer25 said:
I still don't get it, when flashing SBF, all my data was gone. Why would a reset need to be done?
Click to expand...
Click to collapse
Flashing should not wipe data
Sent from my XT907 using Tapatalk
sd_shadow said:
Flashing should not wipe data
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Every time I've used RSD Lite to flash SBF, it erased everything. Even the Droid 1 and 3 it did that. Except on the droid 3 it erased both the data and internal SD.
Josephdbrewer25 said:
Every time I've used RSD Lite to flash SBF, it erased everything. Even the Droid 1 and 3 it did that. Except on the droid 3 it erased both the data and internal SD.
Click to expand...
Click to collapse
I think it depends on the version of RSD Lite and settings.
I've flashed d2, d2g, dx, dx2, d3, d4...
Without data wiped, from Flashing with RSD Lite.
Sent from my XT907 using Tapatalk
---------- Post added at 11:10 PM ---------- Previous post was at 11:09 PM ----------
And never lost data on internal SD card
Sent from my XT907 using Tapatalk
sd_shadow said:
I think it depends on the version of RSD Lite and settings.
I've flashed d2, d2g, dx, dx2, d3, d4...
Without data wiped, from Flashing with RSD Lite.
Sent from my XT907 using Tapatalk
---------- Post added at 11:10 PM ---------- Previous post was at 11:09 PM ----------
And never lost data on internal SD card
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
I may have used an older version of RSDLite. Currently I have v5.7 and apparently it's not wiping data
I'm about to try a different version to see if I get the same results
Update
Josephdbrewer25 said:
I may have used an older version of RSDLite. Currently I have v5.7 and apparently it's not wiping data
I'm about to try a different version to see if I get the same results
Click to expand...
Click to collapse
@sd_shadow :update: I had 2 droid 2 motherboards, I put the other one in, reflashed SBF(both boards needed it) and it works! No reset was needed...I'm still A lil confused tho
Hi everyone, i have a problem with flashing my droid 2 a955
During flashing after 5 minutes RSD Lite writes: failed flashing process. Interface AP-OS: Error flashing subscriber unit. Device API Error: 0xE0030009 Adress:0xBD3CE000 Command: ADDR (0xE231009)
The phone shows Err:A5, 70, 70, 00, 1F
Bootloader 2.37
enko93 said:
Hi everyone, i have a problem with flashing my droid 2 a955
During flashing after 5 minutes RSD Lite writes: failed flashing process. Interface AP-OS: Error flashing subscriber unit. Device API Error: 0xE0030009 Adress:0xBD3CE000 Command: ADDR (0xE231009)
The phone shows Err:A5, 70, 70, 00, 1F
Bootloader 2.37
Click to expand...
Click to collapse
which firmware version
Sent from my DROID Turbo using XDA Labs
---------- Post added at 02:07 PM ---------- Previous post was at 02:05 PM ----------
try the D2 601 ezSBF
sd_shadow's [Collection] of Links for:
Droid 2 (a955)
Sent from my DROID Turbo using XDA Labs
Thank's) after flashing 1FF-p2a_droid2_cdma_droid2-user-2.3.4-4.5.1_57_DR4-51-120117-release-keys-signed-Verizon-US.sbf the phone is work
Before i tried 1FF-p2a_droid2_cdma_droid2-user-2.3.3-4.5.1_57_DR2-31-110719-release-keys-signed-Verizon-US.sbf and VRZ_A955_2.3.20_1FF_01.sbf
enko93 said:
Thank's) after flashing 1FF-p2a_droid2_cdma_droid2-user-2.3.4-4.5.1_57_DR4-51-120117-release-keys-signed-Verizon-US.sbf the phone is work
Before i tried 1FF-p2a_droid2_cdma_droid2-user-2.3.3-4.5.1_57_DR2-31-110719-release-keys-signed-Verizon-US.sbf and VRZ_A955_2.3.20_1FF_01.sbf
Click to expand...
Click to collapse
2.3.4 cannot be downgraded
if you try, you will get those errors
Sent from my DROID Turbo using XDA Labs
Thank's)
I have a problem again, after cm9 liquid i can't flash 1FF-p2a_droid2_cdma_droid2-user-2.3.4-4.5.1_57_DR4-51-120117-release-keys-signed-Verizon-US.sbf
VRZ_A955_2.3.20_1FF_01.sbf and 1FF-p2a_droid2_cdma_droid2-user-2.3.3-4.5.1_57_DR2-31-110719-release-keys-signed-Verizon-US.sbf doesn't work too
RSD lite shows: Inteface AP-OS:Error geting subscriber unit checsum. Device API Error: 0xE0030040 Comand: RQRCS (0xE4032040)
Phone shows: Err: A5,70,70,00,00
MEM_MAP Blank
Servive Req'd
enko93 said:
I have a problem again, after cm9 liquid i can't flash 1FF-p2a_droid2_cdma_droid2-user-2.3.4-4.5.1_57_DR4-51-120117-release-keys-signed-Verizon-US.sbf
VRZ_A955_2.3.20_1FF_01.sbf and 1FF-p2a_droid2_cdma_droid2-user-2.3.3-4.5.1_57_DR2-31-110719-release-keys-signed-Verizon-US.sbf doesn't work too
RSD lite shows: Inteface AP-OS:Error geting subscriber unit checsum. Device API Error: 0xE0030040 Comand: RQRCS (0xE4032040)
Phone shows: Err: A5,70,70,00,00
MEM_MAP Blank
Servive Req'd
Click to expand...
Click to collapse
which bootloader version?
Sent from my DROID Turbo using XDA Labs
---------- Post added at 10:16 PM ---------- Previous post was at 10:14 PM ----------
try the ezSBF
Sent from my DROID Turbo using XDA Labs
sd_shadow said:
which bootloader version?
Sent from my DROID Turbo using XDA Labs
---------- Post added at 10:16 PM ---------- Previous post was at 10:14 PM ----------
try the ezSBF
Sent from my DROID Turbo using XDA Labs
Click to expand...
Click to collapse
bootloader D2.37
i can't faind the D2 601 ezSBF in your list
enko93 said:
bootloader D2.37
i can't faind the D2 601 ezSBF in your list
Click to expand...
Click to collapse
https://docs.google.com/document/d/...q2P6QQOLjQ/mobilebasic#heading=h.604dofi4t9dx
Sent from my XT1080 using XDA Labs
Related
Hey guys i have a Droid X,
stuck onboot loader, i have tried to load the .621 SBF then tried the shadow SBF, both of them goes through all the way till the end and says error switching to BP. I remember fixing it before using .621 file but i cant seem to dig up the guide. can somone point in the right direction? I flash .621 it fails i wipe data/ cache and flash shadow it fails wipe data/cache. boot up and it only goes to boot loader
bootloader .04
thanks
error switching to bp, is usually a driver issue
check my list for driver errors or just use ezSBF 621
sd_shadow's [Collection] of Links for: Droid X (MB810)
DX (MB810) ezSBF & Root 2.3.4/4.5.621
Sent from my XT862 using Tapatalk 2
---------- Post added at 09:05 PM ---------- Previous post was at 09:04 PM ----------
are you sure it says
bootloader .04 ?
Sent from my XT862 using Tapatalk 2
---------- Post added at 09:08 PM ---------- Previous post was at 09:05 PM ----------
should be bootloader 30.04
Sent from my XT862 using Tapatalk 2
Hello,
I installed the 4.3 android unofficial CM 10.2 version successfully to my tablet.
I then realized that I did not install gapps, so when I flashed gaps it got stuck in boot loop.
I have tried formatting /system and reinstalling the rom but with no success.
If anyone could help me that would be great!
solhasse said:
Hello,
I installed the 4.3 android unofficial CM 10.2 version successfully to my tablet.
I then realized that I did not install gapps, so when I flashed gaps it got stuck in boot loop.
I have tried formatting /system and reinstalling the rom but with no success.
If anyone could help me that would be great!
Click to expand...
Click to collapse
Reflash the v9 boot loader, flash Rom, flash gapps.
Sent from my HTC_PN071 using Tapatalk
dibb_nz said:
Reflash the v9 boot loader, flash Rom, flash gapps.
Sent from my HTC_PN071 using Tapatalk
Click to expand...
Click to collapse
Sorry for the stupid question, but what do you mean by v9 boot loader?
U can't flash any custom Rom without it...unless its a tegra-owners rom in which case you'll get more help on their forum
Sent from my HTC_PN071 using Tapatalk
dibb_nz said:
U can't flash any custom Rom without it...unless its a tegra-owners rom in which case you'll get more help on their forum
Sent from my HTC_PN071 using Tapatalk
Click to expand...
Click to collapse
Haha ofc!
But... I reinstalled my bootloader but I am still stuck on the bootloop after flashing the rom
UPDATE: Now I am stuck on the boot logo, so I got that going for me which is nice
Weird...check the Rom thread for similar issues andflash a different one to isolate the problem
Sent from my HTC_PN071 using Tapatalk
---------- Post added at 02:55 PM ---------- Previous post was at 02:52 PM ----------
Or boot into recovery and format data/media, you need to enable that option in mounts and storage. This always needs to be done when flashing from one rom to another. It will erase all data on yr tab
Sent from my HTC_PN071 using Tapatalk
dibb_nz said:
Weird...check the Rom thread for similar issues andflash a different one to isolate the problem
Sent from my HTC_PN071 using Tapatalk
---------- Post added at 02:55 PM ---------- Previous post was at 02:52 PM ----------
Or boot into recovery and format data/media, you need to enable that option in mounts and storage. This always needs to be done when flashing from one rom to another. It will erase all data on yr tab
Sent from my HTC_PN071 using Tapatalk
Click to expand...
Click to collapse
Omg thank you so so much. the data/media format worked like a charm. Such a little thing can cause such a big problem... hehe
Thanks for taking the time to help me!
I recently found my old Droid Razr M and I want to install Cyanogenmod 12 so I can run Lollipop on it, does anyone know if I can do that or what I'm doing wrong? I am also using SafeStrap 3.75
AndroidDude7 said:
I recently found my old Droid Razr M and I want to install Cyanogenmod 12 so I can run Lollipop on it, does anyone know if I can do that or what I'm doing wrong? I am also using SafeStrap 3.75
Click to expand...
Click to collapse
No
3.75? Full filename?
Sent from my XT907 using Tapatalk
---------- Post added at 02:52 PM ---------- Previous post was at 02:52 PM ----------
Current system version?
Sent from my XT907 using Tapatalk
I used SafeStrap-debug.apk that is version 3.75 and I am running KitKat 4.4.2
AndroidDude7 said:
I used SafeStrap-debug.apk that is version 3.75
Click to expand...
Click to collapse
from http://droid.cs.fau.de/Safestrap/debug-build/ if so that's for the XT912 Droid Razr not the XT907 Droid Razr M, two different devices.
sd_shadow said:
No
3.75? Full filename?
Sent from my XT907 using Tapatalk
---------- Post added at 02:52 PM ---------- Previous post was at 02:52 PM ----------
Current system version?
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
I installed th apk file: SafeStrap-debug.apk and I'm on 183.46.15
AndroidDude7 said:
I am running KitKat 4.4.2
Click to expand...
Click to collapse
that's the android version, if you have system version 183.46.15 there is no custom recovery that is compatible with custom roms at this time.
sd_shadow said:
that's the android version, if you have system version 183.46.15 there is no custom recovery that is compatible with custom roms at this time.
Click to expand...
Click to collapse
Ok I am on 183.46.15 so that means I can't use safestrap and I have no chance of getting a ROM at all? Correct?
AndroidDude7 said:
Ok I am on 183.46.15 so that means I can't use safestrap and I have no chance of getting a ROM at all? Correct?
Click to expand...
Click to collapse
That is correct.
Sent from my Moto X 2014 Pure Edition using Tapatalk
AndroidDude7 said:
Ok I am on 183.46.15 so that means I can't use safestrap and I have no chance of getting a ROM at all? Correct?
Click to expand...
Click to collapse
Just root it and debloat it.
Sent from my Nexus 5
RikRong said:
Just root it and debloat it.
Click to expand...
Click to collapse
Just did that with one and its faster than my Droid 4 on 12.1. I also installed Adblock Plus (on the system level) and xprivacy.
Might install AFWall down the road, but not for now.
Aaron Z
Been reading and cant find a definitive answer so any help would be awesome.
I have a Verizon RAZR M 4.4.2 183.46.15, I have S-Off through Sunshine, rooted and TWRP installed. Somewhere through the process I lost all back ups and even stock images. I have tried several ROMS and none will get bast the boot loader screen. What I am wanting to try is an SBF back to 183.46.15 stock and go from there.
If I do this and SBF back to stock will I loose S-Off and have to spend $25. more to regain S-Off or is S-Off permanent? Or should I SBF to an older version? Links to SBF files are also welcome
Thanks in advance for an info.
malloneem said:
If I do this and SBF back to stock.. .
Click to expand...
Click to collapse
see what is .sbf ?
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my KFFOWI using XDA Labs
---------- Post added at 04:33 AM ---------- Previous post was at 04:29 AM ----------
malloneem said:
I have S-Off through Sunshine
Click to expand...
Click to collapse
with Motorola Devices it's just an unlocked bootloader
Sent from my KFFOWI using XDA Labs
---------- Post added at 04:36 AM ---------- Previous post was at 04:33 AM ----------
s-off vs unlocked bootloader
https://m.facebook.com/story.php?story_fbid=10152887971775425&id=282458735424
Sent from my KFFOWI using XDA Labs
---------- Post added at 04:39 AM ---------- Previous post was at 04:36 AM ----------
malloneem said:
to regain S-Off or is S-Off permanent?
Click to expand...
Click to collapse
once unlocked bootloader cannot be relocked
Sent from my KFFOWI using XDA Labs
---------- Post added at 04:40 AM ---------- Previous post was at 04:39 AM ----------
malloneem said:
I have tried several ROMS and none will get bast the boot loader screen.
Click to expand...
Click to collapse
likely not using correct twrp version
Sent from my KFFOWI using XDA Labs
---------- Post added at 04:46 AM ---------- Previous post was at 04:40 AM ----------
post twrp version you are using
full filename and link
rom you want, with link
Sent from my KFFOWI using XDA Labs
Everything is working again after flashing a recovery with RSD. However i'e tried several custom roms and all of them never get past the boot loader screen. CM 12.1, Bliss pop and Dirty Unicorn, I'm really not picky just looking for a stable ROM.
RAZR M - Unlocked - Rooted 4.4.2 - 183.46.15 - TWRP v2.8.5.0 installed.
So i just bought this phone from my friend and when he had it, it ran like a dream. However after i got it and factory reset it, it dies constantly. It'll say it has like 28% and then very quickly will change to 0% and power off. When I power it back on however it claims it still has the 28% and will last another 2-3 % before shutting off again. Why is this happening??? Any help would be much appreciated.
P.S. Ive tried factory resetting it again and wiping the cache, neither have worked.
rye2053 said:
So i just bought this phone from my friend and when he had it, it ran like a dream. However after i got it and factory reset it, it dies constantly. It'll say it has like 28% and then very quickly will change to 0% and power off. When I power it back on however it claims it still has the 28% and will last another 2-3 % before shutting off again. Why is this happening??? Any help would be much appreciated.
P.S. Ive tried factory resetting it again and wiping the cache, neither have worked.
Click to expand...
Click to collapse
Try a different charger
sd_shadow said:
Try a different charger
Click to expand...
Click to collapse
I have tried 3 different chargers.
rye2053 said:
I have tried 3 different chargers.
Click to expand...
Click to collapse
Bootloader unlocked?
Sent from my perry_f using XDA Labs
sd_shadow said:
Bootloader unlocked?
Sent from my perry_f using XDA Labs
Click to expand...
Click to collapse
I tried unlocking it but when I got to the final part and pasted my 5 lines of device ID like it says, I get a message saying that my bootloader cant be unlocked.
rye2053 said:
I tried unlocking it but when I got to the final part and pasted my 5 lines of device ID like it says, I get a message saying that my bootloader cant be unlocked.
Click to expand...
Click to collapse
Which model number?
Sent from my PH-1 using Tapatalk
sd_shadow said:
Which model number?
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
XT 1565. Is that what you're asking for?
rye2053 said:
XT 1565. Is that what you're asking for?
Click to expand...
Click to collapse
Verizon branded (Droids) cannot be bootloader unlocked via Official Motorola site.
Sent from my PH-1 using XDA Labs
---------- Post added at 06:15 PM ---------- Previous post was at 06:13 PM ----------
You could try reflashing firmware via RSD Lite or Fastboot.exe
Make sure you flash same firmware or newer, downgrading can brick some Droids
Sent from my PH-1 using XDA Labs
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my PH-1 using XDA Labs
sd_shadow said:
Verizon branded (Droids) cannot be bootloader unlocked via Official Motorola site.
Sent from my PH-1 using XDA Labs
---------- Post added at 06:15 PM ---------- Previous post was at 06:13 PM ----------
You could try reflashing firmware via RSD Lite or Fastboot.exe
Make sure you flash same firmware or newer, downgrading can brick some Droids
Sent from my PH-1 using XDA Labs
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my PH-1 using XDA Labs
Click to expand...
Click to collapse
Could I potentially flash something like lineage OS instead of stock firmware? Thats the mod that I would really like on my droid if possible and if it could also fix the problem that would be nice.
rye2053 said:
Could I potentially flash something like lineage OS instead of stock firmware? Thats the mod that I would really like on my droid if possible and if it could also fix the problem that would be nice.
Click to expand...
Click to collapse
No custom roms with locked bootloader.
Sent from my PH-1 using Tapatalk
sd_shadow said:
No custom roms with locked bootloader.
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
I can't get the default firmware to flash. It keeps ending at 3/26. Could you go into depth on how and where I should get the stock rom and installing it?
sd_shadow said:
No custom roms with locked bootloader.
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
Also how would I go about unlocking the bootloader on a Verizon phone?
Need firmwere of droid maxx 2 (7.1.1 nougat)
rye2053 said:
I can't get the default firmware to flash. It keeps ending at 3/26. Could you go into depth on how and where I should get the stock rom and installing it?
Click to expand...
Click to collapse
i need firmware of droid maxx 2 (7.1.1 nougat),, could you please send m the link.??
HM TALHA said:
i need firmware of droid maxx 2 (7.1.1 nougat),, could you please send m the link.??
Click to expand...
Click to collapse
See links in
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my Atom using XDA Labs